Origin and consumption of mercury in small-scale gold mining

Mercury (Hg) is used by small-scale gold miners in more than 50 developing countries, where the accompanied releases affect human health and the environment. The objectives of this paper are to summarize present use of Hg in artisanal and small-scale mining (ASM) worldwide, reveal the origin of part of the Hg used by the gold miners, and propose appropriate actions to reduce the resulting Hg emissions. Significant releases of mercury are associated with inefficient amalgamation techniques. Releases are estimated to range from 800 to 1000 tonne/annum. Of this total, approximately 200–250 tonne of Hg are released in China, 100–150 tonne in Indonesia, and 10–30 tonne each in Bolivia, Brazil, Colombia, Peru, Philippines, Venezuela and Zimbabwe. Mercury usually enters these countries legally – typically imported from countries in the European Union – although in some cases and in some years (e.g., Indonesia, Venezuela, etc.), the reported imports of Hg are far below estimated consumption. Meanwhile, the EU, while gradually replacing Hg products and processes with more environmentally benign alternatives, paradoxically continues to produce virgin Hg at government-owned mines, further exacerbating a general global oversupply of Hg – evident from its historically low market price. Political leadership is needed to avoid the transfer of excess Hg, and related health and environmental risks from the EU to third countries. Otherwise, the present situation will continue or even worsen, with no oversight or control of the global Hg trade in which the transfer of excess EU Hg to artisanal miners is favoured by low Hg prices relative to gold prices.     

Characterizing the antibiotic resistance genes in a river catchment: Influence of anthropogenic activities

Previous studies on environmental antibiotics resistance genes(ARGs) have focused on the pollution sources such as wastewater treatment plants, aquaculture and livestock farms,etc. Few of them had addressed this issue in a regional scale such as river catchment. Hence,the occurrence and abundances of 23 ARGs were investigated in surface water samples collected from 38 sites which located from the river source to estuary of the Beijiang River.Among them, 11 ARGs were frequently detected in this region and 5 ARGs(sul I, sul II, tet B,tet C, and tet W) were selected for their distribution pattern analysis. The abundances of the selected ARGs were higher in the upstream(8.70 × 10~6 copies/ng DNA) and downstream areas(3.17 × 10~6 copies/ng DNA) than those in the midstream areas(1.23 × 10~6 copies/ng DNA), which was positively correlated to the population density and number of pollution sources. Pollution sources of ARGs along the Beijiang River not only had a great impact on the abundances and diversity, but also on the distribution of specific ARGs in the water samples. Both sul I and sul II were likely originated from aquaculture farms and animal farms,tet W gene was possibly associated with the mining/metal melting industry and the electric waste disposal and tet C gene was commonly found in the area with multiple pollution sources.However, the abundance of tet B was not particularly related to anthropogenic impacts. These findings highlight the influence of pollution sources and density of population on the distribution and dissemination of ARGs at a regional scale.     

Policies and regulations for Brazil’s artisanal gold mining sector: analysis and recommendations

In Brazil, artisanal and small-scale gold mining (ASGM) produces in the range of 6 tonnes of gold (Au) per annum, and employs approximately 200,000 people. Most of this mining activity is in the Amazon region, where miners have been extracting gold for more than 40 years. In the Tapajos River Basin, assessments indicate that around 99% of miners operate without the environmental and mining permits required by law. This is a result of a combination of unrealistic or lack of proper policies and regulations, lack of political will, lack of infra-structure to enforce the existing regulations and lack of incentives to miners to comply with legal requirements.In this article, we analyze a group of 20 laws, decrees and resolutions in Brazil, focusing on how idiosyncrasies in these regulations reveal gaps between policy and reality in ASGM areas. Artisanal miners operate in vast and remote areas and the government lacks the resources (personnel, vehicles, information and materials) to enforce the laws. Our analysis emphasizes the need for creating new government commitments and identifying priority areas where government agents can focus their efforts.There is no single solution for the environmental, health, technical and socio-economic problems associated with ASGM. However, a realistic approach should consider improving the level of education of miners, creating government programs to provide technical assistance in the field, simplifying administrative procedures and ensuring adequate measures for enforcement.     

Water quality management in the lower stretch of the river Ganges,east coast of India: an approach through environmental education

The lower tidal stretch of the river Ganges, known as Hugli (ca. 280 km), flows southward before entering the Bay of Bengal forming a vast mangrove-enriched estuarine delta called Sunderbans. Hugli estuary is a typical example of tide-dominated sink for contaminants from multifarious sources. This major important river is subjected to anthropogenic stress due to the socio-economic importance of these areas based on growth of industry, agriculture, aquaculture, port activities, fishing and tourism. The living resources have been degraded recently due to increases in population pressure, pollution and natural resource consumption to the extent of overexploitation. The present paper critically examines the physicochemical characteristics and level of dissolved heavy metals at three ecologically distinct zones along the course of the river – Babughat located in the eastern part of the metropolitan megacity Calcutta (140 km upstream from seaface), Diamond Harbor (70 km upstream from sea face) and Gangasagar positioned at the mouth of the Ganges estuary.Physicochemical characteristics of this partially mixed estuary are largely influenced by the interaction of seawater and discharge of riverine freshwater, annual precipitation and surface runoff. The levels of salinity, total dissolved solids, hardness and conductivity showed an increasing downward trend. Marked increase in biochemical oxygen demand (BOD) values (2.20–5.95 mg/l) was recorded in Babughat whereas correspondingly low values (0.75–2.82 mg/l) were noticed at Gangasagar. This can be attributed mainly due to huge organic load of untreated sewage from the twin city Howrah and Calcutta situated in the east and west of the river. Spatiotemporal distribution of heavy metals reveals a wide range of variations reflecting input of huge anthropogenic inputs associated with a number of physical and chemical processes. Levels of metals registered a seasonal pattern, with an increase during late monsoon months (September–October), a period characterized by low salinity and relatively low pH of the water. Elevated levels of dissolved Hg and Pb were also recorded in Babughat, with values ranging from 0.16 to 0.95 μg/ml and 0.017 to 0.076 μg/ml, respectively, this high values for Hg can be attributed to the discharge from pulp and paper manufacturing units and to atmospheric input and runoff of automobile emission for Pb.It was revealed that the socio-economic development of Calcutta, the most potential economic zone in India situated on the east bank of Hugli river, has had a significant impact on the water quality of this major river. The deterioration of water quality is directly related to nonfunctioning and malfunctioning of wastewater treatment plants and lack of environmental planning and coordination. To restore the ecological stability and economic vitality of this river, the following measures have been suggested: (i) strong vigilance programme is to be undertaken towards installation and maintenance of the wastewater treatment plants to check the flow of persistent contaminants in the river water and (ii) execution of legislation and mass awareness programmes are to be enacted to restore the sound health of the river. The authors urge that environmental education should be used as an effective tool for water resource management dealing with intricate and complex problems in the interaction between nature, technology and human beings.     

Mill leaching: a viable substitute for mercury amalgamation in the artisanal gold mining sector?

Artisanal small-scale gold miners (ASM) occasionally employ whole ore amalgamation by adding mercury into ball mills to recover gold. In this process, 25–30% of the mercury added is lost to the environment. It is also inefficient less than 30% of gold is recovered. Amalgamation, followed by cyanidation, has been observed at many artisanal mining sites. This combination poses additional environmental and health consequences. Tests with ore samples from Talawaan, North Sulawesi, Indonesia indicate the possibility of replacing mercury by cyanidation in the ball mill, reaching gold extraction of 93% in 6 h of leaching. The gold in the Indonesian ore sample is fine and less than 8% of gold recovery was obtained with gravity concentration of the ore ground 80% below 0.25 mm, which is a reasonably fine grain size for artisanal gold operations. Replacing mercury addition with cyanidation in ball mills was implemented in one artisanal gold mining operation in Portovelo, Ecuador, achieving 95% of gold extraction in 8 h of mill leaching. This technique demonstrated a drastic improvement in gold recovery. It was found to be a simple, inexpensive technique well accepted by local miners. The results from laboratory and field tests are promising; however a thorough investigation into the socio-economic and environmental aspects of this presented alternative must be conducted prior to introduction.     

Headwater streams: neglected ecosystems in the EU Water Framework Directive. Implications for nitrogen pollution control

The European Union Water Framework Directive (WFD) aims to achieve the “good status” of waters by 2015, through monitoring and control of human impacts on “bodies of surface water” (BSWs), discrete elements for quality diagnosis and management. Headwater streams, however, are frequently neglected as they are not usually recognised as BSW. This poses limitations for the management of river catchments, because anthropogenic impacts on headwaters can constrain the quality of downstream rivers. To illustrate this problem, we compared nitrate levels and land use pressures in a small agricultural catchment with those recorded in the catchment in which it is embedded (Ega), and in the Ebro River Basin (NE Spain) comprising both. Agriculture greatly influenced water nitrate concentration, regardless of the size of the catchments: R² = 0.91 for headwater catchments (0.1–7.3 km²), and R² = 0.82 for Ebro tributary catchments (223–3113 km²). Moreover, nitrate concentration in the outlet of a non-BSW small river catchment was similar to that of the greater downstream BSW rivers. These results are of interest since, despite representing 76% of the length of the Ega catchment hydrographical network, only 3.1% of the length of the headwater streams has been identified as BSWs. Human activities affecting headwater streams should therefore be considered if the 2015 objective of the WFD is to be achieved.     

长江-洪泽湖段突发跨界污染风险交流信息图谱研究

在分析我国当前环境风险交流存在问题基础上,将信息图谱引入到流域突发跨界环境污染风险交流中.参考公共卫生领域信息图谱制定步骤,结合突发跨界环境污染风险管理特点与要求,构建流域突发跨界环境污染利益相关方构架体系.编制流域突发跨界环境污染事件利益相关方问题清单框架,对流域突发跨界环境污染利益相关方问题计算权重,按权重大小进行排序分类.以南水北调东线工程长江-洪泽湖段为研究区域,绘制风险交流信息图谱,利用ArcGIS制作信息图谱单元图以及单元表实现对海量信息资料的挖掘、提炼与表达,不仅满足了利益相关方对于信息的迫切需求,提高了环境风险交流效率,保证了突发跨界环境污染应急处理处置措施的有力实施.同时也为利益相关方进行有效的风险沟通提供了预见性、准确的关键信息与支持信息,为流域突发跨界环境污染风险决策提供辅助信息工具.     

Clean artisanal gold mining: a utopian approach?

Artisanal and small-scale mining (ASM) provides an important source of livelihood for rural communities throughout the world. These activities are frequently accompanied by extensive environmental degradation and deplorable socio-economic conditions, both during operations and well after mining activities have ceased. As gold is easily sold and not influenced by the instability of local governments, it is the main mineral extracted by artisanal miners. Mercury (Hg) amalgamation is the preferred gold recovery method employed by artisanal gold miners and its misuse can result in serious health hazards for miners involved in gold extraction, as well as for surrounding community inhabitants, who may be exposed to mercury via the food chain. The rudimentary techniques characteristic of ASM result in a number of occupational hazards, other although most risks are primarily attributed to machinery accidents and ground failure, such as landslides and shaft collapses.Several technologies and methods commonly utilized by large-scale mining operations can be downsized to smaller scale operations. However, the likelihood that miners will adopt these large-scale methods, or those developed specifically for ASM, depends upon some key factors. For an artisanal miner, these factors include: (1) increased or comparable simplicity, (2) quick recovery of the economic mineral, and (3) demonstrated financial gain. Other practical aspects, such as the availability of materials (chemicals, steel rods, piping, generators, etc), capital and operating cost requirements and access to technical support, also influence acceptance of new techniques.This article will review four inter-related areas: first, the limitations and benefits, for ASM, of a number of specific technologies; second, the role of Processing Centers in education, information dissemination and provision of “clean” services; third, benefits and challenges associated with formalization of ASM activities; and fourth, the contribution of ASM to the development of sustainability of communities, primarily through diversification of livelihoods. The appropriate application of technologies, particularly given the diversity of ASM communities around the world, will also be explored.     

Environmental consequences of different beef production systems in the EU

The aim of this paper is to examine the environmental consequences of beef meat production in the EU, using a life cycle approach. Four beef production systems were studied – three from intensively reared dairy calves and one from suckler herds. According to the results of the analysis, the contributions from the production of 1 kg beef meat (slaughter weight) to global warming, acidification, eutrophication, land use and non-renewable energy use were lower for beef from dairy calves than from suckler herds (16.0–19.9 versus 27.3 kg CO₂e, 101–173 versus 210 g SO₂e, 622–1140 versus 1651 g NO₃e, 16.5–22.7 versus 42.9 m²year, and 41.3–48.2 versus 59.2 MJ, respectively). The breakdown analysis helped identify the key areas in the “cradle to farm gate” beef production system where sustainable management strategies are needed to improve environmental performance. The study also included a sensitivity analysis to preliminarily estimate GHG emissions from beef production systems if land opportunity cost and land use change related to grazing and feed crop production for beef were taken into account. If so, the contribution from the production of 1 kg beef to global warming would increase by a factor of 3.1–3.9, based on a depreciation period of 20 years. This highlights the importance of taking into account the impacts of land use in assessing the environmental impacts of livestock production.     

Mercury-free gold mining technologies: possibilities for adoption in the Guianas

The rudimentary nature of small-scale gold mining activities often generates a legacy of extensive degradation and deplorable social conditions, both during and after activities have ceased. Small-scale mining usually involves the extraction of secondary gold from placer deposits (alluvial, colluvial or elluvial), which can be liberated and treated using gravity methods. In the Guianas, the most popular form of small-scale gold mining is referred to as “land dredging”, a combination of hydraulicking and suction dredging. This method requires application of large volumes of water for both mining and mineral processing; in most cases, there are no containment structures for the waste tailings generated. Mercury, a dangerous pollutant, is the preferred method employed by small-scale miners for gold recovery. Gold extraction using mercury is comprised of the following four stages: (1) amalgamation, (2) separation of amalgamation, (3) removal of excess mercury, and (4) burning of the remaining amalgam to produce a gold sponge. Mercury can be released into the environment at each stage, which makes the promotion of mercury-free alternatives imperative.Technical alternatives for small-scale gold mining, however, must be thoroughly evaluated, pre-tested, modified accordingly and successfully transferred. Moreover, technology must be inexpensive, relatively simple and easy to adapt, while allowing a rapid rate of return. WWF-Guianas is working with the regulatory agencies and other relevant stakeholders of the Guianas to reduce the environmental footprints caused by small-scale mining. The major aspects of this program are to develop the capacity and regulatory mechanisms within the local government, to promote mercury-free technology, and monitor mercury in the environment. This paper reviews the alternative technologies being investigated by the WWF-Guianas for use in the small-scale gold mining industry.     

Utilisation of phosphorus nutrient content in industrial scale plasmid DNA production: a waste minimisation study

Human gene therapy is currently seeing an increase in the use of plasmid (pDNA)-based vectors as a preferred choice of vehicle for delivery of the therapeutic gene into the body. In this regard, the environmental impacts of the waste streams from the possible industrial scale manufacture of pDNA require more detailed assessment. In this study, an initial assessment was made of the nutrient phosphorus (P) inputs to four fermentation processes recommended for the industrial scale production of pDNA for the purposes of gene therapy. Phosphorus inputs to each of the four selected fermentation processes ranged from approximately 60 mg l^?1 up to 3000 mg l^?1 in the fresh media. However, the spent media waste from each of the processes exhibited only a minor reduction in the phosphorus concentrations indicating minimal uptake of P by the microorganisms. This unutilised excess level of phosphorus nutrient within the waste streams poses a strong potential for environmental impact. Waste minimisation studies were undertaken on one model fermentation process with the aim of reducing unnecessary phosphorus input. An optimised media containing a 98% reduction in added P to the media was developed. This phosphorus-minimised media had little quantitative effect upon cell biomass produced and no effect upon the quantity or quality of pDNA produced, relative to the control media. The reduction in P requirement results in an overall cost savings of 12% per fermentation batch, would simplify subsequent wastewater treatment and would contribute to slowing the depletion rate of a valuable, finite natural resource.     

A simplified matrix of environmental impacts to support an intervention program in a small-scale mining site

This paper describes a tool developed to evaluate environmental risks at a Brazilian artisanal small-scale gold mining site. The tool consists of a matrix used to determine the relevance of such risks through the classification of mining activities according to the likelihood that they may cause environmental impacts. The language and method are very simple, and thus appropriate for local stakeholders. It ensures their participation when developing a plan of action for intervention and training. When applied to a pilot site in the Brazilian Amazon, the matrix revealed the variables that pose higher environmental risks. These activities were subsequently addressed in a training program to promote better practices. As a result, the mining activities were improved by 28.8% when comparing compliance to environmental requisites before and after the training program. Specifically, the training program resulted in improved gold recovery, and reduced environmental and health impacts.     

太浦河开通对上海市水环境的影响

在全面摸清太浦河开通前后黄浦江上游工况、水量、水质、污染物变化的基础上,采用大范围产水、河网水流运动和小范围水质动态模拟的方法,开展多方案的水环境变化研究,揭示上海市主要水源地黄浦江上游水环境的变化规律,综合分析太浦河开通的有利和不利影响,提出污染物削减方案,并优选合理的防治措施,避免不利影响,从而更好地发挥太浦河工程的综合效益。      

Use of life cycle assessment methodology for determining phytoremediation potentials of maize-based cropping systems in fields with nitrogen fertilizer over-dose

Using the life cycle assessment (LCA) method, we analyzed the effects of different cropping systems (sole maize (CK), maize + soybean (CST) and maize + groundnut (CGT)) on the environment. The comprehensive index of environmental impacts varied in the order, sole maize > maize + groundnut > maize + soybean, with corresponding intercropping values of 0.1295, 0.1229 and 0.0945, respectively. The results showed that intercropping maize with suitable plants (e.g., groundnut and soybean) could reduce the adverse effects of over-application of nitrogen fertilizer on the environment. The study further showed that the LCA method may be a convenient and effective approach for analyzing the environmental impact of fertilizer management in agricultural fields.     

Material flows in the life cycle of leather

This paper presents a study on the resource and environmental profile of leather for communicating to the consumers about the environmental burdens of leather products. The results indicate that significant environmental impacts were caused during the tanning and finishing of leather as well as the electricity production and transportation required in the life cycle. The use of fossil fuels in the production of energy has greater impact with increased emissions leading to about 15190 kg CO₂ equivalent of global warming and about 73 kg SO₂ equivalent of acidification while producing 100 m² of leather for shoe uppers. Further resource use of 174 kg of coal, 6.5 kg of fuel oil, 17.4 m³ of water and 348 kg of chemicals of which about 204 kg are hazardous are consumed, and wastewater of about 17 m³, BOD of 55 kg, COD of about 146 kg, TDS of 732 kg and solid waste of about 1445 kg are generated during the life cycle for the production of 100 m² of leather. The total solid waste generated is 1317 kg, out of which about 80% is biodegradable contributed by slaughtering, tanning and finishing stage, 14% is non-biodegradable contributed by tanning, finishing and electricity production stages and 6% is hazardous mainly from tanning and finishing stage of leather.     

Reducing mercury pollution from artisanal gold mining in Munhena,Mozambique

Artisanal small-scale mining (ASM) is responsible for over 90% of gold production in Mozambique. In 2005, a 15-day pilot training project was held in the village of Munhena, a gold mining community. This intervention aimed at raising awareness related to the environmental and health impacts of mercury amalgamation and introduced alternative practices to reduce mercury release and exposure. In 2007, a 9-day evaluation of the pilot campaign was accomplished and knowledge in regards to mining methods, and the ASM government–community operating relations in Munhena were updated. Miners in Munhena are organized in an association of over 3000 members, work on a 25 year Government granted 143 ha concession and generate a substantial income (producing over 5 kg of gold per month). There remain, however, serious barriers towards sustainable community development. ASM associated environmental and health costs are high, as mercury continues to be used and lost to the environment, and cyanide will be introduced soon. The Government of Mozambique has laid the foundation for supporting this sector; however, resources are limited, and thus restrict ability to fully address these issues. Importantly, malaria and HIV/AIDS are not diagnosed and/or treated effectively within the community, and basic necessities are absent. This paper concludes with recommendations focused on enhancing the ASM sector in Mozambique, and overcoming barriers to sustainability in the community of Munhena.     

Integrated environmental assessment of biodiesel production from soybean in Brazil

This paper presents the results of an environmental impact assessment of biodiesel production from soybean in Brazil. In order to achieve this objective, environmental impact indicators provided by Emergy Accounting (EA), Embodied Energy Analysis (EEA) and Material Flow Accounting (MFA) were used. The results showed that for one liter of biodiesel 8.8 kg of topsoil are lost in erosion, besides the cost of 0.2 kg of fertilizers, about 5.2 m² of crop area, 7.33 kg of abiotic materials, 9.0 tons of water and 0.66 kg of air and about 0.86 kg of CO₂ were released. About 0.27 kg of crude oil equivalent is required as inputs to produce one liter of biodiesel, which means an energy return of 2.48 J of biodiesel per Joule of fossil fuel invested. The transformity of biodiesel (3.90E + 05 seJ J^?1) is higher than those calculated for fossil fuels as other biofuels, indicating a higher demand for direct and indirect environmental support. Similarly, the biodiesel emergy yield ratio (1.62) indicates that a very low net emergy is delivered to consumers, compared to alternatives. Obtained results show that when crop production and industrial conversion to fuel are supported by fossil fuels in the form of chemicals, goods, and process energy, the fraction of fuel that can actually be considered renewable is very low (around 31%).     

Pollution minimisation practices in the Australian mining and mineral processing industries

Research was conducted to identify some of the current pollution minimisation practices adopted in Australia's mining and mineral processing industries. Initially, 84 mining and mineral processing companies were approached for inclusion in the study, with request only made for information that was available to the company stakeholders and the wider general community. Among the responses received, BHP Billiton, BlueScope Steel, Newmont Australia Limited and AngloGold Australia provided the information requested and/or a substantial quantity of information through reports on their company website. Analysis of the data collected for these companies indicated that improvements were made, and that policies had been implemented over the previous few years. The pollution minimisation and policy practices adopted at the operations of these companies include environmental management systems, advanced pollution control technologies, environmental awareness training for employees, and requirement – from company stakeholders – for increased accountability of environmental impacts.     

The transport of Cu and Zn from agricultural soils to surface water in a small catchment

Long-term manure-borne copper and zinc inputs (18–324 mg Cu m⁻² yr⁻¹ and 100–800 mg Zn m⁻² yr⁻¹) to grassland soils resulted in their catchment in water concentrations that often exceeded the surface water quality criteria (2 μg Cu l⁻¹ and 5 μg Zn l⁻¹). This paper compares retention and release of Cu and Zn by two types of soil, a mineral soil (MS) and a dark colored soil rich in organic matter (OS). On the basis of dry soil mass, the OS has a higher retention/affinity for Cu and Zn than the MS, but much less Zn accumulated in the MS when compared on an areal basis. This is largely because of the much smaller bulk OS density and larger dissolved metal concentrations in the OS drainage than that for the MS. However, because of the greater water retention capacity of the OS, elevated metal concentrations in the soil solution do not necessarily cause greater loss to water. It is concluded that artificially drained OS can contribute significantly to the observed elevated Cu and Zn concentrations of the river, especially during relatively dry weather conditions when the contribution of water seeping from OS to the total river water discharge becomes increasingly important.     

Efficiency of bait usage in the Nova Scotia lobster fishery: a first look

In studies of commercial fishing, little attention has been paid to the use of bait. We examined lobster fishery bait-to-catch ratios in St. Margaret's Bay and Mahone Bay, Nova Scotia. Data were obtained from the Fishermen and Scientists Research Society's Lobster Recruitment Project. Local ecological knowledge of the resource users from within the study area was also gathered using semi-structured interviews. The estimated amount of bait required to catch each lobster, weighing about 480 g, ranged from 185 g (November) to 1455 g (April) for average months during the 2002/3, 2003/4 and 2004/5 fishing seasons. We estimated the overall ratio of bait-to-catch to be about 1.9 units of bait per unit of catch. The eco-efficiency and food-supply implications of consuming more bait than product in a fishery are outlined.