Spatial and temporal analysis of pesticides concentrations in surface water: pesticides atlas

Dutch water boards have a well-established program for monitoring pesticide contamination of surface waters. These monitoring data have been processed into a graphic format accessible online and designed to provide insight into pesticide presence in Dutch surface waters and trends over time: the Pesticides Atlas (http://www.pesticidesatlas.nl). With this tool one can easily get maps of where a pesticide is being measured and where it might possibly constitute an environmental problem over the years. Presently, results of the periods 1997/1998 until 2005/2006 are available at the level of individual active ingredients. At a national level, the percentage of pesticides concentrations that exceed the maximum tolerable risk has declined 30% to 38% over the years 2003/2004 compared with 1997/1998. This means that surface water quality in the Netherlands has improved with respect to pesticides, however there are still many locations at which the measured concentrations exceed the environmental quality standards. The results on linking land use to pesticides concentrations were shown to assist in optimization of monitoring programs. By developing the present Internet tool, many new opportunities for environmental risk assessment and risk management were identified, e.g. optimization of monitoring strategies and communication to policymakers.     

Assessment and review of organochlorine pesticide pollution in Kyrgyzstan

The current study describes the preliminary assessment and securing activities of the largest and most hazardous POPs-contaminated sites in Kyrgyzstan. In 2010, cattle died and population were found with high pesticide levels in blood, human milk, and placenta. In the first phase of the study, a historic assessment of the pesticide dumping at the landfill/dump sites have been conducted. In the second phase, soil analysis for organochlorine pesticides in the areas of the pesticide disposal sites, the former pesticides storehouses, agro-air strips, and the cotton-growing fields were conducted. By this assessment, a first overview of the types and sources of pollution and of the scale of the problem is compiled including information gaps. From major pesticides used, DDT, DDE, and HCH were measured in the highest concentrations. With the limited analytical capacity present, a reasonable risk assessment could be performed. This paper also reports on practical risk reduction measures that have been carried out recently at the two major pesticide disposal sites with support of a Dutch environmental engineering company, an international NGO (Green Cross Switzerland) and local authorities from the Suzak region within an UN project. Local population living near the sites of the former pesticide storehouses and agro-airstrips are advised not to cultivate vegetables and melons or to raise cattle on these areas. Instead, it is recommended to grow technical crops or plant trees. Further recommendations on monitoring and assessment is given including the suggestion to consider the findings in the National Implementation Plan of Kyrgyzstan.     

The ChimERA project: coupling mechanistic exposure and effect models into an integrated platform for ecological risk assessment

Current techniques for the ecological risk assessment of chemical substances are often criticised for their lack of environmental realism, ecological relevance and methodological accuracy. ChimERA is a 3-year project (2013–2016), funded by Cefic’s Long Range Initiative (LRI) that aims to address some of these concerns by developing and testing mechanistic fate and effect models, and coupling of these models into one integrated platform for risk assessment. This paper discusses the backdrop against which this project was initiated and lists its objectives and planned methodology.     

Raman and SERS spectra of thiamethoxam and the Ag3–thiamethoxam complex: an experimental and theoretical investigation

Dutch water boards have a well-established program for monitoring pesticide contamination of surface waters. These monitoring data have been processed into a graphic format accessible online and designed to provide insight into pesticide presence in Dutch surface waters and trends over time: the Pesticides Atlas (http://www.pesticidesatlas.nl). With this tool one can easily get maps of where a pesticide is being measured and where it might possibly constitute an environmental problem over the years. Presently, results of the periods 1997/1998 until 2005/2006 are available at the level of individual active ingredients. At a national level, the percentage of pesticides concentrations that exceed the maximum tolerable risk has declined 30% to 38% over the years 2003/2004 compared with 1997/1998. This means that surface water quality in the Netherlands has improved with respect to pesticides, however there are still many locations at which the measured concentrations exceed the environmental quality standards. The results on linking land use to pesticides concentrations were shown to assist in optimization of monitoring programs. By developing the present Internet tool, many new opportunities for environmental risk assessment and risk management were identified, e.g. optimization of monitoring strategies and communication to policymakers.     

基于水动力数值模型的港口规划累积影响评价

累积影响评价是战略环境评价的主要方法和重要内容之一,但目前还缺乏通用的评价程序和方法.通过识别港口规划的累积影响源和途径,建立了基于水动力数值模型的累积影响评价的量化评估和分析框架.以厦门港嵩屿港区规划为例,通过对海湾纳潮量及各敏感点流速的模拟,计算淤积量及其分布变化,进而推测海域水质和底质变化,并分析了由此引起的海洋生物群落的变化趋势.通过比较不同岸线方案的累积影响,为港区岸线优选提供了科学判据.实践表明,该方法框架综合运用定量预测和定性分析手段,其结果能为港口规划的战略环境评价提供科学依据.     

European union system for the evaluation of substances: the second version

This publication presents major changes in the assessment of the risks of chemicals to human health and the environment as implemented in the second version of the European Union System for the Evaluation of Substances, EUSES 2.0. EUSES is a harmonised quantitative risk assessment tool for chemicals. It is the PC-implementation of the technical guidelines developed within the framework of EU chemical legislation for industrial chemicals and biocides. As such, it is designed to support decision making by risk managers in government and industry and to assist scientific institutions in the risk assessment for these substances. The development of EUSES 2.0 is a co-ordinated project of the European Chemicals Bureau, EU Member States and the European chemical industry. Several model concepts, the technical background and the user interface of EUSES have been improved considerably. Major changes in the environmental assessment such as the implementation of emission scenario documents for industrial chemicals and biocides, the addition of the marine risk assessment, the enhancement of the regional model to include global scales, and improvements in the secondary poisoning and environmental effects modelling will be discussed. The update of the human risk assessment module in EUSES focuses on the risk characterisation for both threshold and non-threshold substances with, among others, the introduction of assessment factors. The performance of EUSES is illustrated in an example showing the human and environmental risk assessment of a sanitation disinfectant for private use.     

Haloacetic acids in the aquatic environment. Part II: ecological risk assessment

Haloacetic acids (HAAs) are environmental contaminants found in aquatic ecosystems throughout the world as a result of both anthropogenic and natural production. The ecological risk posed by these compounds to organisms in freshwater environments, with a specific focus on aquatic macrophytes, was characterized. The plants evaluated were Lemna gibba, Myriophyllum spicatum and M. sibiricum and the HAAs screened were monochloroacetic acid (MCA), dichloroacetic acid (DCA), trichloroacetic acid (TCA), trifluoroacetic acid (TFA) and chlorodifluoroacetic acid (CDFA). Laboratory toxicity data formed the basis of the risk assessment, but field studies were also utilized. The estimated risk was calculated using hazard quotients (HQ), as well as effect measure distributions (EMD) in a modified probabilistic ecological risk assessment. EMDs were used to estimate HAA thresholds of toxicity for use in HQ assessments. This threshold was found to be a more sensitive measure of low toxicity than the no observed effect concentrations (NOEC) or the effective concentration (EC10). Using both deterministic and probabilistic methods, it was found that HAAs do not pose a significant risk to freshwater macrophytes at current environmental concentrations in Canada, Europe or Africa for both single compound and mixture exposures. Still, HAAs are generally found as mixtures and their potential interactions are not fully understood, rendering this phase of the assessment uncertain and justifying further effects characterization. TCA in some environments poses a slight risk to phytoplankton and future concentrations of TFA and CDFA are likely to increase due to their recalcitrant nature, warranting continued environmental surveillance of HAAs.     

Biochemical biomarkers in environmental studies—lessons learnt from enzymes catalase,glutathione <Emphasis Type="Italic">S</Emphasis>-transferase and cholinesterase in two crustacean species

Background, aim and scope  

For reliable environmental risk assessment of pollutants, knowledge on the effects at different levels of biological organisation is needed. During the early days of biomarker research in environmental studies approximately two decades ago, biochemical biomarkers were considered as the most promising tool for such purposes. Among these, three enzymes have often been studied: catalase (CAT), glutathione S-transferase (GST) and cholinesterase (ChE). However, despite their intensive research, their measurements in invertebrates have not been commonly applied in environmental risk assessment (ERA) or for regulatory purposes.     

The application of predictive models in the environmental risk assessment of ECONOR

Environmental risk assessment of products requires information on the physico-chemical properties, persistence and ecotoxicity of the product, its constituents and possible metabolic and degradation products. Experimental investigations are usually required to generate this information and consequently risk assessment can be costly and time consuming. One possible approach to minimising the amount of experimental testing is to supplement experimental data with data predicted using models such as quantitative structure-activity relationships (QSARs). Using these models, information can be generated based primarily on the knowledge of the chemical structure of the substance(s) under investigation. In this study predictive models were used to assess the environmental risk of the veterinary medicine, ECONOR which contains the active ingredient valnemulin. Available experimental data on the properties, degradability and ecotoxicity of valnemulin was supplemented with predicted data. Where possible, experimental data was used to validate the predicted approaches and this indicated that the predictions were accurate. Information on usage, properties and degradability was input to fate models to predict environmental concentrations (PECs) of valnemulin in soil, pore water and groundwater. Comparison of PECs with experimental and predicted ecotoxicity data for valnemulin indicated that that even under 'worst case' scenarios the environmental risk posed by valnemulin was low.     

A list of fish species that are potentially exposed to pesticides in edge-of-field water bodies in the European Union—a first step towards identifying vulnerable representatives for risk assessment

Surrogate species are used in standard toxicity tests for the environmental risk assessment of chemicals. Test results are then extrapolated to the situation in the field, which is often associated with a large degree of uncertainty. Since a vulnerable species in the field is not only characterised by its intrinsic sensitivity to a stressor but also by its potential for exposure and its population resilience, the identification of focal species based on these three components of vulnerability is needed for a more ecologically relevant risk assessment. This study listed European fish species that are susceptible to pesticide exposure in the field and thus achieved the first step towards identifying focal species for the risk assessment of pesticides for fish in Europe. A step-wise filtering approach was applied to list freshwater fish species that are native to Europe and widespread in the European Union, which inhabit streams, ditches or ponds in agricultural landscapes and therefore, are at an elevated risk of being exposed to pesticides. Out of the 579 fish species occurring in European freshwater, 27 species met the filtering criteria. The resulting list was verified based on monitoring studies that were conducted in agricultural landscapes over the past 20 years. Focal fish species that can be used for a more ecologically relevant environmental risk assessment of pesticides in Europe can be identified from the produced list of species by further assessing their ecological (life history and dispersal characteristics) and intrinsic sensitivities.     

An integrated approach to model the biomagnification of organic pollutants in aquatic food webs of the Yangtze Three Gorges Reservoir ecosystem using adapted pollution scenarios

The impounding of the Three Gorges Reservoir (TGR) at the Yangtze River caused large flooding of urban, industrial, and agricultural areas, and profound land use changes took place. Consequently, substantial amounts of organic and inorganic pollutants were released into the reservoir. Additionally, contaminants and nutrients are entering the reservoir by drift, drainage, and runoff from adjacent agricultural areas as well as from sewage of industry, aquacultures, and households. The main aim of the presented research project is a deeper understanding of the processes that determines the bioaccumulation and biomagnification of organic pollutants, i.e., mainly pesticides, in aquatic food webs under the newly developing conditions of the TGR. The project is part of the Yangtze-Hydro environmental program, financed by the German Ministry of Education and Science. In order to test combinations of environmental factors like nutrients and pollution, we use an integrated modeling approach to study the potential accumulation and biomagnification. We describe the integrative modeling approach and the consecutive adaption of the AQUATOX model, used as modeling framework for ecological risk assessment. As a starting point, pre-calibrated simulations were adapted to Yangtze-specific conditions (regionalization). Two exemplary food webs were developed by a thorough review of the pertinent literature. The first typical for the flowing conditions of the original Yangtze River and the Daning River near the city of Wushan, and the second for the stagnant reservoir characteristics of the aforementioned region that is marked by an intermediate between lake and large river communities of aquatic organisms. In close cooperation with German and Chinese partners of the Yangtze-Hydro Research Association, other site-specific parameters were estimated. The MINIBAT project contributed to the calibration of physicochemical and bathymetric parameters, and the TRANSMIC project delivered hydrodynamic models for water volume and flow velocity conditions. The research questions were firstly focused on the definition of scenarios that could depict representative situations regarding food webs, pollution, and flow conditions in the TGR. The food webs and the abiotic site conditions in the main study area near the city of Wushan that determine the environmental preconditions for the organisms were defined. In our conceptual approach, we used the pesticide propanil as a model substance.     

Selecting chemical substances for the UN-ECE POP protocol

In 1998 the UN-ECE POP Protocol was signed. Sixteen substances are included in the protocol. They can be characterised as persistent, bioaccumulating and toxic organic substances prone to long-range atmospheric transport. The Dutch Ministry of Housing, Physical Planning and the Environment started a project to select possible candidates for the protocol. In the first phase of the project possible candidates were selected using the so-called 'PTB-database' applying the criteria from the protocol. From the 12 substances that met the criteria four substances were selected for which preliminary risk profiles were drafted: polychlorinated naphthalenes, dicofol, hexachlorobutadiene and pentachlorobenzene. These profiles are presented. Revised profiles have to be prepared for the UN-ECE LRTAP Ad hoc Expert Group on persistent organic pollutants (POPs). Ultimately, the process should lead to a proposal to include additional POPs to the UN-ECE POP Protocol.     

Methyl tertiary hexyl ether and methyl tertiary octyl ether as gasoline oxygenates: assessing risks from atmospheric dispersion and deposition

Methyl tertiary hexyl ether (MtHxE) and methyl tertiary octyl ether (MtOcE) are currently being developed as replacement oxygenates for methyl tertiary butyl ether (MtBE) in gasoline. As was the case with MtBE, the introduction of these ethers into fuel supplies guarantees their introduction into the environment as well. In this study, a screening-level risk assessment was performed by comparing predicted environmental concentrations (PEC) of these ethers to concentrations that might cause adverse effects to humans or ecosystems. A simple box model that has successfully estimated urban air concentrations of MtBE was adapted to predict atmospheric concentrations of MtHxE and MtOcE. Expected atmospheric concentrations of these ethers were also estimated using the European Union System for the Evaluation of Substances (EUSES) multimedia fate model, which simultaneously calculates PECs in the various environmental compartments of air, water, soil, and sediment. Because little or no data are available on the physicochemical, environmental, and toxicological properties of MtHxE and MtOcE, estimation methods were used in conjunction with EUSES to predict both the PECs and the concentrations at which these ethers might pose a threat. The results suggest that these ethers would contaminate the air of a moderately sized U.S. city (Boston, MA) at levels similar to those found previously for MtBE. The risk assessment module in EUSES predicted risk characterization ratios of 10(-3) and 10(-2) for MtHxE and MtOcE, respectively, in Boston, and 10(-2) and 10(-1) in very large urban centers, suggesting that these ethers pose only a minimal threat to ecosystems at the anticipated environmental concentrations. The assessment also indicates that these compounds are possible human carcinogens and that they may be present in urban air at concentrations that pose an unacceptable cancer risk. Therefore, testing of the toxicological properties of these compounds is recommended before they replace MtBE in gasoline.     

Uncertainties and data needs in risk assessment of three commercial polybrominated diphenyl ethers: probabilistic exposure analysis and comparison with European Commission results

Some environmental monitoring programs have reported increasing levels of certain polybrominated diphenyl ether (PBDE) isomers in aquatic biota and in human breast milk. The commercial PBDE products are known as penta-, octa-, and deca-brominated diphenyl ethers (PeBDE, OBDE and DBDE, respectively). Aside from the current European Commission's risk assessment initiative and efforts underway in Sweden, Canada and elsewhere to evaluate environmental levels, little is understood about sources of exposure and risks to humans. In this study, a multi-pathway human health risk assessment was performed to predict theoretical chronic daily intakes (CDIs) of PeBDE, OBDE, and DBDE by five different age groups: 0-2, 2-6, 6-12, 12-18, and 18-70 years. Sources of exposure included air, drinking water, consumption of fish, vegetables, meat and dairy products, and ingestion of breast milk by infants. In addition to a deterministic analysis, the risk assessment included a probabilistic analysis to derive the probability density functions describing the range of plausible exposures associated with eight different pathways, as well as aggregate lifetime exposures for each age group. The results were compared to CDI point estimates calculated by the European Chemicals Bureau as part of the European Commission's Existing Substances Programme. The major sources of uncertainties are discussed, including environmental sources, levels in different environmental compartments, toxicity, and human exposure. This paper also discusses the limitations in the current state-of-the-science and provides recommendations for improving the scientific relevance and accuracy of future environmental risk assessments of PBDEs.     

Kinetic and dynamic aspects of soil-plant-snail transfer of cadmium in the field

The proper use of bioaccumulation in the assessment of environmental quality involves accounting for chemical fluxes in organisms. Cadmium (Cd) accumulation kinetics in a soil-plant-snail food chain were therefore investigated in the field under different soil contamination (from 0 to 40 mg kg(-1)), soil pH (6 and 7) and season. Allowing for an accurate and sensitive assessment of Cd transfer to snails, toxicokinetics appears an interesting tool in the improvement of risk assessment procedures and a way to quantify metal bioavailability for a defined target. On the basis of uptake fluxes, snails proved to be sensitive enough to distinguish moderate soil contaminations. The soil pH did not appear, in the range studied, as a modulating parameter of the Cd transfer from soil to snail whereas the season, by influencing the snail mass, may modify the internal concentrations. The present data specifying a time integrated assessment of environmental factors on metal bioavailability and transfer to terrestrial snails should ensure their rational use in environmental biomonitoring.     

Regulation (EC) No. 1107/2009 and upcoming challenges for exposure assessment of plant protection products--Harmonisation or national modelling approaches?

In the new European Pesticide Regulation (EC) No. 1107/2009, the harmonisation of approaches for estimation of the environmental exposure of pesticides is considered a major goal. Several member states currently require their own models for the calculation of predicted environmental concentrations (PEC) in surface water. The variety of methods makes risk evaluations rather time-consuming for both notifiers and evaluating authorities. In the present study we compare surface water concentrations of 19 compounds using EU and country-specific models and risk assessment approaches to evaluate to which extent the resulting estimated exposure concentrations differ. Our results show that EU and country specific approaches and the resulting surface water concentrations differ considerably regarding basic model assumptions and assessment methods. The results indicate that the aimed harmonisation of risk assessment approaches within the EU will be difficult based on current models. New scenarios may help to achieve a harmonisation taking country-specific features into account.     

Organizing For Risk Oriented Climate Alteration Research

The ubiquity in effects and complexity of modern environmental issues requires careful consideration of focused research to insure that answers to key policy oriented questions are obtained. Broad-based, unstructured research programs have proven to be inefficient instruments for characterizing risks from environmental stress. Both the expense and the importance of timeliness of information preclude a traditional “bottom-up” approach to research. Instead, a more “top-down” organized approach that links the natural and socioeconomic sciences has advantages to support environmental risk assessment and research prioritization of climate alteration. Early examples of analysis using an integrating framework for risk assessment focus on the need for research on human interactions and the environmental damage function in addition to the basic earth sciences. Nonlinearities in environmental impact of climate change, and uncertainties in the extent of growth of energy efficiencies, are seen to be key unknowns in the risk assessment of climate alternatives. To date, earth science research has not been structured well for environmental risk assessment of the climate change question. The U.S. national research program aimed at risk assessment of climate alteration is examined as an example. The examination suggests that the present conceptual plan falls short of an optimum structure derived from exploitation of an integrating framework, even though it is rich in scientific strength and diversity. To strengthen its public value and accessibility, the research program could account in its planning for prioritized needs defined by an integrating analysis for risk assessment and management.     

Including degradation products of persistent organic pollutants in a global multi-media box model

GOAL, SCOPE AND BACKGROUND: Global multi-media box models are used to calculate the fate of persistent organic chemicals in a global environment and assess long-range transport or arctic contamination. Currently, such models assume substances to degrade in one single step. In reality, however, intermediate degradation products are formed. If those degradation products have a high persistence, bioaccumulation potential and / or toxicity, they should be included in environmental fate models. The goal of this project was to gain an overview of the general importance of degradation products for environmental fate models, and to expand existing, exposure-based hazard indicators to take degradation products into account. METHODS: The environmental fate model CliMoChem was modified to simultaneously calculate a parent compound and several degradation products. The three established hazard indicators of persistence, spatial range and arctic contamination potential were extended to include degradation products. Five well-known pesticides were selected as example chemicals. For those substances, degradation pathways were calculated with CATABOL, and partition coefficients and half-lives were compiled from literature. RESULTS: Including degradation products yields a joint persistence value that is significantly higher than the persistence of the parent compound alone: in the case of heptachlor an increase of the persistence by a factor of 58 can be observed. For other substances, the increase is much smaller (4% for alpha-HCH). The spatial range and the arctic contamination potential (ACP) can increase significantly, too: for 2,4-D and heptachlor, an increase by a factor of 2.4 and 3.5 is seen for the spatial range. However, an important increase of the persistence does not always lead to a corresponding increase in the spatial range: the spatial range of aldrin increases by less than 50%, although the persistence increases by a factor of 20 if the degradation products are included in the assessment. Finally, the arctic contamination potential can increase by a factor of more than 100 in some cases. DISCUSSION: Influences of parent compounds and degradation products on persistence, spatial range and ACP are discussed. Joint persistence and joint ACP reflect similar characteristics of the total environmental exposure of a substance family (i.e., parent compound and all its degradation products). CONCLUSIONS: The present work emphasizes the importance of degradation products for exposure-based hazard indicators. It shows that the hazard of some substances is underestimated if the degradation products of these substances are not included in the assessment. The selected hazard indicators are useful to assess the importance of degradation products. RECOMMENDATIONS AND PERSPECTIVES: It is suggested that degradation products be included in hazard assessments to gain a more accurate insight into the environmental hazard of chemicals. The findings of this project could also be combined with information on the toxicity of degradation products. This would provide further insight into the importance of degradation products for environmental risk assessments.     

Inconsistency and comprehensiveness of risk assessments for heavy metals in urban surface sediments

Numerous indices have been developed to assess environmental risk of heavy metals in surface sediments, including the total content based geoaccumulation index (I_geo), exchangeable fraction based risk assessment code (RAC), and biological toxicity test based sediment quality guidelines (SQGs). In this study, the three indices were applied to freshwater surface sediments from 10 sections along an urbanization gradient of the Grand Canal, China to assess the environmental risks of heavy metals (Cu, Pb, Zn, Cd, and Cr) and to understand discrepancies of risk assessment indices and urbanization effects regarding heavy metal contamination. Results showed that Cd, Zn, and Pb were the most enriched metals in urban sections assessed by I_geo and over 95% of the samples exceeded the Zn and Pb thresholds of the effect range low (ERL) of SQGs. According to RAC, Cu, Zn, Cd, and Cr had high risks of adversely affecting the water quality of the Grand Canal due to their remarkable portions of exchangeable fraction in surface sediment. However, Pb showed a relative low risk, and was largely bounded to Fe/Mn oxides in the urban surface sediments. Obviously, the three assessment indices were not consistent with each other in terms of predicting environmental risks attributed to heavy metals in the freshwater surface sediments of this study. It is recommended that risk assessment by SQGs should be revised according to availability and site specificity. However, the combination of the three indices gave us a comprehensive understanding of heavy metal risks in the urban surface sediments of the Grand Canal.