Carbon footprint of food - approaches from national input-output statistics and a LCA of a food portion

The aim of the study, on which this paper is based, was to provide guidance to consumers to make environmentally responsible choices in their food consumption, to assist food supply chain stakeholders to identify the key areas for environmental improvements, and to provide policy makers with a tool for monitoring the potential impacts on climate change resulting from developments within the food sector. At the macro level, the EIO-LCA model was developed specifically for the Finnish food chain; at the micro level, LCAs were performed on 30 lunch portions. The contribution of the Finnish food chain to climate change was 14%, which comprised 40% CO₂ emissions, 25% CH₄ emissions, and 34% N₂O emissions. The share of impacts from domestic agricultural processes was the highest, at 69%. The impact of a single lunch portion ranged between 0.65 and 3.80 kg of equivalent CO₂. According to the EIO-LCA model, the average impact was 7.7 kg CO₂ eq/person daily. The consumer phase accounted for between 8 and 47% of the climate change impacts for homemade portions. In ready-to-eat portions industry and retail phases were emphasized, representing 25-38% of climate change impacts. We present an approach to steer the Finnish food sector onto an environmentally sustainable path; practical tools for consumers and farmers will especially need to be developed further.     

Disinfection by-products in Finnish drinking waters

Disinfection by-products (DBPs) were measured in plant effluents of 35 Finnish waterworks, which utilized different treatment processes and raw water sources. DBPs were measured also from the distribution systems of three waterworks. Di- and trichloroacetic acids, and chloroform were the major DBPs found in treated water samples. The concentration of six haloacetic acids (HAA6) exceeded the concentrations of trihalomethanes (THMs). Chlorinated drinking waters (DWs) originating from surface waters contained the highest concentration of HAA6 and THMs: 108 and 26 microg/l, respectively. The lowest concentrations of DBPs were measured from ozonated and/or activated carbon filtrated and chloraminated DWs. Higher concentrations of HAA6, THMs, and adsorbable organic halogens were measured in summer compared to winter. The levels of chlorinated acetic acids, chloroform, and bromodichloromethane correlated positively with mutagenicity. Past mutagenicity levels of DWs were examined. A major reduction in the use of prechlorination, increased use of chloramine disinfection, and better removal of organic carbon were the most important reasons for the 69% decrease in mutagenicity from 1985 to 1994.     

Bromide affecting drinking water mutagenicity

The effect of bromide on the mutagenicity of artificially recharged groundwater and purified artificially recharged groundwater after chlorine, ozone, hydrogen peroxide, permanganate, and UV treatments alone and in various combinations was studied. The highest mutagenicity was observed after chlorination, while hydrogen peroxide-ozone-chlorine treatment produced the lowest value for both waters. Chlorinated waters, which were spiked with bromide, had up to 3.7 times more mutagenic activity than waters without bromide after every preoxidation method. 3-Chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) was found to correspond as much as 76% of the overall mutagenicity in the waters not spiked with bromide. MX formation was found to be lower when the treated water contained bromide, implicating the formation of brominated MX analogues. Trihalomethane formation increased when the treated water contained bromide.     

Elevated atmospheric ozone increases concentration of insecticidal Bacillus thuringiensis (Bt) Cry1Ac protein in Bt Brassica napus and reduces feeding of a Bt target herbivore on the non-transgenic parent

Sustained cultivation of Bacillus thuringiensis (Bt) transgenic crops requires stable transgene expression under variable abiotic conditions. We studied the interactions of Bt toxin production and chronic ozone exposure in Bt cry1Ac-transgenic oilseed rape and found that the insect resistance trait is robust under ozone elevations. Bt Cry1Ac concentrations were higher in the leaves of Bt oilseed rape grown under elevated ozone compared to control treatment, measured either per leaf fresh weight or per total soluble protein of leaves. The mean relative growth rate of a Bt target herbivore, Plutella xylostella L. larvae was negative on Bt plants in all ozone treatments. On the non-transgenic plants, larval feeding damage was reduced under elevated ozone. Our results indicate the need for monitoring fluctuations in Bt toxin concentrations to reveal the potential of ozone exposure for altering dosing of Bt proteins to target and non-target herbivores in field environments experiencing increasing ozone pollution.     

An assessment of greenhouse gas emissions and material flows caused by the Finnish economy using the ENVIMAT model

An environmentally extended input-output (EE-IO) analysis - environmental impacts of material flows caused by the Finnish economy - was carried out in order to improve data on production and consumption in Finland. The study resulted in the ENVIMAT model, which can be used to analyze the relationship between material flows, environmental impacts and the economy. The model is based on monetary and physical input-output tables and an environmental life-cycle impact assessment. This article summarizes the main methodological aspects and findings regarding the material flows and climate impacts caused by the Finnish economy in 2002 and 2005. The Finnish model has relatively detailed input data with 150 industries and 918 products and the data on imports was assessed according to a mixed approach with the help of life-cycle inventory data. The results of the model showed that the Finnish economy uses imported material resources as much as domestic resources. Life-cycle greenhouse gas (GHG) emissions caused by imports were equivalent to 70-80% of domestic emissions. The GHG emissions embodied in imports (emissions abroad) and exports (emissions within Finland) were of the same magnitude. The analysis showed that the service sector accounted for 44% of GHG emissions caused by the domestic final use of products. Analysis of the results also showed that the indicator of total material requirement (TMR) should not be used for environmental impact comparisons of products and services. In the future, the aim is to use the ENVIMAT model for assessing temporal changes in the economy; for monitoring sustainable development; for planning climate change mitigation; and for identifying important factors in the economy and assessing their impacts.     

Host location behavior of Cotesia plutellae Kurdjumov (Hymenoptera: Braconidae) in ambient and moderately elevated ozone in field conditions

In field O₃-enrichment experiments increased herbivore densities have been reported, which could be due to negatively affected host location behavior of natural enemies. We addressed the impact of doubling background O₃ on the host location of the parasitoid Cotesia plutellae by conducting 24-h trials in an open-air O₃-fumigation system during two consecutive years. Two circles (radii 1.40 and 4.00 m) of Plutella xylostella-infested potted cabbage plants were placed in the O₃ and ambient plots. Female wasps were released into each plot from the center, and observed 5 times over a 24-h period to assess their host location capability. Thereafter, plants were kept in laboratory conditions until larvae pupation to determine parasitism rates. No significant differences were detected between ambient and O₃-enriched environments either in the number of wasps found in the field, or in the percentages of parasitized larvae. This suggests that moderately elevated O₃ will not affect the behavior of this parasitoid.     

Molecular size distribution of natural organic matter in raw and drinking waters.

The purpose of this study was to compare the molecular size distribution (MSD) of natural organic matter (NOM) in raw waters (RW) and drinking waters (DW), and to find out the differences between MSD after different water treatment processes. The MSD of NOM of 34 RW and DW of Finnish waterworks were determined with high-performance size-exclusion chromatography (HPSEC). Six distinct fractions were generally separated from water samples with the TSK G3000SW column, using sodium acetate at pH 7 as an eluent. Large and intermediate humic fractions were the most dominant fractions in surface waters (lakes and rivers), while in artificially recharged groundwaters and natural groundwaters intermediate and small fractions predominated. Water treatment processes removed the two largest fractions almost completely shifting the MSD towards smaller molecular size in DW. Granular activated carbon (GAC) filtration, ozonation, and their combination reduced all humic fractions compared to the conventional treatment. Humic fractions correlated with total organic carbon (TOC) content and chemical oxygen demand, this being especially true in RW. The results demonstrate that the HPSEC method can be applied for a qualitative and also for rough estimate quantitative analyzes of NOM directly from RW and DW samples without sample pretreatment.     

A new potential toxaphene congener: synthesis, GC/EI-MS study, crystal structure, NMR analysis, and ab initio calculations of 3-endo,5-endo-dichloro-7,7-bis-chloromethyl-4-dichloromethyl-tricyclo[2.2.1.0(2,6)]heptane

A new potential toxaphene congener 3-endo,5-endo-dichloro-7,7-bis-chloromethyl-4-dichloromethyl-tricyclo[2.2.1.0(2,6)]heptane 2 has been isolated from reaction mixture obtained by the chlorination of 2-exo, 10,10-trichlorobornane 1. The X-ray structural analysis of 2 revealed an unusual tricyclic structure, where the two chlorine atoms occupying endo-positions are in close spatial proximity with each other and near to the neighbouring CHCl2 group. Further, it revealed that the symmetry of the molecule is distorted. The 1H and 13C NMR spectra of 2 have been assigned by means of 1H, 1H double-quantum filtered correlation spectroscopy (DQF COSY), PFG 1H, 13C HMQC (pulsed field gradient heteronuclear multiple-quantum coherence), 1H, 13C heteronuclear multiple bond correlation (HMBC) experiments, and computer aided 1H NMR spectral analysis. The asymmetry of 2 is also discernible on the 1H NMR parameters. In addition, gas chromatographic (GC) properties and electron impact (EI) mass spectrum of 2 has been studied. Ab initio Hartree-Fock (HF) method with the basis set 6-31G(d) has been used for the optimization of the equilibrium geometry and calculation of total energy for 2. The optimized geometry is in good agreement with the crystal structure. According to the rotation energy profile calculated at the HF/6-31G(d) level, rotation of the chloromethyl and dichloromethyl groups are highly unlikely at the room temperature.