Sources of priority substances entering an urban wastewater catchment--trace organic chemicals

The implementation of new legislation such as the Water Framework Directive (WFD) requires Member States to gain a better understanding of priority substances entering surface waters. This will include inputs from wastewater treatment works as well as from other urban, industrial and agricultural sources. There is currently a lack of available data regarding the magnitude and sources of organic priority substances entering treatment works. As a consequence the concentrations of organic priority substances including PAHs, surfactants, polybrominated diphenylethers (PBDEs), diethylhexyl phthalate (DEHP), pesticides and solvents were determined in the wastewater from an urban catchment located in the UK, as part of a project undertaken for UK Water Industry Research (UKWIR). Most organic priority substances were detected in the microg/l range. Significant variations in the concentration of linear alkylbenzene sulphonate (LAS), DEHP, PBDEs and nonylphenol ethoxylates (NPEOs), in particular, were observed for the different sources. The greatest differences were evident between new and older domestic discharges. Solvent levels varied considerably reflecting use and production within the catchment. Chloroform levels were highest in domestic effluent, while trichloroethene and tetrachloroethene were detected only in commercial samples.     

Distribution,sources, and risk assessment of polycyclic aromatic hydrocarbons (PAHs) in surface water in industrial affected areas of the Three Gorges Reservoir,China

Water samples were collected from wastewater treatment plant (WWTP), drain water (DW), major tributaries (MT), and main course of the Yangtze River (MY) in areas of three industrial parks (IPs) in Chongqing city in the Three Gorges Reservoir (TGR). Sixteen EPA priority polycyclic aromatic hydrocarbon (PAH) pollutants were quantified to identify the effects of industrial activities on water quality of the TGR. The results showed that 11 individual PAHs were quantified and 5 PAHs (naphthalene (Nap), acenaphthylene (Acy), benzo[k]fluoranthene (BkF), indeno[1,2,3-cd]pyrene (InP), and benzo[g,h,i]perylene (BgP)) were under detection limits in all of the water samples. Three-ring and four-ring PAHs were the most detected PAHs. Concentrations of individual PAHs were in the range of not detected (nd) to 24.3 ng/L. Total PAH concentrations for each site ranged from nd to 42.9 ng/L and were lower compared to those in other studies. The mean PAH concentrations for sites WWTP, DW, MT, and MY showed as follows: DW (25.9 ng/L) > MY (15.5 ng/L) > MT (14.0 ng/L) > WWTP (9.3 ng/L), and DW contains the highest PAH concentrations. Source identification ratios showed that petroleum and combustion of biomass coal and petroleum were the main sources of PAHs. The results of potential ecosystem risk assessment indicated that, although PAH concentrations in MT and MY are likely harmless to ecosystem, contaminations of PAHs in DW were listed as middle levels and some management strategies and remediation actions, like strengthen clean production processes and banning illegal sewage discharging activities, etc., should be taken to lighten the ecosystem risk caused by PAHs especially risks caused by water discharging drains.     

Source identification and risk assessment of heavy metal contaminations in urban soils of Changsha,a mine-impacted city in Southern China

The urban soils suffered seriously from heavy metal pollutions with rapid industrialization and urbanization in China. In this study, 54 urban soil samples were collected from Changsha, a mine-impacted city located in Southern China. The concentrations of heavy metals (As, Cd, Co, Cu, Mn, Ni, Pb, and Zn) were determined by ICP-MS. The pollution sources of heavy metals were discriminated and identified by the combination of multivariate statistical and geostatistical methods. Four main sources were identified according to the results of hierarchical cluster analysis (HCA), principal component analysis (PCA), and spatial distribution patterns. Co and Mn were primarily derived from soil parent material. Cu, Pb, and Zn with significant positive relationships were associated with mining activities and traffic emissions. Cd and Ni might be affected by commercial activities and industrial discharges. As isolated into a single group was considered to have correlation with coal combustion and waste incineration. Risk assessment of heavy metals in urban soils indicated an overall moderate potential ecological risk in the urban region of Changsha.     

Towards the characterisation of heavy metals in dredged canal sediments and an appreciation of 'availability': two examples from the UK.

Canal sediments can act as sinks for a wide range of contaminants including heavy metals from various sources (e.g. industrial and waste water discharges). Dredging of canals is required to maintain navigational depth and prevent flooding. The sediments removed from canals are often disposed of to land, being deposited either straight on to the banks of the canal or, in recent years, in licensed disposal sites. The aim of this work was to investigate the nature of dredged sediment-derived soils and the heavy metals present in them. Two disposal sites in the United Kingdom (UK) were investigated and soil samples taken. A variety of analytical techniques were used, including Aqua regia digestion and sequential extraction, in order to assess the concentrations and associations of metals present. Diethylene triaminepenta-acetic acid extracts, performed to illustrate plant-available metal concentrations, reveal that up to 40% of the total extracted metals were in an 'available' form. Variations in metal concentrations with depth in the soil cores show a significant correlation with total organic carbon content.     

Conservative heavy metal total discharge schemes

Currently, according to Taiwan’s Water Pollution Control Act, the environmental control of waterbodies and water quality depends on the effluent standards and the standard of water quality in the rivers. The Act demands that each stationary pollution source comply with the effluent standard before being discharged into the rivers, and that the overall water quality in the river shall not exceed the declared standard of water quality. To improve the condition of the waterbodies and water quality of the rivers, the Environmental Protection Administration (EPA) in Taiwan has made stricter regulations concerning the discharge standard. Such regulations will help to reduce the weight of individual pollutants discharged; the discharged wastewater, however, will still gradually worsen the water quality of the rivers even after complying with the effluent standard since some of the pollutant dischargers may decrease the concentration of pollutants by diluting the water before discharging; thus, the total weight of metals discharged in the rivers will not be reduced, and the water quality in the areas where the pollutant sources are concentrated will not thereby be significantly improved. To protect the irrigation water and farmlands from being polluted by discharged heavy metals in industrial wastewater, the EPA started controlling the sources in accordance with the total quantity control (TQC) as defined in the Water Pollution Control Act, in the hope of perfecting the environmental protection of waterbodies and water quality, as well as ensuring clean water sources without any pollution for the rivers, land, and people.     

Perfluorochemicals in wastewater treatment plants and sediments in Hong Kong

The study reported in this paper examined the concentrations of nineteen perfluorochemicals (PFCs), including perfluoroalkyl sulfonates, carboxylates, and sulfonamides in samples collected from Hong Kong wastewater treatment plants (WWTPs) and sediments. The study was the first to use an external isolator column to assist in the quantification of PFCs in environmental samples without having to make internal modifications to a liquid chromatography system. Perfluorooctanesulfonate was found to be the dominant PFC pollutant in Hong Kong, and the WWTP sludge was the major sink of PFCs discharged from the urban areas. Compared to discharge influenced by industrial activities, much less perfluorooctanoate was found in waste streams. The significantly lower level of perfluorodecanesulfonate in WWTP sludge reflects the important influence of consumer products on PFC distribution. The dominance of even-chain length perfluoroalkyl carboxylates in all of the WWTP sludge samples investigated further suggests the strong aerobic degradation of fluorotelomer alcohols in WWTPs.     

Dissolved heavy metal concentrations of the Kralkızı, Dicle and Batman dam reservoirs in the Tigris River basin,Turkey

Water samples were collected at monthly intervals during 1 year of monitoring from Kralk?z?, Dicle and Batman dam reservoirs in the Tigris River basin to assess the concentrations of dissolved heavy metals and to determine their spatial and seasonal variations. The results indicated that dissolved heavy metal concentrations in the reservoirs were very low, reflecting the natural background levels. The lowest total metal concentrations in the three dam reservoirs were detected at sampling sites close to the dam wall. However, the highest total concentrations were observed at sites, which are located at the entrance of the streams to the reservoirs. Fe, Cr and Ni were the most abundant elements in the reservoirs, whereas Cd and As were the less abundant. The mean concentrations of dissolved metals in the dam reservoirs never exceeded the maximum permitted concentrations established by EC (European Community), WHO and USEPA drinking water quality guidelines. All heavy metals showed significant seasonal variations. As, Cd, Cr, Cu, Fe, Ni and Pb displayed higher values in the dry season, while higher values for Zn in the wet season. Cluster analysis grouped all ten sampling sites into three clusters. Clusters 1 and 2, and cluster 3 corresponded to relatively low polluted and moderate polluted regions, respectively. PCA/FA demonstrated the dissolved metals in the dam reservoirs controlled by natural sources.     

Meta-analysis of environmental contamination by alkylphenols

Alkylphenols and alkylphenol ethoxylates (APE) are toxics classified as endocrine-disrupting compounds; they are used in detergents, paints, herbicides, pesticides, emulsifiers, wetting and dispersing agents, antistatic agents, demulsifiers, and solubilizers. Many studies have reported the occurrence of alkylphenols in different environmental matrices, though none of these studies have yet to establish a comprehensive overview of such compounds in the water cycle within an urban environment. This review summarizes APE concentrations for all environmental media throughout the water cycle, from the atmosphere to receiving waters. Once the occurrence of compounds has been assessed for each environmental compartment (urban wastewater, wastewater treatment plants [WWTP], atmosphere, and the natural environment), data are examined in order to understand the fate of APE in the environment and establish their geographical and historical trends. From this database, it is clear that the environment in Europe is much more contaminated by APE compared to North America and developing countries, although these APE levels have been decreasing in the last decade. APE concentrations in the WWTP effluent of developed countries have decreased by a factor of 100 over the past 30?years. This study is aimed at identifying both the correlations existing between environmental compartments and the processes that influence the fate and transport of these contaminants in the environment. In industrial countries, the concentrations observed in waterways now represent the background level of contamination, which provides evidence of a past diffuse pollution in these countries, whereas sediment analyses conducted in developing countries show an increase in APE content over the last several years. Finally, similar trends have been observed in samples drawn from Europe and North America.     

PCDD/F, PAH and heavy metals in the sewage sludge from six wastewater treatment plants in Beijing, China

In order to better understand land application of sewage sludge, the characterization of heavy metals, PCDD/F and PAHs in sewage sludge was investigated from six different wastewater treatment plants (WWTP) in Beijing City, China. It was found that the total concentrations of Zn in Wujiacun (WJC) sewage sludge, and Cd and Hg in sewage sludge generated from all of the six different places are higher than Chinese regulation limit of pollutants for sludge to be used for agriculture (GB18918-2002). The levels of 16 PAHs that have been categorized as priority pollutants by US EPA in the sewage sludge samples varied from 2467 to 25923 microg/kg (dry weight), the highest values of 25923 microg/kg being found in WJC WWTP. The concentrations of Benzo[a]pyrene were as high as 6.1mg/kg dry weight in WJC sewage sludge, exceeding the maximum permitted content by GB18918-2002. Individual PAH content varies considerably with sewage samples. The ratios of anthracene to anthracene plus phenanthrene (An/178), benz[a]anthracene to benz[a]anthracene plus chrysene (BaA/228), indene[1,2,3-cd]pyrene to indene[1,2,3-cd]pyrene plus benzo[g,h,i]perylene (In/In+BP), and fluoranthene to fluoranthene plus pyrene (Fl/Fl+Py) suggest that petroleum and combustion of fossil fuel were the dominant contributions for the PAHs in sewage sludge. The concentrations of total PCDD/F in the sewage sludge ranged from 330 to 4245 pg/g d.w. The toxicity equivalent concentrations is between 3.47-88.24 pg I-TEQ according to NATO/CCMS, which is below Chinese legislation limit value proposed for land application. The PCDD/F congener/homologue profiles found in the Beijing samples indicated that the high chlorinated PCDD/F contamination might originate mainly from PCP-related source and depositional sources while the low chlorinated PCDD/F homologues could be originating from incineration or coal combustion. The major source of PCDD/Fs in Beijing sludge is still unclear.     

Occurrence and possible sources of polychlorinated biphenyls in surface sediments from the Wuhan reach of the Yangtze River, China

Twenty-seven surface sediment samples were collected from the mainstream and eight tributaries of the Wuhan reach of the Yangtze River, China, in 2005, in order to assess the distribution, possible sources, and potential risk of polychlorinated biphenyls (PCBs) in the environment. The total concentrations of PCBs (the sum of 39 congeners) ranged from 1.2 to 45.1 ng g⁻¹ dry weight, with a mean value of 9.2 ng g⁻¹. Sediment samples with the highest PCB concentrations came from the tributary sites, which are closer to PCB sources. Conversely, PCB concentrations in the sediment from the mainstream sites of Yangtze River were relatively low. The observed PCB levels were higher than those found in the sediments of other rivers in China, but lower than those in river sediments from other urban areas and harbors around the world. Low-chlorinated PCBs, dominated by tetra-PCBs and penta-PCBs, were identified as being prevalent in the surface sediments. Correlation analyses between the PCBs and the geochemistry and heavy metal content of the sediments suggest that the washing of these compounds from the land into the river by floods and heavy rains, or industrial wastewater and domestic sewage, may be the major sources of the PCBs. According to established sediment quality guidelines, the risk of adverse biological effects from the levels of PCBs recorded at most of the studied sites should be insignificant, although the higher concentrations at other sites could cause acute biological damage.     

Analysis of chemical contamination within a canal in a Mexican border colonia

This study examines urban pollution within Derechos Humanos, a colonia popular in Matamoros, Tamaulipas, Mexico. General water quality indicators (coliform bacteria, total dissolved solids, ecologically relevant cations and anions), heavy metals (copper, lead, nickel, zinc, iron and cadmium), and volatile organic compounds (benzene, toluene, ethylbenzene, styrene, and dichlorobenzene and xylene isomers) were quantified within a wastewater canal running adjacent to the community. Water samples were collected at multiple sites along the banks of the canal and evidence of anthropogenic emissions existed at each sampling location. Sample site 2, approximately 10 m upstream of the colonia, contained both the widest range of hazardous pollutants and the greatest number exceeding US Environmental Protection Agency surface water standards. At each sampling location, high concentrations of total coliform (> 10(4) colonies/100 mL sample), lead (ranging from 0.05 to 0.40 mg/L), nickel (levels from 0.21 to 1.45 mg/L), and benzene (up to 9.80 mg/L) were noted.     

Occurrence and sources of antibiotics and their metabolites in river water, WWTPs, and swine wastewater in Jiulongjiang River basin, south China

In this study, the occurrence and sources of five cataloged antibiotics and metabolites were studied in Jiulongjiang River basin, south China. Nineteen antibiotics and 13 metabolites were detected in water samples from 16 river sampling sites, wastewater from 5 swine-raising facilities, and effluent from 5 wastewater treatment plants (WWTPs). The results showed that 12 antibiotics and 6 metabolites were detected in river water samples. Sulfonamides (SAs) and their metabolites were detected at high concentrations (8.59–158.94 ng/L). Tetracyclines (TCs) and their metabolites were frequently detected in swine wastewater, and the maximum concentration was up to the level in milligram per liter. Macrolides (MLs) and β-lactams (β-Ls) were found in all WWTP effluent samples and some river samples, while they were never found in any of the swine wastewater samples. SAs and quinolones (QNs) were detected in all samples. Hierarchical cluster analysis of 16 surface water samples was applied to achieve the spatial distribution characteristics of antibiotics in the Jiulongjiang River. As a result, two categories were obviously obtained. Principal component analysis and redundancy analysis showed that TCs and SAs as well as their metabolites were the major antibiotics in Jiulongjiang River, and they mainly originated from swine wastewater, while the QNs, MLs, and β-Ls in the Jiulongjiang River came from WWTP effluent.     

Determination of heavy metals in roadside soil from Sapanca Area Highway, Turkey

This paper describes the determination of lead and nickel in soil samples from Kinali-Sakarya highway side, near Lake Sapanca. Lake Sapanca is the drinking water source for Sakarya city and its environment. This highway runs between Ankara and Istanbul and carries a heavy traffic volume. Soil samples were taken from different distances from the highway once every two months for a year. Three sampling sites are distinguished, located in areas characterised by heavy traffic volumes but away from industrial pollution sources. In the solutions obtained by dissolving each soil sample, the metals are determined by using flame atomic absorption spectrometry. Lead and nickel concentrations ranged from 0.0 to 47.54 and from 0.0 to 58.67 mg/kg, respectively. Nickel accumulations are lower than the world standard, but lead accumulations are above acceptable limit values. The highest lead levels were observed during September, November and March.     

Contributions of heavy metals from municipal runoff to the sediments of Lake Pontchartrain, Louisiana

A study was conducted to determine the distribution and sources of heavy metal pollutants in the sediments of Lake Pontchartrain. Sediment samples were collected from the northern and southern shorelines and analyzed for heavy metals by atomic absorption spectrometry. The heavy metals of interest were barium, copper, nickel, lead, and zinc. The concentrations of these metals indicate that the principal source of heavy metal pollution is associated with urban stormwater runoff and municipal discharges.     

Heavy metals in soils from a typical industrial area in Sichuan,China: spatial distribution,source identification,and ecological risk assessment

Anthropogenic activities could result in increasing concentrations of heavy metals in soil and deteriorating in soil environmental quality. Topsoil samples from a typical industrial area, Shiting River Valley, Sichuan, Southwest China, were collected and determined for the concentrations of Cu, Zn, Cr, Cd, As, and Hg. The mean concentrations of these metals were lower than the national threshold values, but were slightly higher than their corresponding background values, indicating enrichment of these metals in soils in the valley, especially for Cu, Zn, and Hg. The topsoils in this area demonstrated moderate pollution and low potential ecological risk. Principal component analysis coupled with cluster analysis was applied to analyze the data and identified possible sources of these heavy metals; the results showed that soil Cd, Hg, As, Cu, and Zn were predominantly controlled by human activities, whereas Cr was mainly from the parent material. The spatial distribution of the heavy metals varied distinctly and was closely correlated to local anthropogenic activities. Furthermore, the concentrations of heavy metals in the industrial land demonstrated relatively higher levels than those of other land use patterns. Soil metal concentrations decreased with the distance increase from the traffic highway (0–1.0 km) and water system (0–2.0 km). Additionally, soil properties, especially pH and soil organic matter, were found to be important factors in the distribution and composition of metals.     

Assessment of heavy metal pollution in surface soils of urban parks in Beijing, China

Assessing the concentration of potentially harmful heavy metals in the soil of urban parks is imperative in order to evaluate the potential risks to residents and tourists. To date, little research on soil pollution in China's urban parks has been conducted. To identify the concentrations and sources of heavy metals, and to assess the soil environmental quality, samples were collected from 30 urban parks located in the city of Beijing. Subsequently, the concentrations of Cu, Ni, Pb and Zn in the samples were analyzed. The investigation revealed that the accumulations of Cu and Pb were readily apparent in the soils. The integrated pollution index (IPI) of these four metals ranged from 0.97 to 9.21, with the highest IPI in the densely populated historic center district (HCD). Using multivariate statistic approaches (principal components analysis and hierarchical cluster analysis), two factors controlling the heavy metal variability were obtained, which accounted for nearly 80% of the total variance. Nickel and Zn levels were controlled by parent material in the soils, whereas Cu, Pb and, in part, Zn were accounted for mainly by anthropogenic activities. The findings presented here indicate that the location and the age of the park are important factors in determining the extent of heavy metal, particularly Cu and Pb, pollution. In addition, the accumulation of Zn did not appear to reach pollution levels, and no obvious pollution by Ni was observed in the soils of the parks in Beijing.     

Impact of industrial and mine drainage wastes on the heavy metal distribution in the drainage basin and estuary of the Sado River (Portugal)

This paper presents results from a survey of the heavy metal distribution in sediments in the drainage basin and estuary of the Sado River (Portugal). In the drainage basin, heavy metals originate mostly from pyrite outcrop erosion and mining activities (Cd, Zn, Cu and locally Hg, Pg), and also from crust erosion (Sn, Ni, Ti, Zr). These sources are not correlated with the particulate organic carbon (POC) and so the metals are thought to be in inorganic forms in this area. Anthropogenic heavy metal sources (urban and industrial) are found in the lower estuary (Sn, Cd, Hg, Zn, Pb and Cu) along with high POC concentrations. In this zone, these metals are thought to be strongly adsorbed onto organic particles. Furthermore, organo-metallic species are likely to be present, as demonstrated in the case of Sn, since methyl- and butyl-tin species were detected in sediments from this area. This suggests the need for the detection of organo-metallic species to understand the heavy metal geochemical cycles. No long-term changes in metal concentrations are found in sediment cores, except in the middle estuary (Zn, Cu) due to the development of mining activities on an industrial scale in the 1860s.     

Determination of potential sources of PCBs and PBDEs in sediments of the Niagara River

Sediments from Niagara River, an important waterway connecting two of the Great Lakes (Lake Erie to Lake Ontario), were analyzed for 14 congeners of polychlorinated biphenyls (PCBs) and 9 congeners of polybrominated diphenyl ethers (PBDEs) using accelerated solvent extraction and gas chromatography/mass spectrometry. Total concentrations of PCBs ranged from 1.7 to 124.6 ng/g were PCBs 138 and 153 were found in all samples. All sites but one showed PBDE in sediments with total concentrations as high as 148 ng/g, suggesting that PBDE is becoming an important class of POP. A land-use and coverage map was used to trace potential localized sources of PCB and PBDE contamination. Results indicate that the highest levels of PCBs and PBDEs were found in sediments collected from areas closest to the discharge locations of municipal wastewater treatment plants (WWTP) and local industries. This is the first study that suggests the importance of WWTP discharges as a potential source of PBDE contamination in the Great Lakes.     

Irrigation of certain Mediterranean plants with heavy metals

The ability of some Mediterranean plant species to absorb heavy metals present in wastewater from treatment plants is researched. Their tolerance to high concentrations of heavy metals is also assessed. Myoporum sp., Nerium oleander and Geranium sp. were irrigated with wastewater, normal irrigation water, and irrigation water enriched with metals. The concentration of metals in the wastewater, irrigation water, in the soil, and in the leaves, tissues and roots of the plants were measured. The results show that treatment of plants with wastewater gives slightly increased concentrations of metals in leaves and roots. In contrast, irrigation with high concentrations of Cu₂₊, Mn₂₊ and Zn₂₊ (up to 1000 mg/1) resulted to significantly higher concentrations of these metals in the roots than in the leaves. However, all plants have been shown to tolerate high concentrations of heavy metals except Nerium oleander, which exhibited strong toxicity in leaves. The tolerance of these Mediterranean plant species to polluted environments allows them to be irrigated by wastewater from treatment plants, so as to achieve the best environmental rehabilitation of desertified Mediterranean areas.     

Using trace element concentrations in Corbicula fluminea to identify potential sources of contamination in an urban river

We used the biomonitor, Corbicula fluminea, to investigate the contributions of trace elements associated with different point sources and land uses in a large river. Trace elements were analyzed in tissues of clams collected from 15 tributary streams draining five land use or point source types: agriculture, forest, urban, coal-fired power plant (CFPP), and wastewater (WWTP). Clams from forested catchments had elevated Hg concentrations, and concentrations of arsenic and selenium were highest (5.0+/-0.2 and 13.6+/-0.9 microg g(-1) dry mass (DM), respectively) in clams from CFPP sites. Cadmium concentrations were significantly higher in clams from urban and CFPP sites (4.1+/-0.2 and 3.6+/-0.9 microg g(-1) DM, respectively). Non-metric multidimensional scaling (NMS) of tissue concentrations in clams clustered at CFPP and forest/agriculture sites at opposite ends of the ordination space, and the distribution of sites was driven by Cu, Zn, Cd, and Hg.