Kinetic,equilibrium and thermodynamic studies for the sorption of metribuzin from aqueous solution using banana peels,an agro-based biomass

Banana peels were employed for the removal of metribuzin from aqueous solution. Sorption in the batch mode was optimized regarding pH, contact time, sorbent dose, initial pesticide concentrations, and temperature. The sorption data were fitted to pseudo-first-order, pseudo-second-order, intraparticle diffusion, Elovich, and liquid film diffusion model, the pseudo-second-order exhibiting best fit (R² = 0.9803). Of the four most common sorption isotherm models (Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich), the data followed the Langmuir isotherm with highest correlation. The maximum adsorption capacity was found to be 167 mg g^?1. Gibbs free energy, enthalpy, and entropy showed that the sorption was exothermic and spontaneous.     

Nitrogen fertility and abiotic stresses management in cotton crop: a review

This review outlines nitrogen (N) responses in crop production and potential management decisions to ameliorate abiotic stresses for better crop production. N is a primary constituent of the nucleotides and proteins that are essential for life. Production and application of N fertilizers consume huge amounts of energy, and excess is detrimental to the environment. Therefore, increasing plant N use efficiency (NUE) is important for the development of sustainable agriculture. NUE has a key role in crop yield and can be enhanced by controlling loss of fertilizers by application of humic acid and natural polymers (hydrogels), having high water-holding capacity which can improve plant performance under field conditions. Abiotic stresses such as waterlogging, drought, heat, and salinity are the major limitations for successful crop production. Therefore, integrated management approaches such as addition of aminoethoxyvinylglycine (AVG), the film antitranspirant (di-1-p-menthene and pinolene) nutrients, hydrogels, and phytohormones may provide novel approaches to improve plant tolerance against abiotic stress-induced damage. Moreover, for plant breeders and molecular biologists, it is a challenge to develop cotton cultivars that can tolerate plant abiotic stresses while having high potential NUE for the future.     

Wood Polypropylene (PP) Composites Manufactured by Mango Wood Waste with Virgin or Recycled PP: Mechanical,Morphology, Melt Flow Index and Crystalline Behaviour

Compositions of wood-polypropylene composites (WPCs) are prepared through melt compounding followed by injection moulding. WPCs are formulated for eight compositions with a different weight ratio of wood, virgin or recycled polypropylene and coupling agent. WPCs compositions are compared in terms of Melt Flow Index, Tensile, FESEM images, Flexural and crystallinity index for same operating variable conditions. From the results, recycled polypropylene based WPCs are superior in comparison to virgin polypropylene based WPCs. With the addition of 5 % coupling agent in recycled polypropylene-based composites for 45:50 composition, tensile and flexural values of WPCs are higher in comparison to all composition and neat virgin or recycled polypropylene. This work stands for the utilization of waste wood with recycled plastic for replacement of wood and virgin plastic.     

An Objective Multiattribute Analysis Approach for Allocation of Scarce Irrigation Water Resources1

Zardari, Noor ul Hassan, Ian Cordery, and Ashish Sharma, 2010. An Objective Multiattribute Analysis Approach for Allocation of Scarce Irrigation Water Resources. Journal of the American Water Resources Association (JAWRA) 46(2):412-428. DOI: 10.1111/j.1752-1688.2009.00410.x Abstract: In this study, end user (farmer) and decision maker (water allocator) opinions were surveyed and a conjoint analysis (CA) based method was applied to the quantitative and qualitative data to assess the utility associated with each attribute that plays a role in forming the final thinking of the water users. The application of CA for estimating the utility for each attribute level is a novel approach, which helps provide a formal, objective basis for assigning relative scales for each attribute interval within a multiattribute decision-making model. The utilities (part-worths) obtained from the CA have a cardinal scale and were found to be comparable within and across the attributes. A farmers’ survey on five water allocation attributes was completed from 62 farmers and their opinions on the relative importance of attributes were elicited for a subarea of the Indus River Basin. The CA method was then applied to the survey data and the utilities for each attribute level were determined. This allowed, for instance, decisions to be made, which take account of the perceived value of the water and of the availability of local labor to work on the farm. Finally, these interval scales were used within the specification of the ELECTRE multiattribute decision-making method to provide a complete and objective ranking of nine irrigation districts so that the best decisions on water allocation could be made.     

Contributions to ecological chemistry CXII balance of conversion of buturon‐14C in wheat under outdoor conditions 1

Abstract

The urea herbicide buturon (N‐[p‐chlorophenyl] ‐N’ ‐methyl‐N’ ‐isobutinyl‐urea), ¹⁴C‐labeled, was sprayed on winter wheat as an aqueous formulation (2.98 kg/ha) under outdoor conditions. Upon harvest (three months after application), a total of 49. 2% of the applied radiocarbon was recovered: 2.0% in the plants, 46.9% in the soil, and 0.3% in the leaching water (depth > 50 cm); less than 0.1% was in the grains (0.464 ppm). Only about half of the radioactivity present in plants could be recovered under mild extraction conditions; about half of this was unchanged buturon. In straw and husk extracts, the following metabolites were identified by gaschromatography/mass spectrometry: N‐(p‐chlorophenyl)‐N‐methyl‐O‐methyl‐carbamate (metabolite I), N‐phenyl‐N’ ‐formyl‐urea (metabolite II), two unstable metabolites giving (p‐chlorophenyl)‐isocyanate upon purification (metabolites III and IV), N‐(p‐chlorophenyl)‐N’ ‐methyl‐N’ ‐isobutenylol‐urea (metabolite V), p‐chloroformanilide (metabolite VI) and biologically bound p‐chloroaniline (metabolite VII). In the root and basal stem extract, the following metabolites were identified by gas chromatography/mass spectrometry: N‐(p‐chlorophenyl)‐O‐methyl‐carbamate (metabolite VIII) and N‐(p‐chlorophenyl)‐N’ ‐methyl‐urea (metabolite IX).     

Environmental and health impacts of spraying COVID-19 disinfectants with associated challenges

Environmental Science and Pollution Research - Coronavirus refers to a group of widespread viruses. The name refers to the specific morphology of these viruses because their spikes look like a...     

Efficacy of feed improvement in livestock farming to offset climate variations in Punjab,Pakistan: silage as an example

Environmental Science and Pollution Research - Globally, climate change is an alarming threat to the livestock industry. Such changes in the climate can also adversely affect the returns of...     

A multi-emission analysis of organic and inorganic pollutants during the combustion of sludge with high and low calorific value coals

Environmental Science and Pollution Research - To achieve allowable gas emission limits and eliminate the high cost and challenges associated with pre-treatment of sludge before incineration, a new...     

A review of global outlook on fluoride contamination in groundwater with prominence on the Pakistan current situation

Several million people are exposed to fluoride (F^?) via drinking water in the world. Current review emphasized the elevated level of fluoride concentrations in the groundwater and associated potential health risk globally with a special focus on Pakistan. Millions of people are deeply dependent on groundwater from different countries of the world encompassing with an elevated level of fluoride. The latest estimates suggest that around 200 million people, from among 25 nations the world over, are under the dreadful fate of fluorosis. India and China, the two most populous countries of the world, are the worst affected. In Pakistan, fluoride data of 29 major cities are reviewed and 34% of the cities show fluoride levels with a mean value greater than 1.5 mg/L where Lahore, Quetta and Tehsil Mailsi are having the maximum values of 23.60, 24.48, > 5.5 mg/L, respectively. In recent years, however, other countries have minimized, even eliminated its use due to health issues. High concentration of fluoride for extended time period causes adverse effects of health such as skin lesions, discoloration, cardiovascular disorders, dental fluorosis and crippling skeletal fluorosis. This review deliberates comprehensive strategy of drinking water quality in the global scenario of fluoride contamination, especially in Pakistan with prominence on major pollutants, mitigation technologies, sources of pollution and ensuing health problems. Considering these verities, health authorities urgently need to establish alternative means of water decontamination in order to prevent associated health problems.     

A comprehensive review of hydrophobic silica and composite aerogels: synthesis,properties and recent progress towards environmental remediation and biomedical applications

Environmental Science and Pollution Research - The hydrophobicity of silica and composite aerogels has enabled them to acquire applications in a variety of fields. With remarkable structural,...