Siting Ambient Air Particulate Samplers Near Dirt Roads

There are economic and regulatory incentives for considering alternatives to the direct land disposal of solvent-bearing hazardous waste streams (EPA Hazardous Waste Codes: F001, F002, F003, F004, and F005). These alternatives include recycle/reuse (including use as a fuel substitute), destruction of a stream's solvent component, and treatment prior to land disposal. This paper reviews these three waste management alternatives and discusses their applicability to solvent waste streams having various physical characteristics. Seven waste treatment techniques which may be used to handle solvent wastes are described: incineration, agitated thin-film evaporation, fractional distillation, steam stripping, wet oxidation, carbon adsorption, and activated sludge biological treatment.     

Chemical Manufacturers Association 1984 Hazardous Waste Survey

This paper discusses the Chemical Manufacturers Association's 1984 survey of the chemical industry's hazardous waste management practices. The survey data include a breakdown of how the industry's hazardous wastes are managed, detailing generation, treatment and disposal, and cover 725 plants in 81 companies. The 1984 survey is the third CM A hazardous waste survey, and the paper discusses resultant waste treatment trends from 1981- 1984, the period covered by previous surveys. A total of 278.5 million tons of hazardous waste was treated and disposed by survey respondents. Of this, 276.8 million tons was hazardous wastewater and 1.7 million tons was solid hazardous waste. The survey solid hazardous waste total was projected to the entire industry (Standard Industrial Code 2800) and is estimated at 6.9 million tons. The survey showed continued decreasing trends in hazardous waste generation in the chemical industry. It demonstrated changes in hazardous waste management practices, with decreased use of landfills and increased incineration of the solid wastes that are generated.     

Avoiding Land Disposal of Hazardous Waste

In response to a growing societal mandate, land disposal of hazardous wastes is gradually being replaced by treatment technologies. This shift to "alternative technologies" is the result of the impacts of past land disposal practices on other environmental media (groundwater, surface water, and air). A prime motivation for adopting alternatives to land disposal is to eliminate these cross-media impacts. Alternative technologies, however, can themselves have cross-media environmental impacts which must be recognized and addressed before such technologies are extensively applied. This paper discusses hazardous waste constituents, common disposal practices, alternative technologies currently being applied, possible cross-media environmental impacts of the alternative technologies, and proposed methods of mitigating these environmental impacts. Case studies from uncontrolled hazardous waste sites and industrial operations are used to illustrate the application of alternative technologies. Case studies include the application of waste treatment technologies as well as the adoption of waste minimization techniques.     

固体废物相关概念的基本特点

固体废物法对废物的一些概念进行了定义,在固体废物环境管理当中,对这些概念缺乏深入认识,导致在实际管理中对固体废物和危险废物的调查、认定、统计、管理、预测、设施建设等一系列与废物相关的行动出现偏差甚至不准确。对固体废物、危险废物以及废物利用、处置、贮存、排放等概念包含的内容进行了研究,提出了一些新的认识观点。     

Automated Economic Analysis Model For Hazardous Waste Minimization

Abstract

The U.S. Army has established a policy of achieving a 50 percent reduction in hazardous waste generation by the end of 1992. To assist the Army in reaching this goal, the Environmental Division of the U.S. Army Construction Engineering Research Laboratory (USACERL) designed the Economic Analysis Model for Hazardous Waste Minimization (EAHWM). The EAHWM was designed to allow the user to evaluate the life cycle costs for various techniques used in hazardous waste minimization and to compare them to the life cycle costs of current operating practices. The program was developed in C language on an IBM compatible PC and is consistent with other pertinent models for performing economic analyses. The potential hierarchical minimization categories used in EAHWM Include source reduction, recovery and/or reuse, and treatment. Although treatment is no longer an acceptable minimization option, its use is widespread and has therefore been addressed in the model. The model allows for economic analysis for minimization of the Army’s six most important hazardous waste streams. These include, solvents, paint stripping wastes, metal plating wastes, industrial waste-sludges, used oils, and batteries and battery electrolytes. The EAHWM also includes a general application which can be used to calculate and compare the life cycle costs for minimization alternatives of any waste stream, hazardous or non-hazardous. The EAHWM has been fully tested and implemented in more than 60 Army installations in the United States.     

A Review of Treatment Alternatives for Wastes Containing Treatment Technologies For Hazardous Wastes: Part V

The Hazardous and Solid Waste Amendments to the Resource Conservation and Recovery Act direct the Environmental Protection Agency to determine the available treatment technologies for a number of hazardous waste streams, including halogenated organics. If it is determined that existing technology and capacity is sufficient for the safe management of the designated halogenated organic wastes, these wastes will be prohibited from land disposal, effective July 8,1987. This article summarizes the general characteristics and treatment alternatives for this waste category.     

Treatment Technologies For Hazardous Wastes: Part IV A Review of Alternative Treatment Processes for Metal Bearing Hazardous Waste Streams

The U.S. Congress and the U.S. Environmental Protection Agency believe that treatment and recovery techniques should be given maximum priority when considering methods for managing the nation's generated hazardous waste. A prohibition for the disposal of certain categories of hazardous wastes either directly onto or into the land without being treated to an accepted degree prior to such disposal practice has been promulgated.¹ Wastes containing toxic metals and cyanide complexes have been selected as a group to be restricted. Due to the high generation rate associated with this category, a large capacity of waste treatment processing will be required. Existing and emerging treatment alternatives which are or have the potential to be employed for waste treatment of metal bearing wastes are presented in this paper.     

Hazardous Waste Minimization: Part VI Waste Minimization in the Foundry Industry

The foundry industry is a major consumer of waste materials (scrap). Unfortunately, the recycling of these waste materials can result in the generation of hazardous wastes that must be properly managed at a significant cost. This article focuses on two waste streams in the foundry industry; calcium carbide desulfurization slag and melt emission control residuals. The author presents an overview of how foundries have evaluated different waste management options with the ultimate goal of minimizing the generation of hazardous waste.     

Control of incidental asbestos exposure at hazardous waste sites

This paper discusses asbestos regulations that are not part of Superfund and examines how these regulations can help to identify, evaluate and manage the risk associated with Asbestos Containing Material (ACM) at hazardous waste cleanup sites. Unless one knows where to look for ACM at hazardous waste sites, it may go undetected even after all the traditional sampling is done. Although EPA is currently developing a policy for evaluating risk from asbestos exposure at certain Superfund sites, information from existing regulations can be used to manage hazards associated with asbestos exposure at hazardous waste sites. This paper also identifies where to find governmental agency personnel and consultants who may be retained for site-specific help.     

Recovery,Recycle and Reuse

An overview is provided of hazardous waste recovery, recycle and reuse. The quantities and types of hazardous waste that are generated in the United States are identified. Hazardous wastes are classified according to their economic potential for recovery. Energy and material recovery from organic liquids and metal recovery from sludges have the highest potential for economical recovery. Specific examples are provided of recovery from these types of wastes. A variety of financial and regulatory strategies can be used to encourage recovery from waste streams that do not have a potential for economical recovery. These range from restrictions on burial to the establishment of waste exchanges.     

Flow rates and compositions of incinerated waste streams in the United States.

The quantity and composition of RCRA hazardous wastes incinerated during 1986 were examined using the National Hazardous Waste Survey. This Survey, collected for U.S. EPA by the Research Triangle Institute, is the most extensive examination of hazardous waste generation and management available. The survey data show that although a wide variety of hazardous wastes were treated by incineration, more than 75 percent of incinerated waste streams were from chemical manufacturing. The survey data also show that more than 90 percent of the incinerated wastes were treated by incinerators located at the facility generating the waste. Despite the predominance of a single industrial sector in generating incinerated hazardous wastes, the compositional profile of the wastes is far from uniform. To illustrate this variability, the metals and chlorine content of the wastes are reported along with the sources of the metal and chlorine loadings.     

Siting a Fully Integrated Waste Management Facility in Alberta

The development of a special (hazardous) waste management system is well under way in Alberta, Canada, and completion of an integrated treatment and disposal facility near Swan Hills is expected in 1988. The facility will handle both inorganic and organic waste streams in a physical/chemical treatment plant and high temperature incinerator. Treated liquid residues will be disposed of in a deep well, and treated solid residues in a secure landfill. The chosen treatment technology and the established hydrogeological conditions of the site ensure the maintenance of environmental quality. An intensive site selection and public participation program provided that only locations which were environmentally and socially suitable for this development were considered. Through awareness of the problems of waste and the solutions for its management, and full citizen involvement in the site selection process, the siting and public participation programs accomplished the difficult task of selecting a location for North America’s first fully integrated special waste treatment and disposal facility.     

Hazardous waste disposal in Germany: a case study of the site in Billigheim, Baden-Wurttemberg

The disposal of hazardous waste is a very critical issue. It is associated with many risks. Efforts are made to minimise these by consistent legislation and by proper treatment of the waste. The goal of a hazardous waste disposal site, as described in this paper, is to ensure that hazardous waste is treated and disposed of in a way that does not harm human beings or the environment. To assure this it is necessary to observe the handling of the hazardous waste from its producer up to the disposal site, and to identify possible inherent risks.     

Stabilization of Heavy Metal Containing Hazardous Wastes with Byproducts from Advanced Clean Coal Technology Systems

ABSTRACT

The purpose of this investigation was to evaluate the success of residues from advanced Clean Coal Technology (CCT) systems as stabilization agents for heavy metal containing hazardous wastes. In the context examined here, stabilization refers to techniques that reduce the toxicity of a waste by converting the hazardous constituents to a less soluble, mobile, or toxic form.¹ Three advanced CCT byproducts were used: coal waste-fired circulating fluidized bed combustor residue, pressurized fluidized bed combustor residue, and spray drier residue. Seven metal-laden hazardous wastes were treated: three contaminated soils, two air pollution control dusts, wastewater treatment plant sludge, and sandblast waste. Each of the seven hazardous wastes was treated with each of the three CCT byproducts at dosages of 10, 30, and 50% by weight (byproduct:waste). The treatment effectiveness of each mixture was evaluated by the Toxicity Characteristic Leaching Procedure. Of the 63 mixtures evaluated, 21 produced non-hazardous residues. Treatment effectiveness can likely be attributed to mechanisms such as precipitation and encapsulation due to the formation of hydrated calcium silicates and calcium sulfo-alu-minates. Results indicate that these residues have potential beneficial uses to the hazardous waste treatment community, possibly substituting for costly treatment chemicals.     

Application of Dry Flue Gas Scrubbing to Hazardous Waste Incineration

Dry scrubbing of the flue gas from chemical waste incineration is becoming an increasingly viable alternative to wet scrubbing. This paper discusses the relative advantages and disadvantages of wet and dry scrubbing systems and compares the relative capital and operating costs. The design parameters of the dry scrubbing process are discussed, including reagent atomization, gas dispersion, gas temperatures, and particulate removal. The history of dry scrubbing process applications is discussed, including the successful European hazardous waste systems. Finally, a comparison is made among three very different hazardous waste incinerators in the U.S. that will utilize dry scrubbing systems.     

连云港经济技术开发区危废处置情况的调查研究

通过对连云港市经济技术开发区内医药企业危废产生及库存等情况进行调查,针对目前危废处理处置过程中存在问题,提出解决对策及建议。     

Practical Incinerator Implications

This paper discusses a number of results obtained from a hazardous waste flat flame combustion study with implications to full scale incinerators. The results demonstrate that it is possible to obtain DREs of up to 99.95 percent firing mixtures of CH₂Cl₂/CH₄ and air in such a facility. These results are significant since residence times are at the millisecond level. The paper presents DRE results obtained with this CH₂Cl₂ flat flame system when systematically varying the chlorine loading and equivalence ratio within the flames. Additionally, a PIC DRE is defined as an alternative approach to measure total stack emissions. PIC DRE results are presented for systematic variation of chlorine loading and equivalence ratio. Based upon the data of the paper, a suggested two-stage incineration process is presented which may be both economically advantageous and result in less total PIC emissions as compared with conventional incinerators for certain wastes. The data of this work further indicate that it is kinetically possible to obtain high DREs with corresponding high CO levels for select wastes. Finally, an interpretation of the data suggests that, for a class of liquid wastes, it may be beneficial to vaporize the waste and premix it with gaseous fuel and oxidizer streams, thereby avoiding the need to atomize the waste.     

基于因特网的危险废物转移联单系统研究与开发

危险废物转移联单是跟踪危险废物转移和处理处置的基本方法 ,也是实施危险废物全过程管理的有效工具。然而 ,目前使用的纸质联单系统 ,运行过程繁杂、周期长、耗费人力和物力 ,与现代化管理不相适应。本文提出了符合中国国情的电子化转移联单解决方案 ,论述了系统的设计开发过程和运行情况。这一系统采用了因特网技术 ,能实现联单运行的电子化和自动化 ,简化运行过程 ,提高效率 ,为我国危险废物转移的电子化管理奠定了基础     

A Survey of Graduate Education in Hazardous Waste Management

A brief, informal survey questionnaire was sent to 69 universities in the U.S. Forty-two schools responded. Of the 42 respondents, 30 offered one or more courses in hazardous waste management. The average number of courses offered was 1.76 at an average frequency of once per year. Approximately 400 students take the hazardous waste management courses each year. Only four schools provided explicit laboratory training in hazardous waste analysis/treatment. Sixty-nine percent of the respondents have a research program in hazardous waste management. Typical course outlines are presented. Equipment needs for a hazardous waste laboratory are suggested.     

危险废物处理技术进展及若干建议

较系统地论述了国内固体废物的目前状况、产量，分析了一些典型危险废物处理过程中存在的主要问题和解决方法，提出了深人开展危险废物处理与资源化研究的方向，并给出了环保部门应对危险废物进行处理的建议。