深圳下坪填埋场渗滤液产生量预测研究

对垃圾填埋渗滤液产生量预测模型进行了比较，选择经验－合理式模型作为填埋场渗滤液产生量的预测模型。综合下坪垃圾填埋场不同汇水面积、降雨量和渗滤液量的现场实测数据，采用线性回归确定了模型参数，通过模型预测渗滤液产生量与现场实测渗滤液产生量的对比分析了本模型的精度和可靠性，从而为填埋场渗滤液产生量的预测及收集处理系统的设计、管理提供科学依据。     

垃圾处理厂不应成为新的污染源

垃圾填埋场在填埋垃圾以后,会产生高浓度的有机废水,即渗滤液。渗滤液的特点是成分复杂、有机物含量高,垃圾填埋以后渗滤液会连续多年持续产生。因此,为防止对环境的污染,垃圾填埋场必须对渗滤液进行处理,达标后方可排放。     

城市垃圾渗滤液场内循环处理的探讨

本文对城市垃圾渗滤液的产生量、水质特征及其影响因素进行了分析，介绍了当前国内外垃圾渗滤水场内循环处理的两大研究流派-以欧美国家为主的生物反应器填埋技术和以日本为主的循环式准好氧填埋技术。根据我国城市垃圾有机物含量高的特点，提出了适合我国国情的、将准好氧填埋技术与生物反应器填埋技术特点相结合的城市垃圾填埋场渗波液场内循环处理的设计思路。     

城市垃圾填埋场渗滤液处理工艺综述

城市垃圾对环境的影响越来越严重，垃圾填埋导致垃圾渗滤液的大量产生，渗滤液中含有大量的有机物、大量的病菌、病毒、寄生虫等以及一些有毒有害的物质，若渗滤液不加以妥善处理、肆意排放，必将对地下水、地表水构成严重威胁，因此垃圾渗滤液的有效处理就成为一个亟待解决的问题。本文对城市垃圾填埋场渗滤液的处理工艺进行了分析和探讨，介绍了国内外垃圾渗滤液处理的主要技术，包括土地处理法、生物法和物化法，并对电解法处理垃圾渗滤液进行了详细的介绍。     

城市生活垃圾填埋场甲烷气资源的产量估算及其利用

本文论述了填埋场甲烷气体的产生过程及影响因素，介绍了三种产气量估算方法及其主要特点、适用范围，并指出运用数学模型对产气量作出预测，为垃圾填埋场气体收集与处理系统的设计提供可靠的依据。同时，论述了甲烷气体的减排和综合利用措施。     

镁盐/矿化垃圾改性对污水污泥产气性能的影响

本文通过建立3个模拟填埋柱,研究考察了原生污水污泥、矿化垃圾改性污泥和镁盐改性污泥的产气性能.研究发现,矿化垃圾改性可大幅度提高污水污泥的生物气产生量.在60d内,原生污水污泥和矿化垃圾改性污泥的累计生物气产生量分别为9.7L/kg污泥和21.3L/kg污泥.而60d内镁盐改性污泥没有生物气产生,其主要原因在于污泥可生物降解性的降低,以及污泥pH的提高.对于规模较大且具备生物气资源化利用的污泥填埋场,可利用矿化垃圾改性以加速填埋气产生,提高能源利用效率.对于规模较小且无生物气收集装置的污泥填埋场则可选择镁盐进行改性,以抑制生物气的产生,降低甲烷排放量.     

准好氧填埋技术在城市垃圾处理中的应用

准好氧垃圾填埋技术在近年得到了国内外的广泛应用。其原理是将排气管与渗滤液收集管相通，利用自然通风，使外部空气因填埋场内微生物发酵产生的热量形成的热对流而通过排水管自然进入填埋场内。使填埋场内维持好氧状态，从而加快垃圾的分解，改善渗滤液水质，降低有害气体的发生量，极大的改善了填埋场周围的环境。     

介绍城市生活垃圾综合处理技术

近年来，随着各大城市的不断发展，城市居民生活垃圾产生量也随之增长，至２０００年全国年垃圾清运总量已超过１．４亿吨，并按８％的幅度增长。历年全国无序堆放的垃圾总量多达６０亿吨，占用土地５亿平方米，严重污染大气和地下水资源，更有引发气体爆炸事故的发生。为解决上述严重问题，国内外在垃圾处理上提出了许多解决方案，如垃圾经过分选后填埋、制肥、沼气发电、裂解制油、生化处理等。其中已经付诸实施的焚烧处理、卫生填埋、高温堆肥都存在着一定的不足。如卫生填埋，相对焚烧处理，投资和运行费用较低，但填埋场占地相当大，大…     

垃圾填埋场水力学特性的研究进展

本文对填埋场渗滤液产生和运移的水力学特性的研究成果进行了总结，建立在填埋垃圾均质各向同性假设基础上的渗滤液运移模型不能满足日后生物反应器填埋场渗滤液回灌系统的设计和操作运行需要，基于填埋垃圾非均质各向异性的填埋场水力学特性将是今后研究的重点。     

我国城市垃圾填埋场降解速率的分析

对北京海淀区若干典型填埋场中城市垃圾的降解速率进行了实测〔1〕,指出当前垃圾堆放场的稳定周期在 1 0年左右。通过模拟实验以及理论分析 ,指出促进降解的原因在于垃圾自身组分和若干填埋条件的差异。文章并对我国未来填埋场中垃圾的降解速率提出了预测见解。     

垃圾填埋气中微量挥发性有机物的净化技术

垃圾填埋气中存在的多种微量挥发性有机物(VOCS),既造成二次污染,影响了人类健康;又对填埋气的回收利用产生了不利影响。本文综述了几种VOCS常规净化技术的基本原理、优势及限制,介绍了几种新兴技术,并预期有效的联合工艺是净化填埋气中微量VOCs的研究方向。     

The Prospect of Municipal Waste Landfill Diversion Depends on Geographical Location

This study reports on experimentation with municipal and industrial solid waste in Brazil, on mutual inspection of municipal sanitation models in selected Spanish and Brazilian towns, and on observations of municipal solid waste (MSW) management models effective in Argentina, Great Britain, Sweden, and Germany. The diversity of management strategies inhibits technology transfer. Judging by the models inspected, Sweden and Germany appear to be best prepared for stricter European landfill diversion targets in the near future. Experimentation in Brazil has resulted in a proactive MSW management model based on divided collection, which achieves 80 percent landfill diversion. This result, surprisingly, meets and exceeds European diversion targets in a South American context. As the gap in strategy and target narrows between South America and Europe, both technology and management methods may gain intercontinental mobility and thus enhance commercial ties between the two markets in the specific branch of MSW management.     

垃圾填埋处理中微量金属元素迁移和转变特性分析

城市生活垃圾中含有多种微量金属元素,并且在填埋处理过程中会产生重金属的二次污染,是城市垃圾填埋处理中最难解决的问题。本文对垃圾中微量金属的来源、微量金属在填埋过程中的迁移和转变特性等方面进行了研究。研究认为,微量金属在填埋处理过程中除受本身特性的影响,还与垃圾的产地和组成有关。     

Energy recovery from municipal solid waste in Nigeria and its economic and environmental implications

An assessment of potential biomass resources in Nigeria for the production of methane and power generation is presented in this paper. Nigeria, as an underdeveloped and populous country, needs an uninterrupted source of energy. The country's energy problems have crippled large sectors of the economy. The percentage of people connected to the national grid is 40%. These 40% experience electricity supply failure on average 10–12 hours daily. Energy generation from municipal solid waste (MSW) is an effective MSW management strategy. Yearly waste generation has increased from 6,471 gigagrams (Gg) in 1959 to 26,600 Gg in 2015. This amount is projected to reach 36,250 Gg per year by 2030. Methane emission for 2015 was 491 Gg, and it is projected to reach 669 Gg in 2030. These values translate to 3.48 × 10⁹ kilowatt hours (kWh) of electricity for 2015, with a projected 4.74 × 10⁹ kWh by 2030. The revenue to be derived from the electricity that is generated could have been US$365.04 × 10⁶ for 2015, and it is estimated that it will reach US$473.82 × 10⁶ by 2030. It was found that methane emissions from MSW increased with time, and capturing this gas for energy production will lead to a sustainable waste management.     

A two-stage support-vector-regression optimization model for municipal solid waste management - a case study of Beijing, China

In this study, a two-stage support-vector-regression optimization model (TSOM) is developed for the planning of municipal solid waste (MSW) management in the urban districts of Beijing, China. It represents a new effort to enhance the analysis accuracy in optimizing the MSW management system through coupling the support-vector-regression (SVR) model with an interval-parameter mixed integer linear programming (IMILP). The developed TSOM can not only predict the city's future waste generation amount, but also reflect dynamic, interactive, and uncertain characteristics of the MSW management system. Four kernel functions such as linear kernel, polynomial kernel, radial basis function, and multi-layer perception kernel are chosen based on three quantitative simulation performance criteria [i.e. prediction accuracy (PA), fitting accuracy (FA) and over all accuracy (OA)]. The SVR with polynomial kernel has accurate prediction performance for MSW generation rate, with all of the three quantitative simulation performance criteria being over 96%. Two cases are considered based on different waste management policies. The results are valuable for supporting the adjustment of the existing waste-allocation patterns to raise the city's waste diversion rate, as well as the capacity planning of waste management system to satisfy the city's increasing waste treatment/disposal demands.     

A generic comparison of the airborne risks to human health from landfill and incinerator disposal of municipal solid waste

A comparison of the potential risks to human health from municipal solid waste (MSW) incineration and landfill on a generic basis is attempted. For this purpose a 'worst case' approach is adopted and a number of assumptions regarding the size and activities of each waste disposal method are made. The airborne pollutants measured for an incinerator are different from those for a landfill with or without gas collection. However, based on the available information it appears that as far as airborne pollution is concerned, landfill sites without gas collection pose a potentially higher generic risk to human health than MSW incinerators performing to Environmental Agency (UK) standards. This analysis cannot be used to replace specific evaluations for a particular incinerator or a landfill site because local conditions can have a very large impact on the magnitude of risks involved.     

Municipal solid waste management in China: Status,problems and challenges

This paper presents an examination of MSW generation and composition in China, providing an overview of the current state of MSW management, an analysis of existing problems in MSW collection, separation, recycling and disposal, and some suggestions for improving MSW systems in the future. In China, along with urbanization, population growth and industrialization, the quantity of municipal solid waste (MSW) generation has been increasing rapidly. The total MSW amount increased from 31.3 million tonnes in 1980 to 212 million tonnes in 2006, and the waste generation rate increased from 0.50 kg/capita/day in 1980 to 0.98 kg/capita/year in 2006. Currently, waste composition in China is dominated by a high organic and moisture content, since the concentration of kitchen waste in urban solid waste makes up the highest proportion (at approximately 60%) of the waste stream. The total amount of MSW collected and transported was 148 million tonnes in 2006, of which 91.4% was landfilled, 6.4% was incinerated and 2.2% was composted. The overall MSW treatment rate in China was approximately 62% in 2007. In 2007, there were 460 facilities, including 366 landfill sites, 17 composing plants, and 66 incineration plants. This paper also considers the challenges faced and opportunities for MSW management in China, and a number of recommendations are made aimed at improving the MSW management system.     

Municipal solid waste production and composition in Finland—Changes in the period 1960–2002 and prospects until 2020

Waste reduction was recognised as the main goal of waste management policy in the EU in the 1990s. Although knowledge of past waste generation is essential for effective waste reduction policy there are no comprehensive statistics on the past development of municipal solid waste (MSW) production. MSW management is currently under turmoil in many EU countries as the requirements of the EC landfill directive (1999/31/EC) are set into force. In this study, the production and composition of MSW in Finland between 1960 and 2002 is presented using historical data. The impact of population, affluence and technology on MSW production are analysed using the IPAT equation and three scenarios are constructed until year 2020. The results are compared with national future targets on MSW production. Production of MSW increased in Finland until 1990, declined to year 1997, increased to 2000 and then declined again. The share of organic and plastic waste increased over the study period while the share of paper and cardboard declined. The results suggest that so far national targets on MSW reduction have been set fairly low. Moreover, our scenarios depict a wide range of future MSW production, even though the time horizon is not longer than 15 years into the future. In order to narrow this range, continuous improvement of the statistics of MSW is essential.     

Estimation of effect of sugarcane bagasse biochar amendment in landfill soil cover on geotechnical properties and landfill gas emission

In a sanitary landfill, the final cover plays an important role in reducing the landfill gas emission to the atmosphere and in preventing the ingress of rainwater into the dumped waste. The present study investigated the suitability of sugarcane bagasse biochar as an amendment to the cover soil to improve the required landfill liner properties. The amended cover soil sugarcane bagasse (SSB) was tested for its stability and effectiveness, in terms of both geotechnical properties and methane mitigation efficiency. The effects of amending 15%, 20%, and 25% of sugarcane bagasse biochar (passing through 300 micron Indian Standard sieve) on the geotechnical properties of the SSB indicated that the SSB with 25% biochar showed the required values as per the standard with maximum dry density of 1.57 grams per cubic centimeter (g/cm³), liquid limit, plasticity index, and percentage of fines 48.5%, 16.3%, and 74.7%, respectively, and permeability of 0.9 × 10^?7. A column study that was conducted to determine the methane emission from the cover soil showed a 65.8% reduction in the methane emission compared to that of a column without SSB cover, with a cumulative methane emission of 410 milliliters (mL) at the end of 200 hours (h). On the other hand, the volume of methane emitted after 310 h from the column without cover and with the SSB cover was 1850 mL and 692 mL, respectively. The difference between these two values is found to be 22% of the total methane that the cover would have handled in its lifetime (5267 mL). Thus, there is an increase in the percentage of methane adsorption by soil cover from 15% to 22% when the soil was amended with 25% sugarcane bagasse biochar.     

我国城市生活垃圾处理的市场化对策探讨

本文通过对城市生活垃圾的产生、处理现状的分析,看到垃圾处理的严峻性和刻不容缓的态势,提出我国城市垃圾处理必须走市场化道路的对策。领先全民参与、人人动手解决垃圾污染问题,促进城市垃圾蛄量化、无害化、资源化进程。尽快稳步提高我国城市垃圾处理水平,实现我国城市处理的市场化、产业化。