Toyota drivers' experiences with Dynamic Radar Cruise Control,Pre-Collision System,and Lane-Keeping Assist

IntroductionAdvanced crash avoidance and driver assistance technologies potentially can prevent or mitigate many crashes. Previous surveys with drivers have found favorable opinions for many advanced technologies; however, these surveys are not necessarily representative of all drivers or all systems. As the technologies spread throughout the vehicle fleet, it is important to continue studying driver acceptance and use of them.MethodThis study focused on 2010–2013 Toyota Sienna and Prius models that were equipped with adaptive cruise control, forward collision avoidance, and lane departure warning and prevention (Prius models only). Telephone interviews were conducted in summer 2013 with 183 owners of vehicles with these technologies.ResultsAbout 9 in 10 respondents wanted adaptive cruise control and forward collision avoidance on their next vehicle, and 71% wanted lane departure warning/prevention again. Males and females reported some differences in their experiences with the systems; for example, males were more likely to have turned on lane departure warning/prevention than females, and when using this system, males reported more frequent warnings than did females. Relative to older drivers, drivers age 40 and younger were more likely to have seen or heard a forward collision warning.ConclusionsConsistent with the results in previous surveys of owners of luxury vehicles, the present survey found that driver acceptance of the technologies was high, although less so for lane departure warning/prevention. Experiences with the Toyota systems differed by driver age and gender to a greater degree than in previous surveys, suggesting that the responses of drivers may begin to differ as crash avoidance technology becomes available on a wider variety of vehicles.Practical applicationCrash avoidance technologies potentially can prevent or mitigate many crashes, but their success depends in part on driver acceptance. These systems will be effective only to the extent that drivers use them.     

Field effectiveness evaluation of advanced driver assistance systems

Abstract

Objective: Advanced driver assistance systems (ADAS) are a class of vehicle technologies designed to increase safety by providing drivers with timely warnings and autonomously intervening to avoid hazardous situations. Though laboratory testing suggests that ADAS technologies will greatly impact crash involvement rates, real-world evidence that characterizes their effectiveness is still limited. This study evaluates and quantifies the association of ADAS technologies with the likelihood of a moderate or severe crash for new-model BMWs in the United States.

Methods: Vehicle ADAS option information for the cohort of model year 2014 and later BMW passenger vehicles sold after January 1, 2014 (n?=?1,063,503), was coded using VIN-identified options data. ADAS technologies of interest include frontal collision warning with autonomous emergency braking, lane departure warning, and blind spot detection. BMW Automated Crash Notification system data (from January 2014 to November 2017) were merged with vehicle data by VIN to identify crashed vehicles (n?=?15,507), including date, crash severity (delta V), and area of impact. Using Cox proportional hazards regression modeling, the study calculates the adjusted hazard ratio for crashing among BMW passenger vehicles with versus without ADAS technologies. The adjusted percentage reduction in moderate and severe crashes associated with ADAS is interpreted as one minus the hazard ratio.

Results: Vehicles equipped with both autonomous emergency braking and lane departure warning were 23% less likely to crash than those not equipped (hazard ratio [HR]?=?0.77; 95% confidence interval [CI], 0.73–0.81), controlling for model year, vehicle size and body type. Autonomous emergency braking and lane departure warning generally occur together, making it difficult to tease apart their individual effects. Blind spot detection was associated with a 14% reduction in crashes after controlling for the presence of autonomous emergency braking and lane departure warning (HR =0.86; 95% CI, 0.744–0.99). Differences were observed by vehicle type and crash type. The combined effect of autonomous emergency braking and lane departure warning was greater in newer model vehicles: Equipped vehicles were 13% less likely to crash (HR =0.87; 95% CI, 0.79–0.95) among 2014 model year vehicles versus 34% less likely to crash (HR =0.66; 95% CI, 0.57–0.77) among 2017 model year vehicles.

Conclusion: This robust cohort study contributes to the growing evidence on the effectiveness of ADAS technologies.     

Motorcycle crashes potentially preventable by three crash avoidance technologies on passenger vehicles

Objective: The objective of this study was to identify and quantify the motorcycle crash population that would be potential beneficiaries of 3 crash avoidance technologies recently available on passenger vehicles.

Methods: Two-vehicle crashes between a motorcycle and a passenger vehicle that occurred in the United States during 2011–2015 were classified by type, with consideration of the functionality of 3 classes of passenger vehicle crash avoidance technologies: frontal crash prevention, lane maintenance, and blind spot detection. Results were expressed as the percentage of crashes potentially preventable by each type of technology, based on all known types of 2-vehicle crashes and based on all crashes involving motorcycles.

Results: Frontal crash prevention had the largest potential to prevent 2-vehicle motorcycle crashes with passenger vehicles. The 3 technologies in sum had the potential to prevent 10% of fatal 2-vehicle crashes and 23% of police-reported crashes. However, because 2-vehicle crashes with a passenger vehicle represent fewer than half of all motorcycle crashes, these technologies represent a potential to avoid 4% of all fatal motorcycle crashes and 10% of all police-reported motorcycle crashes.

Discussion: Refining the ability of passenger vehicle crash avoidance systems to detect motorcycles represents an opportunity to improve motorcycle safety. Expanding the capabilities of these technologies represents an even greater opportunity. However, even fully realizing these opportunities can affect only a minority of motorcycle crashes and does not change the need for other motorcycle safety countermeasures such as helmets, universal helmet laws, and antilock braking systems.     

Comparison of Expected Crash and Injury Reduction from Production Forward Collision and Lane Departure Warning Systems

Objectives: The U.S. New Car Assessment Program (NCAP) now tests for forward collision warning (FCW) and lane departure warning (LDW). The design of these warnings differs greatly between vehicles and can result in different real-world field performance in preventing or mitigating the effects of collisions. The objective of this study was to compare the expected number of crashes and injured drivers that could be prevented if all vehicles in the fleet were equipped with the FCW and LDW systems tested under the U.S. NCAP.

Methods: To predict the potential crashes and serious injury that could be prevented, our approach was to computationally model the U.S. crash population. The models simulated all rear-end and single-vehicle road departure collisions that occurred in a nationally representative crash database (NASS-CDS). A sample of 478 single-vehicle crashes from NASS-CDS 2012 was the basis for 24,822 simulations for LDW. A sample of 1,042 rear-end collisions from NASS-CDS years 1997–2013 was the basis for 7,616 simulations for FCW. For each crash, 2 simulations were performed: (1) without the system present and (2) with the system present. Models of each production safety system were based on 54 model year 2010–2014 vehicles that were evaluated under the NCAP confirmation procedure for LDW and/or FCW. NCAP performed 40 LDW and 45 FCW tests of these vehicles.

Results: The design of the FCW systems had a dramatic impact on their potential to prevent crashes and injuries. Between 0 and 67% of crashes and 2 and 69% of moderately to fatally injured drivers in rear-end impacts could have been prevented if all vehicles were equipped with the FCW systems. Earlier warning times resulted in increased benefits. The largest effect on benefits, however, was the lower operating speed threshold of the systems. Systems that only operated at speeds above 20 mph were less than half as effective as those that operated above 5 mph with similar warning times. The production LDW systems could have prevented between 11 and 23% of drift-out-of-lane crashes and 13 and 22% of seriously to fatally injured drivers. A majority of the tested LDW systems delivered warnings near the point when the vehicle first touched the lane line, leading to similar benefits. Minimum operating speed also greatly affected LDW effectiveness.

Conclusions: The results of this study show that the expected field performance of FCW and LDW systems are highly dependent on the design and system limitations. Systems that delivered warnings earlier and operated at lower speeds may prevent far more crashes and injuries than systems that warn late and operate only at high speeds. These results suggest that future FCW and LDW evaluation should prioritize early warnings and full-speed range operation. A limitation of this study is that additional crash avoidance features that may also mitigate collisions—for example, brake assist, automated braking, or lane-keeping assistance—were not evaluated during the NCAP tests or in our benefits models. The potential additional mitigating effects of these systems were not quantified in this study.     

Characteristics of rear-end crashes involving passenger vehicles with automatic emergency braking

Abstract

Objectives: Automatic emergency braking (AEB) is a proven effective countermeasure for preventing front-to-rear crashes, but it has not yet fully lived up to its estimated potential. This study identified the types of rear-end crashes in which striking vehicles with AEB are overrepresented to determine whether the system is more effective in some situations than in others, so that additional opportunities for increasing AEB effectiveness might be explored.

Methods: Rear-end crash involvements were extracted from 23?U.S. states during 2009–2016 for striking passenger vehicles with and without AEB among models where the system was optional. Logistic regression was used to examine the odds that rear-end crashes with various characteristics involved a striking vehicle with AEB, controlling for driver and vehicle features.

Results: Striking vehicles were significantly more likely to have AEB in crashes where the striking vehicle was turning relative to when it was moving straight (odds ratio [OR]?=?2.35; 95% confidence interval [CI], 1.76, 3.13); when the struck vehicle was turning (OR = 1.66; 95% CI, 1.25, 2.21) or changing lanes (OR = 2.05; 95% CI, 1.13, 3.72) relative to when it was slowing or stopped; when the struck vehicle was not a passenger vehicle or was a special use vehicle relative to a car (OR = 1.61; 95% CI, 1.01, 2.55); on snowy or icy roads relative to dry roads (OR = 1.83; 95% CI, 1.16, 2.86); or on roads with speed limits of 70+ mph relative to those with 40 to 45?mph speed limits (OR = 1.49; 95% CI, 1.10, 2.03). Overall, 25.3% of crashes where the striking vehicle had AEB had at least one of these overrepresented characteristics, compared with 15.9% of strikes by vehicles without AEB.

Conclusions: The typical rear-end crash occurs when 2 passenger vehicles are proceeding in line, on a dry road, and at lower speeds. Because atypical crash circumstances are overrepresented among rear-end crashes by striking vehicles with AEB, it appears that the system is doing a better job of preventing the more typical crash scenario. Consumer information testing programs of AEB use a test configuration that models the typical rear-end crash type. Testing programs promoting good AEB performance in crash circumstances where vehicles with AEB are overrepresented could guide future development of AEB systems that perform well in these additional rear-end collision scenarios.     

Effects of lane departure warning on police-reported crash rates

ObjectiveTo evaluate the effects of lane departure warning (LDW) on single-vehicle, sideswipe, and head-on crashes.MethodPolice-reported data for the relevant crash types were obtained from 25 U.S. states for the years 2009–2015. Observed counts of crashes with fatalities, injuries, and of all severities for vehicles with LDW were compared with expected counts based on crash involvement rates for the same passenger vehicles without LDW, with exposure by vehicle series, model year, and lighting system standardized between groups. For relevant crashes of all severities and those with injuries, Poisson regression was used to estimate the benefits of LDW while also controlling for demographic variables; fatal crashes were too infrequent to be modeled.ResultsWithout accounting for driver demographics, vehicles with LDW had significantly lower involvement rates in crashes of all severities (18%), in those with injuries (24%), and in those with fatalities (86%). Adding controls for driver demographics in the Poisson regression reduced the estimated benefit of LDW only modestly in crashes of all severities (11%, p < 0.05) and in crashes with injuries (21%, p < 0.07).ConclusionsLane departure warning is preventing the crash types it is designed to address, even after controlling for driver demographics. Results suggest that thousands of lives each year could be saved if every passenger vehicle in the United States were equipped with a lane departure warning system that performed like the study systems.Practical applicationsPurchase of LDW should be encouraged, and, because drivers do not always keep the systems turned on, future efforts should focus on designing systems to encourage greater use and educating consumers about the benefits of using the systems.     

Rage against the machine? Google's self-driving cars versus human drivers

IntroductionAutomated driving represents both challenges and opportunities in highway safety. Google has been developing self-driving cars and testing them under employee supervision on public roads since 2009. These vehicles have been involved in several crashes, and it is of interest how this testing program compares to human drivers in terms of safety.MethodsGoogle car crashes were coded by type and severity based on narratives released by Google. Crash rates per million vehicle miles traveled (VMT) were computed for crashes deemed severe enough to be reportable to police. These were compared with police-reported crash rates for human drivers. Crash types also were compared.ResultsGoogle cars had a much lower rate of police-reportable crashes per million VMT than human drivers in Mountain View, Calif., during 2009–2015 (2.19 vs 6.06), but the difference was not statistically significant. The most common type of collision involving Google cars was when they got rear-ended by another (human-driven) vehicle. Google cars shared responsibility for only one crash.ConclusionsThese results suggest Google self-driving cars, while a test program, are safer than conventional human-driven passenger vehicles; however, currently there is insufficient information to fully examine the extent to which disengagements affected these results.Practical applicationResults suggest that highly-automated vehicles can perform more safely than human drivers in certain conditions, but will continue to be involved in crashes with conventionally-driven vehicles.     

Multi-agent traffic simulations to estimate the impact of automated technologies on safety

Abstract

Objective: The objective of this article was to develop a multi-agent traffic simulation methodology to estimate the potential road safety improvements of automated vehicle technologies.

Methods: We developed a computer program that merges road infrastructure data with a large number of vehicles, drivers, and pedestrians. Human errors are induced by modeling inattention, aimless driving, insufficient safety confirmation, misjudgment, and inadequate operation. The program was applied to simulate traffic in a prescribed area in Tsukuba city. First, a 100% manual driving scenario was set to simulate traffic for a total preset vehicle travel distance. The crashes from this simulation were compared with real-world crash data from the prescribed area from 2012 to 2017. Thereafter, 4 additional scenarios of increasing levels of automation penetration (including combinations of automated emergency braking [AEB], lane departure warning [LDW], and SAE Level 4 functions) were implemented to estimate their impact on safety.

Results: Under manual driving, the system simulated a total of 859 crashes including single-car lane departure, car-to-car, and car-to-pedestrian crashes. These crashes tended to occur in locations similar to real-world crashes. The number of crashes predicted decreased to 156 cases with increasing level of automation. All of the technologies considered contributed to the decrease in crashes. Crash reductions attributable to AEB and LDW in the simulations were comparable to those reported in recent field studies. For the highest levels of automation, no assessment data were available and hence the results should be carefully treated. Further, in modeling automated functions, potentially negative aspects such as sensing failure or human overreliance were not incorporated.

Conclusions: We developed a multi-agent traffic simulation methodology to estimate the effect of different automated vehicle technologies on safety. The crash locations resulting from simulations of manual driving within a limited area in Japan were preliminary assessed by comparison with real-world crash data collected in the same area. Increasing penetration levels of AEB and LDW led to a large reduction in both the frequency and severity of rear-end crashes, followed by car-to-car head-on crashes and single-vehicle lane departure crashes. Preliminary estimations of the potential safety improvements that may be achieved with highly automated driving technologies were also obtained.     

An examination of the increases in pedestrian motor-vehicle crash fatalities during 2009–2016

IntroductionPedestrian fatalities increased 46% in the United States during 2009–2016. This study identified circumstances under which the largest increases in deaths occurred during this period.MethodAnnual counts of U.S. pedestrian fatalities and crash involvements were extracted from the Fatality Analysis Reporting System and General Estimates System. Poisson regression examined if pedestrian fatalities by various roadway, environmental, personal, and vehicle factors changed significantly during 2009–2016. Linear regression examined changes over the study period in pedestrian deaths per 100 crash involvements and in horsepower per 1000 pounds of weight among passenger vehicles involved in fatal single-vehicle pedestrian crashesResultsPedestrian deaths per 100 crash involvements increased 29% from 2010, when they reached their lowest point, to 2015, the most recent year for which crash involvement data were available. The largest increases in pedestrian deaths during 2009–2016 occurred in urban areas (54% increase from 2009 to 2016), on arterials (67% increase), at nonintersections (50% increase), and in dark conditions (56% increase). The rise in the number of SUVs involved in fatal single-vehicle pedestrian crashes (82% increase) was larger than the increases in the number of cars, vans, pickups, or medium/heavy trucks involved in these crashes. The power of passenger vehicles involved in fatal single-vehicle pedestrian crashes increased over the study period, with larger increases in vehicle power among more powerful vehicles.ConclusionsEfforts to turn back the recent increase in pedestrian fatalities should focus on the conditions where the rise has been the greatest.Practical applicationsTransportation agencies can improve urban arterials by investing in proven countermeasures, such as road diets, median crossing islands, pedestrian hybrid beacons, and automated speed enforcement. Better road lighting and vehicle headlights could improve pedestrian visibility at night.     

Crash and injury prevention estimates for intersection driver assistance systems in left turn across path/opposite direction crashes in the United States

Abstract

Objective: The objective of this research study was to estimate the number of left turn across path/opposite direction (LTAP/OD) crashes and injuries that could be prevented in the United States if vehicles were equipped with an intersection advanced driver assistance system (I-ADAS).

Methods: This study reconstructed 501 vehicle-to-vehicle LTAP/OD crashes in the United States that were investigated in the NHTSA National Motor Vehicle Crash Causation Survey (NMVCCS). The performance of 30 different I-ADAS system variations was evaluated for each crash. These variations were the combinations of 5 time-to-collision (TTC) activation thresholds, 3 latency times, and 2 different response types (automated braking and driver warning). In addition, 2 sightline assumptions were modeled for each crash: One where the turning vehicle was visible long before the intersection and one where the turning vehicle was only visible within the intersection. For resimulated crashes that were not avoided by I-ADAS, a new crash delta-V was computed for each vehicle. The probability of Abbreviated Injury Scale 2 or higher injury in any body region (Maximum Abbreviated Injury Scale [MAIS] 2+F) to each front-row occupant was computed.

Results: Depending on the system design, sightline assumption, I-ADAS variation, and fleet penetration, an I-ADAS system that automatically applies emergency braking could avoid 18–84% of all LTAP/OD crashes. Only 0–32% of all LTAP/OD crashes could have been avoided using an I-ADAS system that only warns the driver. An I-ADAS system that applies emergency braking could prevent 47–93% of front-row occupants from receiving MAIS 2?+?F injuries. A system that warns the driver in LTAP/OD crashes was able to prevent 0–37% of front-row occupants from receiving MAIS 2?+?F injuries. The effectiveness of I-ADAS in reducing crashes and number of injured persons was higher when both vehicles were equipped with I-ADAS.

Conclusions: This study presents the simulated effectiveness of a hypothetical intersection active safety system on real crashes that occurred in the United States. This work shows that there is a strong potential to reduce crashes and injuries in the United States.     

Residual road departure crashes after full deployment of LDW and LDP systems

Abstract

Objective: Road departures are one of the most severe crash modes in the United States. To help reduce this risk, vehicles are being introduced in the United States with lane departure warning (LDW) systems, which warn the driver of a departure, and lane departure prevention (LDP) systems, which assist the driver in steering back to the roadway. Previous studies have estimated that LDW/LDP systems may prevent one third of drift-out-of-lane road departure crashes. This study investigates the crashes that were not prevented, to potentially set research priorities for next-generation road departure prevention systems.

Methods: The event data recorder (EDR) data from 128 road departure crashes in the National Automotive Sampling System Crashworthiness Data System (NASS-CDS) from 2011 to 2015 were mapped onto the vehicle trajectory and simulated with LDW/LDP to assess the potential for crash avoidance. The model predicted that 63–83% of single-vehicle road departure crashes may not be prevented by an LDW system and 49% may not be prevented by an LDP system.

Results and Conclusions: For LDP systems, which were assumed to have zero latency, no crashes were avoided if the time-to-collision (TTC) from lane crossing to impact was less than 0.55?s. Obstacles such as guardrails and traffic barriers, which tend to be very close to the road, were more common among the remaining crashes. The study shows that LDW/LDP systems are limited by two factors, driver reaction time and TTC to the roadside object. Thus, earlier driver response and longer TTC may help in these situations.     

The Real-World Safety Potential of Connected Vehicle Technology

Objective: This article estimates the safety potential of a current commercially available connected vehicle technology in real-world crashes.

Method: Data from the Centre for Automotive Safety Research's at-scene in-depth crash investigations in South Australia were used to simulate the circumstances of real-world crashes. A total of 89 crashes were selected for inclusion in the study. The crashes were selected as representative of the most prevalent crash types for injury or fatal crashes and had potential to be mitigated by connected vehicle technology. The trajectory, speeds, braking, and impact configuration of the selected in-depth cases were replicated in a software package and converted to a file format allowing “replay” of the scenario in real time as input to 2 Cohda Wireless MK2 onboard units. The Cohda Wireless onboard units are a mature connected vehicle technology that has been used in both the German simTD field trial and the U.S. Department of Transport's Safety Pilot project and have been tuned for low false alarm rates when used in the real world. The crash replay was achieved by replacing each of the onboard unit Global Positioning System (GPS) inputs with the simulated data of each of the involved vehicles. The time at which the Cohda Wireless threat detection software issued an elevated warning was used to calculate a new impact speed using 3 different reaction scenarios and 2 levels of braking.

Results: It was found that between 37 and 86% of the simulated crashes could be avoided, with highest percentage due a fully autonomous system braking at 0.7 g. The same system also reduced the impact speed relative to the actual crash in all cases. Even when a human reaction time of 1.2 s and moderate braking of 0.4 g was assumed, the impact speed was reduced in 78% of the crashes. Crash types that proved difficult for the threat detection engine were head-on crashes where the approach angle was low and right turn–opposite crashes.

Conclusions: These results indicate that connected vehicle technology can be greatly beneficial in real-world crash scenarios and that this benefit would be maximized by having the vehicle intervene autonomously with heavy braking. The crash types that proved difficult for the connected vehicle technology could be better addressed if controller area network (CAN) information is available, such as steering wheel angle, so that driver intent can be inferred sooner. More accurate positioning in the real world (e.g., combining satellite positioning and accelerometer data) would allow the technology to be more effective for near-collinear head-on and rear-end crashes, because the low approach angles that are common in such crashes are currently ignored in order to minimize false alarms due to positioning uncertainty.     

Analysis of Driver Evasive Maneuvering Prior to Intersection Crashes Using Event Data Recorders

Objective: Intersection crashes account for over 4,500 fatalities in the United States each year. Intersection Advanced Driver Assistance Systems (I-ADAS) are emerging vehicle-based active safety systems that have the potential to help drivers safely navigate across intersections and prevent intersection crashes and injuries. The performance of an I-ADAS is expected to be highly dependent upon driver evasive maneuvering prior to an intersection crash. Little has been published, however, on the detailed evasive kinematics followed by drivers prior to real-world intersection crashes. The objective of this study was to characterize the frequency, timing, and kinematics of driver evasive maneuvers prior to intersection crashes.

Methods: Event data recorders (EDRs) downloaded from vehicles involved in intersection crashes were investigated as part of NASS-CDS years 2001 to 2013. A total of 135 EDRs with precrash vehicle speed and braking application were downloaded to investigate evasive braking. A smaller subset of 59 EDRs that collected vehicle yaw rate was additionally analyzed to investigate evasive steering. Each vehicle was assigned to one of 3 precrash movement classifiers (traveling through the intersection, completely stopped, or rolling stop) based on the vehicle's calculated acceleration and observed velocity profile. To ensure that any significant steering input observed was an attempted evasive maneuver, the analysis excluded vehicles at intersections that were turning, driving on a curved road, or performing a lane change. Braking application at the last EDR-recorded time point was assumed to indicate evasive braking. A vehicle yaw rate greater than 4° per second was assumed to indicate an evasive steering maneuver.

Results: Drivers executed crash avoidance maneuvers in four-fifths of intersection crashes. A more detailed analysis of evasive braking frequency by precrash maneuver revealed that drivers performing complete or rolling stops (61.3%) braked less often than drivers traveling through the intersection without yielding (79.0%). After accounting for uncertainty in the timing of braking and steering data, the median evasive braking time was found to be between 0.5 to 1.5 s prior to impact, and the median initial evasive steering time was found to occur between 0.5 and 0.9 s prior to impact. The median average evasive braking deceleration for all cases was found to be 0.58 g. The median of the maximum evasive vehicle yaw rates was found to be 8.2° per second. Evasive steering direction was found to be most frequently in the direction of travel of the approaching vehicle.

Conclusions: The majority of drivers involved in intersection crashes were alert enough to perform an evasive action. Most drivers used a combination of steering and braking to avoid a crash. The average driver attempted to steer and brake at approximately the same time prior to the crash.     

Crash risk of ESC-fitted passenger cars

Objective: We examined both fatal and injury at-fault crashes of a population of passenger cars fitted with electronic stability control (ESC). Crash rates were calculated in relation to both registration years and mileage. Crash rates were also calculated for a non-ESC car population and crash rate ratios were calculated to compare the crash risk between ESC-fitted and non-ESC-fitted passenger cars.

Methods: Passenger car models with and without ESC were identified (ESC-equipped cars: 3,352,813 registration years; non-ESC-equipped: 5,839,946 registration years) and their vehicle information for the period 2009–2013, including mileage (ESC-equipped vehicles: 89.3 billion kilometers; non-ESC-equipped: 72.4 billion kilometers), was drawn from the national Vehicular and Driver Data Register.

The registry of Finnish road accident investigation teams was accessed and all fatal at-fault crashes among the cars in the study populations (ESC 97; non-ESC 377) for the period 2009–2013 were analyzed. The motor insurance database includes at-fault crashes leading to injuries and was utilized for analyses (ESC: N?=?8,827, non-ESC: N?=?21,437).

Crash rates and crash rate ratios were calculated to evaluate crash risk of both ESC-equipped and non-ESC-equipped passenger cars. Poisson regression was used to model crash involvement rate ratios both per registration year and per mileage for vehicles with ESC and without ESC, controlling for age and gender of the vehicle owner and vehicle mass.

Results: Passenger cars fitted with ESC showed lower crash rates than non-ESC-equipped cars in all crash types studied. In general, the difference in crash rates between ESC-equipped and non-ESC-equipped vehicles was greater when the crashes were compared to the mileage rather than registration years. The mileage-proportional crash rate of ESC-equipped cars was 64% (95% confidence interval, 61%; 67%) lower in run-off-road crashes resulting in injury and as much as 82% (65%; 91%) lower in fatal run-off-road crashes when suicides and disease attacks were not taken into account.

Conclusions: Our results show that modern passenger cars provide a significant crash risk reduction, which depends on both ESC and passive safety features introduced. Results also show that exposure evaluation in terms of registration years (or vehicle population) instead of true mileage can provide an overly pessimistic view of the crash risk.     

Effects of rearview cameras and rear parking sensors on police-reported backing crashes

Objective: The objective of this study was to examine the effectiveness of rearview cameras, rear parking sensors, and both systems combined in preventing police-reported backing crashes.

Methods: Negative binomial regression was used to compare rates of police-reported backing crash involvements per insured vehicle year in 22 U.S. states during 2009–2014 between passenger vehicle models with backing technologies and the same vehicle models where the optional systems were not purchased, controlling for other factors affecting crash risk. Rearview cameras were examined from four automakers, rear parking sensors from 2 automakers, and both systems combined from a single automaker.

Results: Rearview cameras reduced backing crash involvement rates by 17%. Reductions were larger for drivers 70 and older (36%) than for drivers younger than 70 (16%); however, estimates for older and younger drivers did not differ significantly from one another. The Buick Lucerne's rear parking sensor system reduced backing crash involvement rates significantly by 34%, but the reduction for Mercedes-Benz vehicles fit with a sensor system was small and not statistically significant. When averaged between the 2 automakers, effects were significantly larger for drivers 70 and older (38% reduction) than for drivers younger than 70 (1% increase); effects were significant for older but not younger drivers. Backing crash involvement rates were 13% lower among Mercedes-Benz vehicles with a rearview camera and parking sensors than among vehicles without, but this finding was not significant.

Discussion: Rearview cameras are effective in preventing police-reported backing crashes. Effects of rear parking sensors are less straightforward; it is unclear whether the Buick Lucerne system's benefits are due to the older age of its drivers, characteristics of the vehicle or system, or a combination. Systems may be especially beneficial to older drivers who might have limitations that make backing challenging. Although effect estimates did not differ significantly between older and younger drivers for both system types, the magnitude of the differences was large and the pattern of results was consistent across 6 of the 7 systems examined. When rear visibility systems become required equipment on new passenger vehicles in 2018, rearview cameras can be expected to prevent 1 in 6 backing crashes reported to police that involve equipped vehicles.     

The use of proactive risk management to reduce emergency service vehicle crashes among firefighters

IntroductionEmergency service vehicle crashes (ESVCs), including rollovers and collisions with other vehicles and fixed objects, are a leading cause of death among U.S. firefighters. Risk management (RM) is a proactive intervention to identifying and mitigating occupational risks and hazards. The goal of this study was to assess the effect of RM in reducing ESVCs. Methods: Three fire departments (A, B and C), representing urban and suburban geographies, and serving medium to large populations, participated in facilitated RM programs to reduce their ESVCs. Interventions were chosen by each department to address their department-specific circumstances and highest risks. Monthly crash rates per 10,000 calls were calculated for each department an average of 28 months before and 23 months after the start of the RM programs. Interrupted time series analysis was used to assess the effect of the RM programs on monthly crash rates. Poisson regression was used to estimate the number of crashes avoided. Economic data from Department A were analyzed to estimate cost savings. Results: Department A had a 15.4% (P = 0.30) reduction in the overall monthly crash rate immediately post-RM and a 1% (P = 0.18) decline per month thereafter. The estimated two-year average cost savings due to 167 crashes avoided was $253,100 (95%CI= $192,355 – $313,885). Department B had a 9.7% (P = 0.70) increase in the overall monthly crash rate immediately post-RM and showed no significant changes in their monthly crash rate. Department C had a 28.4% (P = 0.001) reduction in overall monthly crash rate immediately post-RM and a 1.2% (P = 0.09) increase per month thereafter, with an estimated 122 crashes avoided. Conclusions: RM programs have the potential to reduce ESVCs in the fire service and their associated costs; results may vary based on the interventions chosen and how they are implemented. Practical applications: Risk management may be an effective and broadly implemented intervention to reduce ESVCs in the US fire service.     

Motorcycle active safety systems: Assessment of the function and applicability using a population-based crash data set

Objective: Motorcycles and mopeds, often referred to as powered 2-wheelers (PTWs), play an important role in personal mobility worldwide. Despite their advantages, including low cost, space occupancy, and fuel efficiency, the risk of sustaining serious or fatal injuries is higher than that for occupants of passenger cars. The development of safety systems specific for PTWs represents a potential way to reduce casualties among riders. With the proliferation of new active and passive safety technologies, the question as to which might offer the most value is important. In this context, a prioritization process was applied to a set of PTW active safety systems to evaluate their applicability to crash scenarios alone and in combination. The systems included in the study were antilock braking (ABS), autonomous emergency braking (AEB), collision warning, curve warning, and curve assist.

Methods: With the functional performance of the 5 safety systems established, the relevance of each system to specific crash configurations and vehicle movements defined by a standardized accident classification system used in Victoria, Australia, was rated by 2 independent reviewers, with a third reviewer acting as a moderator where disagreements occurred. Ratings ranged from 1 (definitely not applicable) to 4 (definitely applicable). Using population-based crash data, the number and percentage of crashes that each safety system could potentially influence, or be relevant for, was defined. Applying accepted injury costs permitted the derivation of the societal economic cost of PTW crashes and the potential reductions associated with each safety system given a theoretical crash avoidance effectiveness of 100%.

Results: In the 12-year period 2000–2011, 23,955 PTW riders and 1292 pillion passengers were reported to have been involved in a road crash, with over 500 killed and more than 10,000 seriously injured; only 3.5% of riders/pillion passengers were uninjured. The total economic cost associated with these injured riders and pillion passengers was estimated to be AU$11.1 billion (US$7.70 billion; €6.67 billion). The 5 safety systems, as single solutions or in combination, were relevant to 57% of all crashes and to 74% of riders killed. Antilock braking was found to be relevant to the highest number of crashes, with incremental increases in coverage when combined with other safety systems.

Conclusions: The findings demonstrate that ABS, alone and in combination with other safety systems, has the potential to mitigate or possibly prevent a high percentage of PTW crashes in the considered setting. Other safety systems can influence different crash scenarios and are also recommended. Given the high cost of motorcycle crashes and the increasing number of PTW safety technologies, the proposed approach can be used to inform the process of selection of the most suitable interventions to improve PTW safety.     

Forward collision warning system impact

Abstract

Objective: The objective of this research is to use historical crash data to evaluate the potential benefits of both high- and low-speed automatic emergency braking (AEB) with forward collision warning (FCW) systems.

Methods: Crash data from the NHTSA’s NASS–General Estimates System (GES) and Fatality Analysis Reporting System (FARS) databases were categorized to classify crashes by the speed environment, as well as to identify cases where FCW systems would be applicable.

Results: Though only about 19% of reported crashes occur in environments with speeds greater than 45?mph, approximately 32% of all serious or fatal crashes occur in environments with speeds greater than 45?mph. The percentage of crashes where FCW systems would be relevant has remained remarkably constant, varying between about 21 and 26% from 2002 to 2015. In 2-vehicle fatal crashes where one rear-ends the other, the fatality rates are actually higher in the struck vehicle (33%) than the striking vehicle (26%). The disparity is even greater when considering size–class differences, such as when a light truck rear-ends a passenger car (15 vs. 42% fatality rates, respectively).

Conclusions: NHTSA and the Insurance Institute for Highway Safety (IIHS) proposed the Automatic Emergency Braking Initiative in 2015, which is intended to make AEB (also called crash-imminent braking) with FCW systems standard on nearly all new cars by September 2022. Twenty automakers representing 99% of the U.S. auto market voluntarily committed to the initiative. Though the commitment to safety is laudable, the AEB component of the agreement only covers low-speed AEB systems, with the test requirements set to 24?mph or optionally as low as 12?mph. The test requirements for the FCW component of the agreement include 2 tests that begin at 45?mph. Only 21% of relevant serious injury or fatal accidents occur in environments at speeds under 24?mph, whereas about 22% of serious or fatal crashes occur in environments with speeds greater than 45?mph. This means that the AEB with FCW systems as agreed upon will cover only 21% of serious or fatal crashes and will not cover 22% of serious or fatal crashes. Because these systems are protective not only for the occupants of the vehicle where they are installed but also other vehicles on the roads, the data indicate that these systems should be a standard feature on all cars for high-speed as well as low-speed environments for the greatest social benefit.     

Crash risk factors for interstate large trucks in North Carolina

Introduction: Provide an updated examination of risk factors for large truck involvements in crashes resulting in injury or death. Methods: A matched case–control study was conducted in North Carolina of large trucks operated by interstate carriers. Cases were defined as trucks involved in crashes resulting in fatal or non-fatal injury, and one control truck was matched on the basis of location, weekday, time of day, and truck type. The matched-pair odds ratio provided an estimate of the effect of various driver, vehicle, or carrier factors. Results: Out-of-service (OOS) brake violations tripled the risk of crashing; any OOS vehicle defect increased crash risk by 362%. Higher historical crash rates (fatal, injury, or all crashes) of the carrier were associated with increased risk of crashing. Operating on a short-haul exemption increased crash risk by 383%. Antilock braking systems reduced crash risk by 65%. All of these results were statistically significant at the 95% confidence level. Other safety technologies also showed estimated benefits, although not statistically significant. Conclusions: With the exception of the finding that short-haul exemption is associated with increased crash risk, results largely bolster what is currently known about large truck crash risk and reinforce current enforcement practices. Results also suggest vehicle safety technologies can be important in lowering crash risk. This means that as safety technology continues to penetrate the fleet, whether from voluntary usage or government mandates, reductions in large truck crashes may be achieved. Practical application: Results imply that increased enforcement and use of crash avoidance technologies can improve the large truck crash problem.