Adsorption of natural organic matter from waters by iron coated pumice

Natural pumice particles were used as granular support media and coated with iron oxides to investigate their adsorptive natural organic matter (NOM) removal from waters. The impacts of natural pumice source, particle size fraction, pumice dose, pumice surface chemistry and specific surface area, and NOM source on the ultimate extent and rate of NOM removal were studied. All adsorption isotherm experiments were conducted employing the variable-dose completely mixed batch reactor bottle-point method. Iron oxide coating overwhelmed the surface electrical properties of the underlying pumice particles. Surface areas as high as 20.6m(2)g(-1) were achieved after iron coating of pumice samples, which are above than those of iron coated sand samples reported in the literature. For all particle size fractions, iron coating of natural pumices significantly increased their NOM uptakes both on an adsorbent mass- and surface area-basis. The smallest size fractions (<63 microm) of coated pumices generally exhibited the highest NOM uptakes. A strong linear correlation between the iron contents of coated pumices and their Freundlich affinity parameters (K(F)) indicated that the enhanced NOM uptake is due to iron oxides bound on pumice surfaces. Iron oxide coated pumice surfaces preferentially removed high UV-absorbing fractions of NOM, with UV absorbance reductions up to 90%. Control experiments indicated that iron oxide species bound on pumice surfaces are stable, and potential iron release to the solution is not a concern at pH values of typical natural waters. Based on high NOM adsorption capacities, iron oxide coated pumice may be a promising novel adsorbent in removing NOM from waters. Furthermore, due to preferential removal of high UV-absorbing NOM fractions, iron oxide coated pumice may also be effective in controlling the formation of disinfection by-products in drinking water treatment.     

Characterizing dissolved organic matter and evaluating associated nanofiltration membrane fouling

Natural organic matter (NOM) characteristics were determined for three ground waters exhibiting different water quality conditions. The water quality of the three feed waters collected at various water table depths was characterized by XAD-8/-4 resin adsorption, high performance size exclusion chromatography with ultraviolet and dissolved organic carbon (DOC) detections, and Fourier transform infrared spectroscopy (FTIR) to determine NOM fractionation, molecular weight, and NOM functional groups, respectively. Systematic studies were conducted to identify potential NOM foulants in ground water for nanofiltration (NF) membrane fouling. The results show that the hydrophobic fraction of NOM in all of the samples was significantly high (71-93%) compared to the hydrophilic (1.7-22.6%) and transphilic (5.3-6.6%) fractions. However, insignificant flux-decline (less than 5%) was observed for the highest DOC (36.9 mg l(-1)) and hydrophobic NOM (93%) containing groundwater compared to the other lesser DOC and hydrophobic NOM containing ground waters. This is presumably due to either higher fractions of hydrophilic and transphilic NOM or inorganic interactions that may be major foulants. Based on FTIR, aromatic foulants were observed at 1662 cm(-1) (CO-NH2 or CO conjugated with aromatic rings) for the fouled NF membrane with the relatively low DOC source waters. The contact angle of the clean membrane (52 degrees ) decreased with fouling up to 42-47 degrees for fouled membranes with the various samples.     

An overview of the methods used in the characterisation of natural organic matter (NOM) in relation to drinking water treatment

Natural organic matter (NOM) is found in all surface, ground and soil waters. During recent decades, reports worldwide show a continuing increase in the color and NOM of the surface water, which has an adverse affect on drinking water purification. For several practical and hygienic reasons, the presence of NOM is undesirable in drinking water. Various technologies have been proposed for NOM removal with varying degrees of success. The properties and amount of NOM, however, can significantly affect the process efficiency. In order to improve and optimise these processes, the characterisation and quantification of NOM at different purification and treatment processes stages is important. It is also important to be able to understand and predict the reactivity of NOM or its fractions in different steps of the treatment. Methods used in the characterisation of NOM include resin adsorption, size exclusion chromatography (SEC), nuclear magnetic resonance (NMR) spectroscopy, and fluorescence spectroscopy. The amount of NOM in water has been predicted with parameters including UV-Vis, total organic carbon (TOC), and specific UV-absorbance (SUVA). Recently, methods by which NOM structures can be more precisely determined have been developed; pyrolysis gas chromatography-mass spectrometry (Py-GC-MS), multidimensional NMR techniques, and Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The present review focuses on the methods used for characterisation and quantification of NOM in relation to drinking water treatment.     

Fluorescence spectroscopic studies of natural organic matter fractions

Because of the well-known molecular complexity and heterogeneity of natural organic matter (NOM), an aquatic bulk NOM was fractionated into well-defined polyphenolic-rich and carbohydrate-rich subfractions. These fractions were systematically characterized by fluorescence emission, three dimensional excitation-emission matrices, and synchronous-scan excitation spectroscopy in comparison with those of the reference International Humic Substances Society soil humic acid and Suwannee River fulvic acid. Results indicate that fluorescence spectroscopy can be useful to qualitatively differentiate not only NOM compounds from varying origins but also NOM subcomponents with varying compositions and functional properties. The polyphenolic-rich NOM-PP fraction exhibited a much more intense fluorescence and a red shift of peak position in comparison with the carbohydrate-rich NOM-CH fraction. Results also indicate that synchronous excitation spectra were able to provide improved peak resolution and structural signatures such as peak positioning, shift, and intensity among various NOM components as compared with those of the emission and excitation spectra. In particular, the synchronous spectral peak intensity and its red shift in the region of about 450-480 nm may be used to indicate the presence or absence of high molecular weight and polycondensed humic organic components, or the multicomponent nature of NOM or NOM subcomponents.     

Spectroscopic and conformational properties of size-fractions separated from a lignite humic acid

A lignite humic acid (HA) was fractionated by preparative high performance size-exclusion chromatography (HPSEC) in seven different size-fractions. The size-fractions were characterized by cross polarization (CP) magic angle spinning (MAS) (13)C NMR spectroscopy and a further analytical HPSEC elution under UV and fluorescence detection. The alkyl hydrophobic components mainly distributed in the largest molecular-size-fraction, whereas the amount of oxidized carbons increased with decreasing size of fractions. Cross polarization time (T(CH)) and proton spin-lattice relaxation time in the rotating frame (T(1rho)(H)) were measured from variable contact time (VCT) experiments. The bulk HA was characterized by the shortest T(CH) values and the longest T(1rho)(H) values which suggested, respectively, one. an aggregation of components in a large conformation that favored a fast H-C cross polarization, and, two. consequent steric hindrances that prevented fast local molecular motions and decreased proton relaxation rates. Conversely, the separated size-fractions showed longer T(CH) values and shorter T(1rho)(H) values than the bulk HA, thereby indicating that they were constituted by a larger number of mobile molecular conformations. The UV and fluorescence absorptions were both low in the large size-fractions that mainly contained alkyl carbons, whereas they increased in the olephinic- and aromatic-rich fractions with intermediate molecular-size, and decreased again in the smaller fractions which were predominantly composed by oxidized carbons. These results support the supramolecular structure of humic substances and indicate that the observed variation in conformational distribution in humic association may be used to explain environmental processes with additional precision.     

Advanced oxidation of natural organic matter using hydrogen peroxide and iron-coated pumice particles

The oxidative removal of natural organic matter (NOM) from waters using hydrogen peroxide and iron-coated pumice particles as heterogeneous catalysts was investigated. Two NOM sources were tested: humic acid solution and a natural source water. Iron coated pumice removed about half of the dissolved organic carbon (DOC) concentration at a dose of 3000 mg l(-1) in 24 h by adsorption only. Original pumice and peroxide dosed together provided UV absorbance reductions as high as 49%, mainly due to the presence of metal oxides including Al(2)O(3), Fe(2)O(3) and TiO(2) in the natural pumice, which are known to catalyze the decomposition of peroxide forming strong oxidants. Coating the original pumice particles with iron oxides significantly enhanced the removal of NOM with peroxide. A strong linear correlation was found between iron contents of coated pumices and UV absorbance reductions. Peroxide consumption also correlated with UV absorbance reduction. Control experiments proved the effective coating and the stability of iron oxide species bound on pumice surfaces. Results overall indicated that in addition to adsorptive removal of NOM by metal oxides on pumice surfaces, surface reactions between iron oxides and peroxide result in the formation of strong oxidants, probably like hydroxyl radicals, which further oxidize both adsorbed NOM and remaining NOM in solution, similar to those in Fenton-like reactions.     

Natural organic matter (NOM) in roof runoff and its impact on the Fe0 treatment system of dissolved metals

The present work investigates the impacts and mechanisms associated with natural organic matter (NOM) in the Fe0 treatment system of Cu2+ and Zn2+ under roof runoff conditions. The NOM in runoff waters was characterized using XAD-4/8 adsorption resins, copper complexation, acidic capacity and liquid chromatography with online carbon detection. Batch kinetic experiments and flow-through configurations were performed and the results of metal removal were elucidated taking into account the characteristics of NOM. Based on the findings, it is shown that NOM influences the removal of metals through several complex pathways. At an un-favored condition for adsorption of metals, i.e., on iron corrosion products, at pH相似文献   

Transformation of effluent organic matter during subsurface wetland treatment in the Sonoran Desert

The fate of dissolved organic matter (DOM) during subsurface wetland treatment of wastewater effluent in a hot, semi-arid environment was examined. The study objectives were to (1) discern changes in the character of dissolved organics as consequence of wetland treatment (2) establish the nature of wetland-derived organic matter, and (3) investigate the impact of wetland treatment on the formation potential of trihalomethanes (THMs). Subsurface wetland treatment produced little change in DOM polarity (hydrophobic-hydrophilic) distribution. Biodegradation of labile effluent organic matter (EfOM) and internal loading of wetland-derived natural organic matter (NOM) together produced only minor changes in the distribution of carbon moieties in hydrophobic acid (HPO-A) and transphilic acid (TPI-A) isolates of wetland effluent. Aliphatic carbon decreased as a percentage of total carbon during wetland treatment. The ratio of atomic C:N in wetland-derived NOM suggests that its character is determined by microbial activity. Formation of THMs upon chlorination of HPO-A and TPI-A isolates increased as a consequence of wetland treatment. Wetland-derived NOM was more reactive in forming THMs and less biodegradable than EfOM. For both HPO-A and TPI-A fractions, relationships between biodegradability and THM formation potential were similar among EfOM and NOM isolates; the less biodegradable isolates exhibited greater THM formation potential.     

Effect of copper(II) on natural organic matter removal during drinking water coagulation using aluminum-based coagulants.

Coagulation has been proposed as a best available technology for controlling natural organic matter (NOM) during drinking water treatment. The presence of heavy metals such as copper(II) in source water, which may form copper-NOM complexes and/or interact with a coagulant, may pose a potential challenge on the coagulation of NOM. In this work, the effect of copper(II) on NOM removal by coagulation using alum or PAX-18 (a commercial polymerized aluminum chloride from Kemiron Inc., Bartow, Florida) was examined. The results show that the presence of 1 to 10 mg/L of copper(H) in the simulated waters improved the total organic carbon (TOC) removal by up to 25% for alum coagulation and by up to 22% for PAX-18 coagulation. The increased NOM removal with the presence of copper(II) in the waters can most likely be ascribed to the formation copper-NOM complexes that may be more adsorbable on aluminum precipitates and to the formation of copper(II) co-precipitates that may also adsorb NOM. The presence of 1 to 5 mg/L of copper(I) in the waters containing 3 mg/L NOM as carbon was reduced below the maximum contaminant level goal (1.3 mg/L as copper) using either coagulant. The results suggest that the presence of copper(H) in source water may not adversely affect the NOM removal by coagulation. A good linear correlation was observed between the TOC removal efficiency and the log-total moles of the precipitated metals, which include the metal ion from a coagulant and the divalent metal ion(s) in source water.     

Spectroscopic characterization of the structural and functional properties of natural organic matter fractions

Natural organic matter (NOM) is known to be complex in nature with varying structural and functional characteristics. In this study, an aquatic NOM was fractionated into the polyphenolic-rich (NOM-PP) and the carbohydrate-rich (NOM-CH) fractions in an attempt to better characterize their chemical and structural properties along with a reference soil humic acid (SHA). Various spectroscopic techniques were employed for the study, including ultraviolet-visible (UV/Vis). 13C-nuclear magnetic resonance, Fourier-transform infrared, fluorescence, and electron paramagnetic resonance spectroscopies. Results indicate that the relative abundance of aromatic C=C and methoxyl (-OCH3) functional groups are in the order of SHA > NOM-PP > NOM-CH. However, the aquatic NOM-PP and NOM-CH fractions are characterized by high contents of carboxylic and alcoholic functional groups relative to the SHA. In particular, the NOM-PP fraction appears to contain more phenolic and ketonic functional groups than the NOM-CH and SHA fractions, and it gives a strong fluorescence and high paramagnetic spin count. On the other hand, the NOM-CH fraction possesses a relatively low amount of carbon but a high amount of oxygen or oxygen-containing structural features, such as carbohydrate-OH and carboxylic groups, and shows the least fluorescence intensity and paramagnetic spin counts. Results of these spectroscopic studies confirm the heterogeneous nature of NOM, and point out the importance of isolation and improved characterization of various NOM subcomponents in order to better understand the behavior and roles of NOM in the natural environment.     

四种净水工艺对水源水微量有机物去除的研究

以UV254和CODMn代表饮用水源水中有机物替代指标.对常规处理、生物陶粒预处理、生物滤池、生物活性炭(BAC)、颗粒活性炭(GAC)、纳滤和光催化氧化进行组合,形成不同的处理流程,研究各流程对UV254和CODMn的去除效果.结果表明,各工艺流程都有一定的处理效率,其中以生物滤池和纳滤为主的组合流程处理效果最佳.此流程对UV254的去除率接近100%,CODMn的去除率达到78.6%,大大提高了饮用水的安全性.     

Photodecomposition of humic acid and natural organic matter in swamp water using a TiO2-coated ceramic foam filter: Potential for the formation of disinfection byproducts

This paper reports on the photodecomposition of aqueous humic acid (HA) by a TiO₂-coated ceramic foam filter (TCF) reactor and on the potential for the formation of disinfection byproducts (DBPs) upon chlorination of the photocatalytically treated solutions. This photocatalytic reactor can also be applied to the removal of natural organic matter (NOM) in swamp waters. The proposed photocatalytic reaction system was operated as per standardized methodologies. First, the ability of the TCF to decompose HA (a representative compound of NOM) was evaluated from the changes in the total organic carbon (TOC) and UV₂₅₄ with the reaction time. Remarkably, TOC removal and UV₂₅₄ values ranging from 44% to 61% and from 60% to 83%, respectively, were achieved. The potential for the formation of DBPs (total trihalomethane and total haloacetic acid) by chlorination of the phototreated solution was strongly dependent on the TOC removal and UV₂₅₄ values in the solution. The degree of photodecomposition of NOMs in the swamp water samples and the DBP formation potential showed similar trends as in the case of the standard solutions containing HA. The method used in this study could be effectively used to evaluate the efficiency of TCF for reducing HA and NOM, while suppressing the formation of DBP products.     

Dissolved organic matter in pore water of freshwater sediments: effects of separation procedure on quantity, quality and functionality

Pore water was separated either with or without water extraction prior to centrifugation (7600 or 20 000 × g) in order to investigate the effects of separation procedure on the amount and properties of dissolved organic matter (DOM i.e. the material passing through a 0.45-μm filter) in three freshwater sediments. On the basis of solubility in alkaline, organic matter was concluded to compose of humic substances in two (S1 and S3) and of humin (S2) in one of the sediments. DOM in the samples was quantified by total organic carbon measurement. Specific UV-absorption (SUVA) and high performance size exclusion chromatography (HPSEC) analyses were used to characterize DOM. Sorption of pyrene was used as a measure for functionality of DOM. Both water extraction and centrifugation speed were shown to affect the properties of DOM; however, the effects were sediment dependent. Water extraction increased the amount of DOM separated from the two sediments that had humic character (S1 and S3). In most cases water extraction increased SUVA and shifted the molecular size distribution of DOM towards larger sizes. The separation procedure had also an effect on the functionality of DOM. In water extracted samples of S2 and S3 the sorption of pyrene was higher than in the corresponding samples separated without water extraction, whereas in S1 similar effect was not found. Generally, centrifugation speed had smaller effects on the properties of DOM than water extraction. The fact that the effects of separation procedure on DOM depend on the sediment characteristics complicates the comparison between samples and evaluation of functionality in field conditions.     

NOM characteristics and treatabilities of ozonation processes

The objectives of this study were intended to evaluate the effects of the characteristics of natural organic matter on the treatabilities of ozonation, coagulation, filtration, and granular activated carbon processes. The ultra-violet absorbance (UV254) was used as a surrogate parameter to assess each process in reducing the disinfection by-product formation potential (DBPFP). The results indicate that the DBPFP varies with the sources of water samples and treatment processes, but is closely related to the measurement of UV254/DOC. Coagulation/sedimentation can eliminate large molecular weight organic fractions. Both pre- and post-ozonation processes can reduce some of DBP precursors than the conventional treatment process, and are more reliable for reducing the overall DBPFP.     

Influence of pH and ozone dose on the content and structure of haloacetic acid precursors in groundwater

This study investigated the effects of pH (6-10) and ozone dose [0.4-3.0?mg O(3)/mg dissolved organic carbon (DOC)] on the content and structure of haloacetic acid (HAA) precursors in groundwater rich in natural organic matter (NOM; DOC 9.85?±?0.18?mg/L) during drinking water treatment. The raw water was ozonated in a 2 L glass column. NOM fractionation was carried out using XAD resins. HAA formation potential (HAAFP) was determined according to standard EPA Method 552. NOM characterization revealed it is mostly hydrophobic (65?% fulvic and 14?% humic acids). Hydrophobic NOM significantly influences HAA formation, as confirmed by the high HAAFP (309?±?15?μg/L). Ozonation at pH?6-10 led to changes in NOM structure, i.e. complete humic acid oxidation, and increased the hydrophilic NOM fraction content (65-90?% achieved using 3.0?mg O(3)/mg DOC). The highest degree of NOM oxidation and HAA precursor removal was achieved at pH?10 (up to 68?% HAAFP). Ozonation pH influenced the distribution of HAA precursor content, as increasing the pH from 6 to 10 increased the reactivity of the hydrophilic fraction, with the HAAFP increasing from 19.1?±?6.0?μg/mg DOC in raw water to 152?±?8?μg/mg DOC in ozonated water. The degree of HAA precursor removal depends on the dominant oxidation mechanism, which is related to the applied ozone dose and the pH of the oxidation process. Ozonation at pH?10 favours the mechanism of radical NOM oxidation and was the most effective for HAAFP reduction, with the efficacy of the process improving with increasing ozone dose.     

Sorption of phenanthrene by nanosized alumina coated with sequentially extracted humic acids

Background, aim, and scope  

Sorption of hydrophobic organic compounds (HOCs) to natural organic matter (NOM) is an important process that affects the transport, transformation, bioavailability, and fate of HOCs in the environment. Manufactured nanoparticles (NPs) such as nano-oxides will inevitably enter the environment in the processes of their production, transfer, and use and could be coated by the ubiquitous NOM. Thus, sorption of HOCs to NOM in the environment could be affected by the NP interactions with NOM. Furthermore, the toxicity of nano-oxides could be increased due to the adsorbed HOCs. Therefore, sorption of phenanthrene by nano-Al₂O₃ coated with humic acid (HA) was examined in this study to explore the possible effect of nanoparticles (NPs) on the environmental behavior of HOCs and the potential environmental and health risks of NPs.     

Removal of NOM from drinking water: Fenton's and photo-Fenton's processes

The control of disinfection by-products during water treatment is primarily undertaken by reducing the levels of precursor species prior to chlorination. As many waters contain natural organic matter at levels of up to 15 mgl(-1) there is a need for a range of control methods to support conventional coagulation. Two such processes are the Fenton and photo-Fenton's processes and in this paper they are assessed for their potential to remove NOM from organic rich waters. The performance of both processes is shown to be depentent on pH, Fe: H2O2 ratio as well as Fe2+ dose. Under optimum conditions both processes achieved greater than 90% removal of DOC and UV254 absorbance. This removal lead to the trihalomethane formation potential of the water being reduced from 140 to below 10 microgl(-1), well below UK and US standards.     

Organic matrix in produced water from the Osage-Skiatook petroleum environmental research site, Osage county, Oklahoma

Produced water (water co-produced with oil and gas) constitutes the single largest waste stream for oil and gas industry. Reclaiming this water for beneficial use is thought to be one of the most practical solutions that can solve both environmental and water shortage problems. The feasibility of this practice depends on the ability to remove its chemical content to the levels that meets the appropriate standards. Organic compounds are probably the most difficult fraction to handle. In this paper, the discrete organic compounds and non-volatile, macromolecular organic compounds (i.e., natural organic matter--NOM) of three produced water samples from the Osage-Skiatook Environmental Research site were characterized. Two of the three produced waters had very little contribution from NOM, while one of the samples had about 23% NOM contribution to its organic matrix pool. Fluorescent spectrophotometric scans provided little differentiation among the organic quality of the produced water, while pyrolysis-GC/MS showed that the NOM characteristics of the three produced waters were distinct. Specifically, the overall halogenated content and aromaticity of the NOM were found to be possible qualifiers that distinguish produced water from the coalbed methane well from produced water from the oil well. And the specific chemical fragments that are linked to polysaccharide sources were found to be potential identifiers that distinguish produced water from the newer oil well from produced water from the older oil well. These identifiers were, however, only suggested for this preliminary study. More samples must be included to build a substantial database on produced water NOM to confirm and identify more markers.     

Sorption and desorption hysteresis of organic contaminants by kerogen in a sandy aquifer material

Sorption and desorption hysteresis of 1,2-dichlorobenzene, 1,3,5-trichlorobenzene, naphthalene, and phenanthrene were investigated for the Borden aquifer material with total organic carbon of 0.021% and the isolated natural organic matter (NOM). The isolated NOM is a kerogen type of organic matter with relatively low maturation degree and contained many different types of organic matters including vitrinite particles. The modified Freundlich sorption capacities (logK^′_f and logK^′_foc) are very close for the sorption of the four solutes by the isolated NOM and the original sand, respectively. Isotherm non-linearity (n value) and hysteric behaviors are related to solute molecular properties (e.g. K_ow and molecular size). Kerogen encapsulated by inorganic matrices in the original aquifer may not be accessed fully by solutes. The larger the hydrophobic organic chemical (HOC) (hydrophobic organic contaminant) molecule is, the lower accessibility of the HOC to kerogen. This study disputes widely held hypothesis that sorption to mineral surfaces may play a major role in the overall sorption by low TOC (e.g. 0.1% by mass) geomaterials such as Borden sand. It also demonstrates the importance of the condensed NOM domain, even at very low contents, in the sorption and desorption hysteresis of HOCs in groundwater systems.     

Synthesis and characterisation of Pd-modified N-doped TiO2 for photocatalytic degradation of natural organic matter (NOM) fractions

Introduction

The removal of natural organic matter (NOM) from water is becoming increasingly important in order to prevent the formation of carcinogenic disinfection by-products. The inadequate removal of NOM has a bearing on the capacity of the other treatment processes to remove organic micro-pollutants or inorganic species that may be present in the water. New methods are therefore currently being sought to effectively characterise NOM and also to ensure that it is sufficiently removed from drinking water sources.

Methodology

Nitrogen- and palladium-co-doped TiO₂ was synthesised by a modified sol?Cgel method and evaluated for its photocatalytic degradation activity on NOM fractions under simulated solar radiation. The photocatalyst was characterised by FT-IR, Raman, XRD, DRUV?Cvis, SEM, TEM, EDS, XPS and TGA. FT-IR confirmed the presence of OH groups on thermally stable, nearly spherical anatase nanoparticles with an average diameter of 20?nm. PdO species appeared on the surface of the TiO₂ as small uniformly dispersed particles (2 to 3?nm). A red shift in the absorption edge compared to commercial anatase TiO₂ was confirmed by DRUV?Cvis. In order to gain a better insight into the response of NOM to photodegradation, the NOM was divided into three different fractions based on its chemical nature.

Results and discussion

Photodegradation efficiencies of 96, 38 and 15?% were realised for the hydrophobic, hydrophilic and transphilic NOM fractions, respectively. A reasonable mechanism was proposed to explain the photocatalytic degradation of the NOM fractions. The high photocatalytic activity could be attributed to the larger surface area, smaller crystalline size and synergistic effects of the co-dopants N and Pd in the TiO₂ crystal.