Removal of congo red and basic violet 1 by chir pine (Pinus roxburghii) sawdust,a saw mill waste: batch and column studies

The efficiency of chir pine sawdust (CPS) for adsorptive removal of the dyes, congo red (CR) and basic violet 1 (BV), from aqueous solution was evaluated using batch and column studies. The equilibrium was attained in 60 min for CR and 45 min for BV. The adsorption of BV obeyed the Langmuir isotherm model while the Freundlich isotherm fitted the equilibrium data of CR adsorption. The Langmuir monolayer adsorption capacities (Q_o) of CPS for BV and CR were 11.3 and 5.8 g kg^?1, respectively. The kinetic data for CR were best fitted to the Lagergren pseudo-first-order model and for BV to the pseudo-second-order model. The intra-particle diffusion was found to be the rate-controlling step for CR adsorption, while the adsorption kinetics of BV were controlled by both intra-particle and liquid-film diffusion. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The adsorption activation energy (E_a) for CR (124 kJ mol^?1) implied chemical adsorption while that for BV (5.4 kJ mol^?1) indicated physical adsorption. An increase in the Thomas model constant (K_Th) with increasing flow indicated that for both dyes the mass transport resistance decreased during adsorption. Thus, CPS may be an efficient low-cost adsorbent for decolorization of dye-containing wastewaters.     

Pomegranate husk as an adsorbent in the removal of toxic chromium from wastewater

The use of a new sorbent developed from the husk of pomegranate, a famous fruit in Egypt, for the removal of toxic chromium from aqueous solution has been investigated. The batch experiment was conducted to determine the adsorption capacity of the pomegranate husk. The effects of initial metal concentration (25 and 50 mg l^?1), pH, contact time, and sorbent concentration (2–6 g l^?1) have been studied at room temperature. A strong dependence of the adsorption capacity on pH was observed, the capacity increased as the pH decreased, and the optimum pH value was pH 1.0. Adsorption equilibrium and kinetics were studied with different sorbent and metal concentrations. The adsorption process was fast, and equilibrium was reached within 3 h. The maximum removal was 100% for 25 mg l^?1 of Cr⁶⁺ concentration on 5 g l^?1 pomegranate husk concentration, and the maximum adsorption capacity was 10.59 mg g^?1. The kinetic data were analysed using various kinetic models—pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion equations—and the equilibrium data were tested using several isotherm models, Langmuir, Freundlich, Tempkin, Dubinin–Radushkevich, and Generalized isotherm equations. The Elovich and pseudo-second-order equations provided the greatest accuracy for the kinetic data, while Langmuir and Generalized isotherm models were the closest fit for the equilibrium data. The activation energy of sorption has also been evaluated as 0.236 and 0.707 kJ mol^?1 for 25 and 50 mg l^?1 chromium concentration, respectively.     

Removal of heavy metals from aqueous solutions using activated carbon prepared from Cicer arietinum

Removal of Cu²⁺, Cd²⁺, Pb²⁺, and Zn²⁺ from aqueous solutions by activated carbon prepared from stems and seed hulls of Cicer arietinum, an agricultural solid waste, has been studied. The influence of various parameters, such as pH, contact time, adsorbent dose, and initial concentration of metal ions on removal was evaluated. The activated carbon was characterized by FT-IR spectroscopy, X-ray diffraction, and elemental analysis. Sorption isotherms were studied using Langmuir and Freundlich isotherm models. All experimental sorption data were fitted to the sorption models using nonlinear least-squares regression. The maximum adsorption capacity values for activated carbon prepared from Cicer arietinum waste for metal ions were 18 mg g^?1 (Cu²⁺), 18 mg g^?1 (Cd²⁺), 20 mg g^?1 (Pb²⁺), and 20 mg g^?1 (Zn²⁺), respectively. The Freundlich isotherm model fit was best, followed by the pseudo-second-order kinetic model. Desorption studies were carried out with dilute hydrochloric acid for quantitative recovery of the metal ions and for regeneration of the adsorbent.     

Preparation and characterization of calcium alginate-based composite adsorbents for the removal of Cd,Hg, and Pb ions from aqueous solution

Composite adsorbent materials containing calcium alginate, clinoptilolite, and coal-derived humic acid were prepared. Humic acid (HA), clinoptilolite (CL), alginate (AL), alginate-entrapped humic acid (AL/HA), clinoptilolite (AL/CL), and humic acid/clinoptilolite (AL/HA/CL) samples were characterized. The effectiveness of the samples as adsorbents for the removal of cadmium (Cd), mercury (Hg), and lead (Pb) were studied in a series of batch-adsorption experiments. For the AL, AL/HA, AL/CL, and AL/HA/CL adsorbents, uptake versus time data were evaluated using two kinetic models, a linear and a non-linear pseudo-first-order and a pseudo-second-order model. The data for each metal ion on all adsorbents showed good correspondence with the pseudo-second-order kinetic model. The equilibrium data were fitted to Langmuir, Freundlich, Dubinin–Radushkevich, and Temkin isotherm models. The results show that a non-linear method seems more appropriate for obtaining isotherm parameters. The non-linear Freundlich and Langmuir models for Pb and Hg produced a best fit with high R ² value (0.99). For HA adsorbent, the equilibrium data for Cd removal better fit to the non-linear Dubinin–Radushkevich isotherm.     

The sorption of selenite from aqueous solutions by pyrite

Selenium (Se) is an essential trace nutrient for mammals; however, the range between deficit and toxic levels is narrow. In this study, the potential sorption of selenite onto pyrite particles from an aqueous solution was investigated. An intraparticle diffusion model was used to describe kinetic data of sorption, yielding diffusivity values of 5 × 10^?7 cm²/s. The Langmuir isotherm equation could be used to describe the experimental data. The fitting results indicated that b and {Se(IV)}_max have values of 0.37 L/mg and 3.49 mg/g, respectively. The sorption of selenite onto the surface of pyrite particles was dependent on a pH range of 2–12, and the quantity of sorption onto pyrite was negatively correlated with pH; that is, the amount of sorption onto pyrite increased with a decrease in pH. In addition, organic matter did not exert a significant effect on removal of selenite. With a reaction time greater than 1 week, sorption of selenite onto pyrite particles was found to partially reduce the amount of elemental Se.     

Kinetic and equilibrium models for the biosorption of Cr(III) on Streptomyces rimosus

This study focused on the biosorption of trivalent chromium onto mycelial bacterium (Streptomyces rimosus) biomass from effluent of tannery. The biomass was prepared by treatment with alkali. Fourier transforms-infra red analysis of the mycelial bacterial revealed the presence of carboxyl groups as possible binding sites. Experimental parameters affecting biosorption processes such as pH contact time were studied. Langmuir, Freundlich, and Temkin models were applied to describe the biosorption isotherms. The Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The biosorption capacity of S. rimosus biomass for trivalent chromium was found to be 83 mg g^?1 at pH 4.8 and 3 g L^?1 biomass dosage, 300 min equilibrium time and 20°C. Kinetic evaluation of experimental data showed that the biosorption processes of trivalent chromium followed pseudo-second-order kinetics well.     

Biosorption of hexavalent chromium and malachite green from aqueous effluents,using Cladophora sp.

Biosorption potential of green macroalgae Cladophora sp., (GAC) for the removal of hexavalent chromium (Cr(VI)) and malachite green (MG) from aqueous medium was investigated. Optimal conditions for biosorption experiments were determined as a function of initial pH, GAC dosage, temperature and initial concentration of Cr(VI) and MG. The biosorption equilibrium data were fitted with the isotherm models of Langmuir, Freundlich, Kiselev, Frumkin and Jovanovic, while the experimental data were analysed using the kinetic models such as pseudo-first-order, pseudo-second-order, Ritchie's and intraparticle diffusion. The Langmuir maximum biosorption capacity was calculated as 100.00?mg/g (Cr(VI)) and 142.85?mg/g (MG). The biosorption kinetic data showed better agreement with the pseudo-second-order kinetic model. The thermodynamic parameters indicated spontaneous and endothermic nature of the biosorption process for Cr(VI) removal, whereas exothermic in the case of MG removal. Furthermore, the biosorption efficiencies of the GAC reusability were found significant up to five cycles and tested using 0.1, 0.5 and 1.0?M HCl, respectively. The results of the present study indicated that GAC is a suitable biosorbent for the sequestration of Cr(VI) and MG from aqueous solutions.     

Removal of Cr(VI) from aqueous solutions by the culm of bamboo grass treated with concentrated sulfuric acid

We prepared a carbonaceous sorbent for Cr(VI) from the culm of Sasa kurilensis by dehydration with concentrated H₂SO₄. The removal of Cr(VI) by the sorbent was highly solution pH dependent and mainly governed by physicochemical sorption. The equilibrium data fit well in the Langmuir isotherm model and indicate the endothermic nature of the Cr(VI) sorption. The desorption experiments suggest that the Cr(VI) sorption is generally irreversible, owing to strong interaction of HCrO₄⁻ with the active sites of the sorbent.     

Magnetic particles precipitated onto wheat husk for removal of methyl blue from aqueous solution

Magnetic particles prepared via co-precipitation and impregnated onto wheat husk (MN-WH) were used for the removal of methyl blue (MB) from aqueous solution. Experiments were conducted in a batch mode for optimization regarding pH, contact time, adsorbent dose, initial dye concentrations, and temperature. Maximum adsorption (98%) was achieved at pH 5. The adsorption data were fitted into pseudo-first, pseudo-second, intraparticle diffusion, and Elovich equation revealing that adsorption followed pseudo-second-order kinetics. The four most common isotherm models, i.e. the Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich (D–R), were used to evaluate the data, with the best fit to a Langmuir isotherm (R² = 0.996), followed by a Freundlich isotherm (R² = 0.995), indicating monolayer adsorption of MB on the surface of MN-WH. Thermodynamic parameters calculated from the Van't Hoff equation revealed that the adsorption is exothermic (ΔHº = ?19.7 kJ mol^?1).     

Biosorption of Cd2+ and Cu2+ on immobilized Saccharomyces cerevisiae

The biosorption of Cd²⁺ and Cu²⁺ onto the immobilized Saccharomyces cerevisiae (S. cerevisiae) was investigated in this study. Adsorption kinetics, isotherms and the effect of pH were studied. The results indicated that the biosorption of Cd²⁺ and Cu²⁺ on the immobilized S. cerevisiae was fast at initial stage and then became slow. The maximum biosorption of heavy metal ions on immobilized S. cerevisiae were observed at pH 4 for Cd²⁺ and Cu²⁺. by the pseudo-second-order model described the sorption kinetic data well according to the high correlation coefficient (R ²) obtained. The biosorption isotherm was fitted well by the Langmuir model, indicating possible mono-layer biosorption of Cd²⁺ and Cu²⁺ on the immobilized S. cerevisiae. Moreover, the immobilized S. cerevisiae after the sorption of Cd²⁺ and Cu²⁺ could be regenerated and reused.     

Lead(II) and cadmium(II) removal from aqueous solution using processed walnut shell: kinetic and equilibrium study

The biosorption potential of processed walnut shell for Pb(II) and Cd(II) ions from aqueous solutions was explored. The effects of pH, contact time, initial ion concentration, and amount of dried adsorbent were studied in batch experiments. The maximum adsorption was achieved within the pH range 4.0–6.0. The equilibrium data were well fitted by the Langmuir isotherm model. The maximum monolayer adsorption capacities were found to be 32?g?kg^?1 and 11.6?g?kg^?1 for Pb(II) and Cd(II) ions, respectively. Kinetic data were best described by the pseudo-second-order model. The structural features of the adsorbent were characterized by Fourier transform infrared spectroscopy, which confirmed the involvement of hydroxyl (–OH), carboxyl (–COO^–), and carbonyl (C=O) groups in metal sorption. This readily available adsorbent is efficient in the uptake of Pb(II) and Cd(II) ions from an aqueous solution and could be used for the treatment of wastewater streams bearing these metal ions.     

Pomegranate husk as an adsorbent in the removal of toxic chromium from wastewater

The use of a new sorbent developed from the husk of pomegranate, a famous fruit in Egypt, for the removal of toxic chromium from aqueous solution has been investigated. The batch experiment was conducted to determine the adsorption capacity of the pomegranate husk. The effects of initial metal concentration (25 and 50 mg l^-1), pH, contact time, and sorbent concentration (2-6 g l^-1) have been studied at room temperature. A strong dependence of the adsorption capacity on pH was observed, the capacity increased as the pH decreased, and the optimum pH value was pH 1.0. Adsorption equilibrium and kinetics were studied with different sorbent and metal concentrations. The adsorption process was fast, and equilibrium was reached within 3 h. The maximum removal was 100% for 25 mg l^-1 of Cr⁶⁺ concentration on 5 g l^-1 pomegranate husk concentration, and the maximum adsorption capacity was 10.59 mg g^-1. The kinetic data were analysed using various kinetic models—pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion equations—and the equilibrium data were tested using several isotherm models, Langmuir, Freundlich, Tempkin, Dubinin-Radushkevich, and Generalized isotherm equations. The Elovich and pseudo-second-order equations provided the greatest accuracy for the kinetic data, while Langmuir and Generalized isotherm models were the closest fit for the equilibrium data. The activation energy of sorption has also been evaluated as 0.236 and 0.707 kJ mol^-1 for 25 and 50 mg l^-1 chromium concentration, respectively.     

Steam activation,characterisation and adsorption studies of activated carbon from maize tassels

In this paper, steam-produced activated carbon (STAC) from maize tassel (MT) was evaluated for its ability to remove basic dye (methylene blue MB) from aqueous solution in a batch adsorption process. The equilibrium experiments were conducted in the range of 50–300 mg/L initial MB concentrations at 30°C, for effect of pH, adsorbent dosage and contact time. The experimental data were analysed by Langmuir, Freundlich and Temkin isotherm models of adsorption. Freundlich adsorption isotherm was found to have highest value of R²(R²=0.97) compared to other models of Langmuir and Temkin having (0.96 and 0.95 respectively). STAC has a high adsorptive capacity for MB dye (200 mg/g) and also showed favourable adsorption for the dye with the separation factor (R_L<1) for the dye-activated carbon system. The kinetic data obtained were analysed using pseudo first-order kinetic equation and pseudo second-order kinetic equation. The experimental data fitted well into pseudo second-order kinetic equation, as demonstrated by the high value of R².     

Adsorption of cationic and anionic surfactants onto organic polymer resin Lewatit VPOC 1064 MD PH

The adsorption of a cationic (CTAB, cetyl trimethylammonium bromide) and an anionic surfactant (SLES, sodium dodecylethersulfate) from aqueous solution onto organic polymer resin (Lewatit VPOC 1064 MD PH) was studied. A series of batch experiments were performed to determine the sorption isotherms of surfactants to organic polymer resin. The experimental studies were analyzed by Langmuir and Freundlich isotherms. Furthermore, the isotherm parameters, average percentage errors (ε) of model data, and separation factor (R _L) were calculated. Other factors influencing the adsorption capacity (contact time, adsorbent amount, and initial surfactant concentration) were also discussed. The experimental data fitted very well to the Langmuir equilibrium model in the studied concentration range. The calculated R _L values showed that the adsorption of both surfactants were favorable. Among the surfactants, CTAB showed higher adsorption capacity onto organic polymer resin compared to SLES (Q ⁰ = 250 and 34.36 mg g⁻¹, respectively).     

Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces

This study examines the adsorption isotherms, kinetics and mechanisms of Pb2(+) sorption onto waste cow bone powder (WCBP) surfaces. The concentrations of Pb2(+) in the study range from 10 to 90 mg/L. Although the sorption data follow the Langmuir and Freundlich isotherm, a detailed examination reveals that surface sorption or complexation and co-precipitation are the most important mechanisms, along with possibly ion exchange and solid diffusion also contributing to the overall sorption process. The co-precipitation of Pb2(+) with the calcium hydroxyapatite (Ca-HAP) is implied by significant changes in Ca2(+) and PO?3? concentrations during the metal sorption processes. The Pb2(+) sorption onto the WCBP surface by metal complexation with surface functional groups such as ≡ POH. The major metal surface species are likely to be ≡ POPb(+). The sorption isotherm results indicated that Pb2(+) sorption onto the Langmuir and Freundlich constant q(max) and K( F ) is 9.52 and 8.18 mg g?1, respectively. Sorption kinetics results indicated that Pb2(+) sorption onto WCBP was pseudo-second-order rate constants K? was 1.12 g mg?1 h?1. The main mechanism is adsorption or surface complexation (≡POPb(+): 61.6%), co-precipitation or ion exchange [Ca?(.)?? Pb?(.)?? (PO?)? (OH): 21.4%] and other precipitation [Pb 50 mg L?1 and natural pH: 17%). Sorption isotherms showed that WCBP has a much higher Pb2(+) removal rate in an aqueous solution; the greater capability of WCBP to remove aqueous Pb2(+) indicates its potential as another promising way to remediate Pb2(+)-contaminated media.     

Removal of Janus Green dye from aqueous solutions using oxidized multi-walled carbon nanotubes

Multi-walled carbon nanotubes (MWCNTs) were oxidized and characterized by Fourier transform infrared spectroscopy. The adsorption characteristics of the oxidized MWCNT adsorbent were examined using Janus Green (JG) as adsorbate. In batch tests, the effects of pH, adsorbent dose, contact time, and temperature were studied. The maximum adsorption capacity was found to be 56 mg g^?1. The experimental data were fitted to the Langmuir, Freundlich, and Tempkin isotherm models, the first one being the most appropriate. Kinetic analysis showed that adsorption was most accurately represented by a pseudo-second-order model.     

Adsorptive removal of a synthetic textile dye using cocoa pod husks

The adsorption of a synthetic textile dye (Remazol Brilliant Black Reactive) on cocoa pod husk-based activated carbon was investigated in batch process. The adsorbent prepared was characterized by gas adsorption surface analysis (Brunauer Emmett Teller, BET), scanning electron microscopy, and Fourier transform infrared spectroscopy. The effects of initial dye concentration, contact time, solution temperature, and solution pH were evaluated. Equilibrium data were fitted to Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models, the first being the best with maximum monolayer coverage of 111?mg?g^?1. Kinetic data were fitted into pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models; the pseudo second-order model provided the best correlation. Maximum adsorption was observed at pH 7. Standard free energy, standard enthalpy, and standard entropy were also calculated. The adsorption interaction was found to be endothermic and spontaneous. Both the mean free energy of adsorption and the activation energy show that the mechanism is by physisorption.     

Ackee apple (Blighia sapida) seeds: a novel adsorbent for the removal of Congo Red dye from aqueous solutions

The ability of ackee apple (AA) seeds to remove Congo Red (CR) dye from aqueous solution was investigated. AA was characterised using thermo gravimetric analyser, scanning electron microscopy, Braunauer Emmett Teller, pH_pzc, elemental analysis and Boehm titration. The effects of operational parameters such as adsorbent dosage, contact time, initial dye concentration and solution pH were studied in a batch system. pH has a profound influence on the adsorption process. Maximum dye adsorption was observed at pH 3.0. The reaction was fast, reaching equilibrium in 90 min. Adsorption data were best described by Langmuir isotherm and the pseudo-second-order kinetic model with a maximum monolayer coverage of 161.89 mg·g^?1. Both boundary layer and intraparticle diffusion mechanisms were found to govern the adsorption process. Thermodynamic parameters such as standard free energy change (Δ G ⁰), standard enthalpy change (Δ H ⁰), and standard entropy change (Δ S ⁰) were studied. Values of Δ G ⁰ varied between?30.94 and?36.56 kJ·mol^?1, Δ H ⁰ was 25.61 kJ·mol^?1, and Δ S ⁰ was 74.84 kJ·mol^?1·K^?1, indicating that the removal of CR from aqueous solution by AA was spontaneous and endothermic in nature. Regeneration and reusability studies were carried out using different eluents. AA gave the highest adsorption efficiency up to four cycles when treated with 0.3 M HCl. AA was found to be an effective adsorbent for the removal of CR dye from aqueous solution.     

Adsorption of caesium from aqueous solution using cerium molybdate–pan composite

In this study, a cerium molybdate–polyacrylonitrile (CM–PAN) composite ion exchanger was synthesised and its characteristics were determined by X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermogravimetry (TGA), specific area measurement (BET), X-ray fluorescence and CHN elemental analyses. The adsorption of caesium from aqueous solutions by CM–PAN composite was investigated under batch and continuous conditions. The distribution coefficient of caesium on the composite sorbent was studied as a function of pH, solution temperature and the presence of interfering cations, and the optimum conditions for a batch system were determined. Pseudo-first- and second-order sorption kinetic models were used to investigate the kinetics of adsorption and the results pointed to the pseudo-second-order model for caesium sorption kinetics. The intraparticle diffusion model was used to the predict rate-limiting step of the ion exchange process in order to specify the sorption mechanism. Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models were fitted to the experimental sorption data, where the Freundlich model showed a good agreement. The adsorption thermodynamic parameters, standard enthalpy, entropy and Gibbs’ free energy were calculated and the reaction was found to be endothermic and spontaneous. Finally, the dynamic sorption capacities of the sorbent at two breakthroughs were calculated from the continuous system.     

Effect of dye auxiliaries on chemical oxygen demand and colour competitive removal from textile effluents using Posidonia oceanica

The use of an abundant and widely distributed seagrass species, Posidonia oceanica, as a biosorbent for the direct dye Yellow 44 was successfully shown. The studies were performed on the single dyestuff dissolved in water and in a dyebath containing agents commonly used in the textile industry, i.e. a surfactant (Lavotan TBU), a sequestring agent (Meropan DPE), a softening agent (Eurosoft CI10) and a salt (NaCl). The colour reduction results showed that P. oceanica was found to be more efficient for removal of Yellow 44 from an aqueous solution (162 mg g^?1) than from a dyebath solution (135 mg g^?1), according to the Langmuir isotherm model. For the single dyestuff sorption, Fourier transform infrared and X-ray photoelectron spectroscopy studies highlighted chemical sorption between the dye alcohol function and the sorbent acid function. The chemical oxygen demand removal percentages were found to be 54.9 and 76.6% for Yellow 44 dissolved in aqueous solution and in dyebath solution, respectively. This confirmed the both sorption of the chemical auxiliaries and the dye on P. oceanica.