Synthesis of a block copolymer of poly(3-hydroxybutyrate) and poly(ethylene glycol) and its application to biodegradable polymer blends

A block copolymer {P[(R,S)-HB-b-EG]} of atactic poly[(R,S)-3-hydroxybutyrate] {P[(R,S)-HB]} and poly(ethylene glycol) (PEG) was prepared by the ring-opening polymerization of -butyrolactone in the presence of a macroinitiator (PEG/ZnEt₂/H₂O) which had been produced by the reaction of ,-dihydroxy PEG ( _n=3000) with ZnEt₂/H₂O (1/0.6) catalyst. The block copolymer ( _n=10,500, _w/ _n=1.2) was an A-B-A triblock copolymer comprising atactic P[(R,S)-HB] (A) and PEG (B) segments. The miscibility, physical properties, and biodegradability of binary blends of microbial poly[(R)-3-hydroxybutyrate] {P[(R)-HB]} with the block copolymer P[(R,S)-HB-b-EG] has been studied. The glass-transition temperature (T _g) data showed that the P[(R)-HB]/P[(R,S)-HB-b-EG] blend was miscible in the amorphous state. The P[(R)-HB] film became flexible and tough by means of blending with P[(R,S)-HB-b-EG] block copolymer. The enzymatic degradation of blend films was carried out at 37°C and pH 7.4 in a 0.1M phosphate solution of an extracellular PHB depolymerase fromAlcaligenes faecalis. The enzymatic degradation took place solely on the surface of the blend films.     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.     

Crystallization behavior of predominantly syndiotactic poly(β-hydroxybutyrate)

Predominantly syndiotactic poly(-hydroxybutyrate), syn-PHB, of variable syndioregularity (syndyad fractions 0.59, 0.62, 0.64, and 0.71) and molecular weight was prepared by the dibutyltin dimethoxide catalyzed ring opening of racemic-butyrolactone (BL). The crystallization behavior of the syn-PHB polymers was investigated by DSC and X-ray diffraction analyses. DSC of films after melting and annealing showed at least one, and often two distinct melting transitions occuring over a broad (often 40°C) temperature range. These results indicate that syn-PHB chain segments of variable syndioregularity form crystalline regions with very different thermodynamic stabilities. Maximum degrees of crystallinity for melt annealed 0.64- and 0.71-syn-PHB was observed at an annealing temperature (T _c ) of 30°C. AtT _c values at 45°C and higher, crystallization of relatively lower syndioregular chain segments was apparently excluded to variable degrees dependent onT _c and sample syndiotactic dyad content. After crystallization of syn-PHB samples at elevated temperatures, ambient temperature annealing resulted in an observed lower temperature melting transition at 50°C. This result showed little to no dependence on syn-PHB syndio-regularity andT _c . Both solution precipitated 0.62-syn-PHB and 0.71-syn-PHB have WAXS patterns with poorly resolved crystalline reflections superimposed on amorphous haloes indicating low levels of crystallinity (17% and 25%, respectively) and poorly formed crystals. Isothermal crystallization monitored by DSC showed that the syn- and natural origin PHB showed fastest crystallization rates at temperatures between 50°C and 70°C and 60°C and 90°C, respectively. From the dependence of the higher melting transition onT _c it was determined that the equilibrium melting temperatures for 0.62-syn-PHB (M _n =83,700 g/mol) and a 0.64-syn-PHB (M _n =11,900 g/mol) were 157 and 154°C, respectively. An Avrami analysis of syn-PHB yielded results similar to that found for natural origin PHB indicating that crystal growth occurs by a two-dimensional mechanism.Guest Editor: Dr. Graham Swift, Rohm & Haas.     

Effect of Crystalline and Amorphous Structures on Biodegradability of Poly(Tetramethylene Succinate)

The effect of orientation in the amorphous and crystalline regions on the biodegradability of PTMS [poly(tetramethylene succinate)] was studied using the amorphous orientation function, birefringence, and crystallinity. The crystalline and amorphous intrinsic lateral sonic moduli, E _t,c ⁰ and E _t,am ⁰ , were 2.61 × 10³ and 0.41 × 10³ MPa, respectively. Using the data on birefringence, crystalline and amorphous orientation function (f and f _am), crystallinity, and sonic modulus of the oriented PTMS fibers, the intrinsic birefringence of the crystalline ( _c ⁰ ) and amorphous ( _am ⁰ ) regions were evaluated to be 0.0561 and 0.0634, respectively. The biodegradabilities of oriented PTMS films were reduced as the elongation increased, i.e., the amorphous orientation increased. At low elongation (100 and 150%), however, biodegradabilities remained unchanged when the degradation test was performed in activated sludge, which was attributed to the amorphous orientation occurring even at 100% elongation, though the amorphous orientation direction was perpendicular to the fiber axis.     

Effect of Poly(dioxolane) as Compatibilizer in Poly(ɛ-caprolactone)/Tapioca Starch Blends

The influence of poly(dioxolane) (PDXL), a poly(ethylene oxide-alt-methylene oxide), as compatibilizer on poly(ɛ-caprolactone) (PCL)/tapioca starch (TS) blends was studied. In order to facilitate blending; PCL, PDXL and TS must be blended together directly; so that PDXL is partially adhered at the TS surface as shown by scanning electron microscopy. The molecular weight effect of PDXL on the PCL/TS blends showed that mechanical properties of PCL/TS/PDXL blends from low molecular weight (M _n=10,000) and high molecular weight (M _n=200,000) PDXL were rather dependent on TS content. The enzymatic degradability of PCL/TS/PDXL blends using α-amylase increased as the TS content increased but was independent on the dispersion of tapioca starch in the PCL matrix.     

Anaerobic digestion of chicken feather with swine manure or slaughterhouse sludge for biogas production

Biogas production from anaerobic digestion of chicken feathers with swine manure or slaughterhouse sludge was assessed in two separate experiments. Ground feathers without any pre-treatment were added to 42-L digesters inoculated with swine manure or slaughterhouse sludge, representing 37% and 23% of total solids, respectively and incubated at 25 °C in batch mode. Compared to the control without feather addition, total CH₄ production increased by 130% (P < 0.001) and 110% (P = 0.09) in the swine manure and the slaughterhouse sludge digesters, respectively. Mixed liquor NH₄N concentration increased (P < 0.001) from 4.8 and 3.1 g/L at the beginning of the digestion to 6.9 and 3.5 g/L at the end of digestion in the swine manure and the slaughterhouse sludge digesters, respectively. The fraction of proteolytic microorganisms increased (P < 0.001) during the digestion from 12.5% to 14.5% and 11.3% to 13.0% in the swine manure and the slaughterhouse sludge digesters with feather addition, respectively, but decreased in the controls. These results are reflective of feather digestion. Feather addition did not affect CH₄ yields of the swine manure digesters (P = 0.082) and the slaughterhouse sludge digesters (P = 0.21), indicating that feathers can be digested together with swine manure or slaughterhouse sludge without negatively affecting the digestion of swine manure and slaughterhouse sludge.     

Correlating the Spatial Distribution of Atmospheric Ammonia with δ15N Values at an Ammonia Release Site

A field ammonia (NH₃) release experiment and open top chambers containing moorland monoliths continuously fumigated with NH₃ or sprayed with NH₄Cl were used to assess the potential for using ¹⁵N values in determining the area of influence around a point NH₃ emission source. ¹⁵N values are being increasingly used as environmental tracers and we tested the hypothesis that the ¹⁵N signal from an NH₃ emission source is observable in nearby vegetation. Using modified monitoring devices, atmospheric NH₃ concentrations were found to decrease with distance from source, with ¹⁵N values also reflecting this trend, producing a signal shift with changing concentration. Open top chamber studies of ¹⁵N values of Calluna vulgaris (L.) Hull indicated a correlation with deposition treatments in current year shoots. Analysis of Calluna shoots from the NH₃ release showed a similar trend of ¹⁵N enrichment. Significant linear correlations between ¹⁵N and percent N in plant material were found, both in the controlled conditions of the open top chambers and at the NH₃ release site, illustrating the possible use of this technique in N deposition biomonitoring.     

Photodegradation of Poly(lactic acid) Stereocomplex by UV-Irradiation

Neat poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) films and PLLA/PDLA blend films were prepared by solution casting, and their photodegradation by UV-irradiation was investigated using wide-angle X-ray scattering (WAXS), gel permeation chromatography, differential scanning calorimetry, tensile testing, and polarized optical microscopy. The PLLA/PDLA blend film was more photodegradation-resistant than the neat PLLA and PDLA films when photodegradation was monitored by molecular weight, melting temperature, and WAXS crystalline peak positions. This indicates that the chains in both amorphous and crystalline regions of the PLLA/PDLA blend film were photo-cleavage-resistant compared to those of the neat PLLA and PDLA films. The changes in melting temperature and WAXS crystalline peak positions before and after photodegradation respectively indicated the increased crystalline lattice disorder and the decreased crystalline lattice sizes of the neat PLLA and PDLA films, whereas these changes were insignificant for the blend films. Photodegradation caused no significant change in tensile properties, with the exception of significant decreases in the tensile strength and elongation at break of PLLA/PDLA blend film. However, the tensile strength and elongation at break of the PLLA/PDLA blend film retained higher values compared to those of the neat PLLA and PDLA films during photodegradation. In spite of the slower photodegradation of the PLLA/PDLA blend film traced by M _n, T _m, and WAXS crystalline peak positions than that of neat PLLA and PDLA films, the rapid decrease in tensile strength and elongation at break of the former than that of the latter should be due to the highly-ordered structural difference between them, i.e., the three dimensional dry gel of the former and the spherulites of the latter.     

Influence of Short Central PEO Segment on Hydrolytic and Enzymatic Degradation of Triblock PCL Copolymers

Hydrolytic, enzymatic degradation and composting under controlled conditions of series of triblock PCL/PEO copolymers, PCEC, with central short PEO block (M _n 400 g/mol) are presented and compared with homopolymer (PCL). The PCEC copolymers, synthesized via ring-opening polymerization of ε-caprolactone, were characterized by ¹H NMR, quantitative ¹³C NMR, GPC, DSC and WAXS. The introduction of the PEO central segment (<?2 wt%) in PCL chains significantly affected thermal degradation and crystallization behavior, while the hydrophobicity was slightly reduced as confirmed by water absorption and moisture uptake experiments. Hydrolytic degradation studies in phosphate buffer after 8 weeks indicated a small weight loss, while FTIR analysis detected changes in crystallinity indexes and GPC measurements revealed bulk degradation. Enzymatic degradation tested by cell-free extracts containing Pseudomonas aeruginosa PAO1 confirmed high enzyme activity throughout the surface causing morphological changes detected by optical microscopy and AFM analysis. The changes in roughness of polymer films revealed surface erosion mechanism of enzymatic degradation. Copolymer with the highest content of PEO segment and the lowest molecular weight showed better degradation ability compared to PCL and other copolymers. Furthermore, composting of polymer films in a model compost system at 37 °C resulted in significant degradation of the all synthesized block copolymers.     

Poly(hydroxyalkanoate) Biosynthesis from Crude Alaskan Pollock (Theragra chalcogramma) Oil

Six strains of Pseudomonas were tested for their abilities to synthesize poly(hydroxyalkanoate) (PHA) polymers from crude Pollock oil, a large volume byproduct of the Alaskan fishing industry. All six strains were found to produce PHA polymers from hydrolyzed Pollock oil with productivities (P; the percent of the cell mass that is polymer) ranging from 6 to 53% of the cell dry weight (CDW). Two strains, P. oleovorans NRRL B-778 (P = 27%) and P. oleovorans NRRL B-14682 (P = 6%), synthesized poly(3-hydroxybutyrate) (PHB) with number average molecular weights (M_n) of 206,000 g/mol and 195,000 g/mol, respectively. Four strains, P. oleovorans NRRL B-14683 (P = 52%), P. resinovorans NRRL B-2649 (P = 53%), P. corrugata 388 (P = 43%), and P. putida KT2442 (P = 39%), synthesized medium-chain-length PHA (mcl-PHA) polymers with M_n values ranging from 84,000 g/mol to 153,000 g/mol. All mcl-PHA polymers were primarily composed of 3-hydroxyoctanoic acid (C_8:0) and 3-hydroxydecanoic acid (C_10:0) amounting to at least 75% of the total monomers present. Unsaturated monomers were also present in the mcl-PHA polymers at concentrations between 13% and 16%, providing loci for polymer derivatization and/or crosslinking. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

The Relationship Between the Chemical Structure of Poly(alkylene glycol)s and Their Aerobic Biodegradability in an Aqueous Environment

The relationship between the chemical structure of poly(alkylene glycol)s (PAGs) and their biodegradability was studied using a set of polymeric fluids that included poly(ethylene glycol), poly(propylene glycol) (PPG), random copolymers of ethylene oxide (EO) and propylene oxide (PO) differing in the EO/PO ratio as well as PAGs capped with ether or acyl moieties. The PAGs that were tested had an average molecular weight (MW) in the range of 350–3,600 Da and differed in their polymer backbones by either linear (diol type) or branched (triol type) molecules. The ultimate biodegradability of the PAGs was determined according to ISO 14593 (CO₂ headspace test) with a non-pre-exposed (as in OECD 310 test) and pre-exposed (adapted) inoculum. PAGs with the structure of PPG and copolymers of EO/PO of diol or triol structures with average molecular weights lower than 1,000 Da can be considered as readily biodegradable. Their ultimate biodegradation exceeds the limit of 60 % (according to the criteria of the OECD 310 test). PAGs with a copolymer structure and MW values ranging between 1,000 and 3,600 Da are not readily biodegradable, but they can be considered as those of inherent ultimate biodegradability. The increased EO content in PAG structures and the acylation of the terminal hydroxyl groups with carboxylic acids favourably influenced their biodegradability. Capped PAGs containing terminal ether groups appeared to be resistant to biodegradation.     

Degradation and mineralization of cellulose acetate in simulated thermophilic compost environments

Residual cellulose acetate (CA) films with initial degree of substitution (DS) values of 1.7 and 2.5 (CA DS-1.7 and DS-2.5) were recovered from a simulated thermophilic compost exposure and characterized by gel permeation chromatography (GPC), proton nuclear magnetic resonance (¹H NMR), and scanning electron microscopy (SEM) to determine changes in polymer molecular weight and DS and to study microbial colonization and surface morphology, respectively. During the aerobic degradation of CA DS-1.7 and CA DS-2.5 films exposed for 7 and 18 days, respectively, the number-average molecular weight (M _n) of residual polymer decreased by 30.4% on day 5 and 20.3% on day 16, respectively. Furthermore, a decrease in the degree of substitution from 1.69 to 1.27 (4-day exposure) and from 2.51 to 2.18 (12-day exposure) was observed for the respective CA samples. In contrast, CA films (DS-1.7 and DS-2.5) which were exposed to abiotic control vessels for identical time periods showed no significant changes inM _n and DS. SEM photographs of CA (DS-1.7 and DS-2.5) film surfaces after compost exposures revealed severe erosion and corresponding microbial colonization. Similar exposure times for CA films in abiotic control vessels resulted in only minor changes in surface characteristics by SEM observations. The conversion of CA DS-1.7 and DS-2.5 to CO₂ was monitored by respirometry. In these studies, powdered CA was placed in a predigested compost matrix which was maintained at 53°C and 60% moisture content throughout the incubation period. A lag phase of 10- and 25-day duration for CA DS-1.7 and DS-2.5, respectively, was observed, after which the rate of degradation increased rapidly. Mineralization of exposed CA DS-1.7 and DS-2.5 powders reported as the percentage theoretical CO₂ recovered reached 72.4 and 77.6% in 24 and 60 days, respectively. The results of this study demonstrated that microbial degradation of CA films exposed to aerobic thermophilic laboratory-scale compost reactors not only results in film weight loss but also causes severe film pitting and a corresponding decrease in chainM _n and degree of substitution for the residual material. Furthermore, conversions to greater than 70% of the theoretical recovered CO₂ for CA (DS 1.7 and 2.5) substrates indicate high degrees of CA mineralization.Guest Editor: Dr. Graham Swift, Rohm & Haas.     

Effects of Electron-Beam Irradiation and Ultraviolet Light (365 nm) on Polylactic Acid Plastic Films

Strips of Ca-I [polylactic acid (PLA) monolayer plastic films from Cargill Dow Polymers LLC, Minnetonka, MN] cut in the machine and nonmachine directions were irradiated with an electron beam using a CIRCLE III Linear Accelerator (MeV Industries S.A., Jouy-en-Josas, Cedex, France). The effects of 33-kGy irradiation on the physical properties of the Ca-I strips were studied. In addition, the effects of ultraviolet (UV) light (365-nm) illumination on the degradation of three PLA plastic films, Ch-I (PLA monolayer plastic films from Chronopol, Golden, CO), GII (PLA trilayer plastic films from Cargill Dow Polymers LLC), MN), and Ca-I (PLA monolayer plastic films from Cargill Dow Polymers LLC) were analyzed by a modified ASTM D5208-91 method. Results showed that irradiation had decreased the weight-average molecular weight (M _w), stress at break, percentage of elongation, and strain energy of Ca-I by 35.5, 26.7, 32.3, and 44.8%, respectively (P < 0.01). The shelf life of the irradiated Ca-I strips at 5°C and <20 ± 5% RH was about 6 months. The degradation rate of Ch-I, GII, and Ca-I with no UV light treatment at 55°C and 10% RH was 2512, 5618, and 3785 M _w/week, respectively. Under the UV light illumination (365 nm), the degradation rate of Ch-I, GII, and Ca-I, was 2982, 8722, and 7467 M _w/week, respectively. Hence, the degradation rate of GII and Ca-I was increased 55 and 97% by UV light (P < 0.008), respectively. This trend was not observed in Ch-I because its starting M _w (78,000 g/mol) was close to the tensile strength lost range (50,000 to 75,000 g/mol) of PLA films. To our knowledge, this is the first study to demonstrate that UV light does further enhance the degradation of PLA films.     

Solid State Reactions of Potato Starch with Urea and Biuret

Reaction of granular potato starch with urea and biuret resulted in the formation of products, which were soluble neither in cold nor boiling water. The net reaction was a monosubstitution of the hydrogen atom in one hydroxyl group in each D-glucose unit of starch with the either CO–NH₂ or CO–NH–CO–NH₂ moiety, respectively. Properties of the products, particularly these with urea, depended on the mode of reaction. Reactions were carried out in the microwave oven as well as with convection heating. The products retained the granular form of starch but a vast majority of granules were damaged. -Amylolysis of those materials revealed that their susceptibility to the enzyme increasing in the order: starch-amylolysis with simultaneous insolubility in water make these products suitable as ruminant fodder and, eventually, biodegradable material.     

Active Bio-composite Sodium Alginate/Maltodextrin Packaging Films for Food Containing Azolla pinnata Leaves Extract as Natural Antioxidant

The aim of the current work was to produce sodium alginate (SA) maltodextrins (MD) based functional films incorporated with phenolic extract of Azolla pinnata leaves fern (AF) by solution molding technique. AF with different concentrations (0.8, 1.2 and 1.6% w/w) were integrated inside SA.MD films. The resulted films were characterized to investigate the surface structure by scanning electron microscope (SEM), thermal disposal by (DSC), crystallization by X-ray diffraction (XRD), potential interaction by (FT-IR) and some mechanical properties. The SEM micrographs indicated that the higher concentration (1.6%) of AF extract caused development of wrinkles on the surface of films. And as a result, there were a significant decrease of elongation at break (EB) and tensile strength properties of films to 55.01 and 58.42%, respectively. By continues addition of AF extract to SA.MD films, the film thickness increased from 0.124 to 0.181 mm, the scavenging and antimicrobial properties were enhanced by the attendance of ferulic acid, rutin, thiamine, tamarixetin, astragalin, quercetin, chlorogenic acid and epicatechin inside extracts. Furthermore, the films solubility, swelling degree and water vapor permeability were decreased to 13.08%, 26.41% and 1.662?×?10^??10 g H₂O/m s p.a. The resulted films could be utilized as composite packaging material for different food applications.

     

Degradation of poly(3-hydroxybutyrate), PHB,by bacteria and purification of a novel PHB depolymerase fromComamonas sp.

Bacteria capable of growing on poly(3-hydroxybutyrate), PHB, as the sole source of carbon and energy were isolated from various soils, lake water, activated sludge, and air. Although all bacteria utilized a wide variety of monomeric substrates for growth, most of the strains were restricted to degrade PHB and copolymers of 3-hydroxybutyrate and 3-hydroxyvalerate, P(3HB-co-3HV). Five strains were also able to decompose a homopolymer of 3-hydroxyvalerate, PHV. Poly(3-hydroxyoctanoate), PHO, was not degraded by any of the isolates. One strain, which was identified asComamonas sp., was selected, and the extracellular depolymerase of this strain was purified from the medium by ammonium sulfate precipitation and by chromatography on DEAE-Sephacel and Butyl-Sepharose 4B. The purified PHB depolymerase was not a glycoprotein. The relative molecular masses of the native enzyme and of the subunits were 45,000 or 44,000, respectively. The purified enzyme hydrolyzed PHB, P(3HB-co-3HV), and—at a very low rate—also PHV. Polyhydroxyalkanoates, PHA, with six or more carbon atoms per monomer or characteristic substrates for lipases were not hydrolyzed. In contrast to the PHB depolymerases ofPseudomonas lemoignei andAlcaligenes faecalis T₁, which are sensitive toward phenylmethylsulfonyl fluoride (PMSF) and which hydrolyze PHB mainly to the dimeric and trimeric esters of 3-hydroxybutyrate, the depolymerase ofComamonas sp. was insensitive toward PMSF and hydrolyzed PHB to monomeric 3-hydroxybutyrate indicating a different mechanism of PHB hydrolysis. Furthermore, the pH optimum of the reaction catalyzed by the depolymerase ofComamonas sp. was in the alkaline range at 9.4.     

Enzyme-Mediated Reactions of Oligosaccharides and Polysaccharides

Two types of enzymatic reactions are given here as examples of synthetic problems encountered in industry. In the first case, commercially available -D-galactosidase from Escherichia coli was used as a catalyst to transfer galactose from -lactose to oligosaccharides. A preference for galactosyl transfer to the 3- or 4-position of the sugar moiety of the oligosaccharide was observed for the products. As expected, only the -anomer was produced. A wide variety of sugars, including disaccharides, trisaccharides, cellotetraose, and maltodextrins, has been shown to act as acceptors, yielding oligosaccharides. In the second example, -galactomannan that had been previously treated to contain cationic groups (cationic guar gum) was subjected to treatment with a series of inexpensive commercial enzymes such as lipases, protease, and cellulases. Some enzyme preparations showed significant changes in the viscosities of 1% cationic guar solution. For example, lipases from Aspergillus niger and Aspergillus saitoi and protease XIII from Rhizopus niveus produced a substantial viscosity reduction (0–20% of original viscosity). These examples demonstrate the utility of low-cost enzymes in manipulating polymer structures.     

Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.     

Aerobic thermophilic bacteria enhance biogas production

The enhancing effect of aerobic thermophilic (AT) bacteria on the production of biogas from anaerobically digested sewage sludge (methanogenic sludge) was investigated. Sewage sludge (5%, w/w) was incubated at 65°C with shaking for a few months to prepare the AT seed sludge. AT sludge was prepared by incubation of the AT seed sludge (5%, v/v) and sewage sludge (5%, w/w) at 65°C with shaking. The addition of this AT sludge (1.2% ± 0.5% of total volatile solids) to methanogenic sludge enhanced the production of biogas. The optimum volume of the addition and the pretreatment temperature of the AT sludge for optimum biogas production were 5% (v/v) and 65°C. Batch-fed anaerobic digestion was covered with the addition of various AT sludges. The AT sludge prepared with the AT seed sludge improved the biogas production by 2.2 times relative to that from the sewage sludge addition. The addition of sludge without AT seed sludge weakly enhanced biogas production. An aerobic thermophilic bacterium (strain AT1) was isolated from the AT seed sludge. Strain AT1 grew well in a synthetic medium. The production of biogas from the anaerobic digestion of sewage sludge was improved by the addition of 5% (v/v) AT1 bacterial culture compared with that from the sewage sludge addition. The addition of AT1 culture reduced the volatile solids by 21%, which was higher than the 12.6% achieved with the sewage sludge addition. The AT1 bacterial culture enhanced the biogas production more than the AT seed sludge. The phylogenetic analysis of the 16S rRNA gene revealed that strain AT1 is closely related to Geobacillus thermodenitrificans (100% sequence similarity). The improvement in the production of biogas with the AT sludge could be caused by thermophilic bacterial activity in the AT sludge.     

Mechanical Properties and Lipase-Catalyzed Biodegradation of α-Methyl, ε-Caprolactone/ ε-Caprolactone Copolymers Obtained by Chemical Modification of Poly(ε-caprolactone)

Novel (-caprolactone)-based copolymers of different compositions were synthesized by allowing methyl iodide to react with the polycarbanion that resulted from the action of lithium diisopropylamide on poly(-caprolactone) in THF at –70°C under argon atmosphere. The copolymers were characterized by various techniques, namely ¹H nuclear magnetic resonance, size exclusion chromatography, differential scanning calorimetry, x-ray diffraction and viscoelasticimetry. They were submitted to hydrolytic and lipase-catalyzed enzymatic degradation in comparison with genuine PCL. The Young modulus depended on the degree of methylation. In contrast, loss angle and glass transition temperature did not depend on this parameter. It is shown that the lipase-catalyzed degradation of methylated PCL is much slower than in the case of genuine PCL.