木聚糖酶在硫酸盐木浆辅助漂白中的应用研究

结合某木浆厂的实际运行数据,对采用木聚糖酶辅助漂白前后的木浆质量、主要物料消耗量及产生废水的污染物指标进行了详细分析.结果表明,在工艺运行参数不变条件下,使用木聚糖酶辅助漂白能够显著提高生产纸浆质量等级,降低原木、二氧化氯和能源消耗量,减轻漂后废水的污染负荷,对于降低纸浆生产成本,保护水环境具有重要意义.     

Evaluation of the treatment efficiencies of paper mill whitewaters in terms of organic composition and toxicity

The efficiency of several lab scale treatments (aerobic, anaerobic and ozone or combination of these) was evaluated using two packaging board mill whitewaters. The effect of the different treatments on the elimination of the organic load, the chemical oxygen demand (COD) and the toxicity was tested as well as the relationship between these parameters. Biocides, phenolic compounds, surfactants, plasticiziers and wood extractives were identified in untreated and treated whitewaters by liquid chromatography coupled with mass spectrometry (LC-MS) or gas chromatography coupled with mass spectrometry (GC-MS). A strong dependency on the water type and treatment efficiency was observed, being the combination of anaerobic and aerobic treatments the best option to reduce the organic contaminants in these waters, although in some cases, the toxicity did not decrease. However, ozone as post-treatment permitted a further reduction of organic compounds, toxicity and COD.     

Multivariate Statistics of the Pyrolysis Products of High Molecular Components in Pulping Wastewaters to Explain Their Toxicity (6 pp)

Background, Aim and Scope At present, large-scale paper manufacture involves delignification and bleaching by elemental chlorine free (ECF) or totally chlorine free (TCF) processes. The wastewater is purified by secondary treatment (mechanical, chemical and biological) which removes most of the toxic substances from the discharge. However, we found residual toxicity in the high molecular (> 1000 D) matter (HMWM) of the discharge by test of the RET (reverse electronic transfer) inhibition. This fraction consists mainly of polydisperse lignin (LIG) and carbohydrate (CH) macromolecules. Structural units in these molecules are studied by pyrolysis gas chromatography / mass spectrometry (Pyr-GC/MS). In the present work, our aim was to find out those structural units which could explain the RET toxicity of LIG or CH molecules. We compared statistically RET toxicity values of the HMWM samples from treated wastewaters of pilot pulping experiments and intensity variation of the pyrolysis product gas chromatograms of these samples. This application is a novel study procedure. Methods Pyrolysis products (Py-GC/MS results) and inhibition of RET (reverse electronic transport toxicity) as TU50 and TU20 of HMWM (High Molecular Weight Material; Mw > 1000 D) were compared by multivariate statistics. The samples were from laboratory pilot stages of TCF (Totally Chlorine Free) and ECF (Elemental Chlorine Free) manufacture of softwood pulp. Py-GC/MS was done without and with addition of TMAH (Tetra Methyl Ammonium Hydroxide). The name and structure of each abundant fragment compound was identified from its retention time and mass spectrum compared to authentic reference compounds or literature. Four sets of Toxicity Units (TUs) and GC peak areas of the pyrolysis fragments were obtained. The data were normalized by division with LIG (lignin content of each sample). TU values were dependent and the fragment values independent (explanatory) variables in statistical treatments by SPSS system. Separate analyses of correlations, principal components (PCA) and stepwise multiple linear regression (SMLR) were performed from the four sample sets TCF and ECF with and without TMAH. Results and Discussion From the CH fragments, 2-furfural in TCF, and from the LIG fragments, styrene in ECF showed the highest probabilities to originate from source structures of toxicity. Other possible compounds in concern were indicated to be CH fragment 2-methyl-2-cyclopenten-1-one in ECF and LIG fragments 2-methoxy-4-methylphenol, 4,5-dimethoxy-2-methylphenol and 2-methylphenol in TCF.     

Levels of PCDDs and PCDFs in products and effluent from the Swedish pulp and paper industry and chloralkali process

Within the Swedish Dioxin Survey various samples from the pulp and paper industry and the chloralkali process have been analyzed by congener specific analytical methods. In addition to the generally discussed “bleaching pattern” of the tetrachlorinated congeners, these samples also contained higher chlorinated congeners like hexa-CDDs, hepta-CDFs, octa-CDD and octa-CDF. Consequently it is recommended that samples from the pulp industry should be analyzed for all PCDDs and PCDFs (tetra- through octa-). Counted as Nordic Toxic Equivalents (NTEQ), the recycled pulp samples had the highest contamination level followed by TMP, unbleached sulfite and bleached softwood and hardwood. In addition to the bleaching process, various chemicals used in the pulping, bleaching and wastewater treatment can contribute to the contamination.     

Photooxidant-forming monoterpenes in air plumes from kraft pulp industries

Monoterpenes emitted to air from two Swedish kraft (sulphate) pulp-mills were determined by sampling on the Tenax adsorbent followed by laboratory analysis using thermal desorption combined with high-resolution gas chromatography. The composition of the terpenes was found to be similar in the emissions from various parts of the process as well as in the mill plume. The bicyclic terpenes alpha-pinene and 3-carene, originating principally from wood of Scots pine (Pinus sylvestris), predominated among the thirteen assessed hydrocarbon monoterpenes. Terpinolene was the most prominent among the particularly reactive terpenes with a lifetime in ozone-rich air of only a few minutes. The rapid formation of photooxidants by chemical reactions of the terpenes with other components of the mill plume is discussed. It is concluded that a variety of phytotoxic photooxidants are formed which may contribute significantly to forest decline within 50 km of mills located along coasts.     

Effects of solar radiation on the fluorescence properties and molecular weight of fulvic acids from pulp mill effluents

The pulp and paper industry generates large volume of wastewater that adversely affects water resources. Lignin derived macromolecular compounds, similar to natural humic substances, are the main waste products in the pulp mill effluents. The UV-Vis and fluorescence spectroscopies were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. Solar irradiation of the solutions of these fulvic acids caused solution acidification and decay both in the UV-Vis absorbance and in the fluorescence. This decay was not the same for the whole spectra but pointed to the selective photodegradation of lignin typical structures. Furthermore, by sequential ultrafiltration it was found that during irradiation, the high-molecular weight fractions were destroyed and low-molecular-weight constituents, potentially more able to penetrate the cell membranes of living organisms were formed. Photodegradation of macromolecular organic matter from a kraft pulp mill effluent may be a key process occurring in natural waters that modifies the physicochemical properties of such effluents.     

Dissolution of resin acids, retene and wood sterols from contaminated lake sediments

The dissolution potency of hydrophobic resin acids (RAs), retene and wood sterols from sediments was studied. These wood extractives and their metabolites are sorbed from pulp and paper mill effluents to downstream sediments. With harmful components like these, sediments can pose a hazard to the aquatic environment. Therefore, sediment elutriates with water were produced under variable conditions (agitation rate and efficiency, time), and concentrations of the dissoluted compounds were analyzed. Both naturally contaminated field sediments and artificially spiked sediments were studied. By vigorous agitation RAs can be released fast from the sediment matrix and equilibrium reached within 3 days. Compared to RAs, desorption of retene from lake sediment was slower and did not completely reach equilibrium in 23 days. Sterols spiked to pristine sediment with a 33-day contact time desorbed faster than those associated authentically with industrial sediment of from a contaminated lake. Simulating the water turbulence adjacent to a sediment surface by low and high rate of agitation in the laboratory, an increase in the mixing rate after 43-day elutriation suddenly released a high amount of wood sterols. The results indicate wide variation between hazardous chemicals in their tendency to dissolution from sediment solids. Erosion and hydrology adjacent to the sediment surface, as well as risks from dredging activities of sediments, may expose lake biota to bioactive chemicals.     

Effects of tertiary treatment by fungi on organic compounds in a kraft pulp mill effluent

Background, aim and scope  

Pulp and paper mills generate a plethora of pollutants depending upon the type of pulping process. Efforts to mitigate the environmental impact of such effluents have been made by developing more effective biological treatment systems in terms of biochemical oxygen demand, chemical oxygen demand, colour and lignin content. This study is the first that reports an evaluation of the effects of a tertiary treatment by fungi (Pleurotus sajor caju, Trametes versicolor and Phanerochaete chrysosporium and Rhizopus oryzae) on individual organic compounds of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (final effluent).     

Spectroscopic changes on fulvic acids from a kraft pulp mill effluent caused by sun irradiation

Large volumes of wastewater with a high organic load are generated by the pulp and paper industry that negatively affect the quality of receiving waters. The main waste products in the pulp mill effluents are lignin derived macromolecular compounds, which are similar to natural humic substances and very resistant to wastewater treatments. Fulvic acids (FA) represent the higher percentage of these humic substances and it was observed that solar irradiation modify their properties. Several analytic tools, namely, UV–Visible, molecular fluorescence and FTIR spectroscopies, were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. It may be concluded that sun irradiation may alter to a high extent the physicochemical properties of macromolecular organic matter, namely fulvic acids, released by kraft pulp mill effluents. After solar exposition, the aromaticity decreases, the aliphatic structures become more oxygenated, and the fulvic acids from the pulp mill effluent remaining in solution are more similar to aquatic fulvic acids from non polluted sites.     

Spectroscopic changes on fulvic acids from a kraft pulp mill effluent caused by sun irradiation

Large volumes of wastewater with a high organic load are generated by the pulp and paper industry that negatively affect the quality of receiving waters. The main waste products in the pulp mill effluents are lignin derived macromolecular compounds, which are similar to natural humic substances and very resistant to wastewater treatments. Fulvic acids (FA) represent the higher percentage of these humic substances and it was observed that solar irradiation modify their properties. Several analytic tools, namely, UV–Visible, molecular fluorescence and FTIR spectroscopies, were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. It may be concluded that sun irradiation may alter to a high extent the physicochemical properties of macromolecular organic matter, namely fulvic acids, released by kraft pulp mill effluents. After solar exposition, the aromaticity decreases, the aliphatic structures become more oxygenated, and the fulvic acids from the pulp mill effluent remaining in solution are more similar to aquatic fulvic acids from non polluted sites.     

Size-exclusion chromatographic study of ECF and TCF softwood kraft pulp bleaching liquors

Background, aims, and scope  

Currently, elemental chlorine-free (ECF) and totally chlorine-free (TCF) bleaching systems are widely used for pulp production. Low and medium molecular weight lignin break-down products are known to have harmful effects on the environment. According to some recent results, also high molecular weight (HMW) material consisting mainly of lignin and carbohydrates may cause toxic effects to the environment. For these reasons, toxicity and structure studies of HMW materials are of great importance. This investigation is a part of a larger project to obtain more structure information of HMW materials and toxicity of ECF and TCF bleaching effluents. Size-exclusion chromatography (SEC) has been commonly used for the characterization of organic macromolecules such as lignin, but to our knowledge, no reports have appeared dealing with the comparison of SEC of ECF and TCF bleaching liquors. The aim of the present study was to get more information about the molecular weight distribution (MWD) of HMW fractions of waste liquors from ECF and TCF bleaching sequences by SEC.     

Comparative toxicity of effluents processed by different treatments in V79 fibroblasts and the algae Selenastrum capricornutum

The efficacy of ozonation and of photocatalysis processing in the treatment of pulp mill ECF (elementary chlorine free) bleaching and textile effluents was evaluated by determining total organic carbon reduction (TOC) and the toxicity. The chronic toxicity of the effluents was evaluated by the ability to inhibit the growth of algae Selenastrum capricornutum. Cultured hamster V79 fibroblasts were used to assess the cytotoxicity of effluents submitted to different detoxification processes. Two endpoints were measured in V79 cells: 3-(4,5-dimethylthiazole-2-yl)-2,5-biphenyl tetrazolium bromide (MTT) reduction and neutral red uptake (NRU). Both treatment processes were able to reduce the TOC, although ozonization was less effective for pulp mill ECF bleaching. The pulp mill ECF bleaching and textile effluents reduced the growth of S. capricornutum by 39% and 27%, respectively. However, at the highest concentration tested, the textile effluents treated by photochemical process for 60 min showed increased cytotoxicity in V79 cells compared to the untreated effluent when assessed by the NRU and MTT reduction assays (increases of 30% and 40%, respectively). Pulp mill ECF bleaching effluent treated by ozonization had a similar cytotoxicity to that of untreated effluent in the NRU assay. In contrast, the MTT reduction assay indicated that effluents treated with ozone were around 20% more cytotoxic than untreated effluents. These results show that cultured fibroblasts may be useful for studying cellular responses to pollutants and may be included in tests to monitor the efficiency of effluent detoxification processes.     

Betulinol and wood sterols in sediments contaminated by pulp and paper mill effluents: dissolution and spatial distribution

The goal was to determine dissolution potency of betulinol and wood sterols (WSs) from pulp and paper mill-contaminated sediments and the current stratification for assessment the load due to potential erosion in the river-like watercourse. Both compounds are wood extractives, which may be toxic to benthos and fish. This research continues a study in which other wood extractives, resin acids and their derivative, retene, were analysed. Sediments were collected from 1, 3.5, 12, 15, and 33 km downstream from the pulp and paper mills, and from 2 upstream reference sites. The dissolution potency into sediment–water elutriates (1?+?4?v/v) was studied by two agitation times and temperatures. The vertical amounts of extractives were determined from the uppermost 20 cm of sediment. The amounts of extractives potentially released were estimated from the sediment layers 0–2 and 2–5 cm by using spatial interpolation. According to the interpolation, the total amount of betulinol and β-sitosterol was calculated as kg/ha in the whole sediment area. Significant concentrations of betulinol (1,666 μg/g, dw) and WSs (2,886 μg/g, dw) were measured from the sediments. According spatial interpolation, the highest calculated amount of betulinol (4,726 kg/ha) and that of the most abundant WS, β-sitosterol (3,571 kg/ha), were in the lake where the effluents were discharged. In the dissolution experiment, the highest concentration of betulinol in sediment (0–10 cm) and elutriate was 412 μg/g (dw) and 165 μg/l, respectively. For WSs, concentrations were 768 μg/g (dw) in sediment and 273 μg/l in elutriate. In a worst-case scenario, betulinol may be desorbed to water in concentrations which are hazardous to aquatic animals. Instead WSs are not a risk in this study area. The amount of desorption varied depending on the concentration of contaminants in sediment, the nature of disturbance, and the sediment organic carbon content.     

Identification and level estimation of chlorinated neutral aromatic sulfur compounds and their alkylated derivatives in pulp mill effluents and sediments

Seven effluent samples from a modern pulp mill, in which chlorine and chlorine dioxide bleaching is used, and five sediment samples from the recipient watercourse were investigated for polychlorinated dibenzothiophenes (PCDBTs), polychlorinated thianthrenes (PCTAs), polychlorinated diphenylsulfides (PCDPSs) and for alkylated derivatives of these. Mainly di-, tri-, tetra- and pentachlorinated congeners were studied. Particles and filtrates from the effluents were analyzed separately. The concentration levels of the nonalkylated compounds were found to be higher in the filtrates than in the particles. Trichlorinated dibenzothiophenes and thianthrenes were found as the major congeners. Pentachlorinated derivatives were not found. Alkylated di- and trichlorodibenzothiophenes were detected in some samples, while alkylated chlorinated thianthrenes and diphenylsulfides were nondetectable. The estimated concentration levels of the compounds detected were in the range of 40–2700 pg/L in the pulp mill effluents and in the range of 2–40 pg/g dry weight in the sediments. Mixtures of methylated di- and trichlorodibenzothiophenes used as references in analyses were prepared from methylchlorobiphenyls. Some new pure model compounds were obtained by HPLC fractionation of the chlorination mixture of dibenzothiophene. Structures of these were determined by ¹H NMR.     

Formation of organochlorine compounds in kraft pulp bleaching processes

The most abundant volatile organochlorine compounds (VOCCs), trichloroacetic and dichloroacetic acids and AOX, were determined in bleaching effluent and waste water from three kraft pulp mills during ClO₂ bleaching. 0.6–7.7 g of VOCCs per ton bleached pulp were formed, the most abundant being chloroform and dichloroacetic acid methyl ester. Most of the VOCCs were removed during treatment, and it was estimated that 2–30 t of VOCCs would be removed annually from activated sludge treatment plants in Finnish kraft pulp mills using elemental chlorine free bleaching, most likely by volatilization. Dichloroacetic acid was formed in considerably higher amounts than trichloroacetic acid, and both compounds were removed effectively during treatment. The formation of all organochlorine compounds decreased considerably when non-chlorinated bleaching was employed.     

Conifer aphids in an air-polluted environment. II. Host plant quality

Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) seedlings were transported to five forest sites at increasing distances from a pulp mill emitting mainly SO(2). Levels of compounds which may have nutritional or defensive value for aphids on pine and spruce seedlings were studied. Glucose and fructose concentrations were significantly increased in pine and spruce needles near the pulp mill. There were no changes in sucrose and starch concentrations. In pine shoots, total free amino acid concentration and the concentrations of ornithine, lysine, histidine and arginine were significantly negatively correlated with the distance from the pulp mill, while in spruce only the individual amino acids glycine, ornithine, lysine and histidine showed a significant negative correlation with distance. There were no changes in total phenolic, catechin, total monoterpene and total resin acid concentrations. However, in pine seedlings monoterpenes beta-pinene and sabinene and in spruce seedlings resin acid palustric acid were significantly correlated with the distance from the pulp mill. The results indicate that SO(2) disturbs carbohydrate metabolism in spruce and pine seedlings. The elevated concentrations of arginine may be the result of the combinations of SO(2), NO(3) and NH(3) emissions of the pulp mill. The emissions did not have any impact on total amounts of defensive substances in trees. Thus, the possible susceptibility of conifers to herbivores appears to be due to changes in nutritive value rather than to reduced chemical resistance.     

Environmental and industrial factors relating to flavor tainting of fish in the upper Wisconsin river

Extracts from Large Toothed Aspen (Populous grandidenta Michx.) and Jack Pine (Pinus banksiana Lamb.) contained many odor compounds found in flavor-tainted walleye from the Wisconsin River, including alkylphenols. Aspen wood contained 8 ppb of 2-isopropylphenol, and river sediments also contained low ppb levels of many alkylphenols, including 2-isopropylphenol. Thiophenol and thiocresol which sporadically cause offensive sulfury taints in Wisconsin River fish were also found in river sediment. Quantitative analysis of fish for alkylphenols supported a hypothesis involving a food chain-mediated seasonal fluctuation of alkylphenol levels in fish. Thiophenols are postulated to be derived from pulp mill activities on the river.     

Sulphur Gas Analysis in the Pulp and Paper Industry

Various techniques of determining total reduced sulphur (TRS) gases that are emitted in the manufacture of pulp and paper, particularly in the kraft pulping process, are reviewed. Particular emphasis is placed on two types of popular TRS analyzers used in Canada, viz. coulometers and gas chromatographs, with a discussion on the automation of the latter.     

Identification and quantification of chlorinated bisphenol A in wastewater from wastepaper recycling plants

Chlorinated derivatives of bisphenol A were detected in the final effluents of eight paper manufacturing plants in Shizuoka, Japan, where thermal paper and/or other printed paper is used as the raw material. Their amounts were determined by gas chromatography/mass spectrometry (GC/MS) after treatment with N, O-bis(trimethylsilyl)trifluoroacetamide, and ranged from traces to 2.0 microg/l. They are likely produced by chlorination of bisphenol A, which was released into the effluents from the pulping process of wastepaper, during or after bleaching with chlorine.     

Characterization of carbonaceous combustion residues: II. Nonpolar organic compounds

Aromatic and aliphatic fractions of black carbon (BC) solvent extracts were examined by gas chromatography/mass spectrometry to determine how differences in broad chemical and physical features are correlated with the load, composition, "extractability" and bioavailability of organic compounds. Diesel soot, urban dust and chimney soot had concentrations of n-alkanes >20 microg/g and of carcinogenic polycyclic aromatic hydrocarbons (PAHs)>8 microg/g. These high levels of solvent-extractable compounds were interpreted as resulting from combustion at temperatures below optimum values for BC formation. PAH concentrations normalized to the amount of soot carbon in chimney soot were close to values for diesel soot. However, the high proportion of polar amorphous organic matter in chimney soot suggests a higher bioavailability for associated PAHs. Carbon black, vegetation fire residues, and straw and wood charcoals had only residual concentrations of n-alkanes (<9 microg/g) and PAHs (<0.2 microg/g). PAH distributions were mostly unspecific, while the overall signature of the aliphatic fraction varied with BC origin. Molecular markers among plant-derived BC included steroid and sesquiterpenoid hydrocarbons. Molecular fingerprints suggest that compounds associated with fossil BC might be more refractory than those associated with plant-derived BC.