Whole pictures of halogenated disinfection byproducts in tap water from China’s cities

When bromide/iodide is present in source water, hypobromous acid/hypoiodous acid will be formed with addition of chlorine, chloramine, or other disinfectants. Hypobromous acid/hypoiodous acid undergoes reactions with natural organic matter in source water to form numerous brominated/iodinated disinfection byproducts (DBPs). In this study, tap water samples were collected from eight cities in China. With the aid of electrospray ionization-triple quadrupole mass spectrometry by setting precursor ion scans of m/z 35, m/z 81, and m/z 126.9, whole pictures of polar chlorinated, brominated, and iodinated DBPs in the tap water samples were revealed for the first time. Numerous polar halogenated DBPs were detected, including haloacetic acids, newly identified halogenated phenols, and many new/unknown halogenated compounds. Total organic chlorine, total organic bromine, and total organic iodine were also measured to indicate the total levels of all chlorinated, brominated, and iodinated DBPs in the tap water samples. The total organic chlorine concentrations ranged from 26.8 to 194.0 μg·L^–1 as Cl, with an average of 109.2 μg·L^–1 as Cl; the total organic bromine concentrations ranged from below detection limit to 113.3 μg·L^–1 as Br, with an average of 34.7 μg·L^–1 as Br; the total organic iodine concentrations ranged from below detection limit to 16.4 μg·L^–1 as I, with an average of 9.1 μg·L^–1 as I; the total organic halogen concentrations ranged from 31.3 to 220.4 μg·L^–1 as Cl, with an average of 127.2 μg·L^–1 as Cl.     

Removal of multicomponent VOCs in off-gases from an oil refining wastewater treatment plant by a compost-based biofilter system

Waste gases from oil refining wastewater treatment plants are often characterized by the presence of multicomponent and various concentrations of compounds. An evaluation of the performance and feasibility of removing multicomponent volatile organic compounds (VOCs) in off-gases from oil refining wastewater treatment plants was conducted in a pilot-scale compost-based biofilter system. This system consists of two identical biofilters packed with compost and polyethylene (PE). This paper investigates the effects of various concentrations of nonmethane hydrocarbon (NMHC) and empty bed residence time (EBRT) on the removal efficiency of NMHC. Based on the experimental results and practical applications, an EBRT of 66 s was applied to the biofilter system. The removal efficiencies of NMHC were within the range of 47%–100%. At an EBRT of 66 s, the average removal efficiency of benzene, toluene, and xylene were more than 99%, 99%, and 100%, respectively. The results demonstrated that multicomponent VOCs in off-gases from the oil refining wastewater treatment plant could be successfully removed in the biofilter system, which may provide useful information concerning the design criteria and operation of full-scale biofilters.     

郑州市环境空气中VOCs的污染特征及健康风险评价

挥发性有机物（VOCs）不但是引发霾和光化学烟雾等环境问题的重要原因,达到一定浓度时还对人类健康造成威胁.为研究中原地区环境空气中VOCs 污染状况,探查VOCs 对人群健康产生的风险,以中原地区核心城市-郑州为代表,于2012年─2013 年间,在郑州市区内布点,以苏玛罐采样/气相色谱-质谱法分析测定了VOCs 的时空分布,并使用健康风险评价四步法进行健康风险评价.郑州市环境空气中VOCs 年均浓度分布特征：以烷烃和芳香烃为主,分别占总量的23.8%和19.5%;年平均质量浓度,芳香烃类为131 μg·m^-3、烷烃类为118 μg·m^-3,酮类为84.3 μg·m^-3、卤代烷烃类为67.8 μg·m-3;单体化合物以丙酮（66.2 μg·m-3）、乙醇（27.5 μ·m-3）、正十-烷（24.4 μg·m-3）和甲苯（17.2 μg·m-3）质量浓度最高,污染程度在国内居于中等水平.VOCs 季均浓度分布特征：夏季高于冬季,但各类化合物在两季的浓度差异较大.VOCs 日均浓度变化特征：烷烃类和芳烃类化合物于10：00 出现浓度峰值,浓度变化趋势与交通量变化具有相关性.健康风险评价结果为：非致癌风险大于1,会对人群健康造成-定的非致癌危害;苯、四氯化碳、1,2-二氯乙烷、1,1,2-三氯乙烷、六氯丁二烯的致癌指数超过EPA 致癌风险值,但未超出OSHA 致癌风险.     

Observations on metal trends in soil and vegetation samples collected in the vicinity of a hazardous waste incinerator under construction (1996–1998)

The temporal variation in metal concentrations in soil and vegetation samples collected in an area of Catalonia (Spain), which will be under the potential influence of a new hazardous waste incinerator was determined. In 1996 and again in 1998, As, Be, Cd, Cr, Hg, Mn, Ni, Pb, Sn, Tl and V were measured in 40 soil and 40 herbage samples collected at 250–4000 m from the facility at the same sampling points. Data of both surveys and the percentages of variation are here presented for all metals. Results are shown according to the main wind directions in the area, as well as distances from the new facility. During the period 1996–1998, a general decrease was noted for most metals. Only the levels of Hg were significantly increased during this period. The present results will be useful for future surveys aimed to evaluate the environmental impact of metals derived from emissions of the new plant.     

Seasonal and tidal impact on the organic compounds and nutrients distribution in tropical mangroves,Kerala, India

Seasonal changes in the concentration of nutrients and various organic compounds were studied in the waters surrounding mangroves and in the marshy areas of mangroves. Higher amounts of nutrients and organic compounds were observed during low tide. This is due to the remineralisation of plant detritus in this area. High concentration of carbohydrates, proteins, chlorophyll and phosphate were observed during monsoon, which can be attributed to the leaching of plant detritus as well as the land run-off. During pre-monsoon and post-monsoon high tannin and lignin concentration was noted. A 24-hour sampling was also done to study the tidal impact on the concentrations of various organic compounds and nutrients in this ecosystem. Even though a tidal impact was observed, a clear picture was not reported in this study.     

Seasonal and tidal impact on the organic compounds and nutrients distribution in tropical mangroves, Kerala, India

Seasonal changes in the concentration of nutrients and various organic compounds were studied in the waters surrounding mangroves and in the marshy areas of mangroves. Higher amounts of nutrients and organic compounds were observed during low tide. This is due to the remineralisation of plant detritus in this area. High concentration of carbohydrates, proteins, chlorophyll and phosphate were observed during monsoon, which can be attributed to the leaching of plant detritus as well as the land run-off. During pre-monsoon and post-monsoon high tannin and lignin concentration was noted. A 24-hour sampling was also done to study the tidal impact on the concentrations of various organic compounds and nutrients in this ecosystem. Even though a tidal impact was observed, a clear picture was not reported in this study.     

城市污水厂氨气的来源及排放因子研究

通过对城市污水处理厂进行现场调查和分析,选取广州市猎德污水处理厂的格栅、沉砂池、A-B工艺的曝气池、组合交替式(unitank)生化池、污泥浓缩池及脱水机房采集气样,同时在A-B工艺的曝气池、unitank生化池及A-B工艺的沉淀池采集水样,采用模拟实验测试这些污水处理单元的氨挥发速率,并结合理论计算,研究氨气的来源和排放因子.结果表明,A-B工艺的曝气池和unitank工艺的生化池为城市污水处理厂的主要氨排放源.城市污水处理厂污水的氨气平均挥发速率为21.06μg.m-.2s-1,在此基础上计算出其氨气平均排放因子为0.28 g.m-3,其中A-B工艺曝气池的氨排放因子较高,为0.205 g.m-3;unitank生化池的氨排放因子为0.033 g.m-3;A-B工艺沉淀池的氨排放因子较低,为0.0085 g.m-3.     

南京市大气中挥发性有机物污染的研究

1　IntroductionVolatileorganiccompounds (VOCs)areimportantairpollutantsintheurbanatmosphere .SomeVOCsaretoxicandpotentiallycarcinogenic.ExposuretoVOCsisofconcernasitmayresultinsignificantrisktohumanhealth .AmbientVOCsareemittedfromvariousurban ,industrial…     

七种萘有机化合物对活性污泥的抑制作用

本文依据呼吸法测定的微生物耗氧速率,研究了七种萘有机化合物对活性污泥的抑制作用,建立了微生物相对呼吸速率与抑制物浓度之间的定量方程,据此方程计算了七种化合物在废水生物处理系统中的建议最高可容许浓度以及对微生物呼吸的半抑制浓度EC_（50）,并得到了EC_（50）与正辛醇-水分配系数lgK_（ow）之间的线性回归方程。     

Ecotoxicological characterization of tannery wastewater in Dhaka, Bangladesh

Tanning industries are one of the main economic activities in Bangladesh. It has been well documented that wastewater discharged from tanneries without appropriate treatment results in detrimental effects on the ecosystem. No ecotoxicity evaluation of any aquatic environment in Bangladesh has been conducted so far. In this study a battery of toxicity bioassays and chemical analysis were carried out from water samples obtained from three sampling points: upstream from discharging site on River Buriganga (S1), raw wastewater effluent (S2), and downstream the discharging sluice gate (S3), in the Hazaribagh tannery area of Dhaka City, Bangladesh. While S1 and S3 water samples did not show significant toxicity in the bioassays tested, S2 exhibited high acute toxicity to the bacterium Vibrio fischeri (15-min Microtox test, EC50 = 9.8%), the higher plant Lactuca sativa (5-day root elongation inhibition test, EC50 = 14.2%), and the microcrustacean Daphnia magna (24-hour mobility test, EC50 = 31.5%). The results suggested that the raw wastewater effluent had detrimental effects on broad spectrum of organisms in the aquatic ecosystem and bacterium was the most sensitive. The chemical analysis revealed that sample S2 contained an extremely high concentration of chromium (47 g l(-1)). Additionally microbiological analysis indicated that the sampling area is impacted by fecal pollution, increasing the environmental health risk for its inhabitants.     

再生水处理过程中轮状病毒的变化规律及风险评价（Change of Rotavirus in Sewage Treatment Processes and Associated Health Risk Assessment）

为探讨污水处理厂不同处理工艺段对轮状病毒(Rotavirus)的去除效果及再生水回用中轮状病毒对暴露人群的健康风险水平,于2006年11月至2007年10月连续对北京市某污水厂各工艺段出水的轮状病毒进行了分析,并应用Beta-Possion模型对回用再生水中轮状病毒对暴露人群的健康风险水平进行了评价.结果表明,36个实测水样中,轮状病毒检测结果为阳性的样品13个,占总样品数的36.1%.阳性样品主要分布在2006年11月、12月和2007年1月、2月、4月、8月和10月所采集的样品中,各月份阳性样品所占比例分别依次为100%、100%、100%、33.3%、66.7%、33.3%和100%.二级处理工艺对轮状病毒的去除率为2.68-lg,二级处理出水经过混凝沉淀和砂滤两种深度处理后得到再生水,深度处理工艺平均去除率为3.01-lg.二沉出水回用对不同职业暴露人群的年均感染概率风险值范围为0.35×10-2~10.36×10-2,再生水回用不同职业暴露人群年平均感染风险概率值范围为0.23×10-2~6.82×10-2,二沉出水、再生水回用导致的道路喷洒职业工人轮状病毒暴露感染风险值最大,分别达到了39.65×10-2和36.82×10-2,存在着一定的健康风险.     

Evaluation of the performance of rural wastewater treatment plants using chemical measurements in combination with statistical techniques: a case study

The performance of a wastewater treatment plant was assessed statistically using multivariate cluster and principle component analysis. This was after measuring some physico-chemical properties in the influent, effluent, downstream, and upstream waters over a 4-month period. The cluster analysis grouped the sampling sites into three clusters: relatively non-polluted (upstream), medium polluted (downstream), and polluted (influent and effluent). The polluted water was further subdivided into very highly (influent) and highly (effluent) polluted. The grouping of influent and effluent into one cluster was due to some water quality parameters such as amount of copper, lead, and phosphates that are not efficiently removed by the plant. Using principal component analysis, samples from the same site taken over a period of 4 months were scattered, indicating inconsistencies in the performance of the plant. This was more pronounced during the rainy season, suggesting that increased water volumes from open sewers make the already poorly performing plant worse. The major loading factors found by principle component analysis were phosphate, lead, iron, zinc, copper, pH, and conductivity. Generally, the wastewater treatment system was found to be efficient in removing heavy metals and these were found in the sludge, but not anions. The mean percentage metal removal could be arranged in the following decreasing order: iron (85%)?>?zinc (57%)?>?copper (40%) and lead (38%) following the concentrations (mg?kg^?1) found in the sludge: iron (11,300)?>?zinc (820)?>?copper (180)?>?lead (20)?>?cadmium (3). Phosphate and iron concentrations in the effluent were found to be above the South African Bureau of Standards (SABS) recommendations. The major cause of poor performance is the high volume of the wastewater, exceeding the capacity of the plant 10 times.     

Chemical identification and genotoxicity analysis of petrochemical industrial wastewater

The actual harmful effects of industrial wastewater can not be reflected by the conventional water quality index. Therefore, the change in dissolved organic matter and the genetic toxicity of petrochemical wastewater were observed in the current study by examining the wastewater treatment plant of a large petrochemical enterprise in Northwest China. Using XAD-8, MSC, and DA-7 resins, the wastewater was separated into six fractions, namely, hydrophobic acid (HOA), hydrophobic neutral (HOB), hydrophobic alkaline, hydrophilic acid, hydrophilic alkaline, and hydrophilic neutral. Umu-test was used to detect the genetic toxicity of the wastewater samples, and fluorescence spectra were also obtained to examine genetic toxic substances. The results show that wastewater treatment facilities can effectively reduce the concentration of organic matter in petrochemical wastewater (p<0.05). However, the mixing of aniline wastewater can increase the amount of organic carbon (p<0.05) and can overload facilities. This finding shows that the mixed collection and joint treatment of different types of petrochemical wastewater can affect the water quality of the effluent. Particularly, hydrophobic substances can be difficult to remove and account for a relatively large proportion of the effluent. The mixture of aniline wastewater can increase the genetic toxicity of the effluent (p<0.05), and biologic treatment can not effectively decrease the toxicity. Most of the genetic toxicology may exist in the HOA and HOB fractions. Fluorescence spectroscopy also confirms this result, and tryptophan-like substances may play an important role in genetic toxicity.     

DDT und Metaboliten in Sedimenten Berliner Gewässer

Sediment samples from rivers and lakes of Berlin (Germany) were analysed for their contamination with organic compounds by means of qualitative and quantitative GC/MS analysis. The principal compounds detected were PAH, organotin derivates, several classes of chlorinated, brominated and mixed halogenated compounds and some of their related metabolites. The DDT metabolites DDD, DDE, DDCN, DDMU and DDMS were the most abundant compounds of halogenated pesticides in a wide range of samples. The main metabolite determined was p,p′-DDD, with concentrations up to 1230 μg/kg dw. The parent DDT compound was detected in only a few samples. The acute cytotoxicity of selected DDT-metabolites was determined with the permanent cell line RTG-2 from the gonads of the rainbow trout (Oncorhynchus mykiss). The results indicate a high cytotoxic potential of these metabolites. The oestrogenic potential was determined by the Dot-Blot/RNase-Protection-Assay an the order from o,p′-DDT>p,p′-DDMS>p,p′-DDMU≥p,p′-DDCN. Risk assessments based on chemical analysis of DDT, DDD and DDE alone is not able to estimate the real toxic potential of DDT and its metabolites. The development of a method for bioassay directed assessment seems to be an effective strategy to solve this problem. Especially scarce or not available data of combinatory effects, differences between different trophic levels and their availability to biota and low knowledge about the metabolism in situ as well as the enantioselective characteristics of most chiral DDT metabolites warrant future analyses.     

Trace metal distribution in different chemical fractions of marine sediments along the eastern Aegean shelf

The major objective of this study was to carry out sequential chemical extraction for the partitioning of particulate trace metals in sediment samples, collected along the eastern Aegean shelf during cruises July‐August 1994, in the framework of a National Marine Measurement and Monitoring Programme for the Aegean Sea.

Five metals, Cd, Pb, Cu, Zn and Cr were examined in each of sediment samples. Three chemical fractions of the sediments were separated and concentrations of the trace metals were determined by AAS techniques. The three different leaches used were hydroxylamine hydrochloride‐acetic acid, hydrogen peroxide and nitric‐perchloric acids.

Metals were concentrated mainly in the fraction extracted by nitric‐perchloric acids. Lead in the first fraction were found in the sediments of Northern part of Aegean, where the concentration of organic material was high.

The total concentrations of Cd, Cu, Zn, Cr were higher in Izmir Bay than the other sampling points. The distribution of Pb concentrations was the highest in Edremit Bay and Izmir Bay.     

Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.     

香港大气中有毒挥发性有机物研究

用吸附／热脱除－ＧＣ＝／ＭＳ方法研究了香港不同功能区大气中挥发笥有机物的组成。分析结果表明，香港大气中存在６０多种ＶＯＣＳ，其主要成分是苯系物，烷烃和卤代烃。在检出物中有１７种是有毒挥发性有机物，其主要成分是苯系物和氯代烃。其中氯仿，苯，甲苯，四氯乙烯，三氯乙烯和１，２－二氯乙烷是含量最高的组分。     

北京城区屋面径流中PAHs的污染特征与来源解析

以北京典型城区屋面径流中的PAHs为研究对象,在2008年雨季采集了不同地点的屋面径流,分析了溶解相和颗粒相PAHs的质量浓度,对屋面径流中PAHs的质量浓度特征、时空变化规律及来源进行了讨论。结果表明,屋面径流具有较严重的PAHs污染,16种PAHs在溶解相中的总质量浓度为563.85~937.01 ng.L-1,来源主要是机动车排放（31.9%）、煤燃烧（39.6%）、天然气燃烧（15.3%）及石油类的挥发（14.2%）;在颗粒相中的总质量浓度为844.48~1372.62 ng.L-1,来源主要包括燃煤（51.8%）、汽油（38.1%）和柴油（10.1%）的燃烧等。BaP的EMC平均值（172 ng.L-1）远远超过我国污水排放标准（30 ng.L-1）,且以颗粒相为主。不同地点采集的屋面径流中的PAHs质量浓度大部分表现出较明显的初期效应和时间变化,而在不同采样点之间则没有明显的空间差异。     

Verhalten von Nanosilber in Kläranlagen und dessen Einfluss auf die Nitrifikationsleistung in Belebtschlamm

Background, aim and scope The application of nanosilver is increasing. Knowledge on the fate and behavior of nanosilver in wastewater and wastewater treatment plants is scarce. Studies under real world conditions are completely lacking. We studied (1) the impact of nanosilver on the nitrification of sewage sludge, (2) quantified the mass flow of nanosilver in a pilot-plant, and (3) verified the mass balance in a full-scale municipal wastewater treatment plant where nanosilver is introduced to the municipal plant by an indirect discharger. Materials and Methods The addition of four different nanosilver additives on ammonia oxidation in activated sludge has been studied in batch-reactors at two concentrations (1, 100?mg/L Ag) with two exposure times (2?h, 6?days). The pilot-plant treating 70 population equivalents of domestic wastewater is operated with a 12?day sludge age. Nanosilver was applied to the activated sludge tank within two sludge ages. The silver concentrations were measured in sludge and effluent samples during dosing and the following two sludge ages. The adsorption and speciation of silver particles has been analyzed using scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDX). Influent, effluent and sludge were sampled on a full-scale plant (60?000 equivalent inhabitants) and analyzed for silver. Results Silver nitrate, metallic nanosilver, nano-scaled silver chloride and microcomposite silver did not show any effect on ammonia oxidation after the addition of 1?mg/L Ag to the activated sludge (corresponding to 250?mg Ag per kg solids). In contrast, 100?mg/L Ag inhibited the nitrification process by 100?% after the addition of silver nitrate and 20–30?% after addition of colloidal polymer-coated nanosilver. A complete mass balance of the pilot-plant, a steady-state system with known fluxes, demonstrates significant enrichment of silver in the sewage sludge (96?%) after the addition of silver chloride to the plant and small losses of silver into the secondary effluent (4?%). The mass fluxes are similar to metallic colloidal nanosilver investigated under the same conditions. The mass balance has been consistently confirmed by the full-scale study in a municipal wastewater treatment plant. The silver fluxes correspond to the fluxes of the suspended solids in sludge and effluent. Overall, it is estimated that from public wastewater treatment plants about 4–40?mg/a Ag per inhabitant equivalent are discharged annually to the receiving water. The analysis by SEM-EDX demonstrates adsorption and incorporation of nanosilver on biological flocs. This method yields first insight into complex building and transformation of silver associated with sulfide after adding metallic nanosilver and silver chloride to wastewater. Discussion Silver ions released from nanosilver react immediately with large amounts of chloride present in wastewater to form silver chloride. Silver ions may react with organic ligands or sulfide groups additionally. Consequently, even silver nitrate added with 1?mg/L Ag (250?mg Ag/kg TS) to activated sludge did not inhibit nitrification activity. Very high amounts of nanosilver, i.?e. 100?mg/L Ag, overburdened the system and equilibrium condition between silver ion release and ligands was not reached. The mass balance reflects the excellent attachment of nanosilver to activated sludge and biological flocs. Therefore, the main elimination process of nanosilver is attachment to the activated sludge. The elimination of nanosilver is high compared to organic and inorganic micro pollutants omnipresent in wastewater. Any further reduction of suspended solids in the effluent water will reduce the silver load. Conclusions Generally, in wastewater nanosilver occurs bonded to activated sludge flocs and therefore the elimination of nanosilver is efficient under operation conditions typical for wastewater treatment plants. The major fraction of nanosilver is removed from the system by the excess sludge withdrawal. Nonetheless, the efficiency may be further improved by a tertiary filtration step. All analyses of influent, effluent and sludge confirmed that silver exists as silver sulfide. Due to a negligible water solubility of this silver species, silver ions are not subsequently released. Recommendations and perspectives Nanosilver research should be driven to the identification of transformation processes in real environmental matrices and the influence of coatings on the adsorption behavior. There is no need for action to take special measures for nanosilver removal in the area of municipal wastewater treatment plants compared to ubiquitous hazardous organic pollutants may present in wastewater. Nevertheless, source control measures following the precautionary principle should be performed.     

Distribution of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, dioxin-like polychlorinated biphenyl and polycyclic aromatic hydrocarbons in the sediment of Temsah lake, Suez Canal, Egypt

Lake Temsah is one of the main wetlands in the Suez Canal region, and the main source for fish for the area. The lake is the end-point of several wastewater effluents. In the present study, residues of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyl (PCB) and polycyclic aromatic hydrocarbons (PAH) were monitored in the sediment of the lake. Samples were collected from six different sampling stations around the lake using a box-corer sampler, then kept frozen. Samples were extracted and cleaned up before residue determination was conducted using an HRGC/HRMS. An HP 6890 plus gas chromatograph was coupled to a Micromass Autospec Ultima mass spectrometer operating in EI mode at 35 eV and with a resolution of 10.000 (5% valley). PCDDs and PCDFs were detected in all sediment samples collected from various sampling stations. Results showed some progressive increase in PCDDs concentrations relevant to increase in chlorination. In the PCDD group of congeners, 1, 2, 3, 4, 6, 7, 8, 9 octa-CDD had the highest detected concentrations in all samples, while 2, 3, 7, 8 tetra-CDD showed the lowest concentrations. The World Health Organization toxicity equivalents ranged from 0.387 to 11.20 ng kg^-1 d.w. For PCDD homologues, hexa-CDD was the most dominant homologue in all sediment samples analysed. Regarding dioxin-like PCBs, results showed that IUPAC No. 118 congener, 2, 3, 4, 4, 5, pentachlorobiphenyl was the most concentrated of all detected congeners, with concentrations ranging between 0.039 and 43.201 µg kg^-1. For polycyclic aromatic hydrocarbons, benzo(b+k+j)fluoranthene had the highest concentrations in almost all sampling stations. However, fluorene was the smallest detected concentration in almost all stations. This result would indicate that PAH contamination of the lake seems to be coming from one main source in all sampling stations. The present work is the first record of PCCDs, PCCFs, and dioxin-like PCBs in the Temsah lake. The concentrations of the contaminants monitored in this study, especially those of PAHs, are rather alarming. Efforts should be made to stop point sources that contaminate the lake.