Redesigning a collection system for "small" consumer electronics

This paper establishes that the collection system within the recycling scheme for consumer electronics in the Netherlands has not been entirely successful in convincing consumers to hand in their used appliances by means of dedicated collection routes. Particularly regarding small appliances, consumers are persisting in their habit of discarding their appliances by means of the refuse bag/bin for regular household waste. Therefore, the current collection system has been unable to direct consumer behavior in the desired direction. Consequently, the layout of the current system is reviewed and redesigned in order to tackle this problem. This design effort applies the Triad model (behavioral model) in the analysis stage and the Morphological Chart method (design tool) in the synthesis stage, and results in a concrete proposal for a new system. Finally, the applicability of this design approach beyond the specific circumstances of the case study presented in this paper is discussed. This case represents only one example of the broader, worldwide challenge to design appropriate collection systems to direct consumer behavior in desired directions. It is argued that the approach presented in this paper could be a valuable contribution to research dealing with this challenge.     

Impact of DOM from composted "alperujo" on soil structure, AM fungi, microbial activity and growth of Medicago sativa

Water-soluble extracts from compost may represent an alternative nutrient and organic matter source for crop production under drip irrigation. Dissolved organic matter (DOM), extracted from composted "alperujo", the main by-product from the Spanish olive oil industry, was applied to soil alone or in combination with either Glomus intraradices Schenck and Smith or a mixture of G. intraradices, Glomus deserticola (Trappe, Bloss. and Menge) and Glomus mosseae (Nicol and Gerd.) Gerd. and Trappe. Response measurements included mycorrhizal colonisation, nutrient uptake and growth of Medicago sativa and microbiological and physical properties in the rhizosphere. Dissolved organic matter was added to soil at concentrations of 0, 50, 100 or 300mgCkg(-1) substrate. During the four months of the experiment, the plants were harvested three times. Both mycorrhizal inoculation treatments significantly increased soil aggregate stability. Only the mycorrhizal inoculations increased microbial biomass C and protease and phosphatase activities and decreased water-soluble C, particularly the mixture of arbuscular mycorrhizal fungi. At the third harvest, the greatest increase in growth of M. sativa was observed in the inoculated plants with shoot biomass being 38% greater than for plants grown in the soil amended with the highest dose of DOM and 57% greater than for control plants. The addition of DOM was not sufficient to restore soil structure and microbial activity and did not affect the mycorrhizal development of introduced populations of arbuscular mycorrhizal fungi, but, depending on the dose, its fertiliser efficiency for improving plant growth was apparent.     

New Poly(aniline-<Emphasis Type="Italic">co</Emphasis>-<Emphasis Type="Italic">o</Emphasis>-phenylenediamine)/Kaolinite Microcomposites for Water Decontamination

Copolymers of aniline and o-phenylenediamine/kaolinite composites were synthesized by 5:1 molar ratios of the respective monomers with different percentages of nanoclay via modified in situ chemical co-polymerization. The results were verified by measuring the FT-IR and UV–vis absorption spectra for PANI-o-PDA/kaolinite composites. The thermal behaviour of the copolymer and composites was studied. PANI-o-PDA/kaolinite composites were thermally more stable than pure copolymer. Surface morphology of copolymer composites was recorded at different magnification power by SEM which revealed whitish micrometric beads distributed all over the field with particle size in the range of 0.122–0.233 μm. This work demonstrates that the PANI-o-PDA/kaolinite composites particles can be considered as potential adsorbents for hazardous and toxic metal ions of water from lake El-Manzala, Egypt. All of Cd(II), Cu(II), and Pb(II) posed dangerous health risk to the local population via fish consumption.     

A Microscopic Study of Paper Decayed by <Emphasis Type="Italic">Trichoderma harzianum</Emphasis> and <Emphasis Type="Italic">Paecilomyces variotii</Emphasis>

The current study is interested in evaluating the decay of cotton, Whatman and chemical pulp caused by Trichoderma harzianum and Paecilomyces variotii. The structural changes of the paper were evaluated by Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). The SEM results show differences in hyphae colonization and paper decay patterns between studied species under the current study; P. variotii caused an eroded structure in the cotton (cavity forming), whereas the initial T. harzianum colonization produced rupture and erosion (soft-rot decay type II) for the three types of paper ,the gaps were elongated with sharp pointed ends, which consisted either of individual cavities or in chains. Moreover, FTIR results confirmed that there a relationship could be observed between fungal decay and crystalline cellulose content because the intensity of peaks at 1335 and 1111 cm^?1 significantly decreased due to the fungal decay. Furthermore, the intensity of O–H stretching absorption slightly decreased, and this may be attributed to hydrolysis of cellulose molecules.     

Physical Characterization of Biodegradable Films Based on Chitosan,Polyvinyl Alcohol and <Emphasis Type="Italic">Opuntia</Emphasis> Mucilage

This study aimed to develop and characterize biodegradable films containing mucilage, chitosan and polyvinyl alcohol (PVA) in different concentrations. The films were prepared by casting on glass plates using glycerol as plasticizer. Mechanical properties, water vapor and oxygen barrier, as well as the interaction with water, were measured. The compatibility of the film-forming components and the uniformity of the films were determined by zeta potential and SEM, respectively. The glycerol and mucilage allowed obtaining more hydrophilic films. The barrier properties of the films made from 100 % chitosan were similar to composed films containing PVA up to 40 %. The results of this study suggest that the interaction between chitosan and mucilage could increase water vapor permeability. The films prepared from either 100 % chitosan or PVA showed a more hydrophobic behavior as compared to the composed films. The films were homogenous since no boundary or separation of components was observed, indicating a good compatibility of the components in the films.     

Purification and biochemical characterization of recombinant alcohol dehydrogenase from the psychrophilic bacterium <Emphasis Type="Italic">Pseudomonas</Emphasis><Emphasis Type="Italic">frederiksbergensis</Emphasis>

A gram-negative psychrophilic bacterium, with potential for biodegradation of long-chain n-alkanes was isolated from ice samples collected in Spitzbergen, Denmark. On the basis of results of biochemical and morphological tests and sequence analysis of 16S rRNA, the strain was identified as Pseudomonas frederiksbergensis. In this work, a short-chain NAD⁺-dependent alcohol dehydrogenase (alcDH) (Accession number: AAR13804) from the P. frederiksbergensis was cloned and transformed in E. coli BL21 (3DE) competent cells. The alcDH activity was highest in the crude extract of cells induced with 1.0 mM IPTG. The recombinant alcDH enzyme was purified to 93.4% homogeneity using three consecutive purification steps including ammonium sulphate, Q-Sepharose Fast Flow column and gel filtration chromatography employing Superdex 200 10/30 HR column. Enzyme enrichment and yield levels of 31.4 folds and 25.5%, respectively, were achieved. While the subunit molecular mass of the enzyme was determined on SDS-PAGE to be ~38 kDa, the aggregated native form of the enzyme had a molecular mass of ~238 kDa by gel filtration analysis. Reaction conditions optima for the recombinant alcDH were determined with propan-1-ol as the substrate. While the optimum pH was 9, the optimum temperature was 35 °C. The alcDH enzyme exhibited moderate thermal stability with half-lives of 150 min at 55 °C, 27 min at 65 °C and 8 min at 75 °C. Results for kinetic parameters indicated that the apparent K _m value for alcDH with propan-1-ol as the substrate was found to be 1.42 mM and the V _max value was 0.63 mmol mg⁻¹ min⁻¹. Experimental evidence revealed that the recombinant alcDH exhibited a wide range of substrate specificity, with higher levels of specific activity for aliphatic alcohols as compared to secondary alcohols. Taken together, the present study highlights the potential of alcDH as a member of cold-adapted enzymes in several key biotechnological applications including environmental bioremediation and biotransformations. It is envisaged that, with the ongoing screening of microorganisms and metagenomes, directed evolution approaches and the subsequent overexpression of recombinant proteins, more enzymes will be found that are suitable for bioremediation purposes.     

Production,Characterization and Bioemulsifying Activity of an Exopolysaccharide Produced by <Emphasis Type="Italic">Sphingomonas</Emphasis> sp. Isolated from Freshwater

This study aimed to evaluate the emulsion stability of solutions containing exopolysaccharide and culture medium of a Sphingomonas sp. strain with various hydrophobic compounds. The exopolysaccharide characterized belongs to a sphingan group, however, not being a gellan gum as produced by certain Sphingomonas strains. In general, the emulsifying indexes found in this study were above 70% for gasoline, hexane, kerosene and used frying oil. Nonetheless, the best results were achieved in kerosene solutions, which showed an index of 80% after 24 h, remaining stable for more than 168 h in combinations with various EPS concentrations. Interestingly, diesel oil best results were singly achieved in solution pH of 11, showing an index of around 65%. Furthermore, hexane obtained an index of 100% after 24 h when culture medium was used. Thus, these findings highlight the use of EPS as a potential bioemulsifier agent to enhance hydrocarbon degradation and emulsification effects in environmental biotechnology.     

Biodegradable Compatibilized Poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide)/Thermoplastic Polyurethane Blends: Design,Preparation and Property Testing

Biodegradable blends of poly(l-lactide) (PLL) toughened with a polycaprolactone-based thermoplastic polyurethane (TPU) elastomer and compatibilized with a purpose-designed poly(l-lactide-co-caprolactone) (PLLCL) copolymer were prepared. Both 2-component (PLL/TPU) and 3-component (PLL/TPU/PLLCL) blends of various compositions were prepared by melt mixing, hot-pressed into thin films and their properties tested. The results showed that, although the TPU could toughen the PLL, the blends were immiscible leading to phase separation with the TPU domains distributed in the PLL matrix. However, addition of the PLLCL copolymer could partially compatibilize the blend by improving the interfacial adhesion between the two phases. Biodegradability testing showed that the blends were biodegradable and that the PLLCL copolymer could increase the rate of biodegradation under controlled composting conditions. The 3-component blend of composition PLL/TPU/PLLCL?=?90/10/10 parts by weight was found to exhibit the best all-round properties.     

Ecotoxicity Evaluation of the Biodegradable Polymers PLA,PBAT and its Blends Using <Emphasis Type="Italic">Allium cepa</Emphasis> as Test Organism

Biodegradable polymers are considered a feasible option to minimize the environment impacts of high disposal of solid waste. Nevertheless, environmental safety of these materials is a few explored issue. In this context, this study evaluated ecotoxicological effects in soil of the biodegradable materials poly(lactic acid)-PLA, poly(butylene adipate co-terephthalate)-PBAT and their blends compatibilized with a chain extender. The tool used for this analysis was the bioassay with Allium cepa as test organism. The studied materials were not phytotoxic, cytotoxic, genotoxic nor mutagenic for meristematic cells of A. cepa.     

Gene Cloning and Characterization of a Poly(<Emphasis Type="SmallCaps">l</Emphasis>-Lactic Acid) Depolymerase from <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. Strain DS04-T

A gene encoding a poly(l-lactic acid) (PLA) depolymerase from Pseudomonas sp. strain DS04-T was cloned and overexpressed in Escherichia coli. The recombinant PLA depolymerase with a molecular weight of 19.2 kDa was purified to homogeneity. The optimum pH and temperature of the PLA depolymerase are 8.5 and 60 °C, respectively. K⁺, Ca²⁺ and Ni²⁺ enhance the enzyme activity, while Na⁺, Zn²⁺, Mg²⁺, Cu²⁺, Fe²⁺, Mn²⁺ and Co²⁺ inhibit it. The inhibition of different chemicals on the PLA depolymerase activity were examined, in which EDTA was found to have a significantly inhibitory effect. The main degradation product of the depolymerase is identified as lactic acid monomer by mass spectrometric analysis. Physicochemical properties, substrate specificity and sequence analysis indicated that PME is a new type of PLA depolymerase.     

Catalytic co-pyrolysis of <Emphasis Type="Italic">Pterospermum acerifolium</Emphasis> and plastic waste

The continuous increase in generation of solid wastes and gradual declining of fossil fuels necessities the development of sustainable conversion technologies. Recent studies have shown that the addition of biomass with hydrogen-rich co-reactants (plastics) altogether enhances the quality of bio-fuels using pyrolysis process. It was observed that red mud (which is produced as by-product in Bayer process) was used as a catalyst in few conversion process. In this study, pyrolysis of biomass (Pterospermum acerifolium) and waste plastic mixture with activated red-mud catalyst was investigated using thermo-gravimetric analysis. The kinetic parameters (activation energy and pre-exponential factor) of this process were determined using distributed activation energy model (DAEM). The DAEM was effectively applied to decide the activation energy (E) and pre-exponential factor (A) for each sample at various conversions during the catalytic co-pyrolysis. The biomass, plastic, biomass–plastic, and biomass–plastic–catalyst exhibited activation energies in the ranges of 78–268, 172–218, 67–307, and 202–292 kJ/mol, respectively.     

Water Retention Capacity of Polysaccharides from Prickly Pear Nopals of <Emphasis Type="Italic">Opuntia Ficus Indica</Emphasis> and <Emphasis Type="Italic">Opuntia Litoralis</Emphasis>: Physical–Chemical Approach

Polysaccharides were isolated from nopals mucilage pulp and peel of Opuntia Ficus Indica (OFI) and Opuntia litoralis (OL) by aqueous extraction and purified by ultrafiltration. Studying the glycosyl residue composition, these polysaccharides were assumed to be rhamnogalacturonan I (RG-I). The macromolecular features of these compounds have been characterized by SEC/MALLS and by low shear viscosimetry. In the present work, we have undertaken a comparative study about different polysaccharides resulting from OFI and OL growing in different area. This comparison is to see the influence of the geographical area in which these two plants push on the mechanism of retention of water by the different polysaccharides extract. The polysaccharides resulting from the nopal peels of the two plants are highly methylated (>70%), thus they are much more hydrophobic especially for peels of OFI growing in the desert area than those resulting from pulps. Consequently, they probably prevent the evaporation of water in nopals by increasing their water retention capacity. Prickly pear nopals of OFI and OL contain a significant amount of water (>80%), carbohydrates (75% compared to the soluble matter), proteins (8% compared to the soluble matter) and salt (17% compared to the soluble matter). Thus, they represent an important source of water and alimentation especially in the arid and semi-arid areas.     

Achieving "Final Storage Quality" of municipal solid waste in pilot scale bioreactor landfills

Entombed waste in current sanitary landfills will generate biogas and leachate when physical barriers fail in the future, allowing the intrusion of moisture into the waste mass contradicting the precepts of the sustainability concept. Bioreactor landfills are suggested as a sustainable option to achieve Final Storage Quality (FSQ) status of waste residues; however, it is not clear what characteristics the residues should have in order to stop operation and after-care monitoring schemes. An experiment was conducted to determine the feasibility to achieve FSQ status (Waste Acceptance Criteria of the European Landfill Directive) of residues in a pilot scale bioreactor landfill. The results of the leaching test were very encouraging due to their proximity to achieve the proposed stringent FSQ criterion after 2 years of operation. Furthermore, residues have the same characteristics of alternative waste stabilisation parameters (low BMP, BOD/COD ratio, VS content, SO4(2-)/Cl- ratio) established by other researchers. Mass balances showed that the bioreactor landfill simulator was capable of practically achieving biological stabilisation after 2 years of operation, while releasing approximately 45% of the total available (organic and inorganic) carbon and nitrogen into the liquid and gas phases.     

Biodegradation of Poly-ε-caprolactones and Poly-<Emphasis Type="SmallCaps">l</Emphasis>-lactides by Fungi

This work assessed biodegradation, by Aspergillus, Fusarium, Penicillium and Parengyodontium fungi, of four samples of poly-ε-caprolactone (PCL), three samples of poly-l-lactide (PLA) and one sample of poly-d,l-lactide (DL-PLA) produced by ring-opening polymerization initiated by aluminium complexes of corresponding lactones. Mesophilic fungal strains actively biodegrading PCL (F. solani) and PLA (Parengyodontium album and A. calidoustus) were selected. The rate of degradation by the selected fungi was found to depend on the physicochemical and mechanical properties of the polymers (molecular weight, polydispersity, crystallinity). The most degradable poly-ε-caprolactone sample was shown to have the lowest molecular weight; the most biodegradable polylactide DL-PLA had the lowest crystallinity. Mass spectral analysis of biodegraded polymer residues showed PCL to be degraded more intensively than PLA. It is established that in the case of Parengyodontium album the colonization of the films of polypropylene composites with DL-PLA is observed, which will undoubtedly contribute to their further destruction under the influence of abiotic factors in the environment.     

Blending Modification of PHBV/PCL and its Biodegradation by <Emphasis Type="Italic">Pseudomonas mendocina</Emphasis>

Poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) is a biodegradable polymer synthesized in microorganisms. The application of PHBV is limited by certain material disadvantages. Poly(ε-caprolactone) (PCL) possesses excellent thermodynamic and mechanical properties and was used to modify PHBV in the presence of triethyl citrate (TEC) and dicumyl peroxide (DCP), which was used as plasticizer and grafting agent, respectively. The effects of PCL and additive agents on the mechanical, thermal, amphipathic and degradability behaviors of the blends were investigated. The results showed that the mechanical properties of the PHBV blends improved by PCL incorporation and improved even further after TEC and DCP addition. The addition of DCP could not induce an increase in crystallization temperature but improved the crystallization degree of the blends. The presence of hydrophilic groups in TEC leads to an apparent increases in the hydrophilicity of the PHBV blends. A PHBV/PCL blend (40/60) with TEC (20 wt.%) and DCP (0.5 wt.%) was chosen for its good mechanical properties and hydrophilicity. The chosen ratio of the blends was also shown a preferable degradation activity by biodegradation assay using Pseudomonas mendocina. The addition of TEC and DCP has no conspicuous negative effect on the biodegradation.     

Online first publication of <Emphasis Type="Italic">Journal of material cycles and waste management</Emphasis>

Announcement

Online first publication of Journal of material cycles and waste management     

Mechanism and Characterization of Polyamide 4 Degradation by <Emphasis Type="Italic">Pseudomonas</Emphasis> sp.

We identified a biodegrading microorganism of polyamide (nylon) 4, a linear polymer of γ-aminobutyric acid (GABA). From activated sludge, the biodegrading bacteria strains of Pseudomonas sp. were isolated and identified by their taxonomic characteristics and nucleotide sequences of 16S rDNA. One strain, ND-11, was grown on a minimal medium containing polyamide 4 (PA4) as the sole carbon source. The strain produced GABA as a degradation intermediate, as identified by analyzing the NMR spectra of degraded products. The culture supernatant of strain ND-11 degraded the emulsified PA4 completely within one day. These results suggest that the ND-11 strain degraded PA4 using its extracellular enzymes to hydrolyze amide bonds.     

Effect of Solvent Composition on Porosity,Surface Morphology and Thermal Behavior of Metal Alginate Prepared from Algae (<Emphasis Type="Italic">Undaria pinnatifida</Emphasis>)

Alginates, extracted from algae are linear unbranched polymers containing β-(1→4)-linked d-mannuronic acid (M) and α-(1→4)-linked l-guluronic acid (G) residues. The conversion of alginic acid into the metal alginate is confirmed using FTIR spectroscopy. Asymmetric and symmetric stretching of free carboxyl group present in metal alginate occurs almost at the same position in various solvent compositions. Total intrusion volume of metal alginate prepared in propanol (0.0742 mL/g) is greater compared to those in ethanol (0.0648 mL/g) and methanol (0.0393 mL/g) as solvent. Surface morphology as well as porosity and pore size distribution of metal alginate are greatly influenced by solvent. It can be seen from thermal analysis results that calcium alginate prepared using different solvent compositions started decomposing at 100 °C, but rapid degradation started around 200 °C. The results showed a stepwise weight loss during thermal sweep, indicating different types of reactions during degradation. First and second step of rapid degradation was situated around 200–300 and 300–550 °C, respectively; whereas the final step is situated around 550–650 °C. The trend of degradation was similar for all the solvents, although the amount of final residue varied from one solvent to another. At the same time, lower thermal stability was also observed with higher heating rates. Additionally, a kinetic analysis was performed to fit with TGA data, where the entire degradation process has been considered as three consecutive first order reactions.