Polycyclic aromatic hydrocarbons in Syrian olive oils and their likely daily intakes

The levels of 16 US Environmental Protection Agency polycyclic aromatic hydrocarbons (16 EPA PAHs) in Syrian olive oils have been determined. Forty-two samples including commercial extra virgin and virgin olive oils, and virgin olive oils from olive mills were analyzed. Only naphthalene (NAP) was detected in all olive oil samples under investigation. Among the studied 16 EPA PAHs, the highest maximum concentration was also observed for NAP (120 μg kg^?1). Moreover, three samples exceeded the European Union (EU) maximum level of 2 μg kg^?1 for benzo[a]pyrene (BaP) in oils and fats, and only one sample exceeded the EU maximum level of 10 μg kg^?1 for the sum of benz[a]anthracene, chrysene, BaP, and benzo[b]fluoranthene (PAH4). The likely daily intakes of the total sum of 16 EPA PAHs, the sum of eight genotoxic PAHs, the sum of PAH4, the BaP, and the BaP equivalent through consumption of Syrian olive oils were estimated.     

PAHs in organic film on glass window surfaces from central Shanghai,China: distribution,sources and risk assessment

Polycyclic aromatic hydrocarbons (PAHs) concentrations were analysed in the organic film on the glass surfaces of different functional areas in central Shanghai. Concentration levels of total PAHs in the organic film ranged from 1,348.5 to 4,007.9 ng m^?2. The concentration of PAHs was lowest in parks and green spaces (1,348.5 ng m^?2) and highest in traffic zones (4,007.9 ng m^?2). A concentration gradient of total PAHs was observed as follows: traffic zones > commercial areas > cultural and educational areas > parks and green spaces. The distribution of PAHs was characterised by 3–4 ring PAHs in the study areas. The most abundant PAHs were phenanthrene (20.5 %), fluorene (16.7 %), pyrene (12.4 %) and chrysene (Chry) (11.2 %). The mass of the bulk film was composed of organic and inorganic compounds and ranged from 246 to 1,288 mg m^?2. The bulk film thickness varied from 144 to 757 nm in the different functional areas. The ratios of An/178 and Fl/202 and principal component analysis suggested that PAHs came mainly from the mixed sources of fossil fuel, coal and incomplete combustion of biomass. Benzo[a]anthracene (BaA)/Chry is not suitable for use as a tracer for the transmission process of PAHs because of the rapid depletion of BaA in the organic film by photooxidation during daylight hours. The concentration of benzo[a]pyrene equivalent (BaPeq) varied from 21 to 701 ng g^?1, and the major carcinogenic contributors of the 16 PAHs were BaP, DahA, B[b/k]F and InP, accounting for 83 % of BaPeq.     

Polycyclic aromatic hydrocarbons in medicinal plants from Syria

The levels of 16 US Environmental Protection Agency polycyclic aromatic hydrocarbons (EPA PAHs) in 10 medicinal plants in different used parts of plant (leaves and flowers) have been determined. The analytical method consists of sample preparation by ultrasonic extraction with dichloromethane followed by silica gel clean-up. Subsequently, the analysis was carried out by reversed-phase high-performance liquid chromatography (HPLC) coupled to both ultraviolet and fluorescence detections in series to insure the detection of all 16 EPA PAHs. It was observed that the sum of the 16 PAHs (ΣPAHs) in the investigated medicinal plants ranged from 47 to 890 μg kg^–1 where the highest ΣPAHs was found in Sage plant sample. Light PAHs were dominants in all studied medicinal plants. The sum of eight genotoxic PAHs (ΣPAH8) have shown a better indicator of the degree of contamination with carcinogenic PAHs compared to benzo[a]pyrene in these products.     

Up to 95 % reduction of chemical oxygen demand of slaughterhouse effluents using Fenton and photo-Fenton oxidation

Meat industries produce effluents containing high concentrations of organic and inorganic compounds, which must be removed before being discharged or reused. Advanced oxidation processes using Fenton reaction coupled with UV, solar radiation, and electrochemical oxidation are promising methods. Here, we treated the effluent from an anaerobic digester using: (a) the photoelectro-Fenton process, using a system with a Ti-RuO₂ anode and a carbon felt cathode, (b) the solar photo-Fenton process, using a batch reactor and a compound parabolic collector, and (c) a combination of Fenton and solar photo-Fenton processes. The effluent had an initial chemical oxygen demand (COD) of 1159 mgL^?1, and we obtained high removal efficiencies of COD, up to 95 %, using the combination of Fenton and solar photo-Fenton processes.     

Distribution,source apportionment and health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in intertidal sediment of Asaluyeh,Persian Gulf

Surface sediment samples were collected from intertidal zone of Asaluyeh, Persian Gulf, to investigate distribution, sources and health risk of sixteen polycyclic aromatic hydrocarbons (PAHs). Total PAH concentrations ranged from 1.8 to 81.2 μg kg^?1 dry weight, which can be categorized as low level of pollution. Qualitative and quantitative assessments showed that PAHs originated from both petrogenic and pyrogenic sources with slight pyrogenic dominance. Source apportionment using principal component analysis indicated that the main sources of PAHs were fossil fuel combustion (33.59%), traffic-related PAHs (32.77%), biomass and coal combustion (18.54%) and petrogenic PAHs (9.31%). According to the results from the sediment quality guidelines, mean effects range-median quotient (M-ERM-Q) and benzo[a]pyrene toxic equivalents (BaP_eq), low negative ecological risks related to PAH compounds would occur in the intertidal zone of Asaluyeh. The total benzo[a]pyrene (BaP) toxic equivalent quotient (TEQ^carc) for carcinogenic compounds ranged from 0.01 to 7 μg kg^?1-BaP_eq, indicating low carcinogenic risk. The human health risk assessment of PAH compounds via ingestion and dermal pathways suggests low and moderate potential risk to human health, respectively.     

Effect of the chemical composition of organic extracts from environmental and industrial atmospheric samples on the genotoxicity of polycyclic aromatic hydrocarbons mixtures

Particulate organic matter (PM) present in the atmosphere is a complex mixture of chemicals like polycyclic aromatic hydrocarbons (PAH) that may exert adverse health effects including respiratory and cardiovascular disturbances and cancer. In this study, airborne samples from environmental or industrial areas exhibiting different physicochemical composition were compared for their capacities to induce DNA damage in human hepatocytes HepG2. DNA strand breaks and DNA adducts formed by benzo[a]pyrene-7,8-dihydrodiol-9,10-epoxide (BPDE), the most reactive metabolite of the carcinogenic benzo[a]pyrene (B[a]P), were measured with the comet assay and by high-performance liquid chromatography (HPLC)/mass spectrometry, respectively. Cells were exposed to organic matter extracted from PM. Experiments were performed either at a constant concentration of B[a]P or at concentrations corresponding to fixed air volumes. Results show that industrial extracts tend to produce more benzo[a]pyrene diol epoxide-N ²-2′-deoxyguanosine (BPDE-N ²-dGuo) DNA adducts than strand breaks, whereas the opposite was observed with environmental extracts. The chemical composition of the extracts significantly impacts the nature and levels of DNA damage. The amount of B[a]P and interaction with other contaminants in the extracts need to be considered to explain the formation of DNA damage. These results emphasize the use of in vitro tests as promising and complementary tools to widely used toxic equivalent factor (TEF) approach in order to assess health hazards related to chemical exposure of the general population.     

Occurrence of and risk posed by highly carcinogenic dibenzo[def,p]chrysene isomers in urban soil

Dibenzopyrene and its isomers are considered the most potent carcinogens of all polycyclic aromatic hydrocarbons tested to date. However, despite public concerns over their deleterious effects, they have not been extensively studied. The occurrence of four highly carcinogenic isomers of dibenzopyrene – dibenzo[def,p]chrysene, dibenzo[a,e]pyrene, dibenzo[a,i]pyrene, and dibenzo[a,h]pyrene in urban soil samples from Shanghai, China, have been determined in this study, as well as that of benzo[a]pyrene and coronene. A total of 14 peaks with ions at m/z 302 were detected by gas chromatography-mass spectrometry. Although the concentrations of benzo[a]pyrene and the sum of the 16 priority polycyclic aromatic hydrocarbons were greater than that of dibenzopyrene and its isomers, the carcinogenic potency of the latter was higher than that of benzo[a]pyrene. The results also indicate that the relative carcinogenic potency of the four dibenzopyrene isomers in the samples is higher than that of the 16 priority polycyclic aromatic hydrocarbons.     

Polycyclic aromatic hydrocarbons in soils around Guanting Reservoir,Beijing, China

The concentrations of 16 polycyclic aromatic hydrocarbons (∑ 16PAHs) were measured by gas chromatography equipped with a mass spectrometry detector (GC-MS) in 56 topsoil samples around Guanting Reservior (GTR), which is an important water source for Beijing. Low to medium levels of PAH contamination (mean=394.2±580.7 ng g^?1 dry weight (d.w.)) was evident throughout the region. In addition, localised areas of high PAH contamination near steel and cement factories were identified, with ∑ 16PAHs concentrations as high as 4110 ng/g, dry weight (d.w.). There was a significant positive correlation (r²=0.570, p<0.01) between total organic carbon content and ∑ 16PAHs concentrations. Phenanthrene was the predominant compound, accounting for 27.2% of the ∑ PAH concentration, followed by chrysene>pyrene>benzo[a]anthracene≈ benzo[b]fluoranthene≈ benzo[a]pyrene. Four-ring PAH homologues (39%) were dominant. The higher proportion of 4–6 ring homologues, molecular indices, and the spatial distribution of PAH indicated that industrial discharges, incineration of wastes and traffic discharges were the major sources of soil PAHs around the water reservoir.     

Treatment of organic pollutants by homogeneous and heterogeneous Fenton reaction processes

Nowadays, the water ecosystem is being polluted due to the rapid industrialization and massive use of antibiotics, fertilizers, cosmetics, paints, and other chemicals. Chemical oxidation is one of the most applied processes to degrade contaminants in water. However, chemicals are often unable to completely mineralize the pollutants. Enhanced pollutant degradation can be achieved by Fenton reaction and related processes. As a consequence, Fenton reactions have received great attention in the treatment of domestic and industrial wastewater effluents. Currently, homogeneous and heterogeneous Fenton processes are being investigated intensively and optimized for applications, either alone or in a combination of other processes. This review presents fundamental chemistry involved in various kinds of homogeneous Fenton reactions, which include classical Fenton, electro-Fenton, photo-Fenton, electro-Fenton, sono-electro-Fenton, and solar photoelectron-Fenton. In the homogeneous Fenton reaction process, the molar ratio of iron(II) and hydrogen peroxide, and the pH usually determine the effectiveness of removing target pollutants and subsequently their mineralization, monitored by a decrease in levels of total organic carbon or chemical oxygen demand. We present catalysts used in heterogeneous Fenton or Fenton-like reactions, such as H₂O₂–Fe³⁺(solid)/nano-zero-valent iron/immobilized iron and electro-Fenton-pyrite. Surface properties of heterogeneous catalysts generally control the efficiency to degrade pollutants. Examples of Fenton reactions are demonstrated to degrade and mineralize a wide range of water pollutants in real industrial wastewaters, such as dyes and phenols. Removal of various antibiotics by homogeneous and heterogeneous Fenton reactions is exemplified.     

Mikrobieller PAK-Abbau

The biodegradation of the five ring PAH benzo[a]pyrene (BaP) is assumed to be limited by the low water solubility of this compound. A mixed culture of microorganisms — isolated from a PAH-contaminated soil — was able to degrade¹⁴C labelled BaP in mineral medium by cometabolism with phenanthrene, fluoranthene, anthracene and pyrene as sources of carbon and energy. The mineralisation of these compounds to low levels resulted in an inhibition of the degradation of BaP. After the new addition of the four PAH compounds to the culture medium the mineralisation of BaP started again. A non-ionic surfactant of the alkylpolyglycoside type (Plantacare 2000 UP) increased the concentration of BaP in the culture medium because of solubilization. At high Plantacare concentrations, the degradation of BaP was completely inhibited above the critical micelle concentration (cmc). The degradation of the three and four ring PAHs was also inhibited. If the surfactant was metabolised to concentrations below the cmc, an increase of mineralisation of BaP could occur up to 24% in 384 days.     

养殖场饲养鸡对苯并[a]芘的摄入、排泄和积累

在北京市郊区一家中等规模养鸡场采集了不同品种和不同生长阶段的饲养鸡的肌肉和内脏样品,并同步采集了鸡蛋、饲料、粪便和大气样品,测定了其中苯并[a]芘的浓度,据此分析了苯并[a]芘在饲养鸡体内的积累、排泄和代谢的动态过程.结果显示,饲养鸡体内各组织苯并[a]芘的湿重浓度在0.024～0.15ng·g-1之间,肌肉中的浓度显著低于其它组织;饲料和粪便中的浓度显著高于体内各组织浓度.饲养鸡体内摄入的苯并[a]芘约60%在体内代谢,约三分之一直接排泄进入粪便,仅有少量残留在体内如表皮、肌肉和其他器官中.肌肉、肝脏和胃中苯并[a]芘浓度和总累积量的动态变化规律不尽相同.北京居民摄食类似鸡肉导致的对苯并[a]芘的暴露量较春、秋、冬季呼吸暴露量低两个量级,与夏季呼吸暴露量相当.     

Thermal treatment of plasma-synthesized goethite improves Fenton-like degradation of orange II dye

Various iron oxides are used for Fenton reactions to degrade organic pollutants. The degradation efficiency may be improved by transforming an iron oxide phase to another. Here, we report on the transformation of goethite into hematite by thermal treatment at 400 °C. The products were analyzed by X-ray diffractometry, Raman spectroscopy, scanning electron microscopy and N₂-physisorption. The catalytic activities were measured for orange II bleaching at initial concentration of 25 mg L^?1, pH 3, catalyst concentration of 0.2 g L^?1; 5 mM H₂O₂, 30 °C. Results show that the synthesized goethite was successfully transformed into hematite, and the specific surface area of the material increased from 134 to 163 m² g^?1. The bleaching efficiency of the orange II dye reached 100 % for the hematite product, versus 78 % for goethite. Therefore, a moderate thermal treatment of a plasma-synthesized goethite improves the catalytic oxidation of organic pollutants.     

Oyster shell reduces PAHs and particulate matter from incense burning

This is the first report showing reduction of particle matter and PAHs from incense burning by addition of oyster shell. Worshiping ancestors and gods by burning incense sticks and joss paper is a very important tradition in many Asian regions. More than 45 % of families in Taiwan burn incense twice a day. Unlike joss paper burning, most of the incense burning occurs indoors, thus creating a risk for human health. Previous reports have indeed evidenced toxicity of incense, notably due to particulate matter and polycyclic aromatic hydrocarbons (PAHs). However, there are few methods to reduce particle matter and PAHs from incense burning. We hypothesize that oyster shell may be used to reduce incense fumes toxicity. Indeed a large amount of unused oyster shell is discarded due to increasing seafood consumption. Here, two types of incense were made in the laboratory, and then 5–30 % of oyster shells were added to the incense to study the reduction of particle matter and PAHs. Results show that reduction of particle matter and PAH emission increased with oyster shell addition. The reduction of emission factors is ?35 % for mean particle matter, ?21 % for particle-phase PAHs, and ?37 % for benzo[a]pyrene equivalent concentration (BaP_eq), using 30 % oyster shell additive. The addition of 10 % oyster shell reduces the burning time by 8.3 min, increases the burning rate by 3.4 mg/min, and reduces particle matter by 6.4 mg/g incense, particle-phase PAHs by 0.67 μg/g incense, and BaP_eq by 0.23 μg/g incense. The reductions of particle matter, particle-phase PAHs, and BaP_eq correspond to about 640 metric tons, 67, and 23 kg, respectively, per year. Our findings will help to produce safer and cleaner incense.     

Photocatalytic degradation of methyl orange using ZnO/TiO2 composites

ZnO/TiO₂ composites were synthesized by using the solvothermal method and ultrasonic precipitation followed by heat treatment in order to investigate their photocatalytic degradation of methyl orange (MO) in aqueous suspension under UV irradiation. The composition and surface structure of the catalyst were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and transmission electron microscopy (TEM). The degradation efficiencies of MO at various pH values were obtained. The highest degradation efficiencies were obtained before 30 min and after 60 min at pH 11.0 and pH 2.0, respectively. A sample analysis was conducted using liquid chromatography coupled with electrospray ionization ion-trap mass spectrometry. Six intermediates were found during the photocatalytic degradation process of quinonoid MO. The degradation pathway of quinonoid MO was also proposed.     

Metal Interactions in carcinogenesis†

Mixed exposures to a number of metallic compounds may give rise to a carcinogenic response in humans.

An interaction between occupational exposure to arsenic and cigarette smoking has been documented epidemiologically. A multiplicative effect was indicated concerning the occurrence of lung cancer when both of the exposures were present. Several experimental studies have been reported in the literature concerning interactions between benzo(a)pyrene and Fe₂O₃ as well as some other metallic compounds like Ni₃S₂, PbO, MgO and TiO₂ in relation to respiratory carcinogenicity. There is also limited evidence of a positive interaction between arsenic trioxide and benzo(a)pyrene. Particles containing V and Ni were obtained from the flue gases of power plants burning heavy fuel oil. Such particles were not carcinogenic themselves but enhanced the carcinogenicity of benzo(a)pyrene even more efficiently than Fe₂O₃.

Increased dietary selenium intakes can decrease the carcinogenicity of several organic carcinogens in animals and dietary zinc can effectuate both enhancement and inhibition of carcinogenicity depending on dietary concentration.     

Sonocatalytic degradation of tetracycline antibiotic in aqueous solution by sonocatalysis

Tetracycline (TC), one of the most common antibiotics, is often poorly bio-degraded in conventional wastewater treatment plants. In this study, the sonocatalytic degradation of TC was investigated using TiO₂ nano-particles as catalyst. The effect of pH, initial TC concentrations, reaction times, and H₂O₂ concentrations were evaluated. The efficacy of ultrasonic irradiation alone in the removal of this pollutant was negligible but removal efficiency increased upon addition of TiO₂ up to 250 mg L^?1; increase of pH and initial TC concentration attenuated TC degradation. Addition of H₂O₂ raised the removal efficiency so that complete removal of TC was achieved within 75 min.     

河北省土壤苯并(a)芘含量的空间变异特征

根据实地采样数据,运用地统计学方法分析苯并(a)芘污染的空间变异特征,同时研究各地污染水平与其自然环境、产业布局之间的关系。结果表明:土壤苯并(a)芘含量在研究区存在空间异质性,在240 km空间尺度上尤其明显,块金值(C0)和基台值(C0 C)之比为44%;这说明其空间变异由结构性因子(如土壤有机质)和随机性因子(如污染源分布)共同构成;钢铁工业(包括焦化工)是苯并(a)芘的主要排放源,土壤苯并(a)芘污染也以钢铁工业(包括焦化工)发达的城市及其附近区域为核心。     

生物堆模拟法修复苯并[a]芘和二苯并[a,h]蒽污染土壤

采用生物堆模拟方法,研究苯并[a]芘(BaP)和二苯并[a,h]蒽(DBA)污染土壤的生物修复条件.结果表明,在生物堆中投加绿肥或秸秆可明显促进BaP和DBA的降解;通气速率分别为0.05和0.10m3·h-1时BaP和DBA的降解率无明显差异;添加EM菌对BaP和DBA的降解有抑制作用.在投加20g·kg-1绿肥、通气速率为0.10m3·h-1时,BaP和DBA的去除效果最佳,处理160d时降解率分别达64.8％和74.9％.     

Coupled electrocoagulation–electro-Fenton for efficient domestic wastewater treatment

This article reports the first use of coupled electrocoagulation and electro-Fenton (EF-EC) to clean domestic wastewater. Domestic wastewater contains high amounts of organic, inorganic and microbial pollutants that cannot be usually treated in a single step. Here, to produce an effluent suitable for discharge in a single process step, a hybrid process combining electrocoagulation and electro-Fenton was simultaneously used to decrease chemical oxygen demand (COD), turbidity and total suspended solids (TSS) from domestic wastewater. The electrocoagulation–electro-Fenton process was firstly tested for the production of H₂O₂ using Ti–IrO₂ and vitreous carbon- or graphite electrodes arranged at the anode and the cathode, respectively. The concentration of H₂O₂ recorded at 1.5 A of current intensity during 60 min of electrolysis using vitreous carbon- and graphite electrodes at the cathode was 4.18 and 1.62 mg L^?1, respectively. By comparison, when the iron electrode was used at the anode, 2.05 and 1.06 mg L^?1 of H₂O₂ were recorded using vitreous carbon and graphite, respectively. The H₂O₂ concentration decrease was attributed to hydroxyl radical formation generated by the Fenton reaction. Electro-Fenton using iron electrode at the anode and vitreous carbon at the cathode with a current density imposed of 0.34 A dm^?2 ensures the removal efficiency of 50.1 % COD_T, 70.8 % TSS and 90.4 % turbidity. The electrocoagulation–electro-Fenton technique is therefore a promising secondary treatment to simultaneously remove organic, inorganic and microbial pollutants from domestic, municipal and industrial wastewaters.