Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

Wood Polypropylene (PP) Composites Manufactured by Mango Wood Waste with Virgin or Recycled PP: Mechanical,Morphology, Melt Flow Index and Crystalline Behaviour

Compositions of wood-polypropylene composites (WPCs) are prepared through melt compounding followed by injection moulding. WPCs are formulated for eight compositions with a different weight ratio of wood, virgin or recycled polypropylene and coupling agent. WPCs compositions are compared in terms of Melt Flow Index, Tensile, FESEM images, Flexural and crystallinity index for same operating variable conditions. From the results, recycled polypropylene based WPCs are superior in comparison to virgin polypropylene based WPCs. With the addition of 5 % coupling agent in recycled polypropylene-based composites for 45:50 composition, tensile and flexural values of WPCs are higher in comparison to all composition and neat virgin or recycled polypropylene. This work stands for the utilization of waste wood with recycled plastic for replacement of wood and virgin plastic.     

Kinetic,equilibrium and thermodynamic studies for the sorption of metribuzin from aqueous solution using banana peels,an agro-based biomass

Banana peels were employed for the removal of metribuzin from aqueous solution. Sorption in the batch mode was optimized regarding pH, contact time, sorbent dose, initial pesticide concentrations, and temperature. The sorption data were fitted to pseudo-first-order, pseudo-second-order, intraparticle diffusion, Elovich, and liquid film diffusion model, the pseudo-second-order exhibiting best fit (R² = 0.9803). Of the four most common sorption isotherm models (Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich), the data followed the Langmuir isotherm with highest correlation. The maximum adsorption capacity was found to be 167 mg g^?1. Gibbs free energy, enthalpy, and entropy showed that the sorption was exothermic and spontaneous.     

Source identification, contamination status and health risk assessment of heavy metals from road dusts in Dhaka, Bangladesh

In this study, concentrations of Cr, Mn, Ni, Cu, Zn, Cd and Pb were determined in road dusts collected from different locations in Dhaka to assess source, contamination status and health risk. Energy-dispersive X-ray fluorescence spectroscopy and energy-dispersive X-ray spectroscopy were used to determine Cr, Mn, Ni, Cu, Zn, Cd and Pb and their mean concentrations were 162.27 ± 29.46, 721.18 ± 180.14, 35.65 ± 12.55, 104.56 ± 128.33, 515.32 ± 321.90, BDL, and 342.82 ± 591.20 mg/kg, respectively. Among the heavy metals, highest concentrations of Cu, Zn and Pb were found at urban sites-7 (municipal waste dumping) and 8 (medical waste incineration). Highest concentration of Cr followed by Cu and Zn was found at site-5 (Tejgaon, urban). Principal component analysis revealed that anthropogenic activities are the potential sources for Cr, Ni, Cu, Zn and Pb while earth crust for Mn. Pollution index and pollution load index results suggested that all the sites were contaminated and/or degraded by Cr, Cu, Zn and Pb except sites-9 (urban), 10 (sub-urban), 11 (rural) while sites-7 and 8 (urban) were extremely degraded. For noncarcinogenic health risk, hazard quotient values for dermal were higher compared to that of inhalation/ingestion. Though hazard index values were less than 1 at all the sites, these were at least one order of magnitude higher for children group than that of adult group, thus the children group may face more noncarcinogenic health risk at sites-7 and 8. Values of incremental lifetime cancer risk were from 10⁻⁹ to 10⁻¹¹ showed no carcinogenic health risk by road dusts contaminated with the heavy metals.     

Environmental and health impacts of spraying COVID-19 disinfectants with associated challenges

Environmental Science and Pollution Research - Coronavirus refers to a group of widespread viruses. The name refers to the specific morphology of these viruses because their spikes look like a...     

Correction to: Ecotoxicological assessment of oil-based paint using three-dimensional multi-species bio-testing model: pre- and post-bioremediation analysis

Environmental Science and Pollution Research - The original publication of this paper contains a mistake.     

A short review on hydrothermal liquefaction of livestock manure and a chance for Korea to advance swine manure to bio-oil technology

Due to the abundant supply and suitable physicochemical characteristics of livestock manure, it may be a useful biomass to produce biofuels, such as “bio-oil.” Hydrothermal liquefaction is a promising method for converting such wet biomasses into a liquid fuels and has attracted attention worldwide. In this review, the current state of research on the hydrothermal liquefaction of livestock manure biomasses is summarized. The effect of operating parameters on the yield of bio-oil is also reviewed. The fundamental characteristics of raw manure biomasses and converted oils are outlined and discussed in the paper. To reduce the use of fossil fuel and nuclear energy, the South Korean government has pledged to increase renewable energy. Based on findings from a literature review, it can be concluded that there is a chance for Korea to advance bio-oil production from the abundant and tremendous energy potential of swine manure by a hydrothermal liquefaction process.     

Ag@MnxOy: an effective catalyst for photo-degradation of rhodamine B dye

Environmental Chemistry Letters - Water pollution by the textile industry is a major issue. Therefore, there is a need for methods to remove organic dyes from industrial effluents. Various...     

Construction of double tube granular sludge microbial fuel cell and its characteristics and mechanism of azo dye degradation

Environmental Science and Pollution Research - Microbial fuel cells (MFCs) can obtain electrical energy from extensive organic matter and complete wastewater treatment at the same time. The...     

Adsorptive removal of direct dyes by PEI-treated peanut husk biomass: Box–Behnken experimental design

This paper reports the application of Box-Behnken experimental design to illustrate the adsorption of direct dyes (Indosol Black NF and Indosol Orange RSN) using polyethyleneimine (PEI)-treated peanut husk biomass. The effect of three independent variables (initial dyes concentration, biosorbent dose and pH) was investigated during the study. Maximum biosorption capacity (141 and 98.2 mg/g) of PEI-pretreated biomass was achieved with 200 mg/L initial dye concentration and 0.05 g/50 mL biomass dose for Indosol Black NF and Indosol Orange RSN, respectively. Acidic pH was found to be favourable for maximum dyes removal. Characterisation of biosorbent was carried out through Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy, thermogravimetric analysis (TGA) and point of zero charge determination. FT-IR analyses confirmed the involvement of carboxylic and carbonyl groups. The desorption study was also conducted to check out the possibility of regeneration of dyes and adsorbent and it was found that 51.58 and 76.6% of Indosol Black NF and Indosol Orange RSN, respectively, can be desorbed from the loaded biosorbent by using 1 M NaOH solution. The results indicated that PEI-treated peanut husk biomass can be used as an efficient biosorbent for the removal of Indosol Black NF and Indosol Orange RSN dyes from aqueous solutions.