Competing land uses and fossil fuel,and optimal energy conversion rates during the transition toward a green economy under a pollution stock constraint

We study the transition to a carbon-free economy in a model with a polluting non-renewable resource and a clean renewable resource. Transforming primary energy into ready-to-use energy services is costly and more efficient energy transformation rates are more costly to achieve. Renewable energy competes with food production for land and the food productivity of land can be improved at some cost. To avoid catastrophic climate damages, the pollution stock is mandated to stay below a given cap. When the economy is not constrained by the cap, the efficiency of energy transformation increases steadily until the transition toward the ultimate green economy; when renewable energy is exploited, its land use rises at the expense of food production; food productivity increases together with the land rent but food production drops; the food and energy prices increase and renewables substitute for non-renewable energy. During the constrained phase, the economy follows a constant path of prices, quantities, efficiency rates, food productivity and land rent, a phenomenon we call the ‘ceiling efficiency paradox’.     

Economic aspects of natural resource exploitation

Low entropy accumulations of matter and energy are more economic for humans to exploit as natural resources. This accumulation of a resource takes place over time and the most concentrated resources, such as fossil fuels, are created over geological ages. As the most concentrated resources become depleted it may be possible for technology to enable the exploitation of less concentrated resources, such as low-grade metal ores or thinly populated fishing grounds. Analysis of the timescales necessary to create different types of natural resource reveals three distinct groups. Further consideration of economic characteristics of resources, including ownership and access, and rate of consumption relative to rate of supply confirms the grouping of resources into the three distinct groups. Rate of change of entropy as a resource is exploited is an indicator of its impact on the environment. Consideration of this again suggests three distinct groups of resources, and this paper identifies them as: continuous natural resources (CNR), such as solar power and wind power; potentially renewable resources (PRR), such as fish and forests; and non-renewable resources (NRR), such as fossil fuels and metals.     

Models of withdrawing renewable and non-renewable resources based on Odum's energy systems theory and Daly's quasi-sustainability principle

This paper presents a theoretical model of withdrawing resources based on Odum's energy systems diagrams. According to the theory of a general pulsing principle, withdrawing resources changes in time shifting from the initial phases of growth and maturity to the phases of descent and low energy restoration. A simulation was performed in order to hypothesize potential future trends of withdrawing renewable and non-renewable resources and to show some aspects of their sustainability–unsustainability, respectively. According to Odum's theory, after the rapid growth of the last century, our civilization is living in a climax transition phase and it is now approaching a descent phase. A “way down” will be necessary due to the exhaustion of non-renewable and to the limited use of renewable resources. An integrated “renew–non-renew” model was developed by Odum to show how a “business as usual” trend will bring us to a drastic transition to a world that uses scarce renewable resources. Nevertheless, a different choice is possible, based on Daly's concept of quasi-sustainability that can inspire a new model. The latter argued that the exploitation of a non-renewable resource must be paired with a compensating investment in a renewable substitute. Our model shows that we can use non-renewable resources better to considerably improve our capacity of capturing renewable resources in the future. We present this as a necessary condition to address a sustainable environmental policy.     

Frontier science and challenges on offshore carbon storage

● The main direct seal up carbon options and challenges are reviewed. ● Ocean-based CO₂ replacement for CH₄/oil exploitation is presented. ● Scale-advantage of offshore CCS hub is discussed. Carbon capture and storage (CCS) technology is an imperative, strategic, and constitutive method to considerably reduce anthropogenic CO₂ emissions and alleviate climate change issues. The ocean is the largest active carbon bank and an essential energy source on the Earth’s surface. Compared to oceanic nature-based carbon dioxide removal (CDR), carbon capture from point sources with ocean storage is more appropriate for solving short-term climate change problems. This review focuses on the recent state-of-the-art developments in offshore carbon storage. It first discusses the current status and development prospects of CCS, associated with the challenges and uncertainties of oceanic nature-based CDR. The second section outlines the mechanisms, sites, advantages, and ecologic hazards of direct offshore CO₂ injection. The third section emphasizes the mechanisms, schemes, influencing factors, and recovery efficiency of ocean-based CO₂-CH₄ replacement and CO₂-enhanced oil recovery are reviewed. In addition, this review discusses the economic aspects of offshore CCS and the preponderance of offshore CCS hubs. Finally, the upsides, limitations, and prospects for further investigation of offshore CO₂ storage are presented.     

Non-cooperative and cooperative climate policies with anticipated breakthrough technology

Global warming can be curbed by pricing carbon emissions and thus substituting fossil fuel with renewable energy consumption. Breakthrough technologies (e.g., fusion energy) can reduce the cost of such policies. However, the chance of such a technology coming to market depends on investment. We model breakthroughs as an irreversible tipping point in a multi-country world, with different degrees of international cooperation. We show that international spill-over effects of R&D in carbon-free technologies lead to double free-riding, strategic over-pollution and underinvestment in green R&D, thus making climate change mitigation more difficult. We also show how the demand structure determines whether carbon pricing and R&D policies are substitutes or complements.     

Optimal abatement of carbon emission flows

We study optimal carbon capture and storage (CCS) from point sources, taking into account damages incurred from the accumulation of carbon in the atmosphere and exhaustibility of fossil fuel reserves. High carbon concentrations call for full CCS, meaning zero net emissions. We identify conditions under which partial or no CCS is optimal. In the absence of CCS the CO2 stock might be inverted U-shaped. With CCS more complicated behavior may arise. It can be optimal to have full capture initially, yielding a decreasing stock, then partial capture while keeping the CO2 stock constant, and a final phase without capture but with an inverted U-shaped CO2 stock. We also introduce the option of adaptation and provide a unified theory regarding the optimal use of CCS and adaptation.     

Synthesis and spatial dynamics of socio-economic metabolism and land use change of Taipei Metropolitan Region

Ever since the concept of metabolism was extended from biological science by social scientists to analyze human systems, socio-economic metabolism has been extensively applied to explore resource consumption, asset accumulation, waste emissions, and complex processes of land use change in a socio-economic system. Current research in socio-economic metabolism and land use change has used accounting approaches for macroscopic comparisons of countries and regions. However, socio-economic metabolism has seldom been applied to the analysis of land use change. To simulate the spatial-temporal dynamics of socio-economic metabolism and land use change, this study adopts a spatial system modeling method to develop a Socio-Economic Metabolism and Land Use Change (SEMLUC) model for the Taipei Metropolitan Region. The simulation results illustrate that the Taipei Metropolitan Region is highly dependent on inflows of non-renewable energy and exhibits a spatial hierarchy of non-renewable energy consumption centering on Taipei's Main station. Additionally, urban assets provide feedback to natural and agricultural systems to extract additional resource inflows which, driven by the maximum power principle, accelerate the convergence of energy flows toward urban assets. Accumulating urban assets also facilitates inflows of non-renewable material to nearby cells thereby enhancing land use conversion to urban areas. This work also demonstrates the capability of ArcGIS software in simulating socio-economic metabolism and land use change in an urban system.     

Up to 95 % reduction of chemical oxygen demand of slaughterhouse effluents using Fenton and photo-Fenton oxidation

Meat industries produce effluents containing high concentrations of organic and inorganic compounds, which must be removed before being discharged or reused. Advanced oxidation processes using Fenton reaction coupled with UV, solar radiation, and electrochemical oxidation are promising methods. Here, we treated the effluent from an anaerobic digester using: (a) the photoelectro-Fenton process, using a system with a Ti-RuO₂ anode and a carbon felt cathode, (b) the solar photo-Fenton process, using a batch reactor and a compound parabolic collector, and (c) a combination of Fenton and solar photo-Fenton processes. The effluent had an initial chemical oxygen demand (COD) of 1159 mgL^?1, and we obtained high removal efficiencies of COD, up to 95 %, using the combination of Fenton and solar photo-Fenton processes.     

Coal utilization in China: environmental impacts and human health

Coal is one of the major energy resources in China, accounting for approximately 70 % of primary energy consumption. Many environmental problems and human health risks arise during coal exploitation, utilization, and waste disposal, especially in the remote mountainous areas of western China (e.g., eastern Yunnan, western Guizhou and Hubei, and southern Shaanxi). In this paper, we report a thorough review of the environmental and human health impacts related to coal utilization in China. The abundance of the toxic trace elements such as F, As, Se, and Hg in Chinese coals is summarized. The environmental problems (i.e., water, soil, and air pollution) that are related to coal utilization are outlined. The provenance, distributions, typical symptoms, sources, and possible pathways of endemic fluorosis, arsenism, and selenosis due to improper coal usage (briquettes mixed with high-F clay, mineralized As-rich coal, and Se-rich stone coal) are discussed in detail. In 2010, 14.8, 1.9 million, and 16,000 Chinese people suffered from dental fluorosis, skeletal fluorosis, and arsenism, respectively. Finally, several suggestions are proposed for the prevention and treatment for endemic problems caused by coal utilization.     

Technological influences and abatement strategies for industrial sulphur dioxide in China

Industrial SO₂ is the most important air pollutant in China. This paper outlines the technological impacts on industrial SO₂ emissions in China in terms of: amount, intensity, structure of energy consumption and structure of energy-intensive industries. It shows that industrial SO₂ emissions have linear growth alongside increases in energy consumption, particularly the rise in coal consumption. The contribution of technological factors to decreases in the intensity of energy consumption is 25%, while the structural factor is 75%. The power industry accounts for 52.6% of total industrial SO₂. Optimisation of the structure of energy consumption can reduce SO₂ emissions by 1.98 million tonnes per year. We propose the following technological strategies for industrial SO₂ abatement: adjustment of the system and structure of thermal power generating units, acceleration of flue gas desulphurisation projects, transformation of industrial structures, development of eco-industries and a reduction in energy consumption per unit product. In addition, an effective way to abate industrial SO₂ emissions is to promote governance strategies to stricly enforce SO₂ emission standards, conduct emission trading, and formulate incentives for encouraging cleaner production and clean energy development.     

Wastewater treatment meets artificial photosynthesis: Solar to green fuel production,water remediation and carbon emission reduction

• Mitigating energy utilization and carbon emission is urgent for wastewater treatment. • MPEC integrates both solar energy storage and wastewater organics removal. • Energy self-sustaining MPEC allows to mitigate the fossil carbon emission. • MPEC is able to convert CO₂ into storable carbon fuel using renewable energy. • MPEC would inspire photoelectrochemistry by employing a novel oxidation reaction. Current wastewater treatment (WWT) is energy-intensive and leads to vast CO₂ emissions. Chinese pledge of “double carbon” target encourages a paradigm shift from fossil fuels use to renewable energy harvesting during WWT. In this context, hybrid microbial photoelectrochemical (MPEC) system integrating microbial electrochemical WWT with artificial photosynthesis (APS) emerges as a promising approach to tackle water-energy-carbon challenges simultaneously. Herein, we emphasized the significance to implement energy recovery during WWT for achieving the carbon neutrality goal. Then, we elucidated the working principle of MPEC and its advantages compared with conventional APS, and discussed its potential in fulfilling energy self-sustaining WWT, carbon capture and solar fuel production. Finally, we provided a strategy to judge the carbon profit by analysis of energy and carbon fluxes in a MPEC using several common organics in wastewater. Overall, MPEC provides an alternative of WWT approach to assist carbon-neutral goal, and simultaneously achieves solar harvesting, conversion and storage.     

区域能源碳足迹计算模型比较研究——以湖北省为例

能源消费排放是最主要的碳排放来源,研究能源碳足迹重要理论和现实意义。如何准确计算和表征能源碳足迹的大小成为该研究领域的重要问题。在文献回顾的基础上,文章总结了3种目前应用较广泛的计算区域能源消费碳足迹的方法和模型,它们分别是碳汇法、净初级生产力改进模型和净生态系统生产力改进模型。分别介绍了其计算公式、输入参数和计算过程。以湖北省1998-2009年能源消费碳足迹的计算为例,分别用这几种方法计算了能源消费碳足迹的总量和人均碳足迹。得到的主要结论有：研究区域能源消费碳排放量增长较快,3种方法和模型计算得到的碳足迹总量和人均量从时间序列上看,整体变化趋势一致,碳足迹亦呈现快速增长。但3种模型计算出的碳足迹大小差异较大,碳汇法模型足迹最大,净生态系统生产力改进模型次之,净初级生产力改进模型结果最小,并且碳汇法的计算结果明显大于其他两种模型。计算结果差异的原因在于,传统碳汇法模型只考虑林地的碳吸收能力,忽略了区域其他用地类型的碳吸收能力。净初级生产力改进模型考虑了各种用地类型的吸收能力,但从生态系统来说忽略了异氧呼吸的碳释放,高估了区域的碳吸收能力。几种模型都运用了固定值或者平均统计量,未能考虑地域差异,同时未考虑各统计量随时间和气候等变化而变化的可能,存在一定的不合理性,这也是今后研究值得深人研究的方向。     

Announcing climate policy: Can a green paradox arise without scarcity?

Unintended consequences of a pre-announced climate policy are studied within a framework that allows for competition between polluting and clean energy sources. We show that early announcement of a carbon tax gives rise to a “green-paradox,” in that it increases emissions in the interim period (between announcement and actual implementation), irrespective of the scarcity of fossil fuels. The paradoxical outcome is driven by consumption-saving tradeoffs facing households who seek to smooth consumption over time and holds both when the announced implementation date is taken as a credible threat and when households are skeptical about the (political) will or capability of the government to implement the policy as announced.     

Reassessment of the Ocean-To-Atmosphere Flux of Carbon Monoxide

Carbon monoxide (CO) in the surface sea waters is produced predominantly by photochemical processes, oxidized by micro-organisms and outgassed to the atmosphere. to assess carbon monoxide flux from the oceans to the atmosphere, the photochemical production and microbial oxidation of carbon monoxide in the oceanic mixed-layer was investigated during several oeanographic cruises and in the laboratory. the photoproduction rate of carbon monoxide was found to be well correlated to the concentration of dissolved organic carbon (DOC) in coastal and open ocean surface waters. Taking a global average carbon monoxide production rate of 10 ± 2 nmole litre^-1 (mg DOC hr)^-1 in the surface open ocean water, and 25 ± 7 nmole litre^-1 (mg DOC hr)^-1 in coastal sea water, at cloud-free summer solar noon, the photochemical production of carbon monoxide in the global oceans is estimated to be at a rate of 1200 ± 200 Tg CO y^-1. the microbial carbon monoxide turnover time in the mixed-layer was observed to range from hours in a coastal estuary to 16 days in the Pacific along 1057deg; W in dark incubations. Natural sunlight can largely inhibit the microbial consumption of carbon monoxide in surface water. On a global scale, microbial consumption is responsible for the loss of less than 10% of photochemical produced carbon monoxide in the surface ocean. Field measurements have shown that the net transport of carbon monoxide from the euphotic zone to the underlying deeper ocean water is limited and that the overall life time in surface sea waters is less than 3-4 hours. When combined, these field measurements with the photoproduction and microbial consumption rates obtained, we estimate the oceanic flux to the atmosphere is about 1000 ± 200 Tg CO y^-1, which represents the largest single source of atmospheric carbon monoxide.     

Single particle analysis of ambient aerosols in Shanghai during the World Exposition, 2010: two case studies

ATSI Model 3800 aerosol time-of-flight mass spectrometer (ATOFMS) was deployed for single-particle analysis in Shanghai during the World Exposition (EXPO), 2010. Measurements on two extreme cases: polluted day (1st May) and clean day (25th September) were compared to show how meteorological conditions affected the concentration and composition of ambient aerosols. Mass spectra of 90496 and 50407 particles were analyzed respectively during the two sampling periods. The ART-2a neural network algorithm was applied to sort the collected particles. Seven major classes of particles were obtained: dust, sea salt, industrial, biomass burning, organic carbon (OC), elementary carbon (EC), and NH₄-rich particles. Number concentration of ambient aerosols showed a strong anti-correlation with the boundary layer height variation. The external mixing states of aerosols were quite different during two sampling periods because of different air parcel trajectories. Number fraction of biomass burning particles (43.3%) during polluted episode was much higher than that (21.6%) of clean time. Air parcels from the East China Sea on clean day diluted local pollutant concentration and increased the portion of sea salt particle dramatically (13.3%). The large contribution of biomass burning particles in both cases might be an indication of a constant regional background of biomass burning emission. Mass spectrum analysis showed that chemical compositions and internal mixing states of almost all the particle types were more complicate during polluted episode compared with those observed in clean time. Strong nitrate signals in the mass spectra suggested that most of the particles collected on polluted day had gone through some aging processes before reaching the sampling site.     

Reassessment of the Ocean-To-Atmosphere Flux of Carbon Monoxide

Abstract

Carbon monoxide (CO) in the surface sea waters is produced predominantly by photochemical processes, oxidized by micro-organisms and outgassed to the atmosphere. to assess carbon monoxide flux from the oceans to the atmosphere, the photochemical production and microbial oxidation of carbon monoxide in the oceanic mixed-layer was investigated during several oeanographic cruises and in the laboratory. the photoproduction rate of carbon monoxide was found to be well correlated to the concentration of dissolved organic carbon (DOC) in coastal and open ocean surface waters. Taking a global average carbon monoxide production rate of 10 ± 2 nmole litre^?1 (mg DOC hr)^?1 in the surface open ocean water, and 25 ± 7 nmole litre^?1 (mg DOC hr)^?1 in coastal sea water, at cloud-free summer solar noon, the photochemical production of carbon monoxide in the global oceans is estimated to be at a rate of 1200 ± 200 Tg CO y^?1. the microbial carbon monoxide turnover time in the mixed-layer was observed to range from hours in a coastal estuary to 16 days in the Pacific along 1057deg; W in dark incubations. Natural sunlight can largely inhibit the microbial consumption of carbon monoxide in surface water. On a global scale, microbial consumption is responsible for the loss of less than 10% of photochemical produced carbon monoxide in the surface ocean. Field measurements have shown that the net transport of carbon monoxide from the euphotic zone to the underlying deeper ocean water is limited and that the overall life time in surface sea waters is less than 3-4 hours. When combined, these field measurements with the photoproduction and microbial consumption rates obtained, we estimate the oceanic flux to the atmosphere is about 1000 ± 200 Tg CO y^?1, which represents the largest single source of atmospheric carbon monoxide.     

Key role for nuclear energy in global biodiversity conservation

Modern society uses massive amounts of energy. Usage rises as population and affluence increase, and energy production and use often have an impact on biodiversity or natural areas. To avoid a business‐as‐usual dependence on coal, oil, and gas over the coming decades, society must map out a future energy mix that incorporates alternative sources. This exercise can lead to radically different opinions on what a sustainable energy portfolio might entail, so an objective assessment of the relative costs and benefits of different energy sources is required. We evaluated the land use, emissions, climate, and cost implications of 3 published but divergent storylines for future energy production, none of which was optimal for all environmental and economic indicators. Using multicriteria decision‐making analysis, we ranked 7 major electricity‐generation sources (coal, gas, nuclear, biomass, hydro, wind, and solar) based on costs and benefits and tested the sensitivity of the rankings to biases stemming from contrasting philosophical ideals. Irrespective of weightings, nuclear and wind energy had the highest benefit‐to‐cost ratio. Although the environmental movement has historically rejected the nuclear energy option, new‐generation reactor technologies that fully recycle waste and incorporate passive safety systems might resolve their concerns and ought to be more widely understood. Because there is no perfect energy source however, conservation professionals ultimately need to take an evidence‐based approach to consider carefully the integrated effects of energy mixes on biodiversity conservation. Trade‐offs and compromises are inevitable and require advocating energy mixes that minimize net environmental damage. Society cannot afford to risk wholesale failure to address energy‐related biodiversity impacts because of preconceived notions and ideals.     

Life cycle assessment and sustainable engineering in the context of near net shape grown components: striving towards a sustainable way of future production

Technical product harvesting (TEPHA) is a newly developing interdisciplinary approach in which bio-based production is investigated from a technical and ecological perspective. Society‘s demand for ecologically produced and sustainably operable goods is a key driver for the substitution of conventional materials like metals or plastics through bio-based alternatives. Technical product harvesting of near net shape grown components describes the use of suitable biomass for the production of technical products through influencing the natural shape of plants during their growth period. The use of natural materials may show positive effects on the amount of non-renewable resource consumption. This also increases the product recyclability at the end of its life cycle. Furthermore, through the near net shape growth of biomass, production steps can be reduced. As a consequence such approaches may save energy and the needed resources like crude oil, coal or gas. The derived near net shape grown components are not only considered beneficial from an environmental point of view. They can also have mechanical advantages through an intrinsic topology optimization in contrast to common natural materials, which are influenced in their shape after harvesting. In order to prove these benefits a comprehensive, interdisciplinary scientific strategy is needed. Here, both mechanical investigations and life cycle assessment as a method of environmental evaluation are used.     

青海省干旱半干旱地区农村的能源问题

以青海省为例，探讨了我国西北干旱、半干旱地区农村的能源问题及其对自然生态环境的影响。针对青海省农村由于能源消费结构不合理，商品能源供应不足，生活能源利用率低下，可再生能源资源破坏严重等特点所引发的生态环境问题和社会问题，提出了解决青海省农村能源问题，保护生态环境的对策建议。     

The capital gains from trade are not enough: evidence from the environmental accounts of Venezuela and Mexico

In principle, a country cannot endure negative genuine savings for long periods of time without experiencing declining consumption. Nevertheless, theoreticians envisage two alternatives to explain how an exporter of non-renewable natural resources could experience permanent negative genuine savings and still ensure sustainability. The first one alleges that the capital gains arising from the expected improvement in the terms of trade would suffice to compensate for the negative savings of the resource exporter. The second alternative points at technological change as a way to avoid economic collapse. This paper uses the data of Venezuela and Mexico to empirically test the first of these two hypotheses. The results presented here prove that the terms of trade do not suffice to compensate the depletion of oil reserves in these two open economies.