城市生活垃圾并流竖炉焚烧模拟实验研究

气化熔融焚烧技术能够避免重金属和二恶英的二次污染，被公认为实现零排放和环境友好型的焚烧方法。在这样的背景下提出了生活垃圾并流竖炉气化熔融焚烧工艺。该工艺以竖炉为气化熔融主体设备，垃圾料层与助燃空气在炉内都是至上而下并流流动，从而使垃圾热解气化产生的可燃气体在竖炉下部完全燃烧，以提供灰渣熔融耗热。并流竖炉热态模拟试验表明，并流时垃圾料层中各点的温度明显高于逆流情况，并流时产生的CO₂量明显高于逆流情况。因此说并流竖炉更适合气化熔融焚烧工艺的要求。     

采用循环流化床技术焚烧城市生活垃圾

根据目前我国城市生活垃圾热值偏低的实际情况 ,提出以煤为辅助燃料 ,采用循环流化床焚烧技术处理生活垃圾 ,可大幅度降低运行成本 ,符合国情。阐述了循环流化床焚烧技术在降低NOx、SO2 和二噁等方面的优越性。尾气处理建议采用喷活性碳 +布袋除尘组合工艺 ,飞灰处理建议采用高温熔融处理     

采用循环流化床技术焚烧城市生活垃圾

根据目前我国城市生活垃圾热值偏低的实际情况，提出以煤为辅助燃料，采用循环流化床焚烧技术处理生活垃圾，可大幅度降低运行成本，符合国情。阐述了循环流化床焚烧技术在降低NOx、SO2和二噁英等方面的优越性。尾气处理建议采用喷活性碳 布袋除尘组合工艺，飞灰处理建议采用高温熔融处理。     

危险废物回转式流化冷渣多段焚烧系统焚烧特性研究

危险废物的处理和处置是摆在我国各级市政府面前的紧迫任务。然而我国已经运行的危险废物焚烧装置普遍存在回转窑挂壁结渣、热灼减率偏高和污染排放超标等问题,作者通过将回转窑和流化床特点相结合的方法提出了一种新型危险废物回转式流化冷渣多段焚烧处置装置。该装置采用回转窑(一燃室)、二燃室和流化床结合的热解-流化焚烧工艺,特别是采用控制窑头温度避免了回转窑挂壁结渣;采用流化冷渣装置延长未燃烬渣的焚烧时间,解决了热灼减率偏高问题;水冷式烟气急冷装置可以将烟气温度从1 100℃降到200℃,防止了二恶英的尾部低温再生成。该系统运行稳定可靠,可以处理医疗垃圾和大多数的固态和液态危险废物,实现了烟气污染物尤其是二恶英排放达到国家标准的目标。同时对该系统运行时窑头温度分布、二燃室炉膛出口氧量变化、回转窑和炉膛升温特性、燃烧室外壁温度分布等几方面运行数据都进行了详细的介绍,为危险废物焚烧炉的运行提供了宝贵的经验数据。     

湿解焚烧综合处理垃圾技术的原理及应用

详细介绍了湿解焚烧处理生活垃圾技术的原理和其在武汉经济技术开发区的具体应用,并简述了其在一段时间的调试和运行后表现出的优点.为国内未来垃圾气化熔融焚烧技术的推广提供了参考.     

湿解焚烧综合处理垃圾技术的原理及应用

详细介绍了湿解焚烧处理生活垃圾技术的原理和其在武汉经济技术开发区的具体应用，并简述了其在一段时间的调试和运行后表现出的优点。为国内未来垃圾气化熔融焚烧技术的推广提供了参考。     

高热值城市生活垃圾归类分流处置的能值分析

生活垃圾处理已成为限制城市化进程和城市经济发展的重大问题之一,采用垃圾归类分流处置方法可以有效地促进垃圾减量化和资源化的效果。以西安市典型高校校园生活垃圾为代表性高热值焚烧型城市生活垃圾,通过绘制能值系统图辨析卫生填埋-沼气发电、焚烧发电、生物质燃料混烧发电等3种垃圾处理系统的能值投入和产出过程。依据垃圾物理组成和热值数据分别计算了2种处理系统的能值产出率、环境负载率、能值投资率、可更新能源投入率和能值可持续指数等5项基本能值指标,并从能量利用的角度对3种生活垃圾处理方法的环境可持续性与经济竞争力进行了比较分析。能值分析结果表明,采用生活垃圾焚烧和生物质燃料混烧发电处理法在能量转化效率和环境影响方面具有显著优势,对高热值焚烧型生活垃圾采用"归类分流-集中焚烧处理"的方式有利于提高城市生活垃圾减量化处理的环境效益与经济收益。     

不同城市生活垃圾焚烧技术的综合评价

通过工程的经济性分析、工艺过程的能流分析以及工程的环境影响分析,综合分析了流化床、炉排炉、气化熔融和等离子体气化等不同城市生活垃圾焚烧技术。结果表明:(1)在零补贴的情况下,流化床焚烧技术的工程效益最佳,但从项目投产年算起,其投资回收期也需9年;炉排炉、气化熔融与等离子体气化焚烧技术要达到流化床焚烧技术零补贴情况下的经济效益,分别需补贴约70、140、500元/t。(2)各城市生活垃圾焚烧技术下区域的水体富营养化和全球变暖影响最显著,而人体毒性影响最小。气化熔融焚烧技术和等离子体气化焚烧技术的环境影响比其他两种焚烧技术小一个数量级。(3)考虑污染物排放的环境效益,在现行中国排放标准下,流化床、炉排炉与气化熔融焚烧技术的工程效益都将得到较大提升。随着排放标准的更加严格,流化床焚烧技术的年收益率下降最显著;气化熔融焚烧技术的工程效益相较最优。     

基于集装化外运与综合型处理的上海城市生活垃圾管理对策

分析了上海市区生活垃圾收运处理现状与问题,借鉴国外特大城市生活垃圾收运处理管理经验和教训,提出了将现有垃圾水运系统升级改造为集装化水陆联运系统、将现有老港废弃物处置场扩建为生活垃圾分类、生化处理、焚烧发电、填埋等多种技术有机组合的综合型处理基地的方案,为改善上海市生活垃圾收运与处理处置系统提出可行的对策建议.     

垃圾焚烧飞灰浸出特性及固化试验的研究

垃圾焚烧飞灰残留有重金属元素和二恶英等物质而被认为是危险废物,必须对之进行稳定化处理.通过试验研究分析了国内首家自主开发成功的广东省东莞市某回转窑垃圾焚烧发电厂垃圾焚烧飞灰的化学成分及矿物组成,研究了飞灰的浸出毒性,考察了水泥固化焚烧飞灰的效果,并与熔融/玻璃固化进行了比较.研究表明,该焚烧飞灰中重金属Cd的浸出毒性严重超标,并且随pH值的减小而增大,水泥固化效果随龄期的增大而更加显著.熔融/玻璃固化的效果优于水泥固化,但其经济性有待提高.     

PCDD/PCDF reduction by the co-combustion process

A novel process, termed the co-combustion process, has been developed and designed to utilise the thermal treatment of municipal solid waste (MSW) in cement clinker production and reduce PCDD/PCDF emissions. To test the conceptual design; detailed engineering design of the process and equipment was performed and a pilot plant was constructed to treat up to 40 tonnes MSW per day. The novel process features included several units external to the main traditional cement rotary kiln: an external calcinations unit in which the hot gas calcined the limestone thus making significant energy savings for this chemical reaction; the lime generated was used in a second chamber to act as a giant acid gas scrubber to remove SOx and particularly HCl (a source of chloride); an external rotary kiln and secondary combustion unit capable of producing a hot gas at 1200 degrees C; a gas cooler to simulate a boiler turbogenerator set for electricity generation; the incorporation of some of the bottom ash, calcined lime and dust collector solids into the cement clinker. A PCDD/PCDF inventory has been completed for the entire process and measured PCDD/PCDF emissions were 0.001 ng I-TEQ/Nm(3) on average which is 1% of the best practical means [Hong Kong Environmental Protection Department, 2001. A guidance note on the best practicable means for incinerators (municipal waste incineration), BPM12/1] MSW incineration emission limit values.     

回转窑在医废焚烧工程应用中的参数优化

以规模3 t/h的某医疗废物焚烧生产线为依托,优化分析了回转窑焚烧装置核心控制参数(窑头温度、供风量及窑转速),考察了不同负荷、回转窑转动模式及进料方式对焚烧效果的影响,结果表明:窑头温度升高,有利于提高焚烧效果,是影响焚烧效果最重要的工艺参数;75%负荷时最佳工况是窑头温度850℃、窑转速0.09 r/min、供风量7 000 Nm3/h;连续反转的回转窑转动模式和恒流量的连续进料技术,有助于保持良好焚烧工况,炉渣热灼减率分别达到2.6%和2.3%。     

A Comparison of In situ Vitrification and Rotary Kiln Incineration for Soils Treatment

In the hazardous waste community, the term “thermal destruction” is a catchallphrase that broadly refers to high temperature destruction of hazardous contaminants. Included in the thermal destruction category are treatment technologies such as rotary kiln incineration, fiuidized bed incineration, infrared thermal treatment, wet air oxidation, pyrolytic incineration, and vitrification. Among them, conventional rotary kiln incineration, a disposal method for many years, is the most well established, and often serves as a barometer to gauge the relative success of similar technologies. Public sentiment on environmental issues and increasingly stringent environmental regulations has, over time, spurred design and development of innovative thermal treatment processes directed toward reducing harmful emissions and residuals that may require further treatment or disposal. In situ vitrification (ISV), a technology that combines heat and immobiliztion, is one such innovative and relatively new technology.

This paper presents a comparison of ISV and rotary kiln incineration for soils treatment in the areas of process performance, process residuals, process limitations, applicable or relevant and appropriate (ARAJRs) regulations, criteria and limitations, and costs.     

A comparison of in situ vitrification and rotary kiln incineration for soils treatment.

In the hazardous waste community, the term "thermal destruction" is a catchall phrase that broadly refers to high temperature destruction of hazardous contaminants. Included in the thermal destruction category are treatment technologies such as rotary kiln incineration, fluidized bed incineration, infrared thermal treatment, wet air oxidation, pyrolytic incineration, and vitrification. Among them, conventional rotary kiln incineration, a disposal method for many years, is the most well established, and often serves as a barometer to gauge the relative success of similar technologies. Public sentiment on environmental issues and increasingly stringent environmental regulations has, over time, spurred design and development of innovative thermal treatment processes directed toward reducing harmful emissions and residuals that may require further treatment or disposal. In situ vitrification (ISV), a technology that combines heat and immobilization, is one such innovative and relatively new technology. This paper presents a comparison of ISV and rotary kiln incineration for soils treatment in the areas of process performance, process residuals, process limitations, applicable or relevant and appropriate (ARARs) regulations, criteria and limitations, and costs.     

Field Testing and Computer Modeling of an Oxygen Combustion System at the EPA Mobile Incinerator

The LINDE® Oxygen Combustion System has been demonstrated successfully at the EPA Denney Farm site as part of the modified EPA mobile incinerator. This paper describes the field testing results and computer modeling of the LINDE system. The oxygen system enables the EPA unit to incinerate dioxin and PCB contaminated soil at a consistent rate of 4000 lb/h—200 percent of the original maximum capacity. The pure oxygen combustion system improved the thermal efficiency of the incinerator by over 60 percent and reduced the flue gas volume dramatically. Therefore, the dust carryover problem was mitigated. The destruction and removal efficiencies of hazardous wastes exceeded EPA requirements.

The design of the proprietary burner allows the use of up to 100 percent oxygen in place of air for incineration with improvements over conventional oxy-fuel burners. As a result, the temperature distributions in the rotary kiln are uniform and NO_x emissions are low.

The oxygen combustion system, controlled by a programmable controller, provided much better response and flexibility than conventional air based systems. The system generated a stable flame and responsed well to the transient conditions of the rotary kiln. Kiln puff occurrence was virtually eliminated in the operation of the mobile incinerator.

A computer model of the incinerator was developed and used for the process design of the LINDE system. The model predicted the test results reasonably well. This model can be a useful tool in the design and operation of rotary kiln incineration systems.     

城市垃圾预处理改善焚烧特性的探讨

针对目前我国城市垃圾的高水分、低热值的特性,提出了2种改善城市垃圾焚烧特性的有效措施:生物质垃圾源分类和生物干燥.在我国建立生物质垃圾源分类体系,将生物质垃圾源头分类后,剩余垃圾的热值可以提高约50%～120%,已适合直接入炉焚烧,同时分离出来的生物质垃圾也更易于好氧堆肥或厌氧消化.另外一项技术措施是在焚烧前利用生物干燥技术,降低城市垃圾的水分含量,提高入炉垃圾的热值,这种方法主要是利用生物反应热来干燥城市生活垃圾,只需要在垃圾投入焚烧炉前增加一个预处理步骤,不必改变目前的垃圾收运体系,而且进行生物干燥后的垃圾更易于分选其中的可回收物质.     

150t/d循环流化床生活垃圾焚烧炉的工艺结构与污染排放

垃圾焚烧处理技术在我国的应用越来越广泛 ,单纯引进国外的垃圾焚烧处理技术已经无法满足我国经济发展的需要。清华大学自主开发研制的 15 0t/d循环流化床生活垃圾焚烧炉已经通过专家鉴定 ,各项焚烧污染物排放指标均达到或优于国家标准 ,总体水平居国内领先水平。本文详细介绍了该焚烧炉的系统及结构 ,并对有关控制污染物排放的技术手段进行了详细分析     

Curbing dioxin emissions from municipal solid waste incineration in China: Re-thinking about management policies and practices

As one of the countries with large amounts of dioxin releases, the control of dioxins is a major challenge for China. Municipal solid waste (MSW) incineration should be considered a high priority source of dioxin emissions because it is playing an increasingly more important role in waste management. MSW incineration in China has much higher emission rates of dioxins than in the developed countries, partially resulting from the gaps in the technologies of incineration and flue gas cleaning. Moreover, the current management policies and practices also contribute significantly to the problem. We recommend lowering dioxin emission standard, strengthening fly ash management, and improving regulation enforcement to reduce dioxin releases into the environment from MSW incineration. We also propose that alternative strategies should be considered on dioxin control and call for an expansion of economic instruments in waste management to reduce waste generation and thus the need for incineration.