Water purification systems: a comparative analysis based on the occurrence of disinfection by-products

Trihalomethanes (THMs) are halogenated hydrocarbons, and are by-products of the chlorination of drinking water. Most THMs are formed in drinking water when chlorine reacts with naturally occurring organic substances such as decomposing plant and animal materials. Risks for certain types of cancer are now being correlated with the presence of disinfection by-products (DBPs). The present research uses gas chromatography to analyze the presence and levels of THMs in drinking water samples from a variety of sources. These include (1) municipal drinking water from two south Florida counties; (2) two brands of bottled water; (3) untreated residential well water; and (4) municipal tap water passed through additional water purification systems. The results are summarized in a tabular format, and the compliance of each water with existing US EPA-mandated standards is examined. General conclusions from this study are that all the waters tested complied with federal regulations regarding THM levels, properly functioning home filtration units may be quite effective in further reducing DBP concentrations and, as expected, non-chlorinated waters such as bottled water and residential well water contain lower THM levels.     

Size and XAD fractionations of trihalomethane precursors from soils

Soil organic matter is an important source of allochthonous dissolved organic matter inputs to the Sacramento-San Joaquin Delta waterways, which is a drinking water source for 22 million people in California, USA. Knowledge of trihalomethane (THM) formation potential of soil-derived organic carbon is important for developing effective strategies for organic carbon removal in drinking water treatment. In this study, soil organic carbon was extracted with electrolytes (deionized H2O and Na- or Ca-based electrolytes) of electrical conductivity bracketing those found in Delta leaching and runoff conditions. The extracts were physically and chemically separated into different fractions: colloidal organic carbon (0.45-0.1 microm), fine colloidal organic carbon (0.1-0.025 microm), and dissolved organic carbon (DOC) (<0.025 microm); hydrophobic acid (HPOA), transphilic acid, and hydrophilic acid. Two representative Delta soils, Rindge Muck (a peat soil) and Scribner Clay Loam (a mineral soil) were examined. Results showed that less than 2% of soil organic carbon was electrolyte-extractable and heterogeneous organic fractions with distinct THM reactivity existed. Regardless of soil and electrolytes, DOC and HPOA fractions were dominant in terms of total concentration and THMFP. The amounts of extractable organic carbon and THMFP were dependent on the cation and to a lesser extent on electrical conductivity of electrolytes. Along with our previous study on temperature and moisture effects on DOC production, we propose a conceptual model to describe the impacts of agricultural practices on DOC production in the Delta. DOC is mainly produced in the surface peat soils during the summer and is immobilized by accumulated salt in the soils. DOC is leached from soils to drainage ditches and finally to the Delta channels during winter salt leaching practices.     

Fate of disinfection by-products in groundwater during aquifer storage and recovery with reclaimed water

Knowledge on the behaviour of disinfection by-products (DBPs) during aquifer storage and recovery (ASR) is limited even though this can be an important consideration where recovered waters are used for potable purposes. A reclaimed water ASR trial in an anoxic aquifer in South Australia has provided some of the first quantitative information at field-scale on the fate and transport of trihalomethanes (THMs) and haloacetic acids (HAAs). The results revealed that THM half-lives varied from <1 to 65 days, with persistence of chloroform being highest and bromoform lowest. HAA attenuation was rapid (<1 day). Rates of THM attenuation were shown to be highly dependent on the geochemical environment as evidenced by the 2-5 fold reduction in half-lives at the ASR well which became methanogenic during the storage phase of the trial, as compared to an observation well situated 4 m away, which remained nitrate-reducing. These findings agree with previous laboratory-based studies which also show persistence declining with increased bromination of THMs and reducing redox conditions. Modelling suggests that the chlorinated injectant has sufficient residual chlorine and natural organic matter for substantial increases in THMs to occur within the aquifer, however this is masked in some of the field observations due to concurrent attenuation, particularly for the more rapidly attenuated brominated compounds. The model is based on data taken from water distribution systems and may not be representative for ASR since bromide and ammonia concentrations in the injected water and the possible role of organic carbon in the aquifer were not taken into consideration. During the storage phase DBP formation potentials were reduced as a result of the removal of precursor material despite an increase in the THM formation potential per unit weight of total organic carbon. This suggests that water quality improvements with respect to THMs and HAAs can be achieved through ASR in anoxic aquifers.     

Disinfection by-products in Finnish drinking waters

Disinfection by-products (DBPs) were measured in plant effluents of 35 Finnish waterworks, which utilized different treatment processes and raw water sources. DBPs were measured also from the distribution systems of three waterworks. Di- and trichloroacetic acids, and chloroform were the major DBPs found in treated water samples. The concentration of six haloacetic acids (HAA6) exceeded the concentrations of trihalomethanes (THMs). Chlorinated drinking waters (DWs) originating from surface waters contained the highest concentration of HAA6 and THMs: 108 and 26 microg/l, respectively. The lowest concentrations of DBPs were measured from ozonated and/or activated carbon filtrated and chloraminated DWs. Higher concentrations of HAA6, THMs, and adsorbable organic halogens were measured in summer compared to winter. The levels of chlorinated acetic acids, chloroform, and bromodichloromethane correlated positively with mutagenicity. Past mutagenicity levels of DWs were examined. A major reduction in the use of prechlorination, increased use of chloramine disinfection, and better removal of organic carbon were the most important reasons for the 69% decrease in mutagenicity from 1985 to 1994.     

Fate of disinfection by-products in groundwater during aquifer storage and recovery with reclaimed water

Knowledge on the behaviour of disinfection by-products (DBPs) during aquifer storage and recovery (ASR) is limited even though this can be an important consideration where recovered waters are used for potable purposes. A reclaimed water ASR trial in an anoxic aquifer in South Australia has provided some of the first quantitative information at field-scale on the fate and transport of trihalomethanes (THMs) and haloacetic acids (HAAs). The results revealed that THM half-lives varied from <1 to 65 days, with persistence of chloroform being highest and bromoform lowest. HAA attenuation was rapid (<1 day). Rates of THM attenuation were shown to be highly dependent on the geochemical environment as evidenced by the 2-5 fold reduction in half-lives at the ASR well which became methanogenic during the storage phase of the trial, as compared to an observation well situated 4 m away, which remained nitrate-reducing. These findings agree with previous laboratory-based studies which also show persistence declining with increased bromination of THMs and reducing redox conditions. Modelling suggests that the chlorinated injectant has sufficient residual chlorine and natural organic matter for substantial increases in THMs to occur within the aquifer, however this is masked in some of the field observations due to concurrent attenuation, particularly for the more rapidly attenuated brominated compounds. The model is based on data taken from water distribution systems and may not be representative for ASR since bromide and ammonia concentrations in the injected water and the possible role of organic carbon in the aquifer were not taken into consideration. During the storage phase DBP formation potentials were reduced as a result of the removal of precursor material despite an increase in the THM formation potential per unit weight of total organic carbon. This suggests that water quality improvements with respect to THMs and HAAs can be achieved through ASR in anoxic aquifers.     

Multiple regression models: a methodology for evaluating trihalomethane concentrations in drinking water from raw water characteristics

The presence of trihalomethanes (THMs) in drinking water has attracted the attention of both researchers and professionals, because of the harmful effects of these substances on human health. A multiple regression model was developed to estimate THM concentrations in finished drinking water, using data from the Menidi Treatment Plant of Athens. A number of routinely measured characteristics--including chlorine dose, chlorophyll a, temperature, pH and bromide--of raw water, were used to generate a reliable methodology for predicting both total THM and individual species concentrations. Seasonality effects were also considered during the analysis. In general, these models were found to give acceptable fits, estimating accurately lows and highs over the annual cycle.     

Occurrence of THMs and HAAs in experimental chlorinated waters of the Quebec City area (Canada)

Haloacetic acids (HAAs) and trihalomethanes (THMs) were generated in bench-scale chlorination experiments using treated waters (prior to final chlorination) of the three major drinking water utilities of the Quebec City area. The purpose was to investigate the formation and occurrence of these chlorination by-products (CBPs) on a seasonal basis. Data for HAAs, THMs and other physico-chemical parameters were produced through a six-month sampling program with variable conditions of water quality, water temperature, applied chlorine dose and reaction time. In waters from the three utilities, chloroform (THM specie), dichloroacetic and trichloroacetic acid (HAA species) were the most prevalent compounds due to the low concentrations of bromide in the utilities' raw waters. Significant differences in CBP occurrence were noted between the three utilities' chlorinated waters, mainly due to the type of disinfectant applied to raw water. The use of pre-ozonation, as opposed to pre-chlorination (or direct chlorination) in one of the utilities appears to be the major factor contributing to that utility's potential for compliance with current THM and future HAA standards. Seasonal variations in THMs and HAAs were mainly associated with variations in organic precursors and to changes in water temperature (two parameters which vary widely on a seasonal basis in surface waters of southern Quebec), with CBP occurrence at its highest in spring. Statistical correlations between HAAs and THMs were moderate and only temperature appeared to affect the preponderance of one CBP or the other. Finally, a regression analysis was carried out aimed at associating each CBP to water quality and the experimental parameters. Thanks to their predictive ability, multivariate models seem to be the tools with the best potential for decision-making purposes.     

Transformation of effluent organic matter during subsurface wetland treatment in the Sonoran Desert

The fate of dissolved organic matter (DOM) during subsurface wetland treatment of wastewater effluent in a hot, semi-arid environment was examined. The study objectives were to (1) discern changes in the character of dissolved organics as consequence of wetland treatment (2) establish the nature of wetland-derived organic matter, and (3) investigate the impact of wetland treatment on the formation potential of trihalomethanes (THMs). Subsurface wetland treatment produced little change in DOM polarity (hydrophobic-hydrophilic) distribution. Biodegradation of labile effluent organic matter (EfOM) and internal loading of wetland-derived natural organic matter (NOM) together produced only minor changes in the distribution of carbon moieties in hydrophobic acid (HPO-A) and transphilic acid (TPI-A) isolates of wetland effluent. Aliphatic carbon decreased as a percentage of total carbon during wetland treatment. The ratio of atomic C:N in wetland-derived NOM suggests that its character is determined by microbial activity. Formation of THMs upon chlorination of HPO-A and TPI-A isolates increased as a consequence of wetland treatment. Wetland-derived NOM was more reactive in forming THMs and less biodegradable than EfOM. For both HPO-A and TPI-A fractions, relationships between biodegradability and THM formation potential were similar among EfOM and NOM isolates; the less biodegradable isolates exhibited greater THM formation potential.     

Trihalomethane formation during water disinfection in four water supplies in the Somes river basin in Romania

Background, aim and scope  

After the discovery of chloroform in drinking water, an extensive amount of work has been dedicated to the factors influencing the formation of halogenated disinfections by-products (DBPs). The disinfection practice can vary significantly from one country to another. Whereas no disinfectant is added to many water supplies in Switzerland or no disinfectant residual is maintained in the distribution system, high disinfectant doses are applied together with high residual concentrations in the distribution system in other countries such as the USA or some southern European countries and Romania. In the present study, several treatment plants in the Somes river basin in Romania were investigated with regard to chlorine practice and DBP formation (trihalomethanes (THMs)). Laboratory kinetic studies were also performed to investigate whether there is a relationship between raw water dissolved organic matter, residual chlorine, water temperature and THM formation.     

Factors influencing formation of trihalomethanes in drinking water with special reference to Swedish conditions

The trihalomethane (THM) concentrations in drinking water are greatly affected by the disinfection methods as well as the organic content of the water. The THM formation was shown to increase considerable during 24 hours. This indicates a higher concentration of THM at the consumers' tap compared to the levels in the outgoing water from the water work. The dosage ratio between chlorine and ammonium sulphate can be used to regulate the THM concentrations. Disinfection with a relatively high dosage of chlorine dramatically increase the THM level while the equal amount of chlorine dioxide produces trace concentrations of THM only. The relatively low THM concentrations in Swedish drinking water as compared to levels found in water from for example the USA may probably depend on the low chlorine dosage practiced in Sweden.     

Influence of trophic status on PCB distribution in lake sediments and biota

We investigated the relationship between trophic status and polychlorinated biphenyl (PCB) distribution in 19 Swedish lakes. We analyzed PCB in water, phytoplankton, zooplankton, fish and sediment during two sampling periods, in spring and summer. The mass of sigma PCB in the lake sediments was positively related to lake trophy, i.e. more PCBs were accumulated and buried in the sediment of eutrophic lakes than in oligotrophic lakes. In the oligotrophic lakes a greater fraction of the total PCB load was dissolved in water. We conclude that this is a result of higher sedimentation rates in eutrophic lakes and relatively lower turnover of organic carbon in the water column of the shallow, eutrophic lakes. In the stratified lakes, the amount of PCB per cubic meter in the epilimnion decreased from spring to summer. We suggest that sedimentation of plankton beneath the thermocline during stratification act as a sink process of PCBs from the epilimnion.     

Trihalomethane formation during water disinfection in four water supplies in the Somes river basin in Romania

Background, aim and scope

After the discovery of chloroform in drinking water, an extensive amount of work has been dedicated to the factors influencing the formation of halogenated disinfections by-products (DBPs). The disinfection practice can vary significantly from one country to another. Whereas no disinfectant is added to many water supplies in Switzerland or no disinfectant residual is maintained in the distribution system, high disinfectant doses are applied together with high residual concentrations in the distribution system in other countries such as the USA or some southern European countries and Romania. In the present study, several treatment plants in the Somes river basin in Romania were investigated with regard to chlorine practice and DBP formation (trihalomethanes (THMs)). Laboratory kinetic studies were also performed to investigate whether there is a relationship between raw water dissolved organic matter, residual chlorine, water temperature and THM formation.

Materials and methods

Drinking water samples were collected from different sampling points in the water treatment plant (WTP) from Gilau and the corresponding distribution system in Cluj-Napoca and also from Beclean, Dej and Jibou WTPs. The water samples were collected once a month from July 2006 to November 2007 and stored in 40-mL vials closed with Teflon lined screw caps. Water samples were preserved at 4°C until analysis after sodium thiosulfate (Na₂S₂O₃) had been added to quench residual chlorine. All samples were analysed for THMs using headspace GC-ECD between 1 and 7 days after sampling. The sample (10 mL) was filled into 20-mL headspace vials and closed with a Teflon-lined screw cap. Thereafter, the samples were equilibrated in an oven at 60°C for 45 min. The headspace (1 mL) was then injected into the GC (Cyanopropylphenyl Polysiloxane column, 30 m × 53 mm, 3 μm film thickness, Thermo Finnigan, USA). The MDLs for THMs were determined from the standard deviation of eight standards at 1 μg/L. The MDLs for CHCl₃, CHBrCl₂, CHBr₂Cl and CHBr₃ were 0.3, 0.2, 0.3 and 0.6 μg/L, respectively. All kinetic laboratory studies were carried out only with water from the WTP Gilau. The experiments were conducted under two conditions: baseline conditions (pH 7, 21°C, 2.5 mg/L Cl₂) to gain information about the change of the organic matter in the raw water and seasonally variable conditions to simulate the actual process at the treatment plant and the distribution system.

Results and discussion

This study shows that the current chlorination practice in the investigated plants complies with the THM drinking water standards of the EU. The THM concentrations in all samples taken in the four treatment plants and distributions systems were below the EU drinking water standard for TTHMs of 100 μg/L. Due to the low bromide levels in the raw waters, the main THM formed in the investigated plants is chloroform. It could also be seen that the THM levels were typically lower in water supplies with groundwater as their water resource. In one plant (Dej) with a pre-ozonation step, a significantly lower (50%) THM formation during post-chlorination was observed. Laboratory chlorination experiments revealed a good correlation between chloroform formation and the consumed chlorine dose. Also, these experiments allowed a semi-quantative prediction of the chloroform formation in the distribution system of Cluj-Napoca.

Conclusions

CHCl₃ was the most important trihalomethane species observed after the chlorination of water in all of the sampled months. However, TTHM concentrations did not exceed the maximum permissible value of 100 μg/L (EU). The THM formation rates in the distribution system of Cluj-Napoca have a high seasonal variability. Kinetic laboratory experiments could be used to predict chloroform formation in the Cluj-Napoca distribution system. Furthermore, an empirical model allowed an estimation of the chloroform formation in the Gilau water treatment plant.

     

Modeling and optimization of trihalomethanes formation potential of surface water (a drinking water source) using Box–Behnken design

Purpose  

The present research aims to investigate the individual and interactive effects of chlorine dose/dissolved organic carbon ratio, pH, temperature, bromide concentration, and reaction time on trihalomethanes (THMs) formation in surface water (a drinking water source) during disinfection by chlorination in a prototype laboratory-scale simulation and to develop a model for the prediction and optimization of THMs levels in chlorinated water for their effective control.     

Formation of nitrogenous disinfection by-products from pre-chloramination

A sampling survey investigated the formation of nitrogenous disinfection by-products (N-DBPs) and carbonaceous DBPs (C-DBPs) from pre-chloramination, an increasingly common treatment strategy in China for regulated C-DBP control, followed by subsequent conventional water treatment processes, i.e., coagulation, sedimentation, and filtration. Dihalogenated N-DBPs typically peaked in the summer and early autumn with a relatively higher temperature, with the maximum levels of dichloroacetamide (DCAcAm), dichloroacetonitrile (DCAN), bromochloroacetonitrile, dibromoacetonitrile and dichloroacetone at 1.8, 6.3, 6.0, 2.6 and 1.8 μg L⁻¹ in the finished water, respectively. Also, the levels of all the dichlorinated N-DBPs were correlated with the ratio of dissolved organic nitrogen (DON) to dissolved organic carbon, implying autochthonous DON played an essential role in the formation of these DBPs. In contrast, the yields of trihalogenated DBPs [chloroform (CF), trichloronitromethane (TCNM) and trichloroacetone (TCAce)] appeared not to be significantly affected by seasons. CF and DCAN were the dominant species in trihalomethanes (THMs) and dihaloacetonitriles (DHANs), respectively. Bromine was more readily incorporated into DHANs to form brominated DBPs than THMs during pre-chloramination. Although pre-chloramination can ensure the finished water to meet with the current Chinese THM regulatory limits, the increased levels of TCNM and TCAce may be a new water quality concern.     

Comparison of methods for determination of volatile organic compounds in drinking water

Comparison of four methods including liquid-liquid extraction (LLE), direct aqueous injection (DAI), purge and trap (PAT) and head space (HS) were carried out in this work for determination of volatile organic compounds (VOCs) including trihalomethanes (THMs) in drinking water. This comparison is made especially to show the advantages and disadvantages and specifically the different detection limits (DL) that can be obtained for a given type of analysis. LLE is applicable only for determination of the THMs concentrations, while DAI, PAT, HS methods with different DL each of them are applicable for all VOCs, with PAT to be the most sensitive. Sampling apparatus and procedure for all these methods except of PAT are very simple and easy, but possible disadvantages for LLE and DAI are the low sensitivity and especially the detection only of THMs with LLE.     

The fate of chlorine and organic materials in swimming pools

The fate of organic nitrogen and carbon introduced into a swimming pool by pool users has been studied using a 2.2 m(3) model pool. The study made use of a body fluid analogue (BFA), containing the primary endogenous organic amino compounds, and a soiling analogue represented by humic acid (HA). The system was used to examine the effect of organic loading and organic carbon (OC) sources (i.e. amino or HA) on the levels and speciation of the key chlorinated disinfection by-products of trihalomethanes (THMs) and chloramines under operating conditions representative of those employed on a full-scale pool.Results revealed OC, chloramines and THMs to all attain steady-state levels after 200-500 h of operation, reflecting mineralisation of the dosed OC. Steady-state levels of OC were roughly linearly dependent on dose rate over the range of operational conditions investigated and, as with the chloramine levels recorded, were in reasonable agreement with those reported for full-scale pools. THM levels recorded were somewhat lower than those found in real pools, and were dependent on both on pH carbon source: the THM formation propensity for the soling analogue was around eight times than of the BFA. Of the assayed by-products, only nitrate was found to accumulate, accounting for 4-28% of the dosed amino nitrogen. Contrary to previous postulations based on the application of Henry's Law, only insignificant amounts of the volatile by-products were found to be lost to the atmosphere.     

Development of a model for predicting trihalomethanes propagation in water distribution systems

The rate of Trihalomethanes (THM) formation was experimentally observed to be first-order with respect to chlorine, and first-order with respect to humic acid precursors, and the overall reaction order was second-order. THM formation rate expression was formulated as a function of the concentration of THM Formation Potential (THMFP), residual chlorine concentration, reaction time and reaction temperature. A model is developed to estimate THM in water distribution systems. Since the calculated results are close to the measured values in the distribution system, it is suggested that this model is applicable to actual water distribution systems.     

Distribution and sources of polycyclic aromatic hydrocarbons in the middle and lower reaches of the Yellow River, China

In this study, concentrations, distribution between different phases, transition along the Middle and Lower reaches of the Yellow River and possible sources of PAHs were assessed. Results demonstrated that the relative proportions of 15 PAHs in all stations of the main River were similar, with concentrations of benzo[a]pyrene all above drinking water standards in most of the stations sampled. PAHs concentrations in tributaries were higher than those in the corresponding sites in the main River. PAHs concentrations of suspended particles were mainly correlated with contents of total organic carbon. However, PAHs concentrations in sediments were mainly correlated to the volume of particles with size smaller than 0.01 mm. The distribution of PAHs in all media sampled indicated that sediments could act as a sink/source for PAHs in different sections and source analysis revealed that PAHs mainly originated from coal burning, although in some tributaries PAH inputs could come from combustion of petroleum.     

Formation of Disinfection Byproducts (DBPs) in Surface Water Sources: Differential Ultraviolet (UV) Absorbance Approach

Chlorination for drinking water forms various disinfection byproducts (DBPs) of trihalomethanes (THMs) and haloacetic acids (HAAs). Chlorination has been attributed to the destruction of activated aromatic sites of the natural organic matter (NOM) predominantly at electron rich sites. Experiments with Istanbul surface waters showed that the magnitude of the decrease in the ultraviolet (UV) absorbance at 272 nm (UV₂₇₂) was an excellent indicator of destruction of these sites by chlorine. The main objective of the present study is to develop the differential UV₂₇₂ absorbance (ΔUV₂₇₂) related models for the prediction of the formation of THM, HAA, and their species in raw water samples from Terkos, Buyukcekmece, and Omerli lakes under different chlorination conditions. Significant factors affecting DBP formation in the raw waters were identified through numerical and graphical techniques. The R² values of the models varied between 0.94 and 0.97, indicating excellent predictive ability for THM₄ and HAA₉ in the raw waters. The models were validated using additional data. The results of this study concluded that addition of ΔUV₂₇₂ parameter into THM₄ and HAA₉ models make the prediction of these DBP compounds more precisely than those of DBP models developed in the past. A better understanding of these modeling systems will help the water treatment plant operators to minimize the DBP formation, providing a healthier and better drinking water quality as well as identifying strategies to improve water treatment and disinfection processes.     

Leeches as indicators of dietary mercury exposure in non-piscivorous waterfowl in central Ontario, Canada

We collected and analysed 113 leeches (Hirudinea) from 17 small lakes in the acid-stressed Muskoka region of central Ontario, Canada to examine the relationship between lake chemistry and mercury (Hg) concentrations in leeches, and thus determine whether leeches and other benthic invertebrates posed a dietary risk of Hg exposure for non-piscivorous waterfowl. Hg concentrations in leeches were generally low and only a few-fold above the detection limit (0.78 ng g(-1) wet weight (ww)). Mean Hg concentration in the bloodsucker Macrobdella decora was 6.94 +/- 0.78 SE ng g(-1) ww (n=49) and was 5.98 +/- 0.46 ng g(-1) ww (n=64) in the scavenger Percymoorensis marmoratis. Leech Hg concentrations were correlated with calcium and dissolved organic carbon concentrations in the water, respectively. These data suggest that leeches are not suitable monitors of Hg (usually as methylmercury) biomagnification in central Ontario lakes, and do not pose a dietary risk to non-piscivorous waterfowl.