An integrated test strategy for the assessment of anaerobic biodegradability of wastewaters

The anaerobic biodegradability of wastewaters from different chemical plants was determined by an integrated test strategy consisting of an anaerobic toxicity test, a static anaerobic biodegradation test and a continuously operated fixed bed reactor test. This integrated procedure offered a useful tool for screening wastewaters for anaerobic biodegradability. Four different wastewaters were tested for anaerobic toxicity and biodegradability. One wastewater was used in subsequent testing in a fixed bed reactor which aimed to illustrate a potential design of an anaerobic treatment plant.     

Aerobic inhibition assessment for anaerobic treatment effluent of antibiotic production wastewater

Biological treatment of antibiotic production effluents is an economical approach; however, there are still difficulties to overcome because of the recalcitrant characteristics of these compounds to biodegradation. This study aims to reveal that anaerobic treatment technology can be an option as pretreatment before the activated sludge system treatment to treat antibiotic production effluents. The ISO 8192 method was chosen to test the inhibitory effect of raw and treated antibiotic production effluents in this work. Inhibition tests, which were applied according to ISO 8192, highlighted that the anaerobic treatment effluent is less inhibitory than antibiotic production effluent for activated sludge system. Early EC₅₀ concentrations (30-min values) of raw and treated wastewaters were lower than 180-min values. Also, triple effects (sulfamethoxazole–erythromycin–tetracycline) of antibiotics are more toxic than dual effects (sulfamethoxazole–tetracycline). In light of the experimental results obtained and their evaluation, it can be concluded that anaerobic digestion can be applied as a biological pretreatment method for pharmaceutical industry wastewater including antibiotic mixtures prior to aerobic treatment.     

Comparison of bioluminescence and nitrification inhibition methods for assessing toxicity to municipal activated sludge

The aim of this study was to compare two alternative toxicity assessment methods to determine wastewater toxicity and predict treatment plant process upsets. The toxicity of two synthetic organic compounds (triclosan and 4-n-nonylphenol), which are commonly detected in municipal wastewater, and municipal and industrial wastewaters with different heavy metals content were evaluated by the nitrification inhibition assay and bioluminescence toxicity test. Comparison between both assays confirmed that Vibrio fischeri is generally more sensitive than autotrophic bacteria, and, if not calibrated, the bioluminescence method tends to overestimate toxic effects on activated sludge biomass. The nitrification inhibition assay appears to predict plant process upsets more accurately. Both methods showed a significant toxicity decrease through treatment that could be partially attributed to the significant heavy metals removal obtained by primary and secondary treatment. A good correlation for the two assays was obtained, as indicated by a high correlation coefficient (r2 = 0.80).     

Characterization and modeling of nutrient-deficient tomato-processing wastewater treatment using an anaerobic/aerobic system

Tomato-processing wastewaters are typical of slowly biodegradable high strength wastewaters generated from the food canning industry. Three different samples of influent and three samples of anaerobic effluents corresponding to the three influents collected from an on-site pilot-scale anaerobic/aerobic system were characterized using respirometric methods. Respirometric studies demonstrated that the pretreatment in the anaerobic reactor of the pilot-scale system increased the readily biodegradable fraction from an average of 40% of the SCOD in the influent to 50% of the SCOD in the anaerobic effluent, improved kinetics from an average micro(max) of 1.5d(-1) in the influent to 3.5d(-1) in the anaerobic effluent, and eliminated nutrient deficiency. Furthermore, the system was calibrated and simulated by application of wastewater characterization and biokinetic data derived form respirometric tests of influent and anaerobic effluent in Activated Sludge Model no.1 (ASM1).     

Occurrence and abundance of tetracycline,sulfonamide resistance genes,and class 1 integron in five wastewater treatment plants

To understand the transport and fate of antibiotic resistance genes in wastewater treatment plants, 12 resistance genes (ten tetracycline resistance genes, two sulfonamides genes) and class 1 integron gene (intI1) were studied in five wastewater treatment plants with different treatment processes and different sewage sources. Among these resistance genes, sulfonamides genes (sul1 and sul2) were of the most prevalent genes with detection frequency of 100 %. The effluent water contained fewer types of resistance genes than the influent in most selected plants. The abundance of five quantified resistance genes (tetG, tetW, tetX, sul1, and intI1) decreased in effluent of plants treating domestic or industrial wastewater with anaerobic/aerobic or membrane bioreactor (MBR) technologies, but tetG, tetX, sul1, and intI1 increased along the treatment units of plants treating vitamin C production wastewater by anaerobic/aerobic technology. In plant treating cephalosporins production wastewater by UASB/aerobic process, the quantities of tetG, tetX, and sul1 first decreased in anaerobic effluent water but then increased in aerobic effluent water.     

Fate and transformation of naphthylaminesulfonic azo dye Reactive Black 5 during wastewater treatment process

Certain aromatic amines generated by the decolorization of some azo dyes are not removed substantially by conventional anaerobic–aerobic biotreatment. These aromatic amines are potentially toxic and often released in the wastewater of industrial plants. In this study, the fate and transformation of the naphthylaminesulfonic azo dye Reactive Black 5 (RB5) during different phases of a sequencing batch reactor were investigated. The major products of RB5 decolorization during the anaerobic phase include 2-[(4-aminophenyl)sulfonyl]ethyl hydrogen sulfate (APSEHS) and 1-2-7-triamino-8-hydroxy-3-6-naphthalinedisulfate (TAHNDS). During the aerobic phase, APSEHS was hydrolyzed and produced 4-aminobenzenesulfonic acid, which was further degraded via dearomatization. TAHNDS was transformed rapidly via auto-oxidation into TAHNDS_DP-1 and TAHNDS_DP-2, which were not further removed by the activated sludge during the entire 30-day aerobic phase. In contrast, different behaviors of TAHNDS were observed during the anoxic phase. The transformation of TAHNDS was initiated either by deamination or desulfonation reaction. TAHNDS was then converted into 3,5-diamino-4-hydroxynaphthalene-2-sulfonic acid, which was subsequently removed via ring cleavage reaction under aerobic condition. In conclusion, complete degradation of TAHNDS by activated sludge occurs only during anoxic/aerobic processes instead of the conventional anaerobic/aerobic processes.     

A comparative study on characterization of textile wastewaters (untreated and treated) toxicity by chemical and biological tests

Toxicity of textile wastewaters (untreated and treated) and their ingredient chemicals was quantified in terms of their chemical characteristics, fish (Gambusia affinis) mortality and end point growth responses of duckweed (Lemna aequinoctialis) in short-term bioassays. Other parameters of fish bioassay were erythrocyte morphology and its counts. Despite of a definite correlation between data of biological tests (LC/EC(50) values) with that of chemical tests, biological tests were found to be relatively more sensitive to both wastewaters and ingredient chemicals. Amongst all the examined parameters of test organisms, fish RBCs (morphology and counts) sensitivity to pollutants in the wastewaters was usually maximum and therefore, their study should be included in the routine fish bioassay. Other advantage of biological test such as on Lemna is even detection of eutrophic potential of wastewaters, as noted at their higher dilutions. The ingredient chemicals (major) contributing maximum toxicity to textile dye wastewater were, acids (HCl and H(2)SO(4)), alkali (Na(2)O SiO(2)), salt (NaNO(2)) and heavy metal (Cu), whereas dyes (4) were relatively less toxic.     

水解酸化-厌氧-好氧法处理NF合成制药废水研究

研究了序批式水解酸化 厌氧 好氧生物处理工艺对NF合成制药废水的处理。由于NF制药废水中含有大量有毒有机化合物 ,在生物处理过程中这些有毒物质会抑制活性污泥的活性 ,因此需经过适当稀释原水以达到处理单元可接受的毒性范围。采用BODTrack快速测定了不同原水稀释条件下活性污泥呼吸曲线第一段斜率的变化 ,结果表明 ,当原水稀释 2 0倍以上后 ,对活性污泥的活性没有明显的抑制。通过批量实验 ,优化了工艺的运行条件 ,并进行了小试的连续运行。采用本工艺可以达到NF制药废水COD的稳定高效去除 ,结果显示 ,COD的去除率可达 76 %。     

Sulphonated aromatic pollutants

Many synthetic sulphonated aromatic compounds are used as starting material to produce dyes and pigments, or are released as by-products in the effluents of the textile and dye industry. A large number of these chemicals are poorly biodegradable and cannot be eliminated by classical wastewater treatment plants. To limit the impact of these pollutants on the environment, new processes, based on the use of higher plants (constructed wetlands or hydroponic systems), are under development. Detergents and surfactants are essential for both industrial and domestic applications, the most important family being the alkylbenzene sulphonates. Originally, the alkyl side chains were branched and thus recalcitrant to biodegradation. Therefore, they have been replaced by linear alkylbenzene sulphonates. Although more acceptable, present formulations still have adverse environmental and toxic effects. In this context, phytoremediation appears to be a promising approach to remove these compounds from contaminated soils and waters.     

Biodegradation of phenol in refinery wastewater by pure cultures of Pseudomonas aeruginosa NCIB 950 and Pseudomonas fluorescence NCIB 3756

The potential of microorganisms to catabolise and metabolise xenobiotic compounds has been recognised as a potentially effective means of toxic and hazardous wastes disposal. Phenol and its derivatives have long been recognised as some of the most persistent chemicals in petroleum refinery wastewaters, with high toxicity even at low concentrations. Biodegradation of these compounds has been recognised as a potential solution for their disposal owing to its cost effectiveness and simplicity. Two species of pseudomonas, P. aeruginosa and P. fluorescence, were studied for their biodegradation potential on phenol present in a refinery wastewater under a batch fermentation process. Phenol was successfully degraded by both species, and there was high positive correlation between phenol biodegradation and microbial growth. The maximum specific growth rate were obtained for both species from the Haldane model. The study revealed the high potential of these local strains, with P. aeruginosa being more effective, and the possibility of using them in bioremediation of petroleum refinery wastewaters.     

The digestibility of waste activated sludges.

Laboratory digestion studies using waste activated sludges (WAS) were conducted to compare the digestion performance between anaerobic and aerobic processes. Nine samples of WAS from seven wastewater treatment plants were collected and batch-digested under both anaerobic and aerobic conditions for 30 days at 25 degrees C. The cation content of wastewater (both floc and solution phases) and solution biopolymer (protein and polysaccharide) was measured before and after digestion and compared with volatile solids destruction data. The study revealed that each digestion process was associated with a distinct biopolymer fraction, which accounted for differences in volatile solids reduction under anaerobic and aerobic conditions. The anaerobic digestion data showed strong correlations between soluble protein generation, ammonium production, percent volatile solids reduction, and floc iron (Fe). These data suggest that the amount of volatile solids destroyed by anaerobic digestion depends on the Fe content of floc. In aerobic digestion, polysaccharide accumulated in solution along with calcium and magnesium. For aerobic digestion, correlations between divalent cation release and the production of inorganic nitrogen were found. This implies that divalent cation-bound biopolymer, thought to be lectin-like protein, was the primary organic fraction degraded under aerobic conditions. The results of the study show that the cation content in wastewater is an important indicator of the material that will digest under anaerobic or aerobic conditions and that some of the volatile solids will digest only under either anaerobic or aerobic conditions.     

Integrated physicochemical and biological treatment process for fluoride and phosphorus removal from fertilizer plant wastewater

The phosphate fertilizer industry produces highly hazardous and acidic wastewaters. This study was undertaken to develop an integrated approach for the treatment of wastewaters from the phosphate industry. Effluent samples were collected from a local phosphate fertilizer producer and were characterized by their high fluoride and phosphate content. First, the samples were pretreated by precipitation of phosphate and fluoride ions using hydrated lime. The resulting low- fluoride and phosphorus effluent was then treated with the enhanced biological phosphorus removal (EBPR) process to monitor the simultaneous removal of carbon, nitrogen, and phosphorus. Phosphorus removal included a two-stage anaerobic/aerobic system operating under continuous flow. Pretreated wastewater was added to the activated sludge and operated for 160 days in the reactor. The operating strategy included increasing the organic loading rate (OLR) from 0.3 to 1.2 g chemical oxygen demand (COD)/L.d. The stable and high removal rates of COD, NH4(+)-N, and PO4(3-)-P were then recorded. The mean concentrations of the influent were approximately 3600 mg COD/L, 60 mg N/L, and 14 mg P/L, which corresponded to removal efficiencies of approximately 98%, 86%, and 92%, respectively.     

Biodegradation of triclosan and formation of methyl-triclosan in activated sludge under aerobic conditions

Triclosan is an antimicrobial agent which is widely used in household and personal care products. Widespread use of this compound has led to the elevated concentrations of triclosan in wastewater, wastewater treatment plants (WWTPs) and receiving waters. Removal of triclosan and formation of triclosan-methyl was investigated in activated sludge from a standard activated sludge WWTP equipped with enhanced biological phosphorus removal. The removal was found to occur mainly under aerobic conditions while under anoxic (nitrate reducing) and anaerobic conditions rather low removal rates were determined. In a laboratory-scale activated sludge reactor 75% of the triclosan was removed under aerobic conditions within 150 h, while no removal was observed under anaerobic or anoxic conditions. One percent of the triclosan was converted to triclosan-methyl under aerobic conditions, less under anoxic (nitrate reducing) and none under anaerobic conditions.     

Combination of in vitro bioassays for the determination of cytotoxic and genotoxic potential of wastewater, surface water and drinking water samples

In this study we evaluated genotoxicity and cytotoxicity of native samples of wastewaters (15 samples), surface waters (28 samples) and potable waters (8 samples) with the SOS/umuC assay with Salmonella typhimurium TA1535/pSK1002 and MTT assay with human hepatoma HepG2 cells. The genotoxicity of selected samples was confirmed with the comet assay with HepG2 cells. In the SOS/umuC assay 13 out of the 51 samples were genotoxic: two effluent samples from chemical industry; one sample of wastewater treatment plant effluent; two hospital wastewater samples; three river water samples and four lake water samples. Six samples were cytotoxic for HepG2 cells: both effluent samples of chemical industry, two wastewater treatment plant effluent samples, and two river water samples, however, only the chemical industry effluent samples were genotoxic and cytotoxic, indicating that different contaminants are responsible for genotoxic and toxic effects. Comparing genotoxicity of river and lake water samples with the chemical analytical data of the presence of the residues of pharmaceutical and personal care products (non-steroidal anti-inflammatory drugs, UV filters and disinfectants) in these samples, indicated that the presence of UV filters might be linked to the genotoxicity of these samples. The results showed that the application of the bacterial SOS/umuC assay and mammalian cell assays (MTT and comet assay) with HepG2 cells was suitably sensitive combination of assays to monitor genotoxicity and cytotoxicity of native samples of wastewaters and surface waters. With this study we also confirmed that the toxicity/genotoxicity bioassays should be an integral tool in the evaluation of toxicity of complex wastewaters before the release into environment, as well as for the monitoring of surface water quality, providing data useful in risk assessment.     

Occurrence of estrogenic effects in sewage and industrial wastewaters in Beijing, China

Estrogenic potencies of the effluents or water samples from wastewater treatment plants (WWTPs), industries and hospitals and some receiving rivers in Beijing city were estimated by using a human estrogen receptor recombinant yeast assay. Estrogenic activity of industrial wastewaters was found to range from 0.1 to 13.3 ng EEQ/L and decreased to the range of 0.03-1.6 ng EEQ/L after treatment. Estrogenic activity in WWTP influent ranged from 0.3 to 1.7 ng EEQ/L and decreased to the range of 0.05-0.5 ng EEQ/L after treatment. In the receiving river waters, the estrogenic effect range was 0.1-4.7 ng EEQ/L. These data suggest that treated industrial effluents and WWTP effluents of concern are not the only source of estrogenic pollution in surface waters in Beijing city. EEQ levels in Beijing river water are likely attributable to untreated municipal and industrial wastewaters discharged directly into the river.     

Persistence of perfluoroalkylated substances in closed bottle tests with municipal sewage sludge

BACKGROUND, AIM, AND SCOPE: Perfluoroalkylated substances (PFAS) are chemicals with completely fluorinated alkyl chains. The specific properties of the F-C bond give PFAS a high stability and make them very useful in a wide range of applications. PFAS also pose a potential risk to the environment and humans because they have been recently characterized as persistent, bioaccumulative, and toxic. The objective of this work is to study the bacterial degradation of PFAS under aerobic and anaerobic conditions in municipal sewage sludge as a contribution toward understanding their environmental fate and behavior. MATERIALS AND METHODS: Bacterial communities from sewage sludge were exposed to a mixture of PFAS under aerobic or anaerobic conditions. Individual PFAS concentrations were determined in the experiment media at different exposure times using liquid chromatography-mass spectrometry analysis after extraction with solid-phase extraction. RESULTS: The PFAS analyses of samples of sludge showed repeatable replicate results, allowing a reliable quantification of the different groups of PFAS analyzed. No conclusive evidence for PFAS degradation was observed under the experimental conditions tested in this work. Reduction in concentrations, however, was observed for some PFAS in sludge under aerobic conditions. DISCUSSION: The largest concentration decrease occurred for the fluorotelomer alcohols (FTOHs), especially for the 8:2 FTOH, which have been described as biodegradable in the literature. However, this concentration decrease could be due to different causes: sorption to glass, septa, or matrix components, as well as bacterial activity. Therefore, it is not certain that biodegradation occurred. CONCLUSIONS: PFAS are very recalcitrant chemicals, especially when fully fluorinated. Although some decreases in concentration have been observed for some PFAS, such as the FTOHs, there is no conclusive evidence for biodegradation. It can be concluded that the PFAS tested in these experiments are non-biodegradable under these experimental conditions. RECOMMENDATIONS AND PERSPECTIVES: Since the presence of PFAS is ubiquitous in the environment and they can be toxic, more research is needed in this field to elucidate which PFAS are susceptible to biodegradation, the conditions required for biodegradation, and the possible routes followed. A possible inhibitory effect of PFAS on bacteria, the threshold concentrations, and conditions of inhibition should also be investigated.     

Evaluation of the toxicity of substances to be assessed for biodegradability

The ability to distinguish between true non-biodegradability, and inhibition of biodegradability due to the toxic effects of the compound tested present problems. It results in possible false identification of substances as non-biodegradable.Six chemicals were evaluated in a variety of tests to assess their toxicity to aerobic sludge organisms. The tests employed were: BOD₅ and Closed Bottle inhibition tests, inhibition of respiration of activated sludge, growth inhibition of activated sludge, light emission from (MICROTOX test) and the repetitive die-away test (RDA). Results from these tests were compared with results obtained from a number of ready biodegradability tests using the compounds listed above at anticipated non-toxic and toxic concentrations.No test method evaluated consistently forecast toxicity due to the chemicals tested. The MICROTOX and nitrification inhibition tests were too sensitive. A combination of sludge respiration rate and/or growth tests seem most appropriate. To avoid toxicity to the sludge, biodegradability testing should be made at 10% of the EC₅₀ value. Compounds with an EC₅₀ value greater than 300 mg/l are unlikely to be toxic in ready biodegradability tests. Compounds with an EC₅₀ value of less than 20 mg/l may pose problems necessitating the use of the stringent closed bottle test, or the use of C¹⁴ labelled test materials. Compounds with an intermediate EC₅₀ that is between 20–300 mg/l, need to be evaluated at a range of concentrations in biodegradability tests, or may need to be evaluated carefully to define the precise no-effect level. Procedure recommendations to distinguish between the inhibition of biodegradability and inertness of the test substance are made.     

Monitoring the toxicity of phenolic chemicals to activated sludge using a novel optical scanning respirometer.

This paper reports the development of optical scanning respirometer for determining the toxicity of chemicals to activated sludge. The respirometer is used to measure the dissolved oxygen concentration by monitoring the luminescence intensity of ruthenium dye immobilized in a polymer film in contact with the wastewater sample. The intensity is related to the extent of oxygen quenching of luminescence. The toxicity of chemicals can be evaluated by measuring the inhibition on respiration rate of microorganism using the scanning respirometer. The IC50 values (concentration of a chemical that exhibits 50% respiration inhibition) of various phenolic chemicals in activated sludge were determined. The performance of this method is compared with other toxicity methods. The experimental results indicate that the reproducibility and sensitivity of this respirometer are reasonably good.     

Denitrification with acrylamide by pure culture of bacteria isolated from acrylonitrile-butadiene-styrene resin manufactured wastewater treatment system

Acrylamide is widely used in industrial applications as cement binder and solidification agent. Due to its carcinogenicity and toxicity, discharge of acrylamide to the natural water and soil systems may lead to an adverse environmental impact on water quality and thus endanger public health and welfare. This study attempts to isolate and identify the denitrifying bacteria, which utilize acrylamide as the substrate from the acrylonitrile-butadiene-styrene resin manufactured wastewater treatment system. The performance of the denitrifying bacteria for treating different initial acrylamide concentrations was also investigated under aerobic and anaerobic conditions. The test results indicated that the Pseudomonas stutzeri could remove acrylamide at concentrations below 440 mg/l under aerobic conditions. The acrylic acid and ammonia intermediates were used as carbon and nitrogen sources, respectively. However, P. stutzeri did not show the capability of metabolizing acrylonitrile under aerobic conditions. Furthermore, the P. stutzeri could utilize both acrylamide and acrylic acid in the presence of nitrate (denitrification) and acrylamide could be removed completely from the wastewater.     

染料工业废水零排放的可行性研究

染料废水是目前难治理的工业废水之一.通过对某染料厂还原蓝生产废水的研究,提出了利用残余硫酸制取硫酸亚铁水处理剂,滤渣在一般锅炉内焚烧的综合利用和治理工艺.从而探索和实践了少污染,回收利用等综合治理污染的工艺,力求尝试一种"零排放"和"绿色化学"的化工生产过程.