Arsenic speciation in human hair: a new perspective for epidemiological assessment in chronic arsenicism

The analysis for arsenic in hair is commonly used in epidemiological studies to assess exposure to this toxic element. However, poor correlation between total arsenic concentration in hair and water sources have been found in previous studies. Exclusive determination of endogenous arsenic in the hair, excluding external contamination has become an analytical challenge. Arsenic speciation in hair appears as a new possibility for analytical assessing in As-exposure studies. This study applied a relative simple method for arsenic speciation in human hair based on water extraction and HPLC-HG-ICP-MS. The concentration of arsenic species in human hair was assessed in chronically As(V)-exposed populations from two villages (Esqui?a and Illapata) of the Atacama Desert, Chile. The arsenic concentrations in drinking water are 0.075 and 1.25 mg L(-1), respectively, where As(V) represented between 92 and 99.5% of the total arsenic of the consumed waters. On average, the total arsenic concentrations in hair from individuals of Esqui?a and Illapata were 0.7 and 6.1 microg g(-1), respectively. Four arsenic species, As(III), DMA(V), MMA(V) and As(V), were detected and quantified in the hair extracts. Assuming the found species in extracts represent the species in hair, more than 98% of the total arsenic in hair corresponded to inorganic As. On average, As(III) concentrations in hair were 0.25 and 3.75 microg g(-1) in Esqui?a and Illapata, respectively; while, the As(V) average concentrations were 0.15 and 0.45 microg g(-1) in Esqui?a and Illapata, respectively. Methylated species represent less than 2% of the extracted As (DMA(V)+ MMA(V)) in both populations. As(III) in hair shows the best correlation with chronic exposure to As(V) in comparison to other species and total arsenic. In fact, concentrations of As(total), As(III) and As(V) in hair samples are correlated with the age of the exposed individuals from Illapata (R= 0.65, 0.69, 0.57, respectively) and with the time of residence in this village (R= 0.54, 0.71 and 0.58, respectively).     

In field arsenic removal from natural water by zero-valent iron assisted by solar radiation

An in situ arsenic removal method applicable to highly contaminated water is presented. The method is based in the use of steel wool, lemon juice and solar radiation. The method was evaluated using water from the Camarones River, Atacama Desert in northern Chile, in which the arsenic concentration ranges between 1000 and 1300 μg L⁻¹. Response surface method analysis was used to optimize the amount of zero-valent iron (steel wool) and the citrate concentration (lemon juice) to be used. The optimal conditions when using solar radiation to remove arsenic from natural water from the Camarones river are: 1.3 g L⁻¹ of steel wool and one drop (ca. 0.04 mL) of lemon juice. Under these conditions, removal percentages are higher than 99.5% and the final arsenic concentration is below 10 μg L⁻¹. This highly effective arsenic removal method is easy to use and inexpensive to implement.     

Bacterial response to photocatalytic degradation of 6-chlorovanillin

The oxidation of a 186 ppm 6-chlorovanillin solution was performed using impregnated TiO2 glass rings in a 1 l photochemical reactor. Fifty per cent degradation was obtained after 60 min with recirculation of the solution. Then, oxidised samples were submitted under aerobic conditions to bacterial degradation in the Pseudomonas paucimobilis (S37) and Burkholderia cepacia (PZK). Both selected aerobic bacteria degrade more efficiently the photocatalysed samples, being PZK strain better than S37. A first-order kinetic was observed in both systems photocatalytic and bacterial degradation.     

Photocatalytic degradation of cellulose bleaching effluent by supported TiO2 and ZnO

A cellulose bleaching effluent (E1) was degraded in batch conditions by photocatalysis using TiO2 and ZnO supported on glass Raschig rings. The effluent was completely decolourised and the total phenol content was reduced by 85% after 120 min treatment with both catalysts. Partial mineralization of the organic matter was confirmed by total organic carbon (TOC) reduction, approximately 50%. The residual organic matter shows a low acute toxicity as compared to the initial values and AOX values are strongly reduced after the photocatalytic oxidation. Molecular mass distribution showed that high molecular mass compounds were almost completely degraded.     

Experimental design of Fenton and photo-Fenton reactions for the treatment of cellulose bleaching effluents

Multivariate experimental design was applied to the treatment of a cellulose conventional bleaching effluent in order to evaluate the use of the Fenton reagent under solar light irradiation. The effluent was characterised by the general parameters total organic carbon (TOC), chemical oxygen demand and color, and it was analysed for chlorinated low molecular weight compounds using GC–MS. The main parameters that govern the complex reactive system: Fe(II) and H₂O₂ initial concentration, and temperature were simultaneously studied. Factorial experimental design allowed to assign the weight of each variable in the TOC removal after 15 min of reaction. Temperature had an important effect in the organic matter degradation, especially when the ratio of Fenton reagents was not properly chosen. Fenton reagent under solar irradiation proved to be highly effective for these types of wastewaters. A 90% TOC reduction was achieved in only 15 min of treatment. In addition, the GC–MS analysis showed the elimination of the chlorinated organic compounds initially detected in the studied bleaching effluents.     

Advanced oxidation of a pulp mill bleaching wastewater.

The degradation, by several advanced oxidation reactions, of a pulp mill ECF bleaching effluent, was studied. The initial biodegradability of the organic matter present in the effluent, estimated as the BOD5/COD, was low (0.3). When the effluent was submitted to ozonation and to five different advanced oxidation systems (O3/UV, O3/UV/ZnO, O3/UV/TiO2, O2/UV/ZnO, O2/UV/TiO2), the biodegradability increase significantly. After five minutes of reaction, the O3/UV system appears as the most efficient in to transform the organic matter to more biodegradable forms. A similar effect was observed when the effluent was submitted to an activated sludge treatment. The COD, TOC and toxicity reduction correlated well with the biodegradability enhancement after AOPs treatments.     

Conducting polymers/zinc oxide-based photocatalysts for environmental remediation: a review

The accessibility to clean water is essential for humans, yet nearly 250 million people die yearly due to contamination by cholera, dysentery, arsenicosis, hepatitis A, polio, typhoid fever, schistosomiasis, malaria, and lead poisoning, according to the World Health Organization. Therefore, advanced materials and techniques are needed to remove contaminants. Here, we review nanohybrids combining conducting polymers and zinc oxide for the photocatalytic purification of waters, with focus on in situ polymerization, template synthesis, sol–gel method, and mixing of semiconductors. Advantages include less corrosion of zinc oxide, less charge recombination and more visible light absorption, up to 53%.