Present status of recycling waste mobile phones in China: a review

A large number of waste mobile phones have already been generated and are being generated. Various countries around the world have all been positively exploring the way of recycling and reuse when facing such a large amount of waste mobile phones. In some countries, processing waste mobile phones has been forming a complete industrial chain, which can not only recycle waste mobile phones to reduce their negative influence on the environment but also turn waste into treasure to acquire economic benefits dramatically. However, the situation of recycling waste mobile phones in China is not going well. Waste mobile phones are not formally covered by existing regulations and policies for the waste electric and electronic equipment in China. In order to explore an appropriate system to recover waste mobile phones, the mobile phone production and the amount of waste mobile phones are introduced in this paper, and status of waste mobile phones recycling is described; then, the disposal technology of electronic waste that would be most likely to be used for processing of electronic waste in industrial applications in the near future is reviewed. Finally, rationalization proposals are put forward based on the current recovery status of waste mobile phones for the purpose of promoting the development of recycling waste mobile phones in developing countries with a special emphasis on China.     

Antimony in municipal waste.

Antimony content in municipal waste was studied. Sampled municipal waste was dried, crushed and analyzed. Antimony determinations were performed by Kjeldahl decomposition--batch hydride generation spectrometry and neutron activation analysis. Overall content of antimony in waste was 40-50 g/t raw waste. It was estimated than 20% of the annual production of antimony was discarded as municipal waste in Japan. Leaching of antimony from antimony-added materials may occur, because "small tips" involved considerable amounts of antimony.     

浅析某厂化学镀镍线的主要污染物及处理措施

某厂化学镀镍线产生的主要污染物为大气污染、水污染和固体废物污染。其中大气污染物主要为硫酸雾。水污染物为总镍、总铜、化学需氧量、悬浮物、总磷、氨氮等。固废废弃物均为危险废物,包括废包装材料、酸性废液、含镍废液。该文分析了化学镀镍线产生的废气、废水和固体废物的主要来源,并提出了防止污染的对策。     

Characterization of municipal waste in Kampala,Uganda

In Kampala, Uganda, about 28,000 tons of waste is collected and delivered to a landfill every month. Kampala Capital City Authority (KCCA) records show that this represents approximately 40% of the waste generated in the city. The remaining uncollected waste is normally dumped in unauthorized sites, causing health and environmental problems. However, the organic fraction of domestic waste can provide an opportunity to improve livelihoods and incomes through fertilizer and energy production. This study characterized the municipal waste generated in Kampala and delivered to Kiteezi landfill between July 2011 and June 2012, that is, covering the dry and wet months. On each sampling day, waste was randomly selected from five trucks, sorted and weighed into different physical fractions. Samples of the organic waste from each truck were analyzed for total solids, major nutrients, and energy content. During the wet months, the waste consisted of 88.5% organics, 3.8% soft plastics, 2.8% hard plastics, 2.2% paper, 0.9% glass, 0.7% textiles and leather, 0.2% metals, and 1.0% others. During the dry months, the waste consisted of 94.8% organics, 2.4% soft plastics, 1.0% hard plastics, 0.7% papers, 0.3% glass, 0.3% textile and leather, 0.1% metals, and 0.3% others. The organic waste on average had a moisture content of 71.1% and contained 1.89% nitrogen, 0.27% phosphorus, and 1.95% potassium. The waste had an average gross energy content of 17.3 MJ/kg. It was concluded that the organic waste generated can be a suitable source of some plant nutrients that are useful especially in urban agriculture.

Implications:?The result of the waste characterization in Kampala was found to be significantly different from that obtained for other Sub-Saharan African (SSA) cities, showing that studies assuming average values for the waste fractions are likely to result in erroneous results. Furthermore, no reduction in organic fraction of the waste was noticed when compared with a study done two decades ago in spite of greatly improved economic status of Kampala city, a finding that is not in agreement with several other similar studies done for other SSA cities.     

Public Policy impacts on the Generation and Disposal of Hazardous Waste in New York State

A number of policies adopted by the federal government and the states have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects.

Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to “higher” waste handling technologies in response to several policy interventions.     

Air Pollution in the Republic of Korea

This paper discusses the potential for using commercially available treatment techniques to remove VOCs from hazardous waste streams and addresses some of the issues associated with making waste treatment a viable VOC emission control technique for hazardous waste management facilities. It discusses the waste streams of concern because of their volatile constituents and describes potentially applicable treatment techniques. The use of models for treatment process design is described. Finally, the paper discusses treatment cost, treatment residuals, and considerations of importance in choosing where in the life cycle of a hazardous waste stream to treat it.     

Hazardous waste disposal in Germany: a case study of the site in Billigheim, Baden-Wurttemberg

The disposal of hazardous waste is a very critical issue. It is associated with many risks. Efforts are made to minimise these by consistent legislation and by proper treatment of the waste. The goal of a hazardous waste disposal site, as described in this paper, is to ensure that hazardous waste is treated and disposed of in a way that does not harm human beings or the environment. To assure this it is necessary to observe the handling of the hazardous waste from its producer up to the disposal site, and to identify possible inherent risks.     

Solid Waste Disposal in the Netherlands

In The Netherlands, a small and densely populated country, the disposal of solid waste requires strict precautions. Because the landscape is flat and the watertable just under groundlevel, landfilling and dumping must be avoided as much as possible. Incineration of municipal and industrial waste are presently under consideration. But even when excellent flue gas cleaning systems are used, air pollution can present a problem, for instance, by dioxines produced during the process. For these reasons the government has published a waste disposal policy plan in which recycling, composting and prevention of waste production play a major role. Eventually about one third of the solid waste production will be incinerated or dumped. No solid waste will be exported.     

Public policy impacts on the generation and disposal of hazardous waste in New York State

A number of policies adopted by the federal government and the state have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects. Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to "higher" waste handling technologies in response to several policy interventions.     

Hazardous Waste Minimization: Part VI Waste Minimization in the Foundry Industry

The foundry industry is a major consumer of waste materials (scrap). Unfortunately, the recycling of these waste materials can result in the generation of hazardous wastes that must be properly managed at a significant cost. This article focuses on two waste streams in the foundry industry; calcium carbide desulfurization slag and melt emission control residuals. The author presents an overview of how foundries have evaluated different waste management options with the ultimate goal of minimizing the generation of hazardous waste.     

Characteristics and management modes of domestic waste in rural areas of developing countries: a case study of China

A huge accumulation of domestic waste has caused serious environmental contamination in rural areas of developing countries (RADIC). The characteristics and management of domestic waste are carefully discussed, based on field surveys and a literature review. The results indicate that the generation in most of RADIC is less than the median of 0.521 kg day⁻¹ per capita in China, and much smaller than in rural areas of developed countries (RADEC). Organic waste and inert waste with an accumulative mass percentage of 72.31% are dominant components of domestic waste in the rural areas of China. There are trends of increasing amounts of kitchen waste, paper/cardboard, and plastic/rubber and a decreasing trend of ash waste. The RADIC composition of domestic waste had a high content of organic waste and a low content of recyclable waste compared to the RADEC. Domestic waste has good compressibility and a light bulk density ranging from 40 to 650 kg m⁻³. The moisture, ash, combustible, and calorific values of domestic waste were 53.31%, 18.03%, 28.67%, and 5368 kJ kg⁻¹, respectively. The domestic waste has an abundance of nutrients including organic matter (39.05%), nitrogen (1.02%), phosphorus (0.50%), and potassium (1.42%). In RADIC, domestic waste can be used as an agricultural manure only after it has been collected and sorted for the potential risk of heavy metal accumulation. Based on these characteristics of domestic waste and the different situations of rural areas, four waste management modes including centralized treatment, decentralized treatment, group treatment, and mobile treatment are designed and discussed.

     

Food waste collection and recycling for value-added products: potential applications and challenges in Hong Kong

About 3600 tonnes food waste are discarded in the landfills in Hong Kong daily. It is expected that the three strategic landfills in Hong Kong will be exhausted by 2020. In consideration of the food waste management environment and community needs in Hong Kong, as well as with reference to the food waste management systems in cities such as Linköping in Sweden and Oslo in Norway, a framework of food waste separation, collection, and recycling for food waste valorization is proposed in this paper. Food waste can be packed in an optic bag (i.e., a bag in green color), while the residual municipal solid waste (MSW) can be packed in a common plastic bag. All the wastes are then sent to the refuse transfer stations, in which food waste is separated from the residual MSW using an optic sensor. On the one hand, the sorted food waste can be converted into valuable materials (e.g., compost, swine feed, fish feed). On the other hand, the sorted food waste can be sent to the proposed Organic Waste Treatment Facilities and sewage treatment works for producing biogas. The biogas can be recovered to produce electricity and city gas (i.e., heating fuel for cooking purpose). Due to the challenges faced by the value-added products in Hong Kong, the biogas is recommended to be upgraded as a biogas fuel for vehicle use. Hopefully, the proposed framework will provide a simple and effective approach to food waste separation at source and promote sustainable use of waste to resource in Hong Kong.     

Polymers as Solid Waste in Municipal Landfills

Abstract

Synthetic polymers reach municipal landfills as components of products such as waste household paints, packaging films, storage containers, carpet fibers, and absorbent sanitary products. Some polymers in consumer products that reach landfills are designed to photodegrade or biodegrade. This article examines the significance of degradable polymers in management of solid waste in municipal landfills. Most landfills are not designed to photodegrade or biodegrade solid waste. Landfill disposal of stable polymers such as polyacrylics and polyethylenes is not associated with significant polymer degradation or mobility. Stability to photodegradation and biodegradation is an advantage when municipal landfills are used for disposal of polymer products as solid waste. Use of landfill disposal can be a responsible means to manage polymer waste and can be part of an overall waste management plan which includes source reduction, recycling, reuse, composting, and waste-to-energy incineration.     

Concept of sustainable waste management in the city of Zagreb: Towards the implementation of circular economy approach

Improvement of the current waste management is one of the main challenges for most municipalities in Croatia, mainly due to legal obligations set in different European Union (EU) directives regarding waste management, such as reduction of waste generation and landfilling, or increase of separately collected waste and recycling rates. This paper highlights the current waste management in the city of Zagreb by analyzing the waste generation, collection, and disposal scenario along with the regulatory and institutional framework. Since the present waste management system mainly depends upon landfilling, with the rate of separate waste collection and recycling far from being adequate, it is necessary to introduce a new system that will take into account the current situation in the city as well as the obligations imposed by the EU. Namely, in the coming years, the Waste Framework and Landfill Directives of the European Union will be a significant driver of change in waste management practices and governance of the city of Zagreb. At present, the yearly separate waste collection makes somewhat less than 5 kg per capita of various waste fractions, i.e., far below the average value for the (28) capital cities of the EU, which is 108 kg per capita. This is possible to achieve only by better and sustainable planning of future activities and facilities, taking into account of environmental, economic, and social aspects of waste management. This means that the city of Zagreb not only will have to invest in new infrastructure to meet the targets, but also will have to enhance public awareness in diverting this waste at the household level. The solution for the new waste management proposed in this paper will certainly be a way of implementing circular economy approach to current waste management practice in the city of Zagreb.

Implications: Municipal waste management in the developing countries in the EU (new eastern EU members) is often characterized by its limited utilization of recycling activities, inadequate management of nonindustrial hazardous waste, and inadequate landfill disposal. Many cities in Eastern Europe and Zagreb as well are facing serious problems in managing municipal wastes due to the existing solid waste management system that is found to be highly inefficient. The proposed scenario for city of Zagreb in the paper is an innovative upgrading of municipal waste management based on the waste management hierarchy and circular economy approach.     

Generation and management of waste electric vehicle batteries in China

With the increasing adoption of EVs (electric vehicles), a large number of waste EV LIBs (electric vehicle lithium-ion batteries) were generated in China. Statistics showed generation of waste EV LIBs in 2016 reached approximately 10,000 tons, and the amount of them would be growing rapidly in the future. In view of the deleterious effects of waste EV LIBs on the environment and the valuable energy storage capacity or materials that can be reused in them, China has started emphasizing the management, reuse, and recycling of them. This paper presented the generation trend of waste EV LIBs and focused on interrelated management development and experience in China. Based on the situation of waste EV LIBs management in China, existing problems were analyzed and summarized. Some recommendations were made for decision-making organs to use as valuable references to improve the management of waste EV LIBs and promote the sustainable development of EVs.     

浅谈无锡市危险废物产生情况与处置现状

无锡市作为江苏重点发展的城市,随着社会和经济的快速发展,危险废物产生量和种类不断增多。文中针对无锡市2011年—2018年危险废物产生量、综合利用与处置情况,分析危险废物处置利用存在的问题,同时,就目前危险废物存在的问题,提出科学合理的建议。     

Medical Waste Treatment and Disposal Methods Used by Hospitals in Oregon,Washington, and Idaho

ABSTRACT

This study investigated medical waste practices used by hospitals in Oregon, Washington, and Idaho, which includes the majority of hospitals in the U.S. Environmental Protection Agency's (EPA) Region 10. During the fall of 1993, 225 hospitals were surveyed with a response rate of 72.5%. The results reported here focus on infectious waste segregation practices, medical waste treatment and disposal practices, and the operating status of hospital incinerators in these three states. Hospitals were provided a definition of medical waste in the survey, but were queried about how they define infectious waste. The results implied that there was no consensus about which agency or organization's definition of infectious waste should be used in their waste management programs. Confusion around the definition of infectious waste may also have contributed to the finding that almost half of the hospitals are not segregating infectious waste from other medical waste. The most frequently used practice of treating and disposing of medical waste was the use of private haulers that transport medical waste to treatment facilities (61.5%). The next most frequently reported techniques were pouring into municipal sewage (46.6%), depositing in landfills (41.6%), and autoclaving (32.3%). Other methods adopted by hospitals included Electro-Thermal-Deac-tivation (ETD), hydropulping, microwaving, and grinding before pouring into the municipal sewer. Hospitals were asked to identify all methods they used in the treatment and disposal of medical waste. Percentages, therefore, add up to greater than 100% because the majority chose more than one method. Hospitals in Oregon and Washington used microwaving and ETD methods to treat medical waste, while those in Idaho did not. No hospitals in any of the states reported using irradiation as a treatment technique. Most hospitals in Oregon and Washington no longer operate their incinerators due to more stringent regulations regarding air pollution emissions. Hospitals in Idaho, however, were still operating incinerators in the absence of state regulations specific to these types of facilities.     

化工园区废气管理问题及对策

近年来,化工园区面临绿色转型升级,废气管理提升重要程度日益突显。本文分析了化工园区废气管理存在的主要问题,并提出了化工园区废气管理对策,以期提升化工园区废气综合管理水平,改善化工园区空气环境质量。     

A Survey of Graduate Education in Hazardous Waste Management

A brief, informal survey questionnaire was sent to 69 universities in the U.S. Forty-two schools responded. Of the 42 respondents, 30 offered one or more courses in hazardous waste management. The average number of courses offered was 1.76 at an average frequency of once per year. Approximately 400 students take the hazardous waste management courses each year. Only four schools provided explicit laboratory training in hazardous waste analysis/treatment. Sixty-nine percent of the respondents have a research program in hazardous waste management. Typical course outlines are presented. Equipment needs for a hazardous waste laboratory are suggested.     

Economic insight into municipal solid waste management in Mumbai: a critical analysis

Mumbai generates 6256 tonnes of waste every day, of which 17.20% is recyclable, but only a fraction of this is retrieved by rag-pickers. The economic value of the retrieved material is not considered by the Municipal Corporation of Greater Mumbai in valuing the waste management system as there is no retrieval mechanism except the informal rag-picking activity. Moreover, the cost of land used for the dumping of waste is also not accounted for. In the present paper, a comprehensive cost-benefit analysis for the present system of municipal solid waste management in Mumbai is carried out, with due consideration for implicit or hidden costs and benefits. Accounting for the implicit costs and benefits showed a difference of $6 per every tonne of waste disposal. This could show a considerable difference in policy development at the municipality level. Demand supply analysis proved that the present system of waste management would not yield a feasible market solution without private sector participation. With the increasing demand for improved waste management, private sector participation is essential and a Pigouvian tax is a necessary tool to make the private sector participation in solid waste management a success.