Biological remediation of explosives and related nitroaromatic compounds

Nitroaromatics form an important group of recalcitrant xenobiotics. Only few aromatic compounds, bearing one nitro group as a substituent of the aromatic ring, are produced as secondary metabolites by microorganisms. The majority of nitroaromatic compounds in the biosphere are industrial chemicals such as explosives, dyes, polyurethane foams, herbicides, insecticides and solvents. These compounds are generally recalcitrant to biological treatment and remain in the biosphere, where they constitute a source of pollution due to both toxic and mutagenic effects on humans, fish, algae and microorganisms. However, relatively few microorganisms have been described as being able to use nitroaromatic compounds as nitrogen and/or carbon and energy source. The best-known nitroaromatic compound is the explosive TNT (2,4,6-trinitrotoluene). This article reviews the bioremediation strategies for TNT-contaminated soil and water. It comes to the following conclusion: The optimal remediation strategy for nitroaromatic compounds depends on many site-specific factors. Composting and the use of reactor systems lend themselves to treating soils contaminated with high levels of explosives (e.g. at former ammunition production facilities, where areas with a high contamination level are common). Compared to composting systems, bioreactors have the major advantage of a short treatment time, but the disadvantage of being more labour intensive and more expensive. Studies indicate that biological treatment systems, which are based on the activity of the fungus Phanerochaete chrysosporium or on Pseudomonas sp. ST53, might be used as effective methods for the remediation of highly contaminated soil and water. Phytoremediation, although not widely used now, has the potential to become an important strategy for the remediation of soil and water contaminated with explosives. It is best suited where contaminant levels are low (e.g. at military sites where pollution is rather diffuse) and where larger contaminated surfaces or volumes have to be treated. In addition, phytoremediation can be used as a polishing method after other remediation treatments, such as composting or bioslurry, have taken place. This in-situ treatment method has the advantage of lower treatment costs, but has the disadvantage of a considerable longer treatment time. In order to improve the cost-efficiency, phytoremediation of nitroaromatics (and other organic xenobiotics) could be combined with bio-energy production. This requires, however, detailed knowledge on the fate of the contaminants in the plants as well as the development of efficient treatment methods for the contaminated biomass that minimise the spreading of the contaminants into the environment during post harvest treatment.     

Attenuation reactions in a multiple contaminated aquifer in Bitterfeld (Germany)

Large-scale contaminated sites with multiple contaminants in the groundwater present a challenge to risk assessment and remediation. Attenuation reactions take place in the subsurface and act to contain contaminants, but must be thoroughly investigated on a site-specific basis. Field data from monitoring wells at a contaminated industrial site in Bitterfeld, Germany, are presented and analyzed for evidence of the prevalent biodegradation reactions. The groundwater in the Tertiary aquifer is contaminated with large quantities of chlorinated aliphatic compounds, in addition to chlorobenzenes and BTEX. In this strictly anaerobic environment, geochemical indications for several microbial processes were found, including methanogenesis, sulfate and iron reduction as well as reductive dechlorination of the chlorinated hydrocarbons. Direct evidence for the latter degradation reaction was observed along the flowpath due to the appearance of intermediates and an increase in the degree of dechlorination.     

Use of principal component analysis to profile temporal and spatial variations of chlorinated solvent concentration in groundwater

This work aims at evaluating spatial distribution patterns of concentration variations for chlorinated solvents in groundwater, based on principal component analysis and geographic information system (GIS) tools. The study investigates long-time series of chlorinated solvent concentrations in groundwater measured for 18 contaminated industrial sites. The characterization of contaminant plumes and delineation of pollutant sources are essential for choosing appropriate monitoring and remediation strategies, as contaminated groundwaters are characterized by complex patterns of spatial and temporal concentration variability, with wide unpredictable fluctuations over time. The present work describes the results of a new exploratory statistical method called the Variability Index Method (VIM) applied to environmental data to assess the performance of using concentration variations as molecular tracers to reveal aquifer dynamics, industrial impacts, and point sources for contamination plumes. The application of this method provides a useful assessment of controls over contaminant concentration variations as well as support for remediation techniques.     

Contaminated site remedial investigation and feasibility removal of chlorinated volatile organic compounds from groundwater by activated carbon fiber adsorption

Groundwater contaminated by dense, non-aqueous phase liquids (DNAPLs) such as chlorinated solvents has become a serious problem in some regions of Taiwan. The sources of these contaminants are due to industrial discharges. These chlorinated volatile organic compounds (VOCs) have been proven to be carcinogenic to humans. The groundwater is used for domestic drinking water supply in some cities of Taiwan and the severely contaminated groundwater has to be treated in order to meet the requirement of drinking water standards. This study covers two areas of work. In the first part, polluted groundwater samples were collected from the contaminated site and analytical results indicated measurable concentrations of 12 representative chlorinated VOCs in water samples. The primary VOCs detected included trichloroethene (TCE), tetrachloroethene (PCE), 1,1,2-trichloroethane (1,1,2-TCA), and 1,1-dichloroethene (1,1-DCE). Second, to remove VOCs groundwater was treated using adsorption on activated carbon fiber (ACF). This involved pumping groundwater through vessels containing ACF. Most VOCs, including TCE, PCE, 1,1,2-TCA, and DCE, were readily adsorbed onto ACF and are removed from the water stream. Our study showed that the technology was able to significantly reduce chlorinated VOCs concentrations in groundwater.     

Human health risks of petroleum-contaminated groundwater

BACKGROUND, AIM AND SCOPE: The volatile organic compounds Benzene, Toluene, Ethylbenzene and Xylene (BTEX) are commonly found in petroleum derivatives and, at relatively high levels, can be associated with human health risks. Due to industrial activities, accidental petroleum spills are the main route of soil and groundwater contamination. The aim of the present study was to evaluate the indoor health risks due to tap water consumption contaminated by BTEX. MATERIALS AND METHODS: BTEX indoor exposure can occur through three principal pathways: inhalation, ingestion and dermal absorption. A multiphase and multicomponent model was used to simulate BTEX transport in groundwater. For evaluation of human risks due to the use of contaminated tap water, a mathematical model was elaborated. RESULTS: BTEX concentrations in a drinking well were obtained as a function over time. These concentrations were used to obtain the exposure due to the use of water from the contaminated drinking well. In addition to showing the highest concentration in water, benzene was the compound that remained for a longer period before being completely degraded. For all the evaluated BTEX, oral ingestion was also the main pathway of exposure for adults, whereas the contribution of inhalation and oral exposition in children were seen to be of the same magnitude. The sensitivity analysis of BTEX total dose for adults showed that direct ingestion was the most significant factor, followed by shower time, volume of the shower room, inhalation rate, and shower flow rate. For children, the most significant variable was also direct ingestion, followed by shower time, volume of the shower room, and body weight. DISCUSSION: In the current design situation, there would not be any health risks by the use of BTEX-contaminated water to the general population living in the neighborhood of the petroleum spill. Therefore, no remediation measures in the area of the spill would be necessary. CONCLUSIONS: The present results indicate that the design of a good scenario can perform an accuracy risk assessment. This model can serve as a useful tool for predicting indoor exposure to substances for which no direct data are available, reducing monitoring efforts and observing how different processes affect outcomes. RECOMMENDATIONS AND PERSPECTIVES: These preliminary data allow the establishment of a basis for further investigations focusing on efficiently recovering petroleum from contaminated sites.     

A multi-process phytoremediation system for removal of polycyclic aromatic hydrocarbons from contaminated soils

To improve phytoremediation processes, multiple techniques that comprise different aspects of contaminant removal from soils have been combined. Using creosote as a test contaminant, a multi-process phytoremediation system composed of physical (volatilization), photochemical (photooxidation) and microbial remediation, and phytoremediation (plant-assisted remediation) processes was developed. The techniques applied to realize these processes were land-farming (aeration and light exposure), introduction of contaminant degrading bacteria, plant growth promoting rhizobacteria (PGPR), and plant growth of contaminant-tolerant tall fescue (Festuca arundinacea). Over a 4-month period, the average efficiency of removal of 16 priority PAHs by the multi-process remediation system was twice that of land-farming, 50% more than bioremediation alone, and 45% more than phytoremediation by itself. Importantly, the multi-process system was capable of removing most of the highly hydrophobic, soil-bound PAHs from soil. The key elements for successful phytoremediation were the use of plant species that have the ability to proliferate in the presence of high levels of contaminants and strains of PGPR that increase plant tolerance to contaminants and accelerate plant growth in heavily contaminated soils. The synergistic use of these approaches resulted in rapid and massive biomass accumulation of plant tissue in contaminated soil, putatively providing more active metabolic processes, leading to more rapid and more complete removal of PAHs.     

Chlorophenols and other related derivatives of environmental concern: properties, distribution and microbial degradation processes

Chlorophenols are chlorinated aromatic compound structures and are commonly found in pesticide preparations as well as industrial wastes. They are recalcitrant to biodegradation and consequently persistent in the environment. A variety of chlorophenols derivatives compounds are highly toxic, mutagenic and carcinogenic for living organisms. Biological transformation by microorganisms is one of the key remediation options that can be exploited to solve environmental pollution problems caused by these notorious compounds. The key enzymes in the microbial degradation of chlorophenols are the oxygenases and dioxygenases. These enzymes can be engineered for enhanced degradation of highly chlorinated aromatic compounds through directed evolution methods. This review underscores the mechanisms of chlorophenols biodegradation with the view to understanding how bioremediation processes can be optimized for cleaning up chloroaromatic contaminated environments.     

Factors controlling BTEX and chlorinated solvents plume length under natural attenuation conditions

Natural attenuation is presently used at numerous sites where groundwater is contaminated. In order to simulate this attenuation, reactive transport models are often used but they are quite complex and depend on both physical and chemical conditions in the aquifer. As complex numerical models cannot be used to study all possible cases, we develop here analytical solutions to draw general conclusions. Our strategy, called MIKSS (Mixed Instantaneous and Kinetics Superposition Sequence), allows the calculation of the concentrations of all reacting substances in a plume. It is an extension of the superimposition principle that is able to treat the case of joint kinetics and instantaneous reactions. The basic equations have been extended to treat different reactions that occur in the plume core and at its fringe. At first we consider one organic substance degraded under all oxidising conditions (toluene for instance). For this problem the size of the plume depends on the reduced source width and on the ratio of the organic substance concentration to the sum of the electron acceptors' concentrations. For several BTEX substances having different degradation behaviour the formulation is similar, but leads to quite different plume lengths for each substance. Contrary to the case of one substance, the plumes can be quite long and may not satisfy the target risk level. For chlorinated solvents we developed a specific approach to take under consideration all reactions and particularly the competition for hydrogen. A formula is given to assess the size of the plume core, i.e. the zone with highly reducing conditions. The factors influencing the core length are the same as for BTEX (source width, dispersivity, organic carbon content). The size of the TCE plume is calculated from the plume core length and the kinetic constant of TCE degradation. Using assumptions of degradation constants for DCE and VC it is also possible to calculate the longitudinal concentration profile of these substances. The degradation of moderately substituted solvents under oxic conditions reduces the size of their plumes but under these conditions TCE becomes the major threat. Among the conditions studied in this paper, very few chlorinated solvents sites can lead to a negligible risk at an acceptable distance from the source.     

Dendroremediation of trinitrotoluene (TNT) part 1: Literature overview and research concept

BACKGROUND, AIM AND SCOPE: For decades, very large areas of former military sites have been contaminated diffusely with the persistent nitroaromatic explosive 2,4,6-trinitrotoluene (TNT). The recalcitrance of the environmental hazard TNT is to a great extent due to its particulate soil existence, which leads to slow but continuous leaching processes. Although improper handling during the manufacture of TNT seems to be a problem of the past in developed countries, environmental deposition of TNT and other explosives is still going on unfortunately, resulting from thousands of unexploded ordnance or low order explosions at munitions test areas and at current battlefields. OBJECTIVE: Sustainable phytoremediation strategies for explosives in Germany, which intend to use trees to decontaminate soil and groundwater ('dendroremediation'), have to consider that most of the former German military sites are already covered with woodlands, mainly with conifer stands. Therefore, parallel investigation of the remediation potential is necessary for both of the selected hybrids of fast growing broadleaf trees, which are waiting for planting and forest conifers, which have already proven for decades that they are able to grow on explosive contaminated sites. MAIN FEATURES: A short literature review is given regarding phytoremediation of TNT with herbaceous plants and some general aspects of dendroremediation are discussed. Furthermore, an overview of our TNT-dendroremediation research network is introduced, which has the strategic goal to make dendroremediation more calculable for a series of potent trees for site-adapted in situ application and for the assessment of tree remediation potentials in natural attenuation processes. RESULTS AND DISCUSSION: Some of our methods, results and conclusions yet unpublished are presented. For a preliminary calculation of area-related annual TNT dendroremediation potential of five-year-old trees, the following values were assessed: Salix EW-13 6.0, Salix EW-20 8.5, Populus ZP-007 4.2, Betula pendula 5.2, Picea abies 1.9 and Pinus sylvestris 0.8 g m(-2) a(-1). For a 45-year-old spruce forest, an annual natural attenuation potential of 4.2 g TNT m(-2) a(-1) was found. CONCLUSION, RECOMMENDATIONS AND PERSPECTIVE: Our main results deliver quantitative proposals for dendroremediation strategies in situ and provide decision aids. Also aspects of growth of raw materials for energy production are considered. Our dendroremediation research concept for TNT and its congeners can be easily completed for other trees of interest and it can also be applied to herbaceous plants. Knowing the current bottlenecks of phytoremediation and considering the known environmental behaviour of other contaminants, elements of our methodological approach may be easily adapted to those pollutant groups, e.g. for pesticides, pharmaceuticals, PAHs, chlorinated recalcitrants and, with some restrictions, to inorganics and to multiple contaminations. Our dynamical dendrotolerance test systems will help to predict tree growth on polluted areas. To provide some light into the black box of TNT dendroremediation, experimental data regarding the uptake, distribution and degradation of [14C]-TNT in mature tree tissues will be reported in the second part of this publication.     

From classic methodologies to application of nanomaterials for soil remediation: an integrated view of methods for decontamination of toxic metal(oid)s

Soil pollution with toxic elements is a recurrent issue due to environmental disasters, fossil fuel burning, urbanization, and industrialization, which have contributed to soil contamination over the years. Therefore, the remediation of toxic metals in soil is always an important topic since contaminated soil can affect the environment, agricultural safety, and human health. Many remediation methods have been developed; however, it is essential to ensure that they are safe, and also take into account the limitation of each methodology (including high energy input and generation of residues). This scenario has motivated this review, where we explore soil contamination with arsenic, lead, mercury, and chromium and summarize information about the methods employed to remediate each of these toxic elements such as phytoremediation, soil washing, electrokinetic remediation, and nanoparticles besides elucidating some mechanisms involved in the remediation. Considering all the discussed techniques, nowadays, different techniques can be combined together in order to improve the efficiency of remediation besides the new approach of the techniques and the use of one technique for remediating more than one contaminant.     

Electrokinetic-enhanced phytoremediation of soils: Status and opportunities

Phytoremediation is a sustainable process in which green plants are used for the removal or elimination of contaminants in soils. Both organic and inorganic contaminants can be removed or degraded by growing plants by several mechanisms, namely phytoaccumulation, phytostabilization, phytodegradation, rhizofiltration and rhizodegradation. Phytoremediation has several advantages: it can be applied in situ over large areas, the cost is low, and the soil does not undergo significant damages. However, the restoration of a contaminated site by phytoremediation requires a long treatment time since the remediation depends on the growth and the biological cycles of the plant. It is only applicable for shallow depths within the reach of the roots, and the remediation efficiency largely depends on the physico-chemical properties of the soil and the bioavailability of the contaminants. The combination of phytoremediation and electrokinetics has been proposed in an attempt to avoid, in part, the limitations of phytoremediation. Basically, the coupled phytoremediation–electrokinetic technology consists of the application of a low intensity electric field to the contaminated soil in the vicinity of growing plants. The electric field may enhance the removal of the contaminants by increasing the bioavailability of the contaminants. Variables that affect the coupled technology are: the use of AC or DC current, voltage level and mode of voltage application (continuous or periodic), soil pH evolution, and the addition of facilitating agents to enhance the mobility and bioavailability of the contaminants. Several technical and practical challenges still remain that must be overcome through future research for successful application of this coupled technology at actual field sites.     

An assessment of natural biotransformation of petroleum hydrocarbons and chlorinated solvents at an aquifer plume transect

Field biogeochemical characterization and laboratory microcosm studies were performed to assess the potential for future biotransformation of trichloroethylene (TCE) and toluene in a plume containing petroleum hydrocarbons and chlorinated solvents at the former Wurtsmith Air Force Base in Oscoda, MI. In situ terminal electron accepting processes (TEAPs), contaminant composition and microbial phylogeny were studied at a plume transect 100 m downgradient of the source. The presence of reduced electron acceptors, relevant microbial communities, and elevated dissolved methane and carbon dioxide concentrations at the transect, as well as downgradient accumulation of BTEX metabolites and dechlorination products, indicated that past or current reductive dechlorination at the transect was likely driven by BTEX biodegradation in the methanogenic zone. However, TCE and toluene mineralization in sediment-groundwater microcosms without added electron acceptors did not exceed 5% during 300 days of incubation and was nearly invariant with original sediment TEAP, even following amendments of nitrogen and phosphorus. Mineralization rates were on the order of 0.0015-0.03 mumol/g day. After 8 months, microcosms showed evidence of methanogenesis, but CH4 and CO2 production arose from the degradation of contaminants other than toluene. Cis-dichloroethylene was observed in only one methanogenic microcosm after more than 500 days. It appears likely that spatially and temporally dynamic redox zonation at the plume transect will prevent future sustained reductive dehalogenation of highly chlorinated solvents, for during the course of a year, the predominant TEAP at the highly contaminated water table shifted from methanogenesis to iron- and sulfate-reduction. It is recommended that biotransformation studies combine considerations of long-term, spatially relevant changes in redox zonation with laboratory-scale studies of electron donor utilization and cometabolic substrate transformation to yield a more accurate assessment of natural bioattenuation of specific pollutants in aquifers contaminated by undefined organic waste mixtures.     

Anaerobic transformations and bioremediation of chlorinated solvents

Chlorinated aliphatic compounds, notably the chlorinated solvents, are common contaminants in soil and groundwater at hazardous waste sites. While these compounds are often recalcitrant, under favorable conditions they can be transformed and degraded through microbially mediated processes. There is great interest in understanding the transformations that are observed at contaminated sites and in manipulating these systems to achieve remediation. An important class of transformations occurs in anaerobic environments. Many of the transformations are reductive, and many yield useful energy to specific anaerobic bacteria. They include reductive dechlorination, dehydrochlorination and dichloroelemination. Of these, reductive dechlorination is often a growth-supporting reaction, while the others may be abiological or catalyzed by biological molecules. The reactions may result in chlorinated products, but there are often reaction sequences leading to completely dechlorinated products. The behavior of carbon tetrachloride (CT), 1,1,2,2-tetrachloroethane (TeCA) and the chloroethenes, perchloroethylene (PCE) and trichloroethylene (TCE), illustrate the range of anaerobic transformations that are possible, as well as the limited transformation that often is seen in the environment. CT undergoes reductive and substitutive reactions that are catalyzed by biological molecules but do not support bacterial growth. The anaerobic degradation of TeCA, which is a major contaminant at a site near Tacoma, WA, USA, provides examples of each type of transformation, and the products formed are consistent with the chlorinated compounds that are found in groundwater extraction wells. A laboratory study, using anaerobic sludge that had been fed chlorinated compounds, a cell-free extract from the sludge, and killed controls, showed that TeCA was transformed to four products and that these were further transformed, suggesting that it might be possible to degrade TeCA to innocuous products. Reductive dechlorination of PCE and TCE has been studied in many laboratories. Studies with mixed anaerobic consortia and with several dehalogenating bacteria, including strain 195 (. Isolation of a bacterium that reductively dechlorinates tetrachloroethane to ethane. Science 276, 1568-1571) that transforms PCE to ethene, have demonstrated that reductive dechlorination supports growth of the novel bacteria that carry out the reactions. Hydrogen has been shown to be an electron donor for the bacterial dehalogenation reactions, and kinetic and thermodynamic considerations indicate that dehalogenators can compete in some, but not all, anaerobic environments, pointing to applications of in situ bioremediation and to its limitations. Selected field studies of anaerobic transformations help delineate the applications of this type of bioremediation.     

Dechlorination comparison of mono-substituted PCBs with Mg/Pd in different solvent systems

It is widely recognized that polychlorinated biphenyls (PCBs) are a dangerous environmental pollutant. Even though the use and production of PCBs have been restricted, heavy industrial use has made them a wide-spread environmental issue today. Dehalogenation using zero-valent metals has been a promising avenue of research for the remediation of chlorinated compounds and other contaminants that are present in the environment. However, zero-valent metals by themselves have shown little capability of dechlorinating polychlorinated biphenyls (PCBs). Mechanically alloying the metal with a catalyst, such as palladium, creates a bimetallic system capable of dechlorinating PCBs very rapidly to biphenyl. This study primarily aims to evaluate the effects of solvent specificity on the kinetics of mono-substituted PCBs, in an attempt to determine the mechanism of degradation. Rate constants and final byproducts were determined for the contaminant systems in both water and methanol, and significant differences in the relative rates of reaction were observed between the two solvents.     

不同处理条件对石油污染土壤植物修复的影响

针对石油烃植物修复过程中的主要影响因素,研究了不同植物种类、不同土壤调理剂和菌剂使用等不同条件对土壤中石油烃植物修复效果的影响.结果表明,不同种类的植物修复可使总石油烃的年降解率达到37.8％ ～ 73.98％,其中大豆和碱蓬具有较好的修复效果;3种不同土壤调理剂对石油烃污染土壤修复的效果为商业添加剂＞牛粪＞蛭石;先微生物修复后种植植物的处理要优于单独的微生物修复及微生物、植物修复同步进行的处理.     

Brassica napus hairy roots and rhizobacteria for phenolic compounds removal

Phenolic compounds are contaminants frequently found in water and soils. In the last years, some technologies such as phytoremediation have emerged to remediate contaminated sites. Plants alone are unable to completely degrade some pollutants; therefore, their association with rhizospheric bacteria has been proposed to increase phytoremediation potential, an approach called rhizoremediation. In this work, the ability of two rhizobacteria, Burkholderia kururiensis KP 23 and Agrobacterium rhizogenes LBA 9402, to tolerate and degrade phenolic compounds was evaluated. Both microorganisms were capable of tolerating high concentrations of phenol, 2,4-dichlorophenol (2,4-DCP), guaiacol, or pentachlorophenol (PCP), and degrading different concentrations of phenol and 2,4-DCP. Association of these bacterial strains with B. napus hairy roots, as model plant system, showed that the presence of both rhizospheric microorganisms, along with B. napus hairy roots, enhanced phenol degradation compared to B. napus hairy roots alone. These findings are interesting for future applications of these strains in phenol rhizoremediation processes, with whole plants, providing an efficient, economic, and sustainable remediation technology.     

污染土壤及地下水修复的PRB技术及展望

PRB技术是一类就地修复污染土壤及地下水的新型技术 ,主要由注入井、浸提井和监测井3部分所组成。污染地区的水文地质学研究 ,是实施该技术的关键 ;化学活性物质的筛选、注入的部位、浓度、速率以及是否均匀分布 ,是该技术是否有效的关键要素。胶态零价铁PRB技术 ,被证明是一项修复由卤代烃、卤代芳烃和有机氯农药以及一些有毒金属 (如铬、硒、铀、砷和锝等 )引起的土壤及地下水污染的有效技术。尽管这些技术存在一定的弊病 ,但与传统的处理方法相比 ,其技术上的优势是十分明显的。可以预料 ,这一技术在我国有良好的应用前景     

Establishing best practice for microbially aided phytoremediation

The dispersal of industrial and municipal wastes leads to an increase of contaminated soils and is one of the large concerns in many countries throughout Europe regarding environmental issues. This article proposes a sequence of the microbially aided phytoremediation (phytoextraction and phytostabilization) procedure with the following most important steps: (1) risk assessment, (2) site investigation, (3) determination of the remediation strategy, (4) realization of remediation measures, (5) monitoring, and (6) reuse of the remediated site. UMBRELLA's innovative approach is a proposal of methods to evolve a tool-box which supports phytoremediation by means of microbes and enhances the efficiency of the remediation process at low and heterogeneously metal contaminated sites.     

Phytoremediation of contaminated soils and groundwater: lessons from the field

Background, aim, and scope

The use of plants and associated microorganisms to remove, contain, inactivate, or degrade harmful environmental contaminants (generally termed phytoremediation) and to revitalize contaminated sites is gaining more and more attention. In this review, prerequisites for a successful remediation will be discussed. The performance of phytoremediation as an environmental remediation technology indeed depends on several factors including the extent of soil contamination, the availability and accessibility of contaminants for rhizosphere microorganisms and uptake into roots (bioavailability), and the ability of the plant and its associated microorganisms to intercept, absorb, accumulate, and/or degrade the contaminants. The main aim is to provide an overview of existing field experience in Europe concerning the use of plants and their associated microorganisms whether or not combined with amendments for the revitalization or remediation of contaminated soils and undeep groundwater. Contaminations with trace elements (except radionuclides) and organics will be considered. Because remediation with transgenic organisms is largely untested in the field, this topic is not covered in this review. Brief attention will be paid to the economical aspects, use, and processing of the biomass.

Conclusions and perspectives

It is clear that in spite of a growing public and commercial interest and the success of several pilot studies and field scale applications more fundamental research still is needed to better exploit the metabolic diversity of the plants themselves, but also to better understand the complex interactions between contaminants, soil, plant roots, and microorganisms (bacteria and mycorrhiza) in the rhizosphere. Further, more data are still needed to quantify the underlying economics, as a support for public acceptance and last but not least to convince policy makers and stakeholders (who are not very familiar with such techniques).     

Potential of Hemidesmus indicus for phytoextraction of lead from industrially contaminated soils

Many sites in the industrial region of Kattedan near Hyderabad, Andhra Pradesh (AP), India are contaminated with high concentrations of lead. The use of plants to remove toxic metals from soils (phytoremediation) is emerging as a potential strategy for cost-effective and environmentally sound remediation of contaminated soils. We studied remediation of soils contaminated with lead using a lead hyperaccumulating plant, Hemidesmus indicus. The ability of this plant to accumulate lead in shoots and roots was studied with pot experiments. The results showed that accumulation was maximum in roots for the first 1-3 weeks and later for a contact period of three months, the accumulation rate was maximum in shoots. In addition we used various chelating agents such as EDTA, HEDTA, DTPA and CDTA to determine the best chemical modifier for efficient lead removal from contaminated soils. The effect on lead accumulation of plant in the presence of various metal co-ions was also studied. An attempt was made for the decontamination of lead from five different "Real-life" soils of Kattedan using H. indicus.