Comparative adsorption of Pb(II) and Cd(II) ions on chestnut shell in aqueous system

In this study, high capacity Chestnut shell, a waste product from the chestnut sugar production industry, was successfully applied to remove Pb (II) and Cd (II) ions from aqueous solutions. Maximum adsorption capacities were found as 541.25?mg/g and 75.86?mg/g for Pb(II), and Cd(II) respectively. Several important parameters influencing the adsorption of Pb(II) and Cd(II) ions such as contact time, pH, temperature and effect of metal concentration were investigated systematically by batch experiments. Langmuir and Freundlich adsorption models were used to describe adsorption isotherms and constants. The thermodynamic parameters, such as standard free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°), of the adsorption process were calculated. The adsorbents were characterised by scanning electron microscopy. It has been observed from the experimental results that in case of both Cd (II) and Pb (II), pseudo 2nd order kinetic model. From the results, Chestnut Shell are considered as an effective, low cost and environmental friendly adsorbent for the removal of Pb (II) and Cd (II) from wastewater.     

Suitability of various chemically prepared activated carbons for the removal of copper(II) ions

Studies on the suitability of various chemically prepared activated carbons (CPACs) like straw carbon (SC), sawdust carbon (SDC), dates nut carbon (DNC) and commercial activated carbon (CAC) for the removal of copper(II) ions by adsorption from simulated wastewater have been carried out under batch mode at 30?±?1°C and the results are compared. The percentage removal of Cu(II) ions increased with a decrease in initial concentration, particle size and added electrolytes (ionic strength) and increased with an increase in contact time, dose of adsorbent and initial pH of the solution. The adsorption data were fitted with the Langmuir isotherm. The applicability of the first order kinetic equation viz. Lagergren equation was tested by correlation analysis. The adsorption process is concluded to be a spontaneous, first order reaction, occurring with increased randomness at the solid–liquid interface. Studies on the desorption of Cu²⁺-loaded activated carbons (ACs) were carried out with nitric acid (0.2–1?N). The possibility of reuse of the regenerated ACs in cycle (in cue-one after another) was tested. SC was found to be a suitable adsorbent alternative to CAC among CPACs for the removal of metal ions, in general, and Cu²⁺ ions, in particular.     

Determination of metals in printed wiring boards of waste mobile phones

Metal contents of waste mobile phones represent a major environmental risk, especially considering the adoption of inappropriate management options in developing countries including open burning and disposal into surface water bodies. In this study the metal contents of mobile phone printed wiring board (PWB) samples were assessed. Sixty-two waste mobile phones of 15 brands were collected, dismantled, and their PWB samples were analyzed for Cu, Pb, Ag and Cd. The metal concentrations in the samples varied widely between and within brands. Among these metals, Cu and Pb were found to be at very high concentrations. The range (mean?±?SD) of Cu and Pb concentrations were 94.1–532?g?kg^?1 (250?±?92.3?g?kg^?1) and 7.0–46.2?g?kg^?1 (20.1?±?8.4?g?kg^?1), respectively. All Cu and Pb concentrations exceeded toxicity threshold limit concentration (TTLC) regulatory limits used in characterizing wastes as hazardous in the state of California, USA. The mean Cu and Pb concentrations exceeded the corresponding TTLC limits by factors of 100 and 20, respectively. The Ag and Cd concentrations were in the range 59.4–759?mg?kg^?1 (mean 227?±?104?mg?kg^?1) and ND – 15.6?mg?kg^?1 (2.1?±?3.3?mg?kg^?1), respectively.     

Abstracts to forthcoming papers

Food is the major source of metal exposure for the nonsmoking general population. Food samples of plant and animal origin from Ismailia, Egypt, were analyzed for the content of cadmium (Cd), lead (Pb), chromium (Cr), zinc (Zn), and copper (Cu) using AAS. The Cr, Zn, and Cu concentrations were in the range of 1.7–249?µg?kg^?1 wet weight (ww), 2–66?mg?kg^?1?ww, and 0.5–3.46?mg?kg^?1?ww, respectively. The mean daily intake of Cr, Zn, and Cu was 28.9?µg day^?1, 8.55?mg day^?1, and 1.7?mg day^?1, respectively. The intake estimates are within the range of the recommended intake established internationally. Concentrations of Cd and Pb were in the range of 10–321?µg?kg^?1?ww and 31–1200?µg?kg^?1?ww, respectively. The weekly dietary intake for Cd and Pb (4.02 and 20.4?µg?kg^?1 b.w, respectively) is lower than the FAO/WHO PTWI. Bread is the foodstuff that provided the highest rate of Pb and Cd (62 and 46% of the daily intake) to adults in Ismailia city.     

Distributions of total metals in the surface sediments of the Bandirma and Erdek Gulfs,Marmara Sea,Turkey

The aim of this study is to determine the contents of aluminum, iron, manganese, nickel, copper, zinc, chromium, cadmium, lead, and mercury in sediments at 1–30?m depths of the Band?rma and Erdek Gulfs in the Southern Inner Shelf of the Marmara Sea. Sediment samples were collected from different depths (1?m, 5?m, 10?m, 20?m, 30?m) at each region in February 2008. Primary hydrographic conditions, such as temperature (6.6–14.5°C), salinity (22.6–26.875 psu), percentage of dissolved oxygen saturation (35–83 %), and pH (8.0–8.4) were recorded for each sampling point. Moreover the total organic carbon (0.5–2.9%) and the total calcium carbonate contents (0.8–60%) of sediment samples were determined. In surface sediments of both gulfs, Pb (21–62?mg?kg^?1) and Cd (0.52–0.86?mg?kg^?1) contents were determined to be higher than the shale average (Pb 20?mg?kg^?1, Cd 0.2?mg?kg^?1) while the other metal contents were measured to be lower in general. On the other hand, generally Hg (0.06–1.1?mg?kg^?1) contents were higher than the shale average (0.3?mg?kg^?1)at all of the examined stations in the Band?rma Gulf and lower than the shale average in the Erdek Gulf.     

Removal of Mo(VI) from aqueous solutions using sulfuric acid-modified cinder: kinetic and thermodynamic studies

Removal of Mo(VI) from aqueous solutions was investigated using cinder modified by sulfuric acid. Various parameters such as pH, agitation time, Mo(VI) concentration, and temperature have been studied. The maximum adsorption of Mo(VI) occurred at pH between 4.0 and 6.0. Kinetic studies showed that the adsorption generally obeyed a pseudo second-order model. The activation energy was 31.4?kJ?mol^?1, indicating that the adsorption process was governed mainly by interactions of physical nature. Furthermore, application of Langmuir and Freundlich isotherm models to the adsorption equilibrium data showed that the adsorption behavior obeyed the Langmuir model. The adsorption capacity was found to be 10.8?g Mo(VI)?kg^?1 adsorbent. Finally, thermodynamic parameters such as ΔH ⁰, ΔS ⁰, and ΔG ⁰ were also evaluated, which showed that the adsorption of Mo(VI) on the treated cinder was endothermic, entropy increasing, and spontaneous. In conclusion, the sulfuric acid-modified cinder was shown to be an inexpensive, effective, and simple adsorbent for the removal of Mo(VI) from water.     

Trichoderma harzianum: a green sorbent for Pb(II) uptake from aqueous solutions

This investigation describes the use of specially cultivated, nonliving biomass of Trichoderma harzianum as a biosorbent for the batch removal of Pb(II) from a stirred system under different experimental conditions. The metal removal depended upon pH, sorbent particle size, initial Pb(II) concentration, shaking speed, and sorption time. The optimal experimental conditions for the removal of Pb(II) by T. harzianum with an initial metal concentration of 100 mg L^?1 were obtained at a particle size of 53 μm, a pH of 4.5, a shaking speed of 200 rpm, and a contact time of 720 min. The results were analyzed in terms of adsorption isotherms and kinetic models. The Freundlich isotherm model and pseudo second-order model fitted well in the data. T. harzianum proved to be a good biomaterial for accumulating Pb(II) from aqueous solutions (q = 460 mg g^?1).     

Determination of the levels of selected metals in seeds,flowers and fruits of medicinal plants used for tapeworm treatment in Ethiopia

The level of accumulation of selected essential and non-essential metals, namely; Ca, Cu, Fe, Zn, Mn, Cd, Pb, and Cr have been investigated in the seeds, fruits, and flowers of some medicinal plants utilized for tapeworm treatment in Ethiopia and their respective soil samples. These include seed of Cucurbita maxima (Duba), fruit of Embelia abyssinica (Ankoko), flowers of Hagenia abyssinica (Kosso), and fruits of Rosa abyssinica (Kega) and their respective soil samples. A wet digestion procedure with a mixture of conc. HNO₃ and HClO₄ for the plant samples and a mixture of conc. HNO₃, HCl, and H₂O₂ for soil samples were used to solubilize the metals. Ca (1280–12,670?mg?kg^?1) was the predominant metal followed by Fe (104–420?mg?kg^?1), and Zn (18–185?mg?kg^?1) in all the plant materials except for Hagenia abyssinica flower from Hirna in which Mn (16–42?mg?kg^?1) followed by Fe. Among the non-essential toxic metals, Pb was not detected in Cucurbita maxima of Boji, Gedo and Hirna origins and in Rosa abyssinica of Hirna site. Similarly, Cr was not detected in Rosa abyssinica fruits of Boji and Gedo sites. The sampled soils were found to be between strongly acidic to weakly basic (pH: 4.7–7.1). In the soil samples, Ca (8528–18,900?mg?kg^?1) was the most abundant metal followed by Fe (417–912?mg?kg^?1), Zn (155–588?mg?kg^?1), Mn (54–220?mg?kg^?1), Cr (21–105. mg?kg^?1), Cu (11–58?mg?kg^?1), Pb (13–32?mg?kg^?1) and Cd (2.8–4.8?mg?kg^?1). The levels of most of the metals determined in the medicinal plants and the respective soil samples are in good agreement with those reported in the literature and the standards set for the soil by various legislative authorities.     

Metallsorption an Illit und Metallfreisetzung unter Einwirken der Aminosäuren Glycin und Histidin

The heavy metal ions Zn(II), Pb(II), Cr(III) and Hg(II) were examined in regard of their adsorption behaviour towards Kaolin W from Lohrheim (51% illite, 31% kaolinite and 18% quarz). By means of the Langmuir and Freundlich models the determined adsorption isothermes could be linearized. The ability of glycine and histidine solutions to release heavy metal ions, pre-adsorbed on Kaolin W (36,1–2300 mg kg^?1 Zn, Pb, Cr and Hg), was specified. It was found a low influence of glycine, but an evident influence of histidine to the metal release, expecially of Pb and Cr, depending on the metalcoating, metal-amino acid-ratio, experimental pH and testing period. The highest remobilisation fraction, up to 98%, could be found in the case of Zn. This elucidates an enhancement of the zinc release compared with the blank solution, without containing amino acids, to a factor of maximal 9,3. As far as Pb and Cr were concerned the histidine extraction exeeded the remobilisation in the blank solution by a maximum of 50,8 or 40. As Hg develops strong covalent bondings to illite by OH-bridges, the release of Hg was not affected by the amino acids.     

Heavy metal pollution in soil and plants at bone char site

This study determined the heavy metal concentration in soil and plants at a bone char site in Umuahia, Nigeria. Soil and plant samples collected in a randomized complete block design (RCBD) were analyzed for zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), and arsenic (As). The concentration of metals in soil and plants in the vicinity of the bone char site are as follows: Zn (172?mg?kg^?1) and Ni (0.62?mg?kg^?1) in soil were highest at site P₃, Pb (2.37?mg?kg^?1) and As (0.08?mg?kg^?1) at site P₁, and Cd (18.30?mg?kg^?1) at site P₂. In plants, the concentrations of Zn (41.17?mg?kg^?1) and Cd (3?mg?kg^?1) were highest in Albizia ferruginea, Ni in Dialium guineense (0.09?mg?kg^?1), while Pb was in D. guineense (0.08?mg?kg^?1) and Spathodea companulata (0.06?mg?kg^?1). The levels of Zn, Cd, Pb, Ni, and As in soil ranged from 11.2 to 172, 2.68 to 18.2, 0.026 to 2.37, 0.33 to 0.62, and 0.02 to 0.08?mg?kg^?1, respectively. In plants, the concentration of Zn, Cd, Pb, and Ni ranged from 2.01 to 41.17, 0.12 to 3, 0.02 to 0.08, and 0.03 to 0.09?mg?kg^?1, respectively. There were significant correlations between Zn and Cd, and Pb and As in soil. The high concentration of Cd in soil might affect soil productivity.     

Biosorption of chromium(VI), nickel(II) and copper(II) ions from aqueous solutions using Pithophora algae

The biosorption of heavy metals is considered to be one of the best alternatives for the treatment of wastewater. The metal binding capacity of algae and acid-treated algae is investigated to find out the removal characteristics of Cr(VI), Ni(II) and Cu(II) ions from single metal solutions. Batch experiments are conducted and the study is extended to investigate the effect of pH, amount of adsorbent and adsorbate concentration on the extent of biosorption. The results indicate that the adsorption capacity of algae depends strongly on pH. The maximum adsorption of Cr(VI), Ni(II) and Cu(II) occurs at pH values of 2, 7 and 4.3, respectively. The adsorption process follows first-order kinetic equation. The data obtained are correlated with Freundlich and Langmuir adsorption isotherms.     

Low-cost and efficient adsorbent derived from pyrolysis of Jatropha curcas seeds for the removal of Cu2+ from aqueous solutions

Biochar, is a low-cost material that can be used as an alternative adsorbent for the removal of heavy metals. In this study, a low-cost and efficient adsorbent synthesised from Jatropha curcas seeds was used for the uptake of Cu²⁺ from aqueous solutions. The as-prepared adsorbent was characterised by scanning electron microscopy and Brunauer–Emmett–Teller analysis post calcination at 500 °C, its BET surface area and total pore volume were 39.62?m²?g^?1 and 0.049?m³?g^?1, respectively. Subsequently, the effects of initial pH of the solution, contact time, and adsorbent material dosage on the adsorption of Cu²⁺ by the prepared adsorbent were investigated. The as-prepared adsorbent exhibited a high performance, with a maximum adsorption amount of 32.895?mg?g^?1 for Cu²⁺ at pH 5.0 and 25 °C, owing to the presence of ?OH, C=O, C–O, Si-O-Si, and O-Si-O on its surface. The predominant Cu²⁺ adsorption mechanism was assumed to be ion exchange. Notably, the Cu²⁺ adsorption could attain equilibrium within 90?min. In addition, the fact that the Langmuir model was a better fit than the Freundlich model for the isotherm data of Cu²⁺ adsorption by the as-prepared adsorbent suggested that the adsorption of Cu²⁺ was a monolayer adsorption process.     

Multivariate optimization of Cd(II) biosorption onto Ulmus tree leaves from aqueous waste

Ulmus tree leaves were successfully used as a novel and efficient biosorbent for removing cadmium, (Cd(II)), from aqueous solutions in a batch system. A multivariate strategy for optimization of removal efficiency conditions of Cd(II) was carried out. A 2³ full factorial design with three center points (9 runs) was performed for screening the main variables and reducing the large number of experimental runs. Initial concentration of metal ion (C _m), amount of sorbent (m), and pH were considered as the three main variables at two different levels. The maximum removal efficiency of Cd(II) was achieved within 1 h contact time. It was found that all the main factors and their interactions were significant at p < 0.05. Doehlert response surface methodology was utilized (13 runs) for finding a suitable mathematical model. The analysis of variance and some statistical tests such as lack-of-fit, coefficient of determination (R ²), and residual distribution plot confirmed the validity of the model. The optimum conditions for maximum removal of Cd(II) by Ulmus tree leaves were found as pH = 3.4, m (amount of sorbent) = 0.128 g, C _m (initial concentration of metal ion) = 12.1 mg L^?1.     

Essential and nonessential elements in the red-crowned crane Grus japonensis of Zhalong Wetland,northeastern China

The concentrations of four essential (Ca, Mg, Zn, and Cu) and two nonessential elements (Pb and Cd) in feathers and kidneys, livers, gut walls, and muscles of eight carcasses of migratory red-crowned cranes (Grus japonensis) from Zhalong Wetland, northeastern China, were examined. The concentrations of Cd in the feathers were between 0.4 mg kg^?1 dry weight (dw) and 3.1 mg kg^?1 dw, in the livers between 0.4 and 4.4 mg kg^?1 dw, the maximum of which exceeded a level considered to be environmental exposure risk (i.e., 3 mg kg^?1 dw in the liver or kidney). High Pb levels (0.4–3.2 mg kg^?1 dw, with an average of 1.8 mg kg^?1) were also detected in livers, which exceeded a level considered toxicosis in birds (1.7 mg kg^?1 dw). Pb and Cd had the highest scores in principal component analysis. Relatively high Pb and Cd concentrations in the migratory cranes were thought to be associated with their habitat and prey.     

Modeling of adsorption isotherms and kinetics of uranium sorption by magnetic ion imprinted polymers

Application of magnetic U(VI) ion imprinted polymers (IIPs) coated on magnetic nanoparticles was investigated for pre-concentration and determination of U(VI) ions in aqueous solutions. The scanning electron micrographs revealed the microporosity of the adsorbent. Uranium leaching was successful as the energy-dispersive X-ray spectra showed. The Brunauer–Emmett–Teller (BET) surface area improved by more than 13-fold (83.1 and 6.2 m² g^?1 for the leached and unleached magnetic IIP, respectively). U(VI) uptake was optimized using batch experiments with parameters affecting the uptake performance, such as initial uranium concentration, pH, contact time, and adsorbent dose investigated. Pseudo-second-order kinetics and the Langmuir isotherm model best fitted the experimental data. The maximum adsorption capacity of uranium onto the activated magnetic IIP reached 5.4 mg g^?1. The selectivity order was determined to be U(VI) > Ni(II) > Th(IV).     

Ecotoxicological risks of the abandoned F–Ba–Pb–Zn mining area of Osor (Spain)

Due to its potential toxic properties, metal mobilization is of major concern in areas surrounding Pb–Zn mines. In the present study, metal contents and toxicity of soils, aqueous extracts from soils and mine drainage waters from an abandoned F–Ba–Pb–Zn mining area in Osor (Girona, NE Spain) were evaluated through chemical extractions and ecotoxicity bioassays. Toxicity assessment in the terrestrial compartment included lethal and sublethal endpoints on earthworms Eisenia fetida, arthropods Folsomia candida and several plant species, whereas aquatic tests involved bacteria Vibrio fischeri, microalgae Raphidocelis subcapitata and crustaceans Daphnia magna. Total concentrations of Ba (250–5110 mg kg^?1), Pb (940 to >5000 mg kg^?1) and Zn (2370–11,300 mg kg^?1) in soils exceeded intervention values to protect human health. Risks for the aquatic compartment were identified in the release of drainage waters and in the potential leaching and runoff of metals from contaminated soils, with Cd (1.98–9.15 µg L^?1), Pb (2.11–326 µg L^?1) and Zn (280–2900 µg L^?1) concentrations in filtered water samples surpassing US EPA Water Quality Criteria (2016a, b). Terrestrial ecotoxicity tests were in accordance with metal quantifications and identified the most polluted soil as the most toxic. Avoidance and reproduction tests with earthworms showed the highest sensitivity to metal contamination. Aquatic bioassays performed in aqueous extracts from soils confirmed the results from terrestrial tests and also detected toxic effects caused by the mine drainage waters. Algal growth inhibition was the most sensitive aquatic endpoint. In view of the results, the application of a containment or remediative procedure in the area is encouraged.     

The potential ecological risk of soil trace metals following over five decades of agronomical practices in a semi-arid environment

The concentration and potential ecological risk of Mn, Zn, Cu, and Cd in the surface soils (0–30?cm) belonging to 12 soil profiles and 4 soil types (Vertisols, Chernozems, Calcisols, and Cambisols) from the cultivated soils and the corresponding uncultivated soils were investigated. Long-term cultivation caused a considerable build-up diethylene-triamine pentaacetic acid (DTPA)-extractable Mn (7–55%), and Cd (12–31%) as well as the total form of Zn (3–14%), Cu (8–25%), and Cd (33–78%) in all soil types. Following long-time cropping, total Zn (mean?=?73?mg?kg^?1), Cu (mean?=?33?mg?kg^?1), and Cd (mean?=?3.14?mg?kg^?1) and DTPA Zn (mean?=?1.2?mg?kg^?1) and Cu (mean?=?2.44?mg?kg^?1) were below their maximum allowable limits. However, the average amount of DTPA Cd in the tilled soils (min?=?0.4, max?=?0.75, mean?=?0.55?mg?kg^?1) was above its maximum permissible limit mainly due to the over application of phosphate fertilisers and the pesticides. Considering the potential ecological risk (RI) assessment of the cultivated soils (min?=?44, max?=?70, mean?=?54), the soil types were categorised as low (RI?≤?50) to moderate (50?相似文献   

Heavy metals uptake from aqueous solutions using marine algae (Colpomenia sinuosa): kinetics and isotherms

The adsorption of copper, zinc, cobalt, lead and cadmium ions onto Colpomenia sinuosa was studied as a function of contact time, initial metal ion concentration and initial pH. In addition, desorption studies were performed. Characterisation of this adsorbent was also confirmed by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) analysis. Batch adsorption experimental data were analysed using Langmuir, Freundlich and Dubinin–Raduschkevich (D–R) adsorption isotherms. The results indicated that the biosorption equilibrium was well described by both the Freudlich and D–R isotherms. Moreover, sorption kinetics was performed and it was observed that equilibrium was reached in<60 min, which could be described by the pseudo-second-order kinetic model for all heavy metals. The sorption of heavy metals onto the biomass was largely dependent on the initial solution pH. The elution efficiency for heavy metal ions desorption from C. sinuosa was determined for 0.1 M HCl, 1.0 M HCl and 1.0 M HNO₃. Desorption efficiency and also adsorption capacity were highest for Pb(II). The results indicate that C. sinuosa has great potential for the removal of heavy metals in an ecofriendly process.