Residence time effects on phase transformation of nanosilver in reduced soils

Residence time effects on phase transformation of silver nanoparticles (AgNPs) (15–50 nm, with and without polyvinylpyrrolidone (PVP) coating) were investigated in reducing soils using experimental geochemistry and synchrotron-based x-ray techniques. After 30 days of anaerobic incubation, a substantial fraction of PVP-coated AgNPs (15 nm) were transformed into Ag₂S and or humic acid (HA) complexed Ag(I), whereas only the HA fraction was dominant in uncoated AgNPs (50 nm). Several investigations recently reported that sulfidation of AgNPs to Ag₂S was the predominant mechanism controlling the fate of AgNP in soil–water environments. However, this investigation showed each AgNP underwent particle-specific chemical transformations to different end compounds after 30 days. Considering the small contribution of Ag(I) dissolution from all AgNPs (less than 5 %), we concluded that changes in solid-state chemical speciation of sorbed AgNPs was promoted by particle-specific interactions of NPs in soil chemical constituents, suggesting a critical role of soil absorbents in predicting the fate of AgNPs in terrestrial environments.     

Alteration of cholinesterase activity as possible mechanism of silver nanoparticle toxicity

Due to their broad-spectrum antimicrobial activity, silver nanoparticles (AgNPs) have been used in a large number of commercial and medical products. Such proliferated AgNP production poses toxicological and environmental issues which need to be addressed. The present study aimed to investigate the effects of AgNPs on acetylcholinesterase (AChE) and butyrylcholinesterase (BChE), important enzymes in areas of neurobiology, toxicology and pharmacology. Three different AgNPs, prepared by the chemical reduction using trisodium citrate, hydroxylamine hydrochloride (Cl-AgNPs), and borohydride following stabilization with poly(vinyl alcohol), were purified and characterised with respect to their sizes, shapes and optical properties. Their inhibition potential on AChE and BChE was evaluated in vitro using an enzyme assay with o-nitrophenyl acetate or o-nitrophenyl butyrate as substrates, respectively. All three studied AgNPs were reversible inhibitors of ChEs. Among tested nanoparticles, Cl-AgNP was found to be the most potent inhibitor of both AChE and BChE. Although the detailed mechanism by which the AgNPs inhibit esterase activities remains unknown, structural perturbation of the enzyme may be the common mode of ChE inhibition by AgNPs.     

Antibacterial activity of silver nanoparticles grafted on stone surface

Microbial colonization has a relevant impact on the deterioration of stone materials with consequences ranging from esthetic to physical and chemical changes. Avoiding microbial growth on cultural stones therefore represents a crucial aspect for their long-term conservation. The antimicrobial properties of silver nanoparticles (AgNPs) have been extensively investigated in recent years, showing that they could be successfully applied as bactericidal coatings on surfaces of different materials. In this work, we investigated the ability of AgNPs grafted to Serena stone surfaces to inhibit bacterial viability. A silane derivative, which is commonly used for stone consolidation, and Bacillus subtilis were chosen as the grafting agent and the target bacterium, respectively. Results show that functionalized AgNPs bind to stone surface exhibiting a cluster disposition that is not affected by washing treatments. The antibacterial tests on stone samples revealed a 50 to 80 % reduction in cell viability, with the most effective AgNP concentration of 6.7 μg/cm². To our knowledge, this is the first report on antimicrobial activity of AgNPs applied to a stone surface. The results suggest that AgNPs could be successfully used in the inhibition of microbial colonization of stone artworks.     

Transport of silver nanoparticles (AgNPs) in soil

The effect of soil properties on the transport of silver nanoparticles (AgNPs) was studied in a set of laboratory column experiments, using different combinations of size fractions of a Mediterranean sandy clay soil. The AgNPs with average size of ∼30 nm yielded a stable suspension in water with zeta potential of −39 mV. Early breakthrough of AgNPs in soil was observed in column transport experiments. AgNPs were found to have high mobility in soil with outlet relative concentrations ranging from 30% to 70%, depending on experimental conditions. AgNP mobility through the column decreased when the fraction of smaller soil aggregates was larger. The early breakthrough pattern was not observed for AgNPs in pure quartz columns nor for bromide tracer in soil columns, suggesting that early breakthrough is related to the nature of AgNP transport in natural soils. Micro-CT and image analysis used to investigate structural features of the soil, suggest that soil aggregate size strongly affects AgNP transport in natural soil. The retention of AgNPs in the soil column was reduced when humic acid was added to the leaching solution, while a lower flow rate (Darcy velocity of 0.17 cm/min versus 0.66 cm/min) resulted in higher retention of AgNPs in the soil. When soil residual chloride was exchanged by nitrate prior to column experiments, significantly improved mobility of AgNPs was observed in the soil column. These findings point to the importance of AgNP-soil chemical interactions as a retention mechanism, and demonstrate the need to employ natural soils rather than glass beads or quartz in representative experimental investigations.     

Green synthesis of silver nanoparticles by microorganism using organic pollutant: its antimicrobial and catalytic application

A novel approach for the green synthesis of silver nanoparticles (AgNPs) from aqueous solution of AgNO₃ using culture supernatant of phenol degraded broth is reported in this work. The synthesis was observed within 10 h, and AgNPs showed characteristic surface plasmon resonance around 410 nm. Spherical nanoparticles of size less than 30 nm were observed in transmission electron microscopy. X-ray diffraction pattern corresponding to 111, 200, 220, and 311 revealed the crystalline nature of the as-formed nanoparticles. It was found that the colloidal solution of AgNP suspensions exhibited excellent stability over a wide range of ionic strength, pH, and temperature. The effect of pH and ionic strength indicated that stabilization is due to electrostatic repulsion arising from the negative charge of the conjugate proteins. The AgNPs showed highly potent antimicrobial activity against Gram-positive, Gram-negative, and fungal microorganisms. The as-prepared AgNPs showed excellent catalytic activity in reduction of 4-nitrophenol to 4-aminophenol by NaBH₄. By manufacturing magnetic alginate beads, the reusability of the AgNPs for the catalytic reaction has been demonstrated.     

Biosynthesis of silver nanoparticles using <Emphasis Type="Italic">Myristica fragrans</Emphasis> seed (nutmeg) extract and its antibacterial activity against multidrug-resistant (MDR) <Emphasis Type="Italic">Salmonella enterica</Emphasis> serovar Typhi isolates

Biosynthesis of nanoparticles has received increasing attention due its effective mode of action, eco-friendly preparation methodology, and less cytotoxicity. In the present study, silver nanoparticles (AgNPs) from aqueous seed extract of Myristica fragrans (nutmeg) were characterized. Gas chromatography–mass spectrometry (GC–MS) analysis revealed the presence of bioactive components acts as effective in reducing and capping agents for converting AgNO₃ to AgNPs. The UV-Vis absorption spectrum of the biologically reduced reaction mixture showed the surface plasmon peak at 420 nm, which is the characteristic peak of AgNPs. The functional molecules present in the M. fragrans seed extract and their interaction with the AgNPs were identified by the Fourier transform infrared spectroscopy (FT-IR) analysis. X-ray diffraction (XRD) analysis confirmed the face-centered cubic crystalline structure of metallic silver nanoparticle and diameter was calculated using Scherrer’s equation. Transmission electron microscope (TEM) image showed spherical shaped particles with an average size of 25 nm. The scanning electron microscopy–energy dispersive spectroscopy (SEM–EDS) confirmed the presence of elemental silver. The antibacterial activity of biosynthesized AgNPs was evaluated against multidrug-resistant (MDR) Salmonella enterica serovar Typhi (S. Typhi) according to agar well diffusion, MIC (minimum inhibitory concentration), and IC₅₀ (inhibitory concentration 50%). The results confirm that bacterial growth was significantly reduced in a dose-dependent manner. Further, the cytotoxic effect of biosynthesized AgNPs on rat spleenocytes was analyzed. Thus, it is suggested that the nutmeg-biosynthesized AgNPs could be a lead drug and used effectively to control the MDR S. Typhi, thereby reducing public health issues and environmental pollution.     

Influence of dissolved oxygen on aggregation kinetics of citrate-coated silver nanoparticles

Aggregation, an important environmental behavior of silver nanoparticles (AgNPs) influences their bioavailability and cytotoxicity. The work studied the influence of dissolved oxygen (DO) or the redox potential on the stability of AgNPs in aqueous environments. This study employed time-resolved dynamic light scattering (TR-DLS) to investigate the aggregation kinetics of citrate-coated AgNPs. Our results demonstrated that when DO was present, the aggregation rates became much faster (e.g., 3-8 times) than those without DO. The hydrodynamic sizes of AgNPs had a linear growth within the initial 4-6 h and after the linear growth, the hydrodynamic sizes became random for AgNPs in the presence of DO, whereas in the absence of DO the hydrodynamic sizes grew smoothly and steadily. Furthermore, the effects of primary particles sizes (20, 40, and 80 nm) and initial concentrations (300 and 600 μg/L) of AgNPs on aggregation kinetics were also investigated.     

Short-term effect of aniline on soil microbial activity: a combined study by isothermal microcalorimetry, glucose analysis, and enzyme assay techniques

The accidents of aniline spill and explosion happened almost every year in China, whereas the toxic effect of aniline on soil microbial activity remained largely unexplored. In this study, isothermal microcalorimetric technique, glucose analysis, and soil enzyme assay techniques were employed to investigate the toxic effect of aniline on microbial activity in Chinese soil for the first time. Soil samples were treated with aniline from 0 to 2.5 mg/g soil to tie in with the fact of aniline spill. Results from microcalorimetric analysis showed that the introduction of aniline had a significant adverse effect on soil microbial activity at the exposure concentrations ≥0.4 mg/g soil (p?<?0.05) and ≥0.8 mg/g soil (p?<?0.01), and the activity was totally inhibited when the concentration increased to 2.5 mg/g soil. The glucose analysis indicated that aniline significantly decreased the soil microbial respiratory activity at the concentrations ≥0.8 mg/g soil (p?<?0.05) and ≥1.5 mg/g soil (p?<?0.01). Soil enzyme activities for β-glucosidase, urease, acid-phosphatase, and dehydrogenase revealed that aniline had a significant effect (p?<?0.05) on the nutrient cycling of C, N, and P as well as the oxidative capacity of soil microorganisms, respectively. All of these results showed an intensively toxic effect of aniline on soil microbial activity. The proposed methods can provide toxicological information of aniline to soil microbes from the metabolic and biochemical point of views which are consistent with and correlated to each other.     

Interaction of silver nanoparticles with pure nitrifying bacteria

In this study, Nitrosomonas europaea ATCC 19718 was exposed to silver nanoparticles (AgNPs) of different particle size (7 ± 3 and 40 ± 14 nm) and different coatings (polyvinyl alcohol and adenosine triphosphate disodium). For all different AgNPs used in the study, large aggregates were gradually formed after addition of AgNPs into the media containing N. europaea. The scanning electron microscopy and energy dispersive X-ray spectroscopy of the microstructures suggested that bacterial cells and electrolytes had significant effects on AgNP aggregation. Size- and coating-dependent inhibition of ammonia oxidation by AgNPs was observed, and our analysis suggested that the inhibition was not only due to the released dissolved silver, but also the dispersity of AgNPs in the culture media. Electron microscopy images showed AgNPs could cause the damage of cell wall of N. europaea and make the nucleoids disintegrated and condensed next to cell membrane. Surface-enhanced Raman scattering signals also implied the damage of cell membrane caused by AgNPs. Further protein expression analysis revealed that AgNPs would inhibit important protein functions, including biosynthesis, gene expression, energy production and nitrification to further cause toxicity to N. europaea. Our findings explain the susceptibility of N. europaea to inhibition by AgNPs and the possible interaction between each other. Future research is needed to characterize these effects in more complex cultures and media such as activated sludge and wastewater.     

Toxicity,uptake, and accumulation of nano and bulk cerium oxide particles in <Emphasis Type="Italic">Artemia salina</Emphasis>

Although the toxicological impact of metal oxide nanoparticles has been studied for the last few decades on aquatic organisms, the exact mechanism of action is still unclear. The fate, behavior, and biological activity of nanoparticles are dependent on physicochemical factors like size, shape, surface area, and stability in the medium. This study deals with the effect of nano and bulk CeO₂ particles on marine microcrustacean, Artemia salina. The primary size was found to be 15 ± 3.5 and 582 ± 50 nm for nano and bulk CeO₂ (TEM), respectively. The colloidal stability and sedimentation assays showed rapid aggregation of bulk particles in seawater. Both the sizes of CeO₂ particles inhibited the hatching rate of brine shrimp cyst. Nano CeO₂ was found to be more toxic to A. salina (48 h LC₅₀ 38.0 mg/L) when compared to bulk CeO₂ (48 h LC₅₀ 92.2 mg/L). Nano CeO₂-treated A. salina showed higher oxidative stress (ROS) than those treated with the bulk form. The reduction in the antioxidant activity indicated an increase in oxidative stress in the cells. Higher acetylcholinesterase activity (AChE) was observed upon exposure to nano and bulk CeO₂ particles. The uptake and accumulation of CeO₂ particles were increased with respect to the concentration and particle size. Thus, the above results revealed that nano CeO₂ was more lethal to A. salina as compared to bulk particles.     

Combined biocidal action of silver nanoparticles and ions against Chlorococcales (S<Emphasis Type="Italic">cenedesmus quadricauda</Emphasis>, <Emphasis Type="Italic">Chlorella vulgaris)</Emphasis> and filamentous algae (<Emphasis Type="Italic">Klebsormidium sp.</Emphasis>)

Despite the extensive research, the mechanism of the antimicrobial and biocidal performance of silver nanoparticles has not been unequivocally elucidated yet. Our study was aimed at the investigation of the ability of silver nanoparticles to suppress the growth of three types of algae colonizing the wetted surfaces or submerged objects and the mechanism of their action. Silver nanoparticles exhibited a substantial toxicity towards Chlorococcales Scenedesmus quadricauda, Chlorella vulgaris, and filamentous algae Klebsormidium sp., which correlated with their particle size. The particles had very good stability against agglomeration even in the presence of multivalent cations. The concentration of silver ions in equilibrium with nanoparticles markedly depended on the particle size, achieving about 6 % and as low as about 0.1 % or even less for the particles 5 nm in size and for larger ones (40–70 nm), respectively. Even very limited proportion of small particles together with larger ones could substantially increase concentration of Ag ions in solution. The highest toxicity was found for the 5-nm-sized particles, being the smallest ones in this study. Their toxicity was even higher than that of silver ions at the same silver concentration. When compared as a function of the Ag⁺ concentration in equilibrium with 5-nm particles, the toxicity of ions was at least 17 times higher than that obtained by dissolving silver nitrite (if not taking into account the effect of nanoparticles themselves). The mechanism of the toxicity of silver nanoparticles was found complex with an important role played by the adsorption of silver nanoparticles and the ions released from the particles on the cell surface. This mechanism could be described as some sort of synergy between nanoparticles and ions. While our study clearly showed the presence of this synergy, its detailed explanation is experimentally highly demanding, requiring a close cooperation between materials scientists, physical chemists, and biologists.     

Phytotoxicity of silver nanoparticles to Lemna minor L

The use of silver nanoparticles (AgNPs) in commercial products has increased significantly in recent years. Although there has been some attempt to determine the toxic effects of AgNPs, there is little information on aquatic plants which have a vital role in ecosystems. This study reports the use of Lemna minor L. clone St to investigate the phytotoxicity of AgNPs under modified OECD test conditions. AgNPs were synthesised, characterised and subsequently presented to the L. minor. Results showed that inhibition of plant growth was evident after exposure to small (∼20 nm) and larger (∼100 nm) AgNPs at low concentrations (5 μg L⁻¹) and this effect became more acute with a longer exposure time. There was a linear dose-response relationship after 14 d exposure. Using predicted environmental concentrations for wastewaters it was found that AgNPs may pose a significant potential risk to the environment.     

Photolysis of atrazine in aqueous solution: role of process variables and reactive oxygen species

Photochemical advanced oxidation processes have been considered for the treatment of water and wastewater containing the herbicide atrazine (ATZ), a possible human carcinogen and endocrine disruptor. In this study, we investigated the effects of the photon emission rate and initial concentration on ATZ photolysis at 254 nm, an issue not usually detailed in literature. Moreover, the role of reactive oxygen species (ROS) is discussed. Photon emission rates in the range 0.87?×?10¹⁸–3.6?×?10¹⁸ photons L^?1 s^?1 and [ATZ]₀?=?5 and 20 mg L^?1 were used. The results showed more than 65 % of ATZ removal after 30 min. ATZ photolysis followed apparent first-order kinetics with k values and percent removals decreasing with increasing herbicide initial concentration. A fivefold linear increase in specific degradation rate constants with photon emission rate was observed. Also, regardless the presence of persistent degradation products, toxicity was efficiently removed after 60-min exposure to UV radiation. Experiments confirmed a noticeable contribution of singlet oxygen and radical species to atrazine degradation during photolysis. These results may help understand the behavior of atrazine in different UV-driven photochemical degradation treatment processes.     

Adaptation of the Daphnia sp. acute toxicity test: miniaturization and prolongation for the testing of nanomaterials

Manufacturing of nanomaterials (NMs) is often complex and expensive, and their environmental risks are poorly understood or even unknown. An economization of testing NMs is therefore desirable, which can be achieved by miniaturizing test systems. However, the downsizing of test vessels and volumes can enlarge the surface/volume ratio (SVR) which in turn can affect the bioavailable concentration of adsorbing substances like NMs. The present study focused on the miniaturization of the acute toxicity test with Daphnia magna. The adaptations were verified with three reference substances, the non-adsorbing potassium dichromate (K₂Cr₂O₇) and as potentially highly-adsorbing substances silver nanoparticles (AgNPs) and silver nitrate (AgNO₃). The miniaturized test was conducted in 24-well microtiter plates (MT) and simultaneously compared to the OECD standard test (ST). Furthermore, the test duration was prolonged from 48 to 96 h since NMs tend to show effects only after extended exposure. The toxicity of K₂Cr₂O₇ and AgNPs continued to increase within the prolonged test span. The test comparisons with K₂Cr₂O₇ did not reveal any significant differences between ST and MT. AgNO₃ toxicity was significantly decreased in MT compared to ST due to the enlarged SVR. The toxicity of AgNPs in MT after 24 h was equal to ST. Contrary to our expectations an exposure longer than 24 h resulted in an increase of AgNP toxicity in MT, possibly due to enhanced dissolution of silver. Microtiter plates are appropriate alternative test vessels for the Daphnia sp. acute toxicity test; thus, its miniaturization is feasible. The enlarged SVR has to be taken into account since it can affect the toxicity of potentially adsorbing substances. Furthermore, the standard test duration of 48 h might underestimate the toxicity of many substances, especially of NMs.     

The impact of size on the fate and toxicity of nanoparticulate silver in aquatic systems

The increased use of silver nanomaterials presents a risk to aquatic systems due to the high toxicity of silver. The stability, dissolution rates and toxicity of citrate- and polyvinylpyrrolidone-coated silver nanoparticles (AgNPs) were investigated in synthetic freshwater and natural seawater media, with the effects of natural organic matter investigated in freshwater. When sterically stabilised by the large PVP molecules, AgNPs were more stable than when charge-stabilised using citrate, and were even relatively stable in seawater. In freshwater and seawater, citrate-coated AgNPs (Ag–Cit) had a faster rate of dissolution than PVP-coated AgNPs (Ag–PVP), while micron-sized silver exhibited the slowest dissolution rate. However, similar dissolved silver was measured for both AgNPs after 72 h in freshwater (500–600 μg L⁻¹) and seawater (1300–1500 μg L⁻¹), with higher concentrations in seawater attributed to chloride complexation. When determined on a mass basis, the 72-h IC50 (inhibitory concentration giving 50% reduction in algal growth rate) for Pseudokirchneriella subcapitata and Phaeodactylum tricornutum and the 48-h LC50 for Ceriodaphnia dubia exposure to Ag⁺ (1.1, 400 and 0.11 μg L⁻¹, respectively), Ag–Cit (3.0, 2380 and 0.15 μg L⁻¹, respectively) and Ag–PVP (19.5, 3690 and 2.0 μg L⁻¹, respectively) varied widely, with toxicity in the order Ag⁺ > Ag–Cit > Ag–PVP. Micron-sized silver treatments elicited much lower toxicity than ionic Ag⁺ or AgNP to P. subcapitata. However, when related to the dissolved silver released from the nanoparticles the toxicities were similar to ionic silver treatments. The presence of natural organic matter stabilised the particles and reduced toxicity in freshwater. These results indicate that dissolved silver was responsible for the toxicity and highlight the need to account for matrix components such as chloride and organic matter in natural waters that influence AgNP fate and mitigate toxicity.     

Removal of xylenol orange from its aqueous solution using SDS self-microemulsifying systems: optimization by Box–Behnken statistical design

The aim of present study was to develop and evaluate sodium dodecyl sulfate (SDS) self-microemulsifying systems (SMES) for the removal of an anionic dye xylenol orange (XO) from its bulk aqueous media via liquid–liquid adsorption. The composition of SDS SMES was optimized by Box–Behnken statistical design for the maximum removal of XO from its aqueous solution. Various SDS formulations were prepared by spontaneous emulsification method and characterized for thermodynamic stability, self-microemulsification efficiency, droplet size, and viscosity. Adsorption studies were conducted at 8, 16, and 24 h by mixing small amounts of SDS formulations with relatively large amounts of bulk aqueous solution of XO. Droplet size and viscosity of SDS formulations were significantly influenced by oil phase concentration (triacetin), while surfactant concentration had little impact on droplet size and viscosity. However, the percentage of removal of XO was influenced by triacetin concentration, surfactant concentration, and adsorption time. Based on lowest droplet size (35.97 nm), lowest viscosity (29.62 cp), and highest percentage of removal efficiency (89.77 %), formulation F₁₄, containing 2 % w/w of triacetin and 40 % w/w of surfactant mixture (20 % w/w of SDS and 20 % w/w of polyethylene glycol 400), was selected as an optimized formulation for the removal of XO from its bulk aqueous media after 16 h. These results indicated that SDS SMES could be suitable alternates of solid–liquid adsorption for the removal of toxic dyes such as XO from its aqueous solution through liquid–liquid adsorption.     

Biosorption of arsenic from aqueous solution using dye waste

The purpose of this study is to examine on removal of arsenic from water by biosorption through potential application of herbal dye wastes. Four different flower dye residues (after extraction of natural dye) viz. Hibiscus rosasinensis, Rosa rosa, Tagetes erecta, and Canna indica were utilized successfully for the removal of arsenic from aqueous solution. Batch studies were carried out for various parameters viz. pH, sorbent dose, contact time, initial metal ion concentration, and temperature. Data were utilized for isothermal, kinetic, and thermodynamic studies. Scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDAX), and Fourier transform infrared (FTIR) analyses of biomass were performed. The results showed that 1 g/100 ml for 5.0–5.5 h contact time at pH 6.0–7.5 with agitation rate 150 rpm provided 98, 96, 92, and 85 % maximum absorption of arsenic by R. rosa, H. rosasinensis, T. erecta, and C. indica, respectively, at initial concentration of 500 ppb. Data followed Langmuir isotherm showing sorption to be monolayer on heterogeneous surface of biosorbent. Negative values of ΔG° indicated spontaneous nature, whereas ΔH° indicates exothermic nature of system followed by pseudo-first-order adsorption kinetics. FTIR results showed apparent changes in functional group regions after metal chelation. SEM and EDAX analyses showed the changes in surface morphology of all test biosorbents. Herbal dye wastes, used as biosorbent, exhibited significant (85–98 %) removal of arsenic from aqueous solution. Hence, these biosorbents are cost-effective, easily available, eco-friendly, and comparatively more effective than other biosorbents already in use. These may be used to remove arsenic and other toxic metals from water.     

Reaction of silver nanoparticles in the disinfection process

This study investigated the dissolution, aggregation, and reaction kinetics of silver nanoparticles (AgNPs) with the three types of water disinfectants (ultraviolet, sodium hypochlorite, and ozone) under the different conditions of pH, ionic strength, or humic acid (HA). The physicochemical changes of AgNPs were measured by using UV–Vis spectroscopy, transmission electron microscopy, and inductively coupled plasma optical emission spectrometer. The results showed that when AgNPs contacted the disinfectants, oxidative dissolution was the primary reaction. In addition, the reaction kinetics studies revealed that the reaction rate of AgNPs with disinfectants was significantly influenced by different disinfectants along with different pH and the presence of sodium nitrate and HA. Our research demonstrated the potential effect of disinfectants on AgNPs, which will improve our understanding of the fate of AgNPs in the disinfection processes in the water and wastewater treatment plant.     

Anodic oxidation of benzoquinone using diamond anode

The anodic degradation of 1,4-benzoquinone (BQ), one of the most toxic xenobiotic, was investigated by electrochemical oxidation at boron-doped diamond anode. The electrolyses have been performed in a single-compartment flow cell in galvanostatic conditions. The influence of applied current (0.5–2 A), BQ concentration (1–2 g dm^?3), temperature (20–45 °C) and flow rate (100–300 dm³ h^?1) has been studied. BQ decay kinetic, the evolution of its oxidation intermediates and the mineralization of the aqueous solutions were monitored during the electrolysis by high-performance liquid chromatograph (HPLC) and chemical oxygen demand (COD) measurements. The results obtained show that the use of diamond anode leads to total mineralization of BQ in any experimental conditions due to the production of oxidant hydroxyl radicals electrogenerated from water discharge. The decay kinetics of BQ removal follows a pseudo-first-order reaction, and the rate constant increases with rising current density. The COD removal rate was favoured by increasing of applied current, recirculating flow rate and it is almost unaffected by solution temperature.