The removal of arsenic from water with natural and modified clinoptilolite

The presence of increased arsenic concentrations in Eastern Croatia is a consequence of the geological composition of the soil. Because of its known harmful effects, arsenic removal is of high importance and adsorption represents an attractive and economically efficient approach to arsenic removal. The use of zeolites obtained from the Donje Jesenje deposit, Croatia (CZ) and the Zlatokop deposit in Vranjska Banja, Serbia (SZ) in Na- and Fe–Na-modified forms was investigated in order to effectively remove arsenate and arsenite from aqueous solutions. The adsorption kinetics of arsenic was studied as a function of the initial arsenate and arsenite concentrations (30–300 μg · L^?1), equilibration time (3–48 h), pH (5–10) and in the presence of sulfate and phosphate at initial concentrations of 0.2–0.5 mg · L^?1. In order to estimate sorption constants designating the sorption capacity and affinity of the zeolites samples, the experimental results were fitted to the Langmuir and Freundlich sorption isotherms. Desorption tests conducted with 1–3 mol · L^?1 HCl indicated that arsenate sorption was irreversible. The results obtained indicated that use of the Serbian zeolite in the Fe–Na-modified form (Fe–Na-SZ) was favourable for arsenate removal from water containing up to 30 μg As · L^?1.     

Biodegradation of carbofuran in sequencing batch reactor augmented with immobilised Burkholderia cepacia PCL3 on corncob

The performance of sequencing batch reactors (SBRs) augmented with immobilised Burkholderia cepacia PCL3 on corncob for biodegradation of carbofuran in basal salt medium (BSM) was studied. A 2.0-L SBR with a working volume of 1.5 L was operated for a total cycle of 48 h, consisting of 1.0 h fill phase, 46 h react phase and 1.0 h decant phase. The initial pH of the feed medium was 7.0. Air was fed into the reactor at a controlled flow rate of 600 mL·min ^?1. The effect of hydraulic retention time (HRT) (14 to 6 days) on carbofuran-degradation efficiency was investigated at a carbofuran concentration in the feed medium of 20 mg·L ^?1. The shortest HRT resulting in complete degradation of carbofuran was 8 days. At 75% of the optimum HRT (6 days), the effects of biostimulation using organic amendments, i.e. molasses, cassava pulp, rice bran and spent yeast, and the effect of carbofuran concentration in the feed medium (20–80 mg·L ^?1) were investigated. The optimum conditions for SBRs were an initial carbofuran concentration of 40 mg·L ^?1 and 0.1 g·L ^?1 of rice bran as a biostimulated amendment. Complete degradation of carbofuran with a first-order kinetic constant (k ₁) of 0.044 h^?1 was achieved under these optimum conditions.     

Effect of waterborne boron and molybdenum on survival,growth and feed intake of Indian major carp,Cirrhinus mrigala (Hamilton)

The effect of either boron (B) or molybdenum (Mo) on survival, growth and feed intake of Indian major carp, Cirrhinus mrigala (Hamilton), advanced fry was studied in two separate experiments. Survival rates of C. mrigala fry (2.78±0.14 g) following 50 days’ exposure to B at 0.01 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 were 100% at all concentrations except 8.0 mg·L ^?1 where the survival rate 87.5±7.5%. We observed 100% survival of mrigala fry at all concentrations of Mo, 0.02 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1. Both B and Mo at 0.5 mg·L ^?1 showed significantly (p<0.05) higher growth of the fish compared with control and other concentrations. B exposure at 1.0, 2.0 and 4.0 mg·L ^?1 had no significant effect on growth rate, whereas at 8.0 mg B·L ^?1 growth of the fish almost ceased. Mo exposure at 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 caused no significant effect on growth rate of the fish compared to control. Both B and Mo at all concentrations had no significant effect on feed intake of the fish compared with control, except at the highest concentration of boron (8.0 mg·L ^?1).     

Dynamic changes in radial oxygen loss and iron plaque formation and their effects on Cd and As accumulation in rice (Oryza sativa L.)

Temporal variations and correlations between radial oxygen loss (ROL), iron (Fe) plaque formation, cadmium (Cd) and arsenic (As) accumulation were investigated in two rice cultivars at four different growth stages based upon soil pot and deoxygenated solution experiments. The results showed that there were significant differences in ROL (1.1–16 μmol O₂ plant^?1 h^?1), Fe plaque formation (4,097–36,056 mg kg^?1), Cd and As in root tissues (Cd 77–162 mg kg^?1; As 49–199 mg kg^?1) and Fe plaque (Cd 0.4–24 mg kg^?1; As 185–1,396 mg kg^?1) between these growth stages. ROL and Fe plaque increased dramatically from tillering to ear emergence stages and then were much reduced at the grain-filling stage. Furthermore, significantly positive correlations were detected between ROL and concentrations of Fe, Cd and As in Fe plaque. Our study indicates that increased Fe plaque forms on rice roots at the ear emergence stage due to the increased ROL. This stage could therefore be an important period to limit the transfer and distribution of Cd and As in rice plants when growing in soils contaminated with these toxic elements.     

Pomegranate husk as an adsorbent in the removal of toxic chromium from wastewater

The use of a new sorbent developed from the husk of pomegranate, a famous fruit in Egypt, for the removal of toxic chromium from aqueous solution has been investigated. The batch experiment was conducted to determine the adsorption capacity of the pomegranate husk. The effects of initial metal concentration (25 and 50 mg l^?1), pH, contact time, and sorbent concentration (2–6 g l^?1) have been studied at room temperature. A strong dependence of the adsorption capacity on pH was observed, the capacity increased as the pH decreased, and the optimum pH value was pH 1.0. Adsorption equilibrium and kinetics were studied with different sorbent and metal concentrations. The adsorption process was fast, and equilibrium was reached within 3 h. The maximum removal was 100% for 25 mg l^?1 of Cr⁶⁺ concentration on 5 g l^?1 pomegranate husk concentration, and the maximum adsorption capacity was 10.59 mg g^?1. The kinetic data were analysed using various kinetic models—pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion equations—and the equilibrium data were tested using several isotherm models, Langmuir, Freundlich, Tempkin, Dubinin–Radushkevich, and Generalized isotherm equations. The Elovich and pseudo-second-order equations provided the greatest accuracy for the kinetic data, while Langmuir and Generalized isotherm models were the closest fit for the equilibrium data. The activation energy of sorption has also been evaluated as 0.236 and 0.707 kJ mol^?1 for 25 and 50 mg l^?1 chromium concentration, respectively.     

Heavy metals in the polychaete Glycera longipinnis from the southwest of India

Metal concentrations in sediment and in whole tissue of the benthic polychaete Glycera longipinnis collected along the southwest coast of India were analysed. Relative seasonal accumulation of metals (Cu, Pb, Cr, Ni, Zn, Cd, Hg) was studied by categorising the habitat as less polluted or highly polluted based on metal contamination routed through industrial and urban sources. The metal content in tissues varied seasonally in the ranges, Cu: 2.21–27.08 μg·g^?1, Pb: 0.06–4.92 μg·g^?1, Cr: 1.73–29.20 μg·g^?1, Ni: 1.60–4.61 μg·g^?1, Zn: 14.72–82.30 μg·g^?1, Cd: 0.04–1.38 μg·g^?1and Hg: below decetable limits to 0.86 μg·g^?1. Concentration of heavy metals was found to be high in the whole body of G. longipinnis pooled from the polluted transects. The results of this study suggest that G. longipinnis may act as a useful biological indicator for heavy metal pollution along the southwest coast of India.     

Assessment of heavy metals in a soil contaminated by oil spill: a case study in Nigeria

Surface and subsurface soil samples contaminated with crude oils were collected from an impacted site at Bodo City in the Niger Delta, Nigeria, after a field reconnaissance survey. An uncontaminated soil sample collected 100 m from the impacted site, but within the same geographical area, was used as a control. Trace elements such as, As, Cu, Cr, Cd, Fe, Pb, Ba, Ni, V, Hg and cation-exchange capacity constituents of the contaminated and uncontaminated soils were determined by atomic absorption spectroscopy. Trace element concentrations were: Cu, 0.5–13.4 mg kg^{? 1}; Cr, 0.2–0.8 mg kg^{? 1}; Fe, 6.2–8.7 mg kg^{? 1}; Ba 80.0–108.0 mg kg^{? 1}; Ni, 0.6–4.8 mg kg^{? 1}; and V, 4.0–9.4 mg kg^{? 1}; cation-exchange capacity ranged from 43.6 to 57.2 mg kg^{? 1} in surface and subsurface soils. Results showed that eigenvalues for the two first principal components represent up to 49% of the total variance. A positive correlation of the first principal component with Cu, Cr and cation-exchange capacity shows pollution from oil spillage, while a positive correlation of the second principal component with Cr, Fe, V, and dissolved oxygen (DO) shows both oil pollution and allochthonous inputs.     

Photoelectrochemical treatment of ammonium using seawater as a natural supporting electrolyte

In the present study, a photoelectrochemical process containing seawater as a natural low-cost supporting electrolyte was used to remove ammonium from wastewater in a continuous flow mode. Based on central composite design (CCD), response surface methodology (RSM) was employed to evaluate the performance of the process in ammonia removal. The effect of four main independent parameters, including initial ammonium concentration, hydraulic retention time (HRT), current intensity and initial pH on the removal of ammonia was evaluated by the model. The optimal initial ammonium concentration, HRT, current intensity and initial pH were 917 mg NH ₄? N;·L ^?1, 108 min, 1.8 A and 8.4, respectively. The high coefficients (R ²=0.97 and adjusted R ²=0.94) obtained by the analysis of variance (ANOVA) demonstrated close correlation between predicted and experimental values. Also, treating the reject water from the sludge dewatering unit as an ammonium-rich wastewater showed the effectiveness of the process for treating real wastewaters (86% ammonium removal). The results revealed that the present process can be an efficient method for ammonium removal from polluted effluents in coastal areas based on the availability of seawater as a cost-efficient supporting electrolyte.     

Spatial distribution of copper in relation to recreational boating in a California shallow-water basin

The overall effect of the number of boats on the copper (Cu) levels in the water column and sediment, along with their spatial variability within Shelter Island Yacht Basin (SIYB), San Diego Bay, California was examined. We identified a horizontal gradient of increasing dissolved Cu and Cu in sediment from outside to the head of SIYB which was coincident with the increasing number of boats. Spatial models of Cu distribution in water and sediment indicated the presence of ‘hotspots’ of Cu concentration. From outside to the head of SIYB, dissolved Cu ranged from 1.3 μ g L^?1 to 14.6 μ g L^?1 in surface water, and 2.0 μ g L^?1 to 10.2 μ g L^?1 in bottom water. Cu in sediment exceeded the Effect Range Low of 34 mg kg^?1 (i.e. where adverse effects to fauna may occur), with a peak concentration of 442 mg kg^?1 at the head of the basin. Free Cu⁺⁺ in surface water was several orders of magnitude higher than in sediment porewater. High-resolution data of Cu species together with probability maps presented in this paper will allow managers to easily visualise and localise areas of impaired quality and to prioritise which areas should be targeted to improve Cu-related conditions.     

Arsenic contamination of natural waters in San Juan and La Pampa, Argentina

Arsenic (As) speciation in surface and groundwater from two provinces in Argentina (San Juan and La Pampa) was investigated using solid phase extraction (SPE) cartridge methodology with comparison to total arsenic concentrations. A third province, Río Negro, was used as a control to the study. Strong cation exchange (SCX) and strong anion exchange (SAX) cartridges were utilised in series for the separation and preservation of arsenite (As^III), arsenate (As^V), monomethylarsonic acid (MA^V) and dimethylarsinic acid (DMA^V). Samples were collected from a range of water outlets (rivers/streams, wells, untreated domestic taps, well water treatment works) to assess the relationship between total arsenic and arsenic species, water type and water parameters (pH, conductivity and total dissolved solids, TDS). Analysis of the waters for arsenic (total and species) was performed by inductively coupled plasma mass spectrometry (ICP-MS) in collision cell mode. Total arsenic concentrations in the surface and groundwater from Encon and the San José de Jáchal region of San Juan (north-west Argentina within the Cuyo region) ranged from 9 to 357 μg l^?1 As. Groundwater from Eduardo Castex (EC) and Ingeniero Luiggi (LU) in La Pampa (central Argentina within the Chaco-Pampean Plain) ranged from 3 to 1326 μg l^?1 As. The pH range for the provinces of San Juan (7.2–9.7) and La Pampa (7.0–9.9) are in agreement with other published literature. The highest total arsenic concentrations were found in La Pampa well waters (both rural farms and pre-treated urban sources), particularly where there was high pH (typically > 8.2), conductivity (>2,600 μS cm^?1) and TDS (>1,400 mg l^?1). Reverse osmosis (RO) treatment of well waters in La Pampa for domestic drinking water in EC and LU significantly reduced total arsenic concentrations from a range of 216–224 μg l^?1 As to 0.3–0.8 μg l^?1 As. Arsenic species for both provinces were predominantly As^III and As^V. As^III and As^V concentrations in San Juan ranged from 4–138 μg l^?1 to <0.02–22 μg l^?1 for surface waters (in the San José de Jáchal region) and 23–346 μg l^?1 and 0.04–76 μg l^?1 for groundwater, respectively. This translates to a relative As^III abundance of 69–100% of the total arsenic in surface waters and 32–100% in groundwater. This is unexpected because it is typically thought that in oxidising conditions (surface waters), the dominant arsenic species is As^V. However, data from the SPE methodology suggests that As^III is the prevalent species in San Juan, indicating a greater influence from reductive processes. La Pampa groundwater had As^III and As^V concentrations of 5–1,332 μg l^?1 and 0.09–592 μg l^?1 for EC and 32–242 μg l^?1 and 30–277 μg l^?1 As for LU, respectively. Detectable levels of MA^V were reported in both provinces up to a concentration of 79 μg l^?1 (equating to up to 33% of the total arsenic). Previously published literature has focused primarily on the inorganic arsenic species, however this study highlights the potentially significant concentrations of organoarsenicals present in natural waters. The potential for separating and preserving individual arsenic species in the field to avoid transformation during transport to the laboratory, enabling an accurate assessment of in situ arsenic speciation in water supplies is discussed.     

Ackee apple (Blighia sapida) seeds: a novel adsorbent for the removal of Congo Red dye from aqueous solutions

The ability of ackee apple (AA) seeds to remove Congo Red (CR) dye from aqueous solution was investigated. AA was characterised using thermo gravimetric analyser, scanning electron microscopy, Braunauer Emmett Teller, pH_pzc, elemental analysis and Boehm titration. The effects of operational parameters such as adsorbent dosage, contact time, initial dye concentration and solution pH were studied in a batch system. pH has a profound influence on the adsorption process. Maximum dye adsorption was observed at pH 3.0. The reaction was fast, reaching equilibrium in 90 min. Adsorption data were best described by Langmuir isotherm and the pseudo-second-order kinetic model with a maximum monolayer coverage of 161.89 mg·g^?1. Both boundary layer and intraparticle diffusion mechanisms were found to govern the adsorption process. Thermodynamic parameters such as standard free energy change (Δ G ⁰), standard enthalpy change (Δ H ⁰), and standard entropy change (Δ S ⁰) were studied. Values of Δ G ⁰ varied between?30.94 and?36.56 kJ·mol^?1, Δ H ⁰ was 25.61 kJ·mol^?1, and Δ S ⁰ was 74.84 kJ·mol^?1·K^?1, indicating that the removal of CR from aqueous solution by AA was spontaneous and endothermic in nature. Regeneration and reusability studies were carried out using different eluents. AA gave the highest adsorption efficiency up to four cycles when treated with 0.3 M HCl. AA was found to be an effective adsorbent for the removal of CR dye from aqueous solution.     

High soil and groundwater arsenic levels induce high body arsenic loads,health risk and potential anemia for inhabitants of northeastern Iran

Arsenic bioavailability in rock, soil and water resources is notoriously hazardous. Geogenic arsenic enters the body and adversely affects many biochemical processes in animals and humans, posing risk to public health. Chelpu is located in NE Iran, where realgar, orpiment and pyrite mineralization is the source of arsenic in the macroenvironment. Using cluster random sampling strategy eight rocks, 23 soils, 12 drinking water resources, 36 human urine and hair samples and 15 adult sheep urine and wool samples in several large-scale herds in the area were randomly taken for quantification of arsenic in rock/soil/water, wool/hair/urine. Arsenic levels in rock/soil/water and wool/hair/urine were measured using inductively coupled plasma spectroscopy and atomic absorption spectrophotometry, respectively. While arsenic levels in rocks, soils and water resources hazardously ranged 9.40–25,873.3 mg kg^?1, 7.10–1448.80 mg kg^?1 and 12–606 μg L^?1, respectively, arsenic concentrations in humans’ hair and urine and sheep’s wool and urine varied from 0.37–1.37 μg g^?1 and 9–271.4 μg L^?1 and 0.3–3.11 μg g^?1 and 29.1–1015 μg L^?1, respectively. Local sheep and human were widely sick and slightly anemic. Hematological examination of the inhabitants revealed that geogenic arsenic could harm blood cells, potentially resulting in many other hematoimmunological disorders including cancer. The findings warn widespread exposure of animals and human in this agroecologically and geopolitically important region (i.e., its proximity with Afghanistan, Pakistan and Turkmenistan) and give a clue on how arsenic could induce infectious and non-infectious diseases in highly exposed human/animals.     

Assessment of heavy metals contamination in soils surrounding a gold mine: comparison of two digestion methods

This study investigated two digestion methods (USEPA 3051: microwave, HNO₃ or Hossner: hot plate, HF–H₂SO₄–HClO₄) for heavy metals analysis in contaminated soil surrounding Mahad AD'Dahab mine, Saudi Arabia. Moreover, contamination metal levels were estimated. The Hossner and USEPA 3051 methods showed, respectively, average total contents of 17.2 and 18.1 mg kg^?1 for Cd, 11.6 and 10.6 mg kg^?1 for Co, 45.7 and 34.7 mg kg^?1 for Cr, 1030 and 1100 mg kg^?1 for Cu, 33,300 and 27,400 mg kg^?1 for Fe, 963 and 872 mg kg^?1 for Mn, 33.2 and 22.8 mg kg^?1 for Ni, 791 and 782 mg kg^?1for Pb, and 6320 and 2870 mg kg^?1 for Zn. A lack of significant differences and a high correlation coefficient (>90%) for Cd, Pb and Cu between the two digestion methods suggest that the total-recoverable method (USEPA 3051) may be equivalent to the total-total digestion method (Hossner) for determining these metals in the studied soil. However, significantly higher concentrations of Cr, Fe, Ni and Zn were found by the Hossner method comapred with the USEPA 3051 method. The soil samples have very or extremely high levels of Zn, Cu, Cd and Pb contamination, indicating very high potential ecological risk.     

Removal of selenite using ‘waste’ Fe(III)/Cr(III) hydroxide: Adsorption kinetics and isotherms

Removal of selenite [Se (IV)] from aqueous solution on to industrial solid ‘waste’ Fe(III)/Cr(III) hydroxide as adsorbent was investigated in the present article. Maximum adsorption was found to be at pH 4.0. Pretreated Fe(III)/Cr(III) hydroxide was found to be more efficient for the removal of selenite compared to untreated adsorbent. Langmuir and Freundlich isotherms have been studied. The Langmuir adsorption capacity (Q ₀) of the pretreated and untreated adsorbents was found to be 15.63 and 6.04?mg?g^?1, respectively. The adsorption process fit into the second-order kinetics. Thermodynamic parameters show that the adsorption process is spontaneous and endothermic in the temperature range 32 to 60°C. Coexisting anions vanadate and phosphate significantly affect the adsorption of selenite for both the pretreated and untreated adsorbents. Molybdate, thiocyanate, sulphate, nitrate and chloride do not significantly affect the removal of selenite for pretreated adsorbent.     

Decolorization of azo dyes by a salt-tolerant Staphylococcus cohnii strain isolated from textile wastewater

The salt-tolerant Staphylococcus cohnii strain, isolated from textile wastewater, has been found effective on decolorizing several kinds of azo dyes with different structures. The optimal conditions for azo dye acid red B (ARB) decolorization by S. cohnii were determined to be pH = 7.0 and 30°C. The decolorization efficiency increased with the increase of the salinity concentration, and around 90% of ARB (100 mg·L^?1) could be decolorized in 24 h when the salinity concentration was up to 50 g·L^?1. Moreover, the strain could still decolorize 19% of ARB in 24 h even when the NaCl concentration was increased to 150 g·L^?1. Meanwhile, the dependence of the specific decolorization rate by S. cohnii on the ARB concentration could be described with Michaelis-Menten kinetics (K _m = 585.7mg·L^?1, V _max = 109.8 mg·g cell^?1·h^?1). The addition of quinone redox mediator, named 2-hydroxy-1,4-naphthoquinone and anthraquinone-2,6-disulfonate, significantly accelerated the decolorization performance of S. cohnii. Furtherly, the activities of azoreductase (0.55 ??mol·mg protein^?1·min^?1) and Nicotineamide adenine dinucleotide-dichlorophenol indophenol (NADH-DCIP) reductase (8.9 ??mol·mg protein^?1·min^?1) have been observed in the crude cell extracts of S. cohnii. The decolorization products of ARB were analyzed by HPLC-MS, and the results indicated the reductive pathway was responsible for azo dye decolorization by S. cohnii.     

Ecotoxicological risks of the abandoned F–Ba–Pb–Zn mining area of Osor (Spain)

Due to its potential toxic properties, metal mobilization is of major concern in areas surrounding Pb–Zn mines. In the present study, metal contents and toxicity of soils, aqueous extracts from soils and mine drainage waters from an abandoned F–Ba–Pb–Zn mining area in Osor (Girona, NE Spain) were evaluated through chemical extractions and ecotoxicity bioassays. Toxicity assessment in the terrestrial compartment included lethal and sublethal endpoints on earthworms Eisenia fetida, arthropods Folsomia candida and several plant species, whereas aquatic tests involved bacteria Vibrio fischeri, microalgae Raphidocelis subcapitata and crustaceans Daphnia magna. Total concentrations of Ba (250–5110 mg kg^?1), Pb (940 to >5000 mg kg^?1) and Zn (2370–11,300 mg kg^?1) in soils exceeded intervention values to protect human health. Risks for the aquatic compartment were identified in the release of drainage waters and in the potential leaching and runoff of metals from contaminated soils, with Cd (1.98–9.15 µg L^?1), Pb (2.11–326 µg L^?1) and Zn (280–2900 µg L^?1) concentrations in filtered water samples surpassing US EPA Water Quality Criteria (2016a, b). Terrestrial ecotoxicity tests were in accordance with metal quantifications and identified the most polluted soil as the most toxic. Avoidance and reproduction tests with earthworms showed the highest sensitivity to metal contamination. Aquatic bioassays performed in aqueous extracts from soils confirmed the results from terrestrial tests and also detected toxic effects caused by the mine drainage waters. Algal growth inhibition was the most sensitive aquatic endpoint. In view of the results, the application of a containment or remediative procedure in the area is encouraged.     

Kinetics of the oxidation of endocrine disruptor nonylphenol by ferrate(VI)

The kinetics of the oxidation of endocrine disruptor nonylphenol (NP) by potassium ferrate(VI) (K₂FeO₄) in water as a function of pH 8.0–10.9 at 25°C is presented. The observed second-order rate constants, k _obs, decrease with an increase in pH 269–32 M^?1 s^?1. The speciation of Fe(VI) (HFeO ₄ ^? and FeO ₄ ^2? ) and NP (NP–OH and NP–O^?) species was used to explain the pH dependence of the k _obs values. At a dose of 10 mg L^?1 (50 μM) K₂FeO₄, the half-life for the removal of NP by Fe(VI), under water treatment conditions, is less than 1 min.     

Coupled electrocoagulation–electro-Fenton for efficient domestic wastewater treatment

This article reports the first use of coupled electrocoagulation and electro-Fenton (EF-EC) to clean domestic wastewater. Domestic wastewater contains high amounts of organic, inorganic and microbial pollutants that cannot be usually treated in a single step. Here, to produce an effluent suitable for discharge in a single process step, a hybrid process combining electrocoagulation and electro-Fenton was simultaneously used to decrease chemical oxygen demand (COD), turbidity and total suspended solids (TSS) from domestic wastewater. The electrocoagulation–electro-Fenton process was firstly tested for the production of H₂O₂ using Ti–IrO₂ and vitreous carbon- or graphite electrodes arranged at the anode and the cathode, respectively. The concentration of H₂O₂ recorded at 1.5 A of current intensity during 60 min of electrolysis using vitreous carbon- and graphite electrodes at the cathode was 4.18 and 1.62 mg L^?1, respectively. By comparison, when the iron electrode was used at the anode, 2.05 and 1.06 mg L^?1 of H₂O₂ were recorded using vitreous carbon and graphite, respectively. The H₂O₂ concentration decrease was attributed to hydroxyl radical formation generated by the Fenton reaction. Electro-Fenton using iron electrode at the anode and vitreous carbon at the cathode with a current density imposed of 0.34 A dm^?2 ensures the removal efficiency of 50.1 % COD_T, 70.8 % TSS and 90.4 % turbidity. The electrocoagulation–electro-Fenton technique is therefore a promising secondary treatment to simultaneously remove organic, inorganic and microbial pollutants from domestic, municipal and industrial wastewaters.     

Purification of contaminated paddy fields by clean water irrigation over two decades

Paddy fields near a mining site in north part of Guangdong Province, PR China, were severely contaminated by heavy metals as a result of wastewater irrigation from the tailing pond. The following clean water irrigation for 2 decades produced marked rinsing effect, especially on Pb and Zn. Paddy fields continuously irrigated with wastewater ever since mining started (50 years) had 1,050.0 mg kg^?1 of Pb and 810.3 mg kg^?1 of Zn for upper 20 cm soil, in comparison with 215.9 mg kg^?1 of Pb and 525.4 mg kg^?1 of Zn, respectively, with clean water irrigation for 20 years. Rinsing effect mainly occurred to a depth of upper 40 cm, of which the soil contained highest metals. Copper and Cd in the farmlands were also reduced due to clean water irrigation. Higher availability of Pb might partly account for more Pb transferred from the tailing pond to the farmland and also more Pb removal from the farmland as a result of clean water irrigation. Neither rice in the paddy field nor dense weeds in the uncultivated field largely took up the metals. However, they might contribute to activate metals differently, leading to a different purification extent. Rotation of rice and weed reduced metal retention in the farmland soil, in comparison with sole rice growth. Harvesting of rice grain (and partially rice stalk) only contributed small fraction of total amount of removed metal. In summary, heavy metal in paddy field resulted from irrigation of mining wastewater could be largely removed by clean water irrigation for sufficient time.