Piggery: From environmental pollution to a climate change solution

Pig farms are a vital component of rural economies in Australia. However, disposal of effluent leads to many environmental problems. This case study of the Berrybank Farm piggery waste management system in Victoria estimates greenhouse gas (GHG) benefits from three different activities. Analysis reveals that the capturing and combusting of methane from piggery effluent could save between 4859 and 5840 tCO₂e yr^{? 1} of GHG emissions. Similarly, using methane for replacing fuels for electricity generation could save another 800 tCO₂e yr^{? 1}of GHGs. Likewise, by utilizing the biogas wastes to replace inorganic fertilizers there could be a further saving of 1193 to 1375 tCO₂e yr^{? 1} of GHG, depending on the type of fertilizers the waste replaces. Therefore, a well-managed piggery farm with 15,000 pigs could save 6,852 to 8,015 tCO₂e yr^{? 1}, which equates to the carbon sequestrated from 6,800 to 8,000 spotted gum trees (age = 35 year) in their above plus below-ground biomass. Implementation of similar project in suitable areas in Australia could have significant environmental and financial benefits.     

Benefits of clean development mechanism application on the life cycle assessment perspective: a case study in the palm oil industry

This study performed an assessment on the beneficial of the Clean Development Mechanism (CDM) application on waste treatment system in a local palm oil industry in Malaysia. Life cycle assessment (LCA) was conducted to assess the environmental impacts of the greenhouse gas (GHG) reduction from the CDM application. Calculations on the emission reduction used the methodology based on AM002 (Avoided Wastewater and On-site Energy Use Emissions in the Industrial Sector) Version 4 published by United Nations Framework Convention on Climate Change (UNFCC). The results from the studies showed that the introduction of CDM in the palm oil mill through conversion of the captured biogas from palm oil mill effluent (POME) treatment into power generation were able to reduce approximate 0.12 tonnes CO2 equivalent concentration (tCO2e) emission and 30 kW x hr power generation per 1 tonne of fresh fruit bunch processed. Thus, the application of CDM methodology on palm oil mill wastewater treatment was able to reduce up to 1/4 of the overall environment impact generated in palm oil mill.     

Full-scale experience for nitrogen removal from piggery waste.

The nitrogen-removal performances of three full-scale piggery wastewater treatment plants, with different organic and nitrogen loads, at the capacity ranges of 95 to 130 m3/d, were compared in this study. Plants 1 and 2 can be characterized as the modification of anoxic-aerobic operating systems, while an anaerobic and anoxic-aerobic system was used in plant 3. The influent piggery wastewater concentration for plant 1 was relatively lower, but with higher organic and nitrogen loads, resulting in higher chemical oxygen demand (COD) and ammonium-nitrogen in effluent. Plant 2 was operated with strong piggery wastewater, resulting in a higher operating temperature. The high temperature could inhibit the nitrifying activity in plant 2. Although plant 3 was operated with a higher influent total COD-to-total Kjeldahl nitrogen ratio (TCOD:TKN), an additional external carbon source was required to polish the final effluent to remove nitrogen. Influent COD in plant 3 was used in the anaerobic-anoxic reactor for both methane (CH4) production and denitrification. Based on various mass balances, including caloric, COD, and alkalinity, the key elements for the successful nitrogen removal from the piggery waste were reactor temperature (less than 35degrees C), influent TCOD:TKN (greater than 6), and alkalinity-to-TKN ratio (greater than 3).     

Preliminary investigation of greenhouse gas emissions from the environmental sector in Taiwan

The United Nations Framework Conventions on Climate Change (UNFCCC) asks their Parties to submit a National Inventory Report (NIR) for greenhouse gas (GHG) emissions on an annual basis. However, when many countries are quickly growing their economy, resulting in substantial GHG emissions, their inventory reporting systems either have not been established or been able to be linked to planning of mitigation measures at national administration levels. The present research was aimed to quantify the GHG emissions from an environmental sector in Taiwan and also to establish a linkage between the developed inventories and development of mitigation plans. The "environmental sector" consists of public service under jurisdiction of the Taiwan Environmental Protection Administration: landfilling, composting, waste transportation, wastewater treatment, night soil treatment, and solid waste incineration. The preliminary results were compared with that of the United States, Germany, Japan, United Kingdom, and Korea, considering the gaps in the scopes of the sectors. The GHG emissions from the Taiwanese environmental sector were mostly estimated by following the default methodology in the Intergovernmental Panel on Climate Change guideline, except that of night soil treatment and waste transportation that were modified or newly developed. The GHG emissions from the environmental sectors in 2004 were 10,225 kilotons of CO2 equivalent (kt CO2 Eq.). Landfilling (48.86%), solid waste incineration (27%), and wastewater treatment (21.5%) were the major contributors. Methane was the most significant GHG (70.6%), followed by carbon dioxide (27.8%) and nitrous oxide (1.6%). In summary, the GHG emissions estimated for the environmental sector in Taiwan provided reasonable preliminary results that were consistent and comparable with the existing authorized data. On the basis of the inventory results and the comparisons with the other countries, recommendations of mitigation plans were made, including wastewater and solid waste recycling, methane recovery for energy, and waste reduction/sorting.     

Greenhouse gas production and efficiency of planted and artificially aerated constructed wetlands

Greenhouse gas (GHG) emissions by constructed wetlands (CWs) could mitigate the environmental benefits of nutrient removal in these man-made ecosystems. We studied the effect of 3 different macrophyte species and artificial aeration on the rates of nitrous oxide (N₂O), carbon dioxide (CO₂) and methane (CH₄) production in CW mesocosms over three seasons. CW emitted 2-10 times more GHG than natural wetlands. Overall, CH₄ was the most important GHG emitted in unplanted treatments. Oxygen availability through artificial aeration reduced CH₄ fluxes. Plant presence also decreased CH₄ fluxes but favoured CO₂ production. Nitrous oxide had a minor contribution to global warming potential (GWP < 15%). The introduction of oxygen through artificial aeration combined with plant presence, particularly Typha angustifolia, had the overall best performance among the treatments tested in this study, including lowest GWP, greatest nutrient removal, and best hydraulic properties.     

The effectiveness of lime-based amendments and bauxite residues at removing phosphorus from piggery effluent

Piggery effluent may contribute to the eutrophication of waterways, if it is not treated before disposal, because of high levels of phosphorus. Limes and red muds (a residue from bauxite refining) were used to remove phosphorus from piggery effluent (41 mg litre(-1) total P). Lime-based amendments were more effective than the red muds at removing phosphorus when compared at the same liquid: solid ratios. Based on laboratory data, the cost of treating effluent increased rapidly as the final required phosphorus concentration decreased to less than 4 mg litre(-1). Kiln dust was the cheapest amendment tested down to 2 mg litre(-1). Hydrated lime was able to clarify and flocculate the effluent to 1 mg litre(-1) within 60 min. The re-useability of all limes may be determined by a simple pH test. Red mud could be used to remove phosphorus when its pH was lowered to 6.0-6.5 and it is used at liquid:solid ratios <20:1.     

Greenhouse gas emissions from waste management--assessment of quantification methods

Of the many sources of urban greenhouse gas (GHG) emissions, solid waste is the only one for which management decisions are undertaken primarily by municipal governments themselves and is hence often the largest component of cities' corporate inventories. It is essential that decision-makers select an appropriate quantification methodology and have an appreciation of methodological strengths and shortcomings. This work compares four different waste emissions quantification methods, including Intergovernmental Panel on Climate Change (IPCC) 1996 guidelines, IPCC 2006 guidelines, U.S. Environmental Protection Agency (EPA) Waste Reduction Model (WARM), and the Federation of Canadian Municipalities-Partners for Climate Protection (FCM-PCP) quantification tool. Waste disposal data for the greater Toronto area (GTA) in 2005 are used for all methodologies; treatment options (including landfill, incineration, compost, and anaerobic digestion) are examined where available in methodologies. Landfill was shown to be the greatest source of GHG emissions, contributing more than three-quarters of total emissions associated with waste management. Results from the different landfill gas (LFG) quantification approaches ranged from an emissions source of 557 kt carbon dioxide equivalents (CO2e) (FCM-PCP) to a carbon sink of -53 kt CO2e (EPA WARM). Similar values were obtained between IPCC approaches. The IPCC 2006 method was found to be more appropriate for inventorying applications because it uses a waste-in-place (WIP) approach, rather than a methane commitment (MC) approach, despite perceived onerous data requirements for WIP. MC approaches were found to be useful from a planning standpoint; however, uncertainty associated with their projections of future parameter values limits their applicability for GHG inventorying. MC and WIP methods provided similar results in this case study; however, this is case specific because of similarity in assumptions of present and future landfill parameters and quantities of annual waste deposited in recent years being relatively consistent.     

Phosphorus removal from piggery effluents of varying quality using lime and physico-chemical treatment methods

The choice of management practices for the treatment of piggery effluent prior to its disposal to waterways or land is governed by the desire to simultaneously minimise the cost of treatment whilst minimising pollution of the environment. Laboratory experiments were conducted to compare the removal of total and total filterable phosphorus (P) (<0.45 microm) from ortho-phosphate solutions or piggery effluent by hydrated lime or lime kiln dust alone, or from recycled piggery effluent by lime and physico-chemical treatment methods. In addition, the ability of lime to remove P from recycled piggery effluent at an intensive piggery was assessed. Most P in lime treated effluent was present in the >0.45 microm fraction because of the presence of unsettled flocs of P impregnated lime. The efficiency of total P removal by hydrated lime and lime kiln dust decreased as effluent quality declined. The efficiency of removal of total filterable P by hydrated lime or lime kiln dust was not affected by effluent quality. Hydrated lime was more efficient in removing P from effluent or ortho-phosphate solutions, but lime kiln dust was more cost effective. More than 95% of total P was removed from recycled piggery effluent when physico-chemical treatment followed settling with or without lime. The physico-chemical treatment decreased total P mainly by decreasing the number of suspended particles in the effluent and by precipitating some total filterable P as iron, aluminium or calcium compounds.     

Greenhouse gas emissions from the waste sector in Argentina in business-as-usual and mitigation scenarios

The objective of this work was the application of 2006 Intergovernmental Panel on Climate Change (IPCC) Guidelines for the estimation of methane and nitrous oxide emissions from the waste sector in Argentina as a preliminary exercise for greenhouse gas (GHG) inventory development and to compare with previous inventories based on 1996 IPCC Guidelines. Emissions projections to 2030 were evaluated under two scenarios—business as usual (BAU), and mitigation—and the calculations were done by using the ad hoc developed IPCC software. According to local activity data, in the business-as-usual scenario, methane emissions from solid waste disposal will increase by 73% by 2030 with respect to the emissions of year 2000. In the mitigation scenario, based on the recorded trend of methane captured in landfills, a decrease of 50% from the BAU scenario should be achieved by 2030. In the BAU scenario, GHG emissions from domestic wastewater will increase 63% from 2000 to 2030. Methane emissions from industrial wastewater, calculated from activity data of dairy, swine, slaughterhouse, citric, sugar, and wine sectors, will increase by 58% from 2000 to 2030 while methane emissions from domestic will increase 74% in the same period. Results show that GHG emissions calculated from 2006 IPCC Guidelines resulted in lower levels than those reported in previous national inventories for solid waste disposal and domestic wastewater categories, while levels were 18% higher for industrial wastewater.

Implications: The implementation of the 2006 IPCC Guidelines for National Greenhouse Inventories is now considering by the UNFCCC for non-Annex I countries in order to enhance the compilation of inventories based on comparable good practice methods. This work constitutes the first GHG emissions estimation from the waste sector of Argentina applying the 2006 IPCC Guidelines and the ad doc developed software. It will contribute to identifying the main differences between the models applied in the estimation of methane emissions on the key categories of waste emission sources and to comparing results with previous inventories based on 1996 IPCC Guidelines.     

Reduction of greenhouse gases from anaerobic piggery wastewater treatment by bromochloromethane in Taiwan

This work establishes methods of reducing the amount of methane produced from the anaerobic treatment of piggery wastewater by either reducing the storage time before solid/liquid separation or inhibiting the activity of methanogens in anaerobic wastewater treatment system. Experimental results showed these two methods can be adopted effectively to reduce methane production resulting from anaerobic piggery wastewater treatment. First, the wastewater must be processed using solid/liquid separation immediately after washing pig houses. This process can reduce by 62% the biogas production and indirectly decrease the methane production from the anaerobic wastewater treatment reactor. Second, adding 10 mg L(-1) bromochloromethane (BCM) daily into the anaerobic wastewater treatment reactor can significantly reduce the amount of biogas and methane produced during the anaerobic fermentation process. Furthermore, biogas production can be completely inhibited after 4 days. Adding BCM (< or =10 mg L(-1)) to wastewater only slightly affected the efficiency of the anaerobic wastewater treatment process. Results in this study can provide the basis for further research on reduction of the amount of methane produced from anaerobic wastewater treatments.     

The impact of municipal solid waste management on greenhouse gas emissions in the United States

Technological advancements, environmental regulations, and emphasis on resource conservation and recovery have greatly reduced the environmental impacts of municipal solid waste (MSW) management, including emissions of greenhouse gases (GHGs). This study was conducted using a life-cycle methodology to track changes in GHG emissions during the past 25 years from the management of MSW in the United States. For the baseline year of 1974, MSW management consisted of limited recycling, combustion without energy recovery, and landfilling without gas collection or control. This was compared with data for 1980, 1990, and 1997, accounting for changes in MSW quantity, composition, management practices, and technology. Over time, the United States has moved toward increased recycling, composting, combustion (with energy recovery) and landfilling with gas recovery, control, and utilization. These changes were accounted for with historical data on MSW composition, quantities, management practices, and technological changes. Included in the analysis were the benefits of materials recycling and energy recovery to the extent that these displace virgin raw materials and fossil fuel electricity production, respectively. Carbon sinks associated with MSW management also were addressed. The results indicate that the MSW management actions taken by U.S. communities have significantly reduced potential GHG emissions despite an almost 2-fold increase in waste generation. GHG emissions from MSW management were estimated to be 36 million metric tons carbon equivalents (MMTCE) in 1974 and 8 MMTCE in 1997. If MSW were being managed today as it was in 1974, GHG emissions would be approximately 60 MMTCE.     

头孢噻肟钠生产废渣的综合利用

从头孢噻肟钠生产废渣中回收２－硫醇基苯并噻唑合成二硫化二苯并噻唑,ＤＭ的收率达２３．８％,产品质量达到ＨＧＢ２－１５８－６１标准,小试表明,方法可行,操作稳定,简便,既减轻了废渣生成的污染,又回收和用途广泛的化工原料,有一定的环境效益和经济效益。     

Note on In-Traffic Measurement of Airborne Tire-Wear Participate Debris

Measuring greenhouse gas (GHG) source emissions provides data for validation of GHG inventories, which provide the foundation for climate change mitigation. Two Toyota RAV4 electric vehicles were outfitted with high-precision instrumentation to determine spatial and temporal resolution of GHGs (e.g., nitrous oxide, methane [CH₄], and carbon dioxide [CO₂]), and other gaseous species and particulate metrics found near emission sources. Mobile measurement platform (MMP) analytical performance was determined over relevant measurement time scales. Pollutant residence times through the sampling configuration were measured, ranging from 3 to 11 sec, enabling proper time alignment for spatial measurement of each respective analyte. Linear response range for GHG analytes was assessed across expected mixing ratio ranges, showing minimal regression and standard error differences between 5, 10, 30, and 60 sec sampling intervals and negligible differences between the two MMPs. GHG instrument drift shows deviation of less than 0.8% over a 24-hr measurement period. These MMPs were utilized in tracer-dilution experiments at a California landfill and natural gas compressor station (NGCS) to quantify CH₄ emissions. Replicate landfill measurements during October 2009 yielded annual CH₄ emissions estimates of 0.10 ± 0.01, 0.11 ± 0.01, and 0.12 ± 0.02 million tonnes of CO₂ equivalent (MTCO₂E). These values compare favorably to California GHG Emissions Inventory figures for 2007, 2008, and 2009 of 0.123, 0.125, and 0.126 MTCO₂E/yr, respectively, for this facility. Measurements to quantify NGCS boosting facility-wide emissions, during June 2010 yielded an equivalent of 5400 ± 100 TCO₂E/yr under steady-state operation. However, measurements during condensate transfer without operational vapor recovery yield an instantaneous emission rate of 2–4 times greater, but was estimated to only add 12 TCO₂E/yr overall. This work displays the utility for mobile GHG measurements to validate existing measurement and modeling approaches, so emission inventory values can be confirmed and associated uncertainties reduced.

Implications:?Measuring greenhouse gas (GHG) source emissions provides data and validation for GHG inventories, the foundation for climate change mitigation. Mobile measurement platforms with robust analytical instrumentation completed tracer-dilution experiments in California at a landfill and natural gas compressor station (NGCS) to quantify CH₄ emissions. Data collected for landfill CH₄ agree with the current California emissions inventory, while NGCS data show the possible variability from this type of facility. This work displays the utility of mobile GHG measurements to validate existing measurement and modeling approaches, such that emission inventory values can be confirmed, associated uncertainties reduced, and mitigation efforts quantified.     

The role of mechanical and biological treatment in reducing methane emissions from landfill disposal of municipal solid waste in the United Kingdom

In Europe, the European Union Landfill Directive aims to reduce the negative environmental impacts of landfilling. This is mainly to be achieved by reducing the quantity of organic matter deposited, through measures such as the separate collection and recycling of the organic waste stream or pretreatment of residual wastes before landfilling. Other than incineration or other thermal processes, mechanical biological treatment is playing an increasingly important role. This study was conducted to seek the benefits of municipal solid waste (MSW) pretreatment, as well as the differences in methane production from the landfilling of untreated and mechanically/biologically treated (MBT) MSW using GasSim simulation. Results demonstrated that methane production rates vary significantly among waste fractions. Those that contribute most to methane generation (organic material and potentially reusable or recyclable material) could be targeted and treated before landfilling. The statistic relationship from the first phase of the study indicated that to match the increasingly stringent landfill waste organic content allowance, local councils should prioritize the reduction/sorting of certain targeted fractions, such as paper, card, green waste, and other putrescibles from MSW. Moreover, mechanical treatment alone produces organic-rich waste called mechanically sorted organic residues (MSORs), which can be viewed as an organic content concentration process. Mechanically and biologically pretreated waste, on the other hand, differs significantly from untreated MSW and MSORs. This work demonstrated that if efficient mechanical-biological treatment is used, considerable reductions in biological activity, landfill gas production, and energy content/total organic carbon could be achieved. Using GasSim, reductions in methane production of >74% have been simulated if a 90% organic content reduction can be achieved during biological treatment on MSORs. A 50-60% organic content reduction by following biological treatment can turn MSOR properties only into normal MSW equivalent though considerably less volume.     

酒精废水EIC处理技术及综合利用

介绍了旋流内循环（EIC）厌氧反应器处理高浓度酒精废水的方法及效果，用EIC反应器代替UASB处理工艺，具有污染物去除率高、沼气产生量大等优点，产生的沼气用于发电供热，取得了良好的经济效益、环境效益和社会效益。     

Protection from wintertime rainfall reduces nutrient losses and greenhouse gas emissions during the decomposition of poultry and horse manure-based amendments

Manure-based soil amendments (herein “amendments”) are important fertility sources, but differences among amendment types and management can significantly affect their nutrient value and environmental impacts. A 6-month in situ decomposition experiment was conducted to determine how protection from wintertime rainfall affected nutrient losses and greenhouse gas (GHG) emissions in poultry (broiler chicken and turkey) and horse amendments. Changes in total nutrient concentration were measured every 3 months, changes in ammonium (NH₄⁺) and nitrate (NO₃^?) concentrations every month, and GHG emissions of carbon dioxide (CO₂), methane (CH₄), and nitrous oxide (N₂O) every 7–14 days. Poultry amendments maintained higher nutrient concentrations (except for K), higher emissions of CO₂ and N₂O, and lower CH₄ emissions than horse amendments. Exposing amendments to rainfall increased total N and NH₄⁺ losses in poultry amendments, P losses in turkey and horse amendments, and K losses and cumulative N₂O emissions for all amendments. However, it did not affect CO₂ or CH₄ emissions. Overall, rainfall exposure would decrease total N inputs by 37% (horse), 59% (broiler chicken), or 74% (turkey) for a given application rate (wet weight basis) after 6 months of decomposition, with similar losses for NH₄⁺ (69–96%), P (41–73%), and K (91–97%). This study confirms the benefits of facilities protected from rainfall to reduce nutrient losses and GHG emissions during amendment decomposition.

Implications: The impact of rainfall protection on nutrient losses and GHG emissions was monitored during the decomposition of broiler chicken, turkey, and horse manure-based soil amendments. Amendments exposed to rainfall had large ammonium and potassium losses, resulting in a 37–74% decrease in N inputs when compared with amendments protected from rainfall. Nitrous oxide emissions were also higher with rainfall exposure, although it had no effect on carbon dioxide and methane emissions. Overall, this work highlights the benefits of rainfall protection during amendment decomposition to reduce nutrient losses and GHG emissions.     

Renewable energy and greenhouse gas emissions from the waste sectors of European Union member states: a panel data analysis

In the last two decades, there has been a rich debate about the environmental degradation that results from exposure to solid urban waste. Growing public concern with environmental issues has led to the implementation of various strategic plans for waste management in several developed countries, especially in the European Union. In this paper, the relationships were assessed between economic growth, renewable energy extraction and greenhouse gas (GHG) emissions in the waste sector. The Environmental Kuznets Curve hypothesis was analysed for the member states of the European Union, in the presence of electricity generation, landfill and GHG emissions for the period 1995 to 2012. The results revealed that there is no inverted-U-shaped relationship between income and GHG emissions in European Union countries. The renewable fuel extracted from waste contributes to a reduction in GHG, and although the electricity produced also increases emissions somewhat, they would be far greater if the waste-based generation of renewable energy did not take place. The waste sector needs to strengthen its political, economic, institutional and social communication instruments to meet its aims for mitigating the levels of pollutants generated by European economies. To achieve the objectives of the Horizon 2020 programme, currently in force in the countries of the European Union, it will be necessary to increase the share of renewable energy in the energy mix.     

电混凝处理废乳化液的研究

本文对电混凝处理废乳化液的操作条件进行了试验研究。结果是极板间距 8mm、电流密度 5mA/cm2 、时间2 5min为最佳操作条件。处理后出水COD为 86 0mg/L、油为 10 .36mg/L、pH为 8.8、NO-2 为 2 10mg/L ,外观清澈透明。用此水配制乳化液并分析测定了新配制乳化液的性能 ,符合GB6 14 4 85的标准 ,完全可以循环使用电混凝出水配制乳化液。因为电混凝后出水 pH较高 ,含一定量的NaNO2 ,重新配制乳化液时 ,就可以节省NaNO2 。     

Life cycle and economic assessment of source-separated MSW collection with regard to greenhouse gas emissions: a case study in China

In China, the continuously increasing amount of municipal solid waste (MSW) has resulted in an urgent need for changing the current municipal solid waste management (MSWM) system based on mixed collection. A pilot program focusing on source-separated MSW collection was thus launched (2010) in Hangzhou, China, to lessen the related environmental loads. And greenhouse gas (GHG) emissions (Kyoto Protocol) are singled out in particular. This paper uses life cycle assessment modeling to evaluate the potential environmental improvement with regard to GHG emissions. The pre-existing MSWM system is assessed as baseline, while the source separation scenario is compared internally. Results show that 23 % GHG emissions can be decreased by source-separated collection compared with the base scenario. In addition, the use of composting and anaerobic digestion (AD) is suggested for further optimizing the management of food waste. 260.79, 82.21, and ?86.21 thousand tonnes of GHG emissions are emitted from food waste landfill, composting, and AD, respectively, proving the emission reduction potential brought by advanced food waste treatment technologies. Realizing the fact, a modified MSWM system is proposed by taking AD as food waste substitution option, with additional 44 % GHG emissions saved than current source separation scenario. Moreover, a preliminary economic assessment is implemented. It is demonstrated that both source separation scenarios have a good cost reduction potential than mixed collection, with the proposed new system the most cost-effective one.     

Cancer values of prevented fatalities (VPFs), one size does not fit all: the benefits of contaminated site cleanups in Italy

The authors conducted a survey based on conjoint choice experiments in Milan, Italy, about mortality risk reductions delivered by hypothetical private behaviors and public programs, and used it to estimate the value of a prevented fatality (VPF) when the cause of death is cancer. Their estimate of the VPF is 4.2 million Euros. The VPF is about C1 million larger when the risk reduction is delivered by a public program, but further analyses reveal that it is so only when the respondent believes that public programs are effective at reducing this particular type of mortality risk This estimate of the VPF is higher than generic European Union-wide figures recommended by the European Commission Directorate-General for Environment (DG Environment) for environmental policy analyses, and is comparable to other VPFs that are appropriate for Italy, hazardous waste regulations, and enforcement-based cleanup programs. The authors use their VPF to compute the benefits of addressing leaking landfills, illegal disposal of hazardous wastes, and poor hazardous waste management practices in the provinces of Naples and Caserta in southern Italy. The authors also examine the importance of the discount rates, since the mortality benefits of remediation begin in 20 yr and are assumed to continue over 30 yr.