E‐waste in the world today: An overview of problems and a proposal for improvement in Brazil

Environmental issues have been at the center of society's concerns for a long time. Recently, this kind of concern is growing even more due to the damage caused to the environment by electrical and electronic product waste. Based on this same concern, this work aimed to analyze, through a literature review, the production and treatment of electronic waste in today's world, with an emphasis on Brazil and China. The articles reviewed point to an increase in the production of this type of waste, in both Brazil and China, and reveal that the current processes of treatment of electronic waste mostly aim to obtain profit through the recovery of precious metals such as copper. This paper concluded that although Brazil is one of the major producers of e‐waste, more than 90% of its e‐waste has not had a proper final destination. This deficiency in e‐waste treatment in Brazil is mainly due to financial factors and the lack of a robust educational policy focused on the environment. Thus, this work suggests the implementation of an effective educational policy aimed at environmental conservation, as well as investments in research on recycling methods in Brazil, especially on the use of e‐waste as an aggregate in the manufacture of concrete.     

Source separation-driven reverse logistics in MSW management

The research reported here characterizes municipal solid waste in terms of the quantity produced as a function of time and pre-sorting as well as post-sorting composition in a municipality with 90,000 inhabitants located in Central Brazil. It pursues the objective of identifying the basic strategy of a municipal solid waste management model specific to household waste. It shows that sorted-waste composition, and not raw waste composition, drives reverse logistics. The household waste production rate is 45 tons per day. The research provides data on the base case of progressive annual tipping rates without a diversion target. It goes on to determine a landfill diversion potential of 67 % of domestic waste produced, based on sorted waste composition data. Annual progress indicators required to reach this potential within a chosen timeframe are detailed. Reverse logistics capacity is identified and found sufficient to remove all inert waste items separated at the source. The necessary logistics for biodegradable matter, based on decentralized composting tests, is outlined. The challenge of the municipal administration is identified as the promotion of source separation, and the funds required for this undertaking are shown to derive from the correspondingly reduced landfill maintenance.     

The Effectiveness of the UK Landfill Tax

This review of the UK's landfill tax generates two main contributions to our understanding of waste management in the UK. First, the review identifies areas in which the tax is least effective and considers policy implications associated with this. In particular, the tax has failed to significantly change the behaviour of domestic waste producers and SMEs. Second, it identifies continued information gaps that might be addressed. In particular, the landfill tax is intended to contribute to a transition away from landfilling of waste, towards recovery, recycling, re-use and waste minimization. This review of available evidence finds that there is reasonable data to monitor progress towards recycling, but not for re-use or waste minimization.     

Modelling of the location of vehicle recycling facilities: A case study in Poland

The technical progress causes that increasing number of used devices presents a threat for environment, particularly in the rural areas. It can be prevented by organizing a proper system of waste disposal. Currently, the most important problem to solve is recycling of vehicles. The key element for the improvement of the functioning of the recycling network in Poland is to redesign the system so that it will allow for a reduction of the total cost related to the vehicle recycling. This paper presents a modelling approach that could be used to establish one important part of the reverse logistics (RL) network for end-of-life vehicles (ELVs) by defining the optimum locations for dismantling facilities. The proposed modelling approach is illustrated using Mazovia province in Poland as an example. The optimization criteria for the location of the elements of the recycling network are the components of the total cost of the ELV's recycling. Due to high complexity of the model a genetic algorithm has been adapted for solving the model and getting a good solution in a reasonable run time. The criteria of optimization was cost of the following processes: transportation, storage, and dismantling of ELVs. The results of simulation proved that the transportation costs of parts and materials may amount to about 70%, and that the cost of dismantling may exceed 25% of the total cost of recycling. The obtained results confirmed that genetic algorithm method can be used effectively to location the ELV's dismantling facilities. The effect of changing the location of processing facilities on the location of dismantling stations was also studied. The developed model is universal and may be used to determine the locations of different kinds of facilities organized in a reverse recycling network.     

Land Use Planning and Waste Management in Scotland

This study considers the planning system in Scotland as it relates to waste management. It examines local, structure and waste disposal plans in nine areas to identify links between the two systems. Initial findings reveal that statutory plans have limited influence on the location of new waste facilities and the reasons for this are explored. The European Union now requires the preparation of a National Waste Strategy (NWS) based on the principle of the waste hierarchy. The research concludes that effective waste management requires a close relationship between the NWS and development plans.     

A life cycle based multi-objective optimization model for the management of computer waste

The accelerating pace of waste generation from used electrical and electronic equipment is of growing global concern. Within this waste stream, computer hardware is quite significant in terms of both volume and risk to the environment because of the hazardous materials within it. The waste management hierarchy of prevention, reuse, recycle, treatment and disposal in landfill is accepted as a universal guideline for waste management. The contemporary concept of integrated solid waste management is very complex comprising of not only the environmental aspects or the technical aspects of the waste management hierarchy, but also incorporating economic, institutional, perceived risk and social issues in the context of complete life cycle of waste. Moreover, when to shift from one stage of hierarchy to another, is an involved decision warranting inclusion of several case specific issues. This paper presents a life cycle based multi-objective model that can help decision makers in integrated waste management. The proposed model has been applied to a case study of computer waste scenario in Delhi, India, which apart from having computer waste from its native population receives large quantities of imported second hand computers. The model has been used to evaluate management cost and reuse time span or life cycle of various streams of computer waste for different objectives of economy, perceived risk and environmental impact. The model results for different scenarios of waste generation have been analyzed to understand the tradeoffs between cost, perceived risk and environmental impact. The optimum life cycle of a computer desktop was observed to be shorter by 25% while optimizing cost than while optimizing impact to the environment or risk perceived by public. Proposed integrated approach can be useful for determining the optimum life cycle of computer waste, as well as optimum configuration of waste management facilities, for urban centers where computer waste related issues are of growing concern.     

A life cycle based multi-objective optimization model for the management of computer waste

The accelerating pace of waste generation from used electrical and electronic equipment is of growing global concern. Within this waste stream, computer hardware is quite significant in terms of both volume and risk to the environment because of the hazardous materials within it. The waste management hierarchy of prevention, reuse, recycle, treatment and disposal in landfill is accepted as a universal guideline for waste management. The contemporary concept of integrated solid waste management is very complex comprising of not only the environmental aspects or the technical aspects of the waste management hierarchy, but also incorporating economic, institutional, perceived risk and social issues in the context of complete life cycle of waste. Moreover, when to shift from one stage of hierarchy to another, is an involved decision warranting inclusion of several case specific issues. This paper presents a life cycle based multi-objective model that can help decision makers in integrated waste management. The proposed model has been applied to a case study of computer waste scenario in Delhi, India, which apart from having computer waste from its native population receives large quantities of imported second hand computers. The model has been used to evaluate management cost and reuse time span or life cycle of various streams of computer waste for different objectives of economy, perceived risk and environmental impact. The model results for different scenarios of waste generation have been analyzed to understand the tradeoffs between cost, perceived risk and environmental impact. The optimum life cycle of a computer desktop was observed to be shorter by 25% while optimizing cost than while optimizing impact to the environment or risk perceived by public. Proposed integrated approach can be useful for determining the optimum life cycle of computer waste, as well as optimum configuration of waste management facilities, for urban centers where computer waste related issues are of growing concern.     

Dilemmas and advances in corporate social responsibility in Brazil. The work of the Ethos Institute

This article discusses the development of corporate social responsibility (CSR) in Brazil from the perspective of the Ethos Institute of Business and Social Responsibility. The Institute is a not‐for‐profit, non‐governmental organization, that has played a leading role in the Brazilian CSR effort. In Brazil, CSR initiatives have a long tradition of philanthropy, a consequence of the country's great social inequalities. The increased attention to corporate social responsibility has paralleled growing concern about sustainable development and the intensifying activities of pressure groups (consumers, customers, investors, NGOs, labour unions, the media, among others) that have been increasing since the 1990s as natural resources are progressively becoming exhausted, social tensions rising and environmental conditions deteriorating worldwide. This article identifies problems and obstacles to the growth of corporate social responsibility in Brazil, as well as advances and alternatives for CSR and towards creating conditions for the country to be internationally competitive and sustainable in the financial, social and environmental areas.     

A Successful Pilot Project of Decentralized Household Waste Management in Brazil

Summary Present municipal waste management paradigms in Brazil do not allow for flexible approaches to solving an extremely dynamic problem. This paper discusses the basic flaws in present thinking models of residents and municipal administrators. Fundamental arguments presented on municipal solid waste relate to nomenclature, destinations, definitions, logistics, social dynamics, social assistance programs, education and employment philosophies. In each case, the consequences of the stalemate are explained in terms of the unsustainable situation of constantly growing landfills. In sequence, a proactive thinking model is presented and explained that has the potential of drastically reducing landfill size. It is called Municipal Transit Material Processing. The model has been tested successfully in small communities and is now available for scale-up. The landfill diversion achieved stands at 62% of household waste in comparison with 15% theoretically possible in Brazil with selective collection models. Although of necessity the arguments apply directly to Brazil, the basic ideas behind the reasoning may be extrapolated to other Southern countries. The following simple example will illustrate to the reader the type of paradigm inversion the paper proposes to convey. The classical political slogan in Brazil is “get children out of garbage dumps”. The inversion proposed and explained is “do away with garbage dumps”.     

The use of forests for the purpose of tourism: the case of Belek Tourism Center in Turkey

The main aim of this article is to examine and review the usage of forests for the purpose of tourism in Turkey with the case study of Antalya-Belek. The use and conversion of forest lands is central to tourism development. Land use change is responsible for the majority of the negative environmental impacts of tourism on natural resources. Worldwide, forests and coastal zones are converted for the construction of tourist facilities. The rapid emergence of mass tourism development in Turkey, encouraged without considering protection and sustainable use of natural and cultural resources, has resulted in serious problems in forest areas. This paper is particularly concerned with land use change in forests (or deforestation) created by the allocation of forest lands to build tourist facilities. In Belek, a tourism center located in Antalya province's coastal areas and the fastest growing destination of the country, all tourist facilities have been established in forest lands under the status of conservation forest. Today, the Belek Conservation Forest is under severe pressure from tourism.     

Solid waste characterization,quantification and management practices in developing countries. A case study: Nablus district – Palestine

Solid waste management (SWM) is one of the most challenging issues faced by developing countries that suffer from serious pollution problems caused by the generation of large waste quantities. This paper presents the case study of SWM in the Nablus district – Palestine. Surveys for household residents' and SWM program operators, field investigations, on-site waste measurements and characterizations were conducted. Per capita waste generation rates varied between different localities although trends were similar. Overall, the majority of waste was organic (65.1% by weight), suggesting a strong resource recovery potential in terms of animal feed or compost. Recyclable waste (plastic, paper and card) made up 16.7% by weight the waste composition suggesting an incentive to introduce source separation. Household attitudes complemented the waste characterization study, revealing the main problems faced. SWM operators quoted on the current status, highlighting problems with disposing in unsanitary landfills, ineffective solid waste fees system, increasing solid waste quantities and lacking equipment and experienced personnel. To enhance sustainable SWM, public awareness, funding, expertise, equipment and facilities and other provisions currently lacking or inappropriate must be provided.     

“十三五”医疗废物综合管理思路与对策研究

本文首先总体分析了"十二五"期间我国医疗废物环境管理和技术在完善制度建设、加快处理设施建设、打击环境违法行为和创新开展医疗废物处置示范等方面取得的进展和成效,分析了当前医疗废物管理中存在的包括缺乏针对性制度、处理设施总体技术水平不高、新增布局缺乏指导、收费水平偏低等突出问题。面向"十三五",本文提出环境管理四个方面的主要思路,从思路出发,提出"十三五"重点开展的任务,包括开展基础性调查评估、修订医疗废物管理条例、优化医疗废物处理设施布局、建立区域医疗废物协同处理模式、开展处理设施稳定排放达标整治工程、创新医疗废物环境管理和加快解决医疗废物处理收费中的突出问题等,为相关环境管理部门提供决策参考。     

Domestic waste recovery by Local Authorities in the UK: a background to the Green Paper

The recent Green Paper ‘War on Waste’ urges local authorities to organize the recovery and re-use of waste materials in their areas. It is ambiguous, however, on the question of whether recovery should be regarded primarily as a commercial venture or a social service. In this article some of the factors to be considered before embarking on a recovery programme are discussed, and the authors identify some of the arguments for and against the view that recovery is properly a local authority service. Questions considered include the costs and savings associated with a recovery scheme, the impact of the activities of opportunists and the role of the private contractor and voluntary organizations.     

Attitudes and actions towards recycling behaviours in the Limerick,Ireland region

Recycling across Ireland has increased incrementally since the introduction and implementation of the Landfill Directive 1999/31/EC, the WEEE directive 2002/96/EC, and the Waste Framework Directive 2008/98/EC. As a result of the implementation of the aforementioned directives, the volume of waste sent to landfill has fallen, household composting increased and recovery of municipal waste recyclables continues to improve. The improvements witnessed, are in part achieved as a result of the introduction of the 2-bin and 3-bin collection service. The improvement of facilities at recycling centres and bring banks have been instrumental in the gains achieved in recycling rates.NIMBYism, however, remains a constant impediment to procuring suitable sites for the recycling receptacles. It is not unusual for people to seek convenience whilst not wanting the associated problems on their doorstep. NIMBYism is something that most individuals are guilty of and it is considered to be quite normal. The structural difficulties associated with recycling rates are the first that need to be confronted. By altering the landscape, behaviours can be changed and improved. In the instance of bring banks and the social problems that are associated with them such as fly-tipping, changing the visual aspect of the receptacles and their positioning may improve recycling rates and reduce the number of instances of fly-tipping and littering.This paper presents the results of 509 questionnaires distributed to nine schools in the Limerick City and County environs. The questionnaires, distributed to primary schools actively participating in the Green School Programme, were analysed so as to get an understanding of the motivations and the deterrents surrounding household recycling of waste. From the analysis recommendations are made to reduce the social problems associated with bring banks and to increase the percentage of householders availing of waste collection services.     

Air quality assessment for land disposal of industrial wastes

Air pollution from hazardous waste landfills and lagoons is largely unknown. Routine monitoring of toxic air contaminants associated with hazardous waste facilities is difficult and very costly. The method presented in this paper would be useful for air quality assessment in the absence of monitoring data. It may be used as a screening process to examine the question of whether or not volatilization is considered to be significant for a given contaminant and also to evaluate permit applications for new hazardous waste facilities concerning waste volatilization problems.     

Economies of scale for future lithium-ion battery recycling infrastructure

While lithium-ion battery (LIB) technology has improved substantially to achieve better performance in a wide variety of applications, this technological progress has led to a diverse mix of batteries in use that ultimately require waste management. Development of a robust end-of-life battery infrastructure requires a better understanding of how to maximize the economic opportunity of battery recycling while mitigating the uncertainties associated with a highly variable waste stream. This paper develops and applies an optimization model to analyze the profitability of recycling facilities given current estimates of LIB technologies, commodity market prices of materials expected to be recovered, and material composition for three common battery types (differentiated on the basis of cathode chemistry). Sensitivity analysis shows that the profitability is highly dependent on the expected mix of cathode chemistries in the waste stream and the resultant variability in material mass and value. The potential values of waste streams comprised of different cathode chemistry types show a variability ranging from $860 per ton¹ for LiMn₂O₄ cathode batteries to $8900 per ton for LiCoO₂ cathode batteries. In addition, these initial results and a policy case study can also help to promote end-of-life management and relative policymaking for spent LIBs.     

DBO模式在医疗废物集中处置设施中的应用探讨

我国医疗废物集中处置行业呈现多种投资来源和多种运营模式并存的格局,医疗废物集中处置设施建设和运营主要采用以BOT为主的特许经营模式,部分设施由于模式选择不当,导致产权边界不清、稳定运行困难等问题,一定程度限制了行业的可持续发展。近年来开始应用于我国污水处理设施的DBO模式具有责任主体一致、建设运营效率较高等特点,在环境污染治理领域的应用前景较为广阔。本文通过对DBO模式和BOT模式的所有权归属、责任主体、实施期限等方面进行对比,分析得出DBO模式较BOT模式在设施的运营阶段具有突出优势,应用于医疗废物集中处置设施可以更有效地保证运营效率、节约财政支出、强化政府监管。同时,预期在医疗废物集中处置项目中推行DBO模式可能存在的阻碍,包括政府积极性不高、招商面临一定难度、实施过程的不确定因素较多等,并有针对性提出了在中小城市开展试点、发放环境基础设施建设债券、邻近区域多个项目捆绑招商等建议,以促进DBO模式在医疗废物集中处置设施中的应用。     

Canadian Innovations in Siting Hazardous Waste Management Facilities

/ Siting hazardous waste facilities is an extremely complex and difficult endeavor. Public aversion to the construction of these facilities in or near their community often results in concerted opposition, referred to as the NIMBY syndrome. For the most part, siting processes do not fail because of inadequate environmental or technical considerations, but because of the adversarial decision-making strategies employed by the proponents. Innovative siting processes used in the provinces of Alberta and Manitoba offer tangible evidence of the successful application of an innovative siting approach based on the principles of decentralization of decision-making authority and full and meaningful public involvement. The purpose of this paper is to evaluate four Canadian siting processes from the perspective of public participation and access to decision-making authority. Examples of siting processes related to hazardous waste management facilities are provided from the provinces of Alberta, Manitoba, British Columbia, and Ontario. Siting has evolved from approaches dominated by top-down decision making to increasing decentralized and pluralistic approaches. Focusing on social and political concerns of potentially affected communities and on the process of decision making itself are fundamental to achieving siting success. In Alberta initially, and later in Manitoba, this new "open approach" to siting has resulted in the construction of the first two comprehensive hazardous waste treatment facilities in Canada.KEY WORDS: Hazardous waste facilities; Siting methodologies; Public participation     

Failing to Site Hazardous Waste Facilities Voluntarily: Implications for the Production of Sustainable Goods

A current approach to the process of siting hazardous waste facilities is to seek 'willing host' communities that will not oppose but rather voluntarily accept risky facilities. Voluntary siting strategies have been put forward as the solution to hazardous waste location problems, and there have indeed been a small number of siting successes achieved voluntarily. This paper argues that, despite claims about voluntary processes, there are indications that few 'willing host' sites will be found in response to the many that are proposed. Instead, it suggests that the limited success of siting attempts, voluntary or otherwise, signals a new phase in hazardous waste management, a shift in focus from where to site a facility to whether a good is worth producing at all if its wastes are not siteable. A characteristic of this phase is the growing influence that the disposal potential of the generated waste can have on future management decisions to produce a good. In practice, siting failure may be one of the critical turning points on the road to sustainable production. It can accomplish what technology and environmental assessments have generally been unable to do: foresee the sustainability of a good. In this way, siteability can be seen as one indicator of sustainable production. A good can be considered sustainable if the wastes associated with its production are siteable.     

The Prospect of Municipal Waste Landfill Diversion Depends on Geographical Location

This study reports on experimentation with municipal and industrial solid waste in Brazil, on mutual inspection of municipal sanitation models in selected Spanish and Brazilian towns, and on observations of municipal solid waste (MSW) management models effective in Argentina, Great Britain, Sweden, and Germany. The diversity of management strategies inhibits technology transfer. Judging by the models inspected, Sweden and Germany appear to be best prepared for stricter European landfill diversion targets in the near future. Experimentation in Brazil has resulted in a proactive MSW management model based on divided collection, which achieves 80 percent landfill diversion. This result, surprisingly, meets and exceeds European diversion targets in a South American context. As the gap in strategy and target narrows between South America and Europe, both technology and management methods may gain intercontinental mobility and thus enhance commercial ties between the two markets in the specific branch of MSW management.