Degradation of aquatic humic material by ultraviolet light

Natural humic water was treated with ultraviolet (UV) light and UV + hydrogen peroxide (UV/H₂O₂. The effects on the dissolved organic carbon content (DOC), the UV-absorbance at 254 nm (UV-abs.), the molecular size distribution, pH, and mutagenic activity were monitored, and the identity and concentrations of the most abundant gas chromatographable organic degradation products were determined.

The DOC content and the UV-abs. of the water decreased substantially during treatment with UV/H₂O₂. The decreases were dependent on the time of irradiation (UV dose) as well as on the H₂O₂ dose applied. The humus macromolecules were degraded to smaller fragments during irradiation. At higher UV doses, however, part of the dissolved organic matter (DOM) was found to precipitate, probably as a result of polymerization. Oxalic acid, acetic acid, malonic acid, and n-butanoic acid were the most abundant degradation products detected. These acids were found to account for up to 20% and 80% of the DOM in UV- and UV/H₂O₂-treated waters, respectively. No mutagenic activity was generated by the UV irradiation or the UV/H₂O₂ treatment. It is further concluded that the substantial mutagenic activity formed during chlorination of humic waters cannot be decreased by using UV irradiation as a pretreatment step.     

Association of benzo(a)pyrene with dissolved organic matter: Prediction of Kdom from structural and chemical properties of the organic matter

The affinity of dissolved organic matter (DOM) for binding a polycyclic aromatic hydrocarbon, benzo(a)pyrene (BaP), was measured for 11 surface and ground waters and a commercial humic acid. The hydrophobic-acid (HbA) and hydrophobic-neutral (HbN) compositions of the DOM, solution absorptivity at 270nm (ABS₂₇₀), and DOM molar volumes were determined. Waters enriched in HbA material had a larger molar volume and higher aromatic content (as indicated by the ABS₂₇₀). There was a good correlation between the size and HbA content of the DOM from the different sources and the K_dom for binding BaP. An excellent predictive relationship (r² = 0.9) was demonstrated between the ABS₂₇₀ of a water and the K_dom for binding BaP. Based on these results, it is suggested that binding of BaP to DOM depends not only on the hydrophobicity of DOM, but also on the existence of an open structure within the DOM to provide access of the aqueous solute to hydrophobic domains within the DOM.     

Photocatalytic degradation of phenol by visible light-responsive iron-doped TiO2 and spontaneous sedimentation of the TiO2 particles

Fe-doped TiO₂ was prepared by the calcination of Fe_xTiS₂ (x = 0, 0.002, 0.005, 0.008, 0.01) and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV–visible diffuse reflectance spectra. All the Fe-doped TiO₂ were composed of an anatase crystal form and showed red shifts to a longer wavelength. The activity of the Fe-doped TiO₂ for the degradation of phenol was investigated by varying the iron content during UV (365 nm) and visible light (405 nm and 436 nm) irradiation. The degradation rate depended on the Fe content and the Fe-doped TiO₂ was responsive to the visible light as well as the elevated activity toward UV light. The molar ratio of 0.005 was the optimum for both the UV and visible light irradiations. The result was discussed on the basis of the balance of the excited electron–hole trap by the doped Fe³⁺ and their charge recombination on the doped Fe³⁺ level. The Fe-doped TiO₂ (x = 0.005) was more active than P25 TiO₂ under solar light irradiation. The suspended Fe-doped TiO₂ spontaneously precipitated once the stirring of the reaction mixture was terminated.     

Behavior and prediction of photochemical degradation of chlorinated polycyclic aromatic hydrocarbons in cyclohexane

The photochemical degradation of 11 chlorinated polycyclic aromatic hydrocarbons (ClPAHs) and the corresponding 5 parent PAHs was examined to simulate the compound’s fate on aerosol surfaces. All the ClPAHs and PAHs decayed according to the first-order reaction rate kinetics. The photolysis rates of ClPAHs varied greatly according to the skeleton of PAHs; the rates of chlorophenanthrenes (ClPhes) and 1-chloropyrene were higher than those of corresponding parent PAHs, whereas chlorofluoranthenes, 7-chlorobenz[a]anthracene and 6-chlorobenzo[a]pyrene were more stable under irradiation compared to respective parent PAH. Considering the photoproducts of ClPhes detected, the oxidation could occur immediately at positions of the highest frontier electron density. Finally, the quantitative structure-property relationship models were developed for direct photolysis half-lives and average quantum yields of the ClPAHs and parent PAHs, in which the significant factors affecting photolysis were E_LUMO+1, total energy and surface area, and E_LUMO, E_LUMO − E_HOMO and total energy, respectively.     

Leaching of atrazine, metolachlor and diuron in the field in relation to their injection depth into a silt loam soil

A field experiment was conducted on a Calcaric Cambisol soil to study the consequences of the penetration depth and properties of pesticides on the risk of subsequent leaching. Three pesticides with different mobility characteristics and bromide were injected at 30 cm (where soil organic matter (OM) was 2%) and 80 cm (soil OM 0.5%) on irrigated plots without a crop. The migration of injected solutes was assessed for two years by sampling the soil solution using six porous cups installed at 50 and 150 cm depth and by relating solute contents to drainage water flux estimated by the STICS model (Simulateur mulTIdisciplinaire pour les Cultures Standard). Pesticides injected at 30 cm were strongly retained so that no metolachlor or diuron was detected at 50 and 150 cm. The ratio of atrazine peak concentration in the soil solution to concentration in the injected solution (C/C₀) was 1 × 10⁻³ and 0.2 × 10⁻³, respectively, at 50 and 150 cm. When injected at 80 cm, (C/C₀) of atrazine, metolachlor and diuron were 10 × 10⁻³, 1 × 10⁻³ and 0.3 × 10⁻³ at 150 cm, respectively; 1/(C/C₀) was correlated with K_oc values reported from databases. The ratio of drainage volume to the amount of water at field capacity in the soil layer between the injection point at 30 cm and the water sampling level (V/V₀) at 50 and 150 cm was 0.6 and 0.9, respectively, for bromide and 1.6 and 1.0 for atrazine. V/V₀ of the injected solutes at 80 cm was for bromide, atrazine, metolachlor and diuron 0.6, 0.9, 1.2 and 1.7, respectively; pesticide V/V₀ was correlated with K_oc. The retardation factor was a good indicator of migration risk, but tended to overestimate retardation of molecules with high K_oc. Atrazine desorption represented an additional leaching risk as a source of prolonged low contamination. The large variability in soil solution of bromide and pesticide concentrations in the horizontal plane was attributed to flow paths and clods in the tilled soil layer. This heterogeneity was assumed to channel water fluxes into restricted areas and thereby increase the risk of groundwater contamination. The methodology used in the field proves to provide consistent results.     

Arsenic removal from water employing heterogeneous photocatalysis with TiO2 immobilized in PET bottles

Arsenic oxidation (As(III) to As(V)) and As(V) removal from water were assessed by using TiO₂ immobilized in PET (polyethylene terephthalate) bottles in the presence of natural sunlight and iron salts. The effect of many parameters was sequentially studied: TiO₂ concentration of the coating solution, Fe(II) concentration, pH, solar irradiation time; dissolved organic carbon concentration. The final conditions (TiO₂ concentration of the coating solution: 10%; Fe(II): 7.0 mg l⁻¹; solar exposure time: 120 min) were applied to natural water samples spiked with 500 μg l⁻¹ As(III) in order to verify the influence of natural water matrix. After treatment, As(III) and total As concentrations were lower than the limit of quantitation (2 μg l⁻¹) of the voltammetric method used, showing a removal over 99%, and giving evidence that As(III) was effectively oxidized to As(V). The results obtained demonstrated that TiO₂ can be easily immobilized on a PET surface in order to perform As(III) oxidation in water and that this TiO₂ immobilization, combined with coprecipitation of arsenic on Fe(III) hydroxides(oxides) could be an efficient way for inorganic arsenic removal from groundwaters.     

Compound-specific chlorine isotope analysis of polychlorinated biphenyls isolated from Aroclor and Clophen technical mixtures

The combined electrochemical oxidation-solar-light/immobilized TiO₂ film process was conducted to degrade an azo dye, Reactive Black 5 (RB5). The toxicity was also monitored by the Vibrio fischeri light inhibition test. The electrochemical oxidation rapidly decolorized RB5 (55, 110 μM) with a supporting electrolyte of 2 g l⁻¹ NaCl at current density 277 A m⁻² and pH 4. However, TOC mineralization and A₃₁₀ removal were low. Additionally, the treated solution showed high biotoxicity. RB5 at 110 μM significantly retarded the de-colorization efficiency by using the solar-light/immobilized TiO₂ film process. The combined electrochemical oxidation-solar-light/immobilized TiO₂ process effectively increased the removal of color, A₃₁₀, and TOC. The toxicity was also significantly reduced after 3 h of solar irradiation. The results indicated that the low-cost combined process is a potential technique for rapid treatment of RB5.     

Evaluating the impacts of some environmentally relevant factors on the availability of bisphenol A with negligible-depletion SPME

The effect of some environmentally relevant factors including salinity, pH, and humic acids on the availability of bisphenol A (BPA) was evaluated by using the negligible-depletion solid-phase microextraction (nd-SPME) biomimetic method. With the variation of salinity (0–500 mM NaCl) and pH (5.0–8.5) of aqueous solutions, the partition coefficients of BPA between the nd-SPME fiber and the aqueous solution varied in the range of log D = 3.55–3.86, which indicates that the salinity and pH can influence the availability of BPA. By using Acros humic acid as model dissolved organic matter (DOM), it was also demonstrated that the environmental factors such as salinity and pH could affect the partitioning of BPA between DOM and aqueous solutions. The determined partition coefficients of BPA between dissolved organic carbon (DOC) and aqueous solutions were in the range of log D_DOC = 4.03–5.60 for Acros humic acid solutions with 1–50 mg l⁻¹ DOC. The influence of salinity and pH on log D_DOC was more significant at low concentration (0–5 mg l⁻¹) of DOC.     

Radiolysis of aqueous 4-nitrophenol solution with Al2O3 or TiO2 nanoparticles

Aqueous 4-nitrophenol solutions containing TiO₂ or Al₂O₃ nanoparticles were irradiated with electron beam. 4-nitrophenol was decomposed by the ionizing radiation process in the absence of the nanoparticles. The addition of TiO₂ or Al₂O₃ (2 g l⁻¹) before irradiation improved the removal of 4-nitrophenol, total organic carbon (TOC) but also nitrogen (TN). To identify the origin of the loss (catalysis or simply adsorption), TiO₂ or Al₂O₃ nanoparticles were added after irradiation. Experiments show that the effect of the presence of TiO₂ or Al₂O₃ during irradiation is just due to adsorption.     

Accumulation, speciation and cellular localization of copper in Sesbania drummondii

Growth, accumulation and intracellular speciation and distribution of copper (Cu) in Sesbania drummondii was studied using scanning-electron microscopy (SEM), X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). The growth of seedlings was assessed in terms of biomass accumulation. The growth of the seedling was enhanced by 73.5% at a low Cu concentration (50 mg l⁻¹) compared to the control treatment. Additionally, seedling growth was inhibited by 18% at 300 mg l⁻¹ Cu with respect to the control. Copper concentration in roots and shoots was increased with increasing Cu concentration in the growth solution. The accumulation of Cu was found to be higher in roots than in the shoots. At a concentration of 300 mg l⁻¹ Cu, the roots accumulated 27,440 mg Cu kg⁻¹ dry weight (dw) while shoots accumulated 1282 mg Cu kg⁻¹ dw. Seedlings were assessed for photosynthetic activity by measuring chlorophyll a fluorescence parameters: F_v/F_m and F_v/F₀ values. Photosynthetic integrity was not affected by any of the Cu treatments. The X-ray absorption spectroscopic (XAS) studies showed that Cu was predominantly present as Cu(II) in Sesbania tissue. In addition, from the XAS studies it was shown that the Cu exists in a mixture of different coordination states consisting of Cu bound to sugars and small organic acids with some possible precipitated copper oxide. From the EXAFS studies, the coordination of Cu was determined to have four equatorial oxygen(nitrogen) ligands at 1.96 Å and two axial oxygen ligands at 2.31 Å. Scanning-electron microscopy studies revealed the distribution of Cu within the seedlings tissues, predominantly accumulated in the cortical and vascular (xylem) regions of root tissues. In the stem, most of the Cu was found within the xylem tissue. However, the deposition of Cu within the leaf tissues was in the parenchyma. The present study demonstrates the mechanisms employed by S. drummondii for Cu uptake and its biotransformation.     

Experimental design of Fenton and photo-Fenton reactions for the treatment of cellulose bleaching effluents

Multivariate experimental design was applied to the treatment of a cellulose conventional bleaching effluent in order to evaluate the use of the Fenton reagent under solar light irradiation. The effluent was characterised by the general parameters total organic carbon (TOC), chemical oxygen demand and color, and it was analysed for chlorinated low molecular weight compounds using GC–MS. The main parameters that govern the complex reactive system: Fe(II) and H₂O₂ initial concentration, and temperature were simultaneously studied. Factorial experimental design allowed to assign the weight of each variable in the TOC removal after 15 min of reaction. Temperature had an important effect in the organic matter degradation, especially when the ratio of Fenton reagents was not properly chosen. Fenton reagent under solar irradiation proved to be highly effective for these types of wastewaters. A 90% TOC reduction was achieved in only 15 min of treatment. In addition, the GC–MS analysis showed the elimination of the chlorinated organic compounds initially detected in the studied bleaching effluents.     

Copper complexation by dissolved organic matter and uncertainty assessment of their stability constants

The interaction of Cu with dissolved organic matter (DOM, extracted from an organic forest floor) was investigated and the resulting data was evaluated in terms of their uncertainty. The speciation of Cu over ‘free’ Cu (as analysed by diffusive gradients in thin films (DGT)), dissolved Cu–DOM complexes and precipitated Cu–DOM was determined as a function of pH (3.5, 4.0 and 4.5) and Cu/C ratio. The dissolved organically bound fraction was highest at pH 4.5, but this fraction decreased with increasing Cu/C ratio, which was observed for all pH levels. In the range of Cu/C=7×10⁻⁵–2.3×10⁻² (mol/mol) the precipitated fraction was very small. The speciation of both Al and Fe was not affected by increasing Cu concentrations. From a continuous distribution model using the Scatchard approach, we calculated the optimal fit and corresponding upper and lower 95% uncertainty bounds of the overall stability constants (K_o) with the shuffled complex evolution Metropolis (SCEM) algorithm. Although the optimal equation fitted the data very well, the uncertainty of the, according to literature, most reliable approach to establish stability constants, was still large. Accordingly, the usually reported intrinsic stability constants exhibited large uncertainty ranging from logK_i=6.0–7.1 (optimal 6.7) for pH 3.5, logK_i=6.5–7.1 (optimal 6.8) for pH 4.0, and logK_i=6.4–7.2 (optimal 6.8) for pH 4.5 and showed only little effect of pH.     

Reverse quantitative structure-activity relationship for modelling the sorption of esfenvalerate to dissolved organic matter. A multivariate approach

The sorption of the pyrethroid, esfenvalerate, to the dissolved and/or dispersed fraction of eight different natural humic compounds has been investigated. The dissolved organic matters (DOMs) included in this study originate from ground water, soil pore water, and surface waters. Sorption was modelled at DOM concentration levels where equilibrium partitioning of esfenvalerate between DOM and the aqueous bulk phase prevails. The inherent characteristics of the eight different humic materials, quantified in the preceding paper by Thomsen et al. (2002, this issue (PII: S0045-6535(02)00335-1)), have been used as explanatory variables for modelling this equilibrium partitioning. Using a reverse QSAR approach based on by projection-into-latent-structure regression (PLS-R) inherent sorbent properties determining for the sorption affinity of esfenvalerate to DOM were analysed. For all humic substances a decrease in the DOM-normalised equilibrium-partitioning coefficient, K_DOM, with increasing concentration of DOM was observed. Significant variations in K_DOM values, as function of the inherent characteristics of the individual humic substances, were found at DOM concentrations of 75 and 100 ppm, respectively. The latter is a strong indication of variations in sorption mechanisms of esfenvalerate to DOM of varying inherent properties. Groupings in the principal property space quantifying DOMs may indicate that separate models are needed for quantifying the equilibrium partitioning to different classes of DOM.     

Synchronous-scan fluorescence spectra of Chlorella vulgaris solution

The characterization of the Chlorella vulgaris solution was carried out using synchronous-scan spectroscopy. The range of concentration of algae and Fe(III) in aqueous solutions were 5 × 10⁸–8 × 10⁹ cells l⁻¹ and 10–60 μM, respectively. Effective characterization method used was synchronous-scan fluorescence spectroscopy. The wavelength difference (Δλ) of 90 nm was maintained between excitation and emission wavelengths; 90 nm was found to be the best Δλ for effective characterization of Chlorella vulgaris solution with or without quencher species (e.g., Fe(III), humic acid (HA)) for the first time. The peak was observed at about EX 236.6 nm/EM 326.6 nm for synchronous-scan fluorescence spectra. The fluorescence quenching of algae in system of algae–Fe(III)–HA was studied using synchronous-scan spectroscopy for the first time. Fe(III) was clearly the effective quencher. The relationship between I₀/I (quenching efficiency) and c (concentration of Fe(III) added) was a linear correlation for the algae solution with Fe(III). Also, Aldrich humic acid was found to be an effective quencher. pH effect on synchronous-scan fluorescence intensity of algal solution with Fe(III) and/or HA was evident.     

Pharmaceuticals in STP effluents and their solar photodegradation in aquatic environment

The presence of pharmaceutical compounds in surface waters is an emerging environmental issue. Sewage treatment plants (STPs) are recognized as being the main point discharge sources of these substances to the environment. A monitoring campaign of STP effluents was carried out in four European countries (Italy, France, Greece and Sweden). More than 20 individual pharmaceuticals belonging to different therapeutic classes were found. For six selected pharmaceuticals (carbamazepine, diclofenac, clofibric acid, ofloxacin, sulfamethoxazole and propranolol) present in the STP effluents, the persistence towards abiotic photodegradation was evaluated submitting them to solar experiments at 40° N latitude during spring and summer. Based on experimentally measured quantum yields for the direct photolysis in bi-distilled water, half-life times (t_1/2) at varying seasons and latitude were predicted for each substance. In salt- and organic-free (bi-distilled) water carbamazepine and clofibric acid are characterized by calculated half-life times of the order of 100 days at the highest latitudes (50° N) in winter, whereas under the same conditions sulphamethoxazole, diclofenac, ofloxacin and propranolol undergo fast degradation with t_1/2 respectively of 2.4, 5.0, 10.6 and 16.8 days. For almost all studied compounds, except propranolol the presence of nitrate ions in aqueous solutions results in a reduction of t_1/2. When present, humic acids act as inner filters towards carbamazepine and diclofenac, and as photosensitizers towards sulphamethoxazole, clofibric acid, oflaxocin and propranolol.     

Effects of photodegradation of dissolved organic matter on the binding of benzo(a)pyrene

Dissolved organic matter (DOM) in natural waters can bind various organic pollutants, and the affinity of this binding is strongly influenced by the chemical characteristics of the DOM and water pH. This study examined the effects of photochemically induced alteration of the DOM's chemical properties and water pH on the binding of benzo(a)pyrene (BaP). Time- and pH-series of solar-simulated irradiations were performed on a natural water sample and aqueous DOM solutions prepared from aquatic and soil humic substances. The binding affinity of BaP, expressed as a partition coefficient of a compound to DOM, decreased substantially after the DOM samples were irradiated over environmentally relevant radiation doses and pH ranges. The lowering of the pH due to the photoproduction of acidic products often partly offsets the reduction of the binding affinity caused by direct photoalteration of the DOM's chemical structure. The decrease of the binding affinity, after correction for the photoinduced pH change, was positively correlated with the decrease in the molecular weight and the aromaticity of the DOM in the course of irradiation. Increasing O(2) abundance accelerated the decrease of the binding affinity as a result of enhanced DOM photodegradation. Visible light played a more important role in reducing the molecular weight and aromaticity of the DOM than in reducing the content of dissolved organic carbon (DOC) via photoremineralization while the reverse was true for UV radiation, indicating that photochemical reduction of the binding affinity may occur in natural waters at depths greater than UV radiation can reach. A decrease of the affinity of DOM for binding BaP will increase the free dissolved fraction of BaP and thus its availability and toxicity to aquatic organisms. The results from this study may have similar implications for organic pollutants other than BaP.     

Mercury conversion processes in Amazon soils evaluated by thermodesorption analysis

This paper reports on the speciation study and the Hg redox behavior in Amazon soils not influenced by gold mining and collected near Manaus, AM, Brazil. The samples were incubated by adding Hg(0) and HgCl₂ to dry soil. Solid phase Hg speciation analysis was carried out using a Hg thermodesorption technique with the aim of distinguishing elemental Hg(0) from Hg(II) binding forms. In the first case, we observed the conversion of Hg(0) to Hg(II) binding forms in the range of 28–68% and a correlation between the percent of oxidation and OM content. Samples incubated with Hg(II) showed the formation of Hg(I) and/or Hg(0) in the range of 19–69%. The lowest values corresponded to the samples with the lowest clay contents. The kinetics of conversion of Hg(0) as well as HgCl₂ were roughly fitted to the two first order reactions, a fast one and a slow one. It was not possible to evaluate differences between sampling sites and types of soils, but the mean half-life of the first order reaction obtained by the addition of Hg(II) was slower (t_1/2 = 365 d) than the one obtained by the addition of Hg(0) (t_1/2 = 148 d). Previous studies have shown the predominance of organically bound Hg in these samples. Thus, the kinetic difference between Hg oxidation and reduction in combination with the efficient retention processes by OM may explain the high background values found in Amazon soils.     

Microwave-induced combustion of volatile organic compounds in an industrial flue gas over the magnetite fixed-bed

A modified domestic microwave oven was applied to heat a magnetite (Fe₃O₄) fixed-bed for continuous decomposition of volatile organic compounds (VOCs), such as acetone, n-hexane, and dichloromethane (DCM), in a simulated flue gas which contains VOCs equivalent to 2000 ppmv as DCM. Experimental results revealed that effect of the addition of water to the inlet stream on decomposition of DCM in the overall experiment was insignificant. Bulk temperature of the Fe₃O₄ fixed-bed was also found to reach 600 °C from an initial room temperature by 6.5 min under microwave radiation, even though the inlet gas was at a high gas hourly space velocity of 5240 h⁻¹ and a high relative humidity of 75%. Moreover, the VOCs in the inlet stream could be decomposed completely over the Fe₃O₄ fixed-bed by microwave heating at a power level of 645 W at heating time of 10 min. The conversion of VOCs is stable when the Fe₃O₄ fixed-bed has been heated longer than 10 min with microwave radiation. The microwave-induced heating upon Fe₃O₄ fixed-bed processing appears to be not only an energy efficient technique for air pollutions treatment but also a promising technology for variety of VOCs in a flue gas from industrial factory being decomposed simultaneously and completely.