Modelling soil phosphorus decline: Expectations of Water Framework Directive policies

Depletion of plant-available soil phosphorus (P) from excessive to agronomically optimum levels is a measure being implemented in Ireland to reduce the risk of diffuse P transfer from land to water. Within the Nitrates and Water Framework Directive regulations the policy tool is designed to help achieve good status by 2015 in water bodies at risk from eutrophication. To guide expectation, this study used soil plot data from eight common soil associations to develop a model of Soil Test P (STP) (Morgan's extract) decline following periods of zero P amendment. This was used to predict the time required to move from excessive (Index 4) to the upper boundary of the optimum (Index 3) soil P concentration range. The relative P balance (P balance : Total soil P) best described an exponential decline (R² = 63%) of STP according to a backwards step-wise regression of a range of soil parameters. Using annual field P balance scenarios (?30 kg P ha^?1, ?15 kg P ha^?1, ?7 kg P ha^?1), average time to the optimum soil P boundary condition was estimated from a range of realistic Total P and STP starting points. For worst case scenarios of high Total P and STP starting points, average time to the boundary was estimated at 7–15 years depending on the field P balance. However, uncertainty analysis of the regression parameter showed that variation can be from 3 to >20 years. Combined with variation in how soil P source changes translate to resulting P delivery to water bodies, water policy regulators are advised to note this inherent uncertainty from P source to receptor with regard to expectations of Water Framework Directive water quality targets and deadlines.     

Exceedance of modern ‘background’ fine-grained sediment delivery to rivers due to current agricultural land use and uptake of water pollution mitigation options across England and Wales

Excessive loss of fine-grained sediment to rivers is widely recognised as a global environmental problem. To address this issue, policy teams and catchment managers require an estimate of the ‘gap’ requiring remediation, as represented by the excess above ‘background’ losses. Accordingly, recent work has estimated the exceedance of modern ‘background’ sediment delivery to rivers at national scale across England and Wales due to (i) current agricultural land cover, cropping and stocking, and (ii) current land use corrected for the uptake of on-farm mitigation measures. This sectoral focus recognises that, nationally, agriculture has been identified as the principal source of fine sediment loss to the aquatic environment. Two estimates of modern ‘background’ sediment loss, based on paleolimnological evidence, were used in the analysis; the target modern ‘background’ (TMBSDR) and maximum modern ‘background’ (MMBSDR) sediment delivery to rivers. For individual (n = 4485) non-coastal water bodies, the sediment ‘gap’ in excess of TMBSDR and MMBSDR, due to current land cover, cropping and stocking, was estimated to range up to 1368 kg ha⁻¹ yr⁻¹ (median 61 kg ha⁻¹ yr⁻¹) and 1321 kg ha⁻¹ yr⁻¹ (median 19 kg ha⁻¹ yr⁻¹), respectively. The respective ranges in conjunction with current land cover, cropping and stocking but corrected for the potential impact of on-farm sediment mitigation measures were up to 1315 kg ha⁻¹ yr⁻¹ (median 50 kg ha⁻¹ yr⁻¹) and 1269 kg ha⁻¹ yr⁻¹ (median 8 kg ha⁻¹ yr⁻¹). Multiplication of the estimates of excess sediment loss corrected for current measure uptake, above TMBSDR and MMBSDR, with estimated maximum unit damage costs for the detrimental impacts of sediment pollution on ecosystem goods and services, suggested respective water body ranges up to 495 £ ha⁻¹ yr⁻¹ and 478 £ ha⁻¹ yr⁻¹. Nationally, the total loss of sediment in excess of TMBSDR was estimated at 1,389,818 t yr⁻¹ equating to maximum environmental damage costs of £523 M yr⁻¹, due to current structural land use, compared to 1,225,440 t yr⁻¹ equating to maximum damage costs of £462 M yr⁻¹ due the uptake of on-farm sediment control measures. The corresponding total loss of sediment in excess of MMBSDR was estimated at 1,038,764 t yr⁻¹ equating to maximum damage costs of £462 M yr⁻¹, compared with 890,146 t yr⁻¹ and £335 M yr⁻¹ correcting excess agricultural sediment loss for current implementation of abatement measures supported by policy instruments. This work suggests that the current uptake of sediment control measures on farms across England and Wales is delivering limited benefits in terms of reducing loadings to rivers and associated environmental damage costs.     

Utilisation of phosphorus nutrient content in industrial scale plasmid DNA production: a waste minimisation study

Human gene therapy is currently seeing an increase in the use of plasmid (pDNA)-based vectors as a preferred choice of vehicle for delivery of the therapeutic gene into the body. In this regard, the environmental impacts of the waste streams from the possible industrial scale manufacture of pDNA require more detailed assessment. In this study, an initial assessment was made of the nutrient phosphorus (P) inputs to four fermentation processes recommended for the industrial scale production of pDNA for the purposes of gene therapy. Phosphorus inputs to each of the four selected fermentation processes ranged from approximately 60 mg l^?1 up to 3000 mg l^?1 in the fresh media. However, the spent media waste from each of the processes exhibited only a minor reduction in the phosphorus concentrations indicating minimal uptake of P by the microorganisms. This unutilised excess level of phosphorus nutrient within the waste streams poses a strong potential for environmental impact. Waste minimisation studies were undertaken on one model fermentation process with the aim of reducing unnecessary phosphorus input. An optimised media containing a 98% reduction in added P to the media was developed. This phosphorus-minimised media had little quantitative effect upon cell biomass produced and no effect upon the quantity or quality of pDNA produced, relative to the control media. The reduction in P requirement results in an overall cost savings of 12% per fermentation batch, would simplify subsequent wastewater treatment and would contribute to slowing the depletion rate of a valuable, finite natural resource.     

Nutrient flows in small-scale peri-urban vegetable farming systems in Southeast Asia—A case study in Hanoi

In many peri-urban areas of Southeast Asia, land use has been transformed from rice-based to more profitable vegetable-based systems in order to meet the increasing market demand. The major management related flows of nitrogen (N), phosphorus (P), potassium (K), copper (Cu) and zinc (Zn) were quantified over a 1-year period for intensive small-scale aquatic and terrestrial vegetable systems situated in two peri-urban areas of Hanoi City, Vietnam. The two areas have different sources of irrigation water; wastewater from Hanoi City and water from the Red River upstream of Hanoi. The first nutrient balances for this region and farming systems are presented. The main sources of individual elements were quantified and the nutrient use efficiency estimated. The environmental risks for losses and/or soil accumulation were also assessed and discussed in relation to long-term sustainability and health aspects.The primary source of nutrient input involved a combination of chemical fertilisers, manure (chicken) and irrigation water. A variable composition and availability of the latter two sources greatly influenced the relative magnitude of the final total loads for individual elements. Despite relatively good nutrient use efficiencies being demonstrated for N (46–86%) and K (66–94%), and to some extent also for P (19–46%), high inputs still resulted in substantial annual surpluses causing risks for losses to surface and ground waters. The surplus for N ranged from 85 to 882 kg ha⁻¹ year⁻¹, compared to P and K which were 109–196 and 20–306 kg ha⁻¹ year⁻¹, respectively. Those for Cu and Zn varied from 0.2 to 2.7 and from 0.6 to 7.7 kg ha⁻¹ year⁻¹, respectively, indicating high risk for soil accumulation and associated transfers through the food chain.Wastewater irrigation contributed to high inputs, and excess use of organic and chemical fertilisers represent a major threat to the soil and water environment. Management options that improve nutrient use efficiency represent an important objective that will help reduce annual surpluses. A sustainable reuse of wastewater for irrigation in peri-urban farming systems can contribute significantly to the nutrient supply (assuming low concentrations of potential toxic or hazardous substances in the water). Nutrient inputs need to be better related to the crop need, e.g. through better knowledge about the nutrient concentrations in the wastewater and improved management of the amount of irrigation water being applied.     

Changes in soil fertility parameters and the environmental effects in a rapidly developing region of China

An extensive knowledge of the temporal variability of soil fertility parameters and how this variation affects the environment is imperative to a wide range of disciplines within agricultural science for optimal crop production and ecosystem preservation. This paper examines the temporal variability of soil pH, organic matter (OM), cation exchange capacity (CEC), total nitrogen (TN), total phosphorus (TP), available phosphorus (P_Av), and available potassium (K_Av) on Cambosols (Entisols) (n = 179) and Anthrosols (Inceptisols) (n = 95) in Zhangjiagang County, China from 1980 to 2004. Nutrient input was monitored from 1983 to 2004. Annual N fertilizer rates were significantly different during three periods (1983–1989, 1989–1999, 1999–2004), where annual rates increased significantly after 1989 and then decreased after 1999. Annual P fertilizer rates were significantly different during two periods (1983–1993, 1993–2004) where annual rates increased after 1993. No change was found in K fertilizer rates. Soil pH marginally increased by 0.14 units in Cambosols, but significantly decreased by 1.02 units in Anthrosols. OM, CEC, and TN increased in both soil orders an average of 2.15 g kg^?1, 1.6 cmol kg^?1, and 0.21 g kg^?1, respectively. TP decreased in Anthrosols by 70 mg kg^?1, P_Av increased in Cambosols by 4.83 mg kg^?1, and K_Av decreased in Cambosols by 15 mg kg^?1. Fertilizer input rates are causing nutrient imbalances, contributing to acidification in Anthrosols, and decreasing C/N ratios. Nutrient loading of N and deficiency of K is also a potential problem in the area. Efforts should be made to readjust soil nutrient inputs to reach an optimal, sustainable level.     

The transport of Cu and Zn from agricultural soils to surface water in a small catchment

Long-term manure-borne copper and zinc inputs (18–324 mg Cu m⁻² yr⁻¹ and 100–800 mg Zn m⁻² yr⁻¹) to grassland soils resulted in their catchment in water concentrations that often exceeded the surface water quality criteria (2 μg Cu l⁻¹ and 5 μg Zn l⁻¹). This paper compares retention and release of Cu and Zn by two types of soil, a mineral soil (MS) and a dark colored soil rich in organic matter (OS). On the basis of dry soil mass, the OS has a higher retention/affinity for Cu and Zn than the MS, but much less Zn accumulated in the MS when compared on an areal basis. This is largely because of the much smaller bulk OS density and larger dissolved metal concentrations in the OS drainage than that for the MS. However, because of the greater water retention capacity of the OS, elevated metal concentrations in the soil solution do not necessarily cause greater loss to water. It is concluded that artificially drained OS can contribute significantly to the observed elevated Cu and Zn concentrations of the river, especially during relatively dry weather conditions when the contribution of water seeping from OS to the total river water discharge becomes increasingly important.     

Carbon footprint of sugar produced from sugarcane in eastern Thailand

Carbon footprint (CFP) of sugar produced from sugarcane in eastern Thailand was estimated from greenhouse gas emissions (CO₂, CH₄, and N₂O) during the sugarcane cultivation and milling process. The use of fossil fuels, chemical and organic fertilizer and sugarcane biomass data during cultivation were collected from field surveys, questionnaires and interviews. Sugar mill emissions, fossil fuel utilization and greenhouse gas emission from wastewater treatments were included. The results show that sugar production has a carbon footprint of 0.55 kg CO₂e kg^?1 sugar. This carbon footprint was a sum of 0.49 kg CO₂e kg^?1 sugar from sugarcane cultivation and 0.06 kg CO₂e kg^?1 sugar from the milling process. For the cultivation part, most of the GHGs emissions were from fertilizer, fossil fuel use and biomass burning. The CFP in eastern Thailand is sensitive to the type of data selected for calculation and of variations of farm inputs during sugarcane cultivation. There was no significant difference of CFP among farm sizes, although small farms tended to give a relatively higher CFP than that of medium and large farms.     

Comparison between background concentrations of arsenic in urban and non-urban areas of Florida

Arsenic contamination is of great environmental concern due to its toxic effects as a carcinogen. Knowledge of arsenic background concentrations is important for land application of wastes and for making remediation decisions. The soil clean-up target level for arsenic in Florida (0.8 and 3.7 mg kg⁻¹ for residential and commercial areas, respectively) lies within the range of both background and analytical quantification limits. The objective of this study was to compare arsenic distribution in urban and non-urban areas of Florida. Approximately 440 urban and 448 non-urban Florida soil samples were compared. For urban areas, soil samples were collected from three land-use classes (residential, commercial and public land) in two cities, Gainesville and Miami. For the non-urban areas, samples were collected from relatively undisturbed non-inhabited areas. Arsenic concentrations varied greatly in Gainesville, ranging from 0.21 to approximately 660 mg kg⁻¹ with a geometric mean (GM) of 0.40 mg kg⁻¹, which were lower than Miami samples (ranging from 0.32 to 112 mg kg⁻¹; GM=2.81 mg kg⁻¹). Arsenic background concentrations in urban soils were significantly greater and showed greater variation than those from relatively undisturbed non-urban soils (GM=0.27 mg kg⁻¹) in general.     

Recycling thin film transistor liquid crystal display (TFT-LCD) waste glass produced as glass–ceramics

The waste electrical and electronic equipment (WEEE) directives are designed to deal with the rapidly increasing waste stream comprised of electrical and electronic equipment. Recycling electrical and electronic equipment reduces the quantity of waste going to final disposal. The demand for thin film transistor liquid crystal display (TFT-LCD) panels, commonly used in everyday electronic products, is increasing. Conventionally adopted treatments of TFT-LCD waste glass cannot meet WEEE directives. This study adopts the following operating conditions in fabricating glass–ceramics: sintering temperature of 800–950 °C; sintering time of 6 h; and, temperature increase rate of 5 °C/min. The glass–ceramic samples then underwent a series of tests, including the Vickers hardness, water absorption and porosity tests, to determine product quality. The Vickers hardness was 12.1 GPa when fired at 900 °C for 6 h, and density was 2.4 g/cm³ and water absorption was 0%. Thus, TFT-LCD waste glass can be regarded as a good glass–ceramic material.     

Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites

At present glass fibre reinforced plastic (GRP) waste recycling worldwide is very limited due to its intrinsic thermoset properties, lack of characterisation data and non availability of viable recycling and recovery routes. In the present study, efforts were made to recycle GRP waste powder and fibre in concrete and cement composites and assess its quality to comply with the British standards for use in construction applications. Results revealed that the mean compressive strength of concrete composites using 5%–50% GRP waste powder under water curing varied from 37 N/mm² to 19 N/mm². Increase in the concentration of GRP waste decreased the compressive strength. However, increase in curing duration (14–180 days) resulted in improving the compressive strength of concrete with 5% GRP application to 45.75 N/mm². Moreover, the density of concrete with 50% GRP waste was reduced by about 12% as compared to the control sample. The bending strength in terms of modules of rupture (MOR) of 12 mm thickness cement composites developed using 5% GRP waste fibre attained 16.5 N/mm². The findings of this work pave the way for further GRP waste recycling in precast construction products for use in various applications.     

Assessing the likelihood of catchments across England and Wales meeting ‘good ecological status’ due to sediment contributions from agricultural sources

This paper is concerned with estimating the gap between current and compliant losses of suspended sediment from the agricultural sector in England and Wales in relation to achieving ‘good ecological status’ (GES) in freshwaters by 2015. Given the emphasis on strategic information for policy support, the assessment necessitated a novel modelling methodology for predicting mean annual total suspended sediment loads (SSL) and time-weighted suspended sediment concentrations (SSC). GES was defined as the guideline annual average SSC of 25 mg l⁻¹ cited by the EC Freshwater Fish Directive. Total suspended sediment inputs to all rivers across England and Wales were estimated using a national sediment source apportionment exercise detailing the contributions from diffuse agricultural and urban sources, eroding channel banks and point sources. The total SSL estimated for each Water Framework Directive (WFD) sub-catchment (n = 7816) across England and Wales was used in conjunction with predicted flow exceedance to derive corresponding SSC time-exceedance plots. Spatial variations in modelled time-averaged SSC compared well with available monitoring data. Given the focus upon national scale, the predictive power of the SSC model (r² = 33%) was considered realistic. The modelling approach provided a means of mapping the probability of annual average SSC being less than the 25 mg l⁻¹ standard for GES due to sediment losses from all potential, as well as from agricultural sources only. In order to meet GES in non-compliant catchments, suspended sediment losses from diffuse agricultural sources will typically need to be reduced by up to 20%, but by as much as 80% in isolated cases.     

Material flows in the life cycle of leather

This paper presents a study on the resource and environmental profile of leather for communicating to the consumers about the environmental burdens of leather products. The results indicate that significant environmental impacts were caused during the tanning and finishing of leather as well as the electricity production and transportation required in the life cycle. The use of fossil fuels in the production of energy has greater impact with increased emissions leading to about 15190 kg CO₂ equivalent of global warming and about 73 kg SO₂ equivalent of acidification while producing 100 m² of leather for shoe uppers. Further resource use of 174 kg of coal, 6.5 kg of fuel oil, 17.4 m³ of water and 348 kg of chemicals of which about 204 kg are hazardous are consumed, and wastewater of about 17 m³, BOD of 55 kg, COD of about 146 kg, TDS of 732 kg and solid waste of about 1445 kg are generated during the life cycle for the production of 100 m² of leather. The total solid waste generated is 1317 kg, out of which about 80% is biodegradable contributed by slaughtering, tanning and finishing stage, 14% is non-biodegradable contributed by tanning, finishing and electricity production stages and 6% is hazardous mainly from tanning and finishing stage of leather.     

Reducing phosphorus in dairy diets improves farm nutrient balances and decreases the risk of nonpoint pollution of surface and ground waters

Reducing phosphorus (P) in dairy diets may result in different types of manure with different chemical composition. Application of these manures to soils may affect the soil P solubility and lead to different environmental consequences. A laboratory incubation study determined the impact of 40 dairy manures on P dynamics in two soil types, Mattapex silt loam (Aquic Hapludult) and Kalmia sandy loam (Typic Hapludult). The manures were fecal samples of lactating cows, collected from commercial dairy farms located in Northeastern and Mid-Atlantic United States, with a wide range of dietary P concentrations (from 2.9 to 5.8 g P kg⁻¹ feed dry matter, DM). Dried and ground fecal samples were mixed with surface horizon (0–15 cm) of soils at 150 kg P ha⁻¹ and the mixtures were incubated at 25 °C for 21 days. At the end of incubation, water soluble P (WS-P) and Mehlich-3 P (M3-P) in the soil–manure mixtures were substantially higher than the control (soil alone) but were lower than the soils receiving fertilizer KH₂PO₄ at 150 kg P ha⁻¹. Similarly, the relative extractability of P in soils amended with low- and high-P manures was always lower (<93%) than KH₂PO₄ suggesting that fertilizer P is more effective at increasing soil solution P in the short-term. Concentrations of WS-P or M3-P in soil–manure mixtures did not differ regardless of the source of manure (i.e. different farms and different diets). This suggests that when the same amount of P is added to soils through manure applications, the solubility or bioavailability of P in soils will be the same. However, P concentrations in feces correlate significantly with that in diets (r = 0.82^**); and when the manures were grouped into high-P diets (averaging 5.1 g P kg⁻¹) versus low-P diets (3.6 g P kg⁻¹), manure P was 40% greater in the high-P group (10.6 g kg⁻¹ DM) than the low-P group (7.6 g kg⁻¹ DM). Thus, lowering excess P in diets would reduce P excretion in manures, P accumulation in soils, improve P balance on farms, require less area for land disposal, and decrease potential for P loss to waters.     

Terra Preta Australis: Reassessing the carbon storage capacity of temperate soils

Soils developed on the sites of Australian Aboriginal oven mounds along the Murray River in SE Australia, classified as Cumulic Anthroposols under the Australian Soil Classification, are shown to have traits similar to the Terra Preta de Indio of the Amazon basin. Seven such sites were characterised and compared with adjacent soils. The Cumulic Anthroposols contained significantly (p < 0.05) more soil carbon (C), compared to adjacent non-Anthroposols. Solid-state ¹³C NMR spectroscopy showed that the C in the Cumulic Anthroposols was predominantly aromatic, especially at depth, confirming the presence of charcoal. Radiocarbon analysis carried out on charcoal collected from two of these sites showed that it was deposited 650 ± 30 years BP at one site and 1609 ± 34 years BP at the other site, demonstrating its recalcitrance in soil. The charcoal originated from plant material, as shown by SEM, and had high levels of Ca agglomeration on its surfaces. The Cumulic Anthroposols were shown to have altered nutrient status, with total N, P, K and Ca being significantly greater than in the adjacent soils throughout the profile. This was also reflected in the higher mean CEC of 31.2 cmol (+) kg^?1 and higher pH by 1.3 units, compared to the adjacent soils. Based on the similarity of these Cumulic Anthroposols with the Terra Preta de Indio of the Amazon, we suggest that these Cumulic Anthroposols can be classified as Terra Preta Australis. The existence of these soils demonstrates that Australian soils, in temperate climates, are capable of storing C in much higher quantities than has been previously recognised, and that this capability is founded on the unique stability and properties of charred organic matter. Furthermore, the addition of charcoal appears to have improved the physical and chemical properties of these soils. Together, this provides important support for the concept of soil amendment with “biochar”, the charred residue produced by pyrolysis of biomass, as a means for sequestering C and enhancing agricultural productivity.     

Comparing intensive,extensified and organic grassland farming in southern Germany by process life cycle assessment

To reduce the environmental burden of agriculture, suitable methods to comprehend and assess the impact on natural resources are needed. One of the methods considered is the life cycle assessment (LCA) method, which was used to assess the environmental impacts of 18 grassland farms in three different farming intensities — intensive, extensified, and organic — in the Allgäu region in southern Germany. Extensified and organic compared with intensive farms could reduce negative effects in the abiotic impact categories of energy use, global warming potential (GWP) and ground water mainly by renouncing mineral nitrogen fertilizer. Energy consumption of intensive farms was 19.1 GJ ha⁻¹ and 2.7 GJ t⁻¹ milk, of extensified and organic farms 8.7 and 5.9 GJ ha⁻¹ along with 1.3 and 1.2 GJ t⁻¹ milk, respectively. Global warming potential was 9.4, 7.0 and 6.3 CO₂-equivalents ha⁻¹ and 1.3, 1.0 and 1.3 CO₂-equivalents t⁻¹ milk for the intensive, extensified and organic farms, respectively. Acidification calculated in SO₂-equivalents was high, but the extensified (119 kg SO₂ ha⁻¹) and the organic farms (107 kg SO₂ ha⁻¹) emit a lower amount compared with the intensive farms (136 kg SO₂ ha⁻¹). Eutrophication potential computed in PO₄-equivalents was higher for intensive (54.2 kg PO₄ ha⁻¹) compared with extensified (31.2 kg PO₄ ha⁻¹) and organic farms (13.5 kg PO₄ ha⁻¹). Farmgate balances for N (80.1, 31.4 and 31.1 kg ha⁻¹) and P (5.3, 4.5 and −2.3 kg ha⁻¹) for intensive, extensified and organic farms, respectively, indicate the different impacts on ground and surface water quality. Analysing the impact categories biodiversity, landscape image and animal husbandry, organic farms had clear advantages in the indicators number of grassland species, grazing cattle, layout of farmstead and herd management, but indices in these categories showed a wide range and are partly independent of the farming system.     

Long-term impact of a gliricidia-maize intercropping system on carbon sequestration in southern Malawi

Tree/crop systems under agroforestry practice are capable of sequestering carbon (C) in the standing biomass and soil. Although studies have been conducted to understand soil organic C increases in some agroforestry technologies, little is known about C sequestered in simultaneous tree/crop intercropping systems. The main objective of this study was to determine the effect of agroforestry practice on C sequestration and CO₂-C efflux in a gliricidia-maize intercropping system. The experiment was conducted at an experimental site located at the Makoka Agricultural Research Station, in Malawi. The studies involved two field plots, 7-year (MZ21) and 10-year (MZ12), two production systems (sole-maize and gliricidia-maize simultaneous intercropping systems). A 7-year-old grass fallow (Grass-F) was also included. Gliricidia prunings were incorporated at each time of tree pruning in the gliricidia-maize. The amount of organic C recycled varied from 0.8 to 4.8 Mg C ha⁻¹ in gliricidia-maize and from 0.4 to 1.0 Mg C ha⁻¹ in sole-maize. In sole-maize, net decreases of soil carbon of 6 Mg C ha⁻¹ at MZ12 and 7 Mg C ha⁻¹ at MZ21 in the topsoil (0–20 cm) relative to the initial soil C were observed. After 10 years of continuous application of tree prunings C was sequestered in the topsoil (0–20 cm) in gliricidia-maize was 1.6 times more than in sole-maize. A total of 123–149 Mg C ha⁻¹ were sequestered in the soil (0–200 cm depth), through root turnover and pruning application in the gliricidia-maize system. Carbon dioxide evolution varied from 10 to 28 kg ha⁻¹ day⁻¹ in sole-maize and 23 to 83 kg ha⁻¹ day⁻¹ in gliricidia-maize. We concluded that gliricidia-maize intercropping system could sequester more C in the soil than sole-maize.     

Performance and water-use efficiency (single-leaf vs. whole-canopy) of well-watered and half-stressed split-root Lambrusco grapevines grown in Po Valley (Italy)

‘Lambrusco a foglia frastagliata’ grapevines (Vitis vinifera L.) were grown outdoors at Piacenza (44°55′N, 9°44′E, Po Valley, Italy) with the root system split between two 30-L pots and subjected from pre-veraison (17 July) to harvest (5 September) to soil drying of half of the root system (HS) induced by withholding water from one of the two pots as compared to well-watered (WW) vines (both pots daily recharged at field capacity). Volumetric soil-water content, pre-dawn and mid-morning leaf water potential, single-leaf gas-exchange as assimilation rate, stomatal conductance and transpiration were monitored throughout the trial. Whole-canopy gas-exchange as net CO₂ exchange rate (NCER) and transpiration were tracked from 31 August to 7 September on three vines per treatment on a 24-h basis using an enclosure method. Primary leaf carbon isotope (δ¹³C) composition, yield components and must composition were determined at harvest.Withdrawing water from one pot triggered a water stress response showing higher stomatal sensitivity to changes in air vapour pressure deficit, relatively low assimilation rates, high intrinsic and extrinsic water-use efficiency (WUE) and earlier cessation of shoot growth. Yet, mid-morning leaf water potential was consistently lower in HS treatment over stress as compared to WW, indicating an anisohydric adjustment. Canopy NCER given on a leaf-area basis showed mean daily rates ranging from 3.9 to 4.9 μmol m² s^?1 in WW canopies against 2.6–3.0 μmol m^?2 s^?1 in HS. Conversely, canopy transpiration rates varied from 0.915 to 1.157 mmol m^?2 s^?1 for WW to 0.630–0.714 mmol m² s^?1 in HS. Increased leaf-based intrinsic and extrinsic WUE in HS did not match the canopy response, which to some extent resulted in an opposite outcome, i.e. higher canopy WUE in well-watered vines especially in the morning hours. Likewise, δ¹³C did not differ between treatments. This suggests caution when point-time determinations of single-leaf-based WUE are extrapolated to the whole-canopy behaviour when assessing the water saving strategies of a given genotype. The stressed vines achieved no variation in yield level and components and had improved grape composition as to soluble solids and total anthocyanins. This optimal behaviour is likely due to earlier shoot growth cessation, enhanced maturity and a buffering leaf-to-fruit ratio (3.61 m² kg^?1) that mitigated the effects of post-veraison stress.     

Biogas production from maize and dairy cattle manure—Influence of biomass composition on the methane yield

There is an increasing world wide demand for energy crops and animal manures for biogas production. To meet these demands, this research project aimed at optimising anaerobic digestion of maize and dairy cattle manures. Methane production was measured for 60 days in 1 l eudiometer batch digesters at 38 °C. Manure received from dairy cows with medium milk yield that were fed a well balanced diet produced the highest specific methane yield of 166.3 Nl CH₄ kg VS⁻¹. Thirteen early to late ripening maize varieties were grown on several locations in Austria. Late ripening varieties produced more biomass than medium or early ripening varieties. On fertile locations in Austria more than 30 Mg VS ha⁻¹ can be produced. The methane yield declined as the crop approaches full ripeness. With late ripening maize varieties, yields ranged between 312 and 365 Nl CH₄ kg VS⁻¹ (milk ripeness) and 268–286 Nl CH₄ kg VS⁻¹ (full ripeness). Silaging increased the methane yield by about 25% compared to green, non-conserved maize. Maize (Zea mays L.) is optimally harvested, when the product from specific methane yield and VS yield per hectare reaches a maximum. With early to medium ripening varieties (FAO 240–390), the optimum harvesting time is at the “end of wax ripeness”. Late ripening varieties (FAO ca. 600) may be harvested later, towards “full ripeness”. Maximum methane yield per hectare from late ripening maize varieties ranged between 7100 and 9000 Nm³ CH₄ ha⁻¹. Early and medium ripening varieties yielded 5300–8500 Nm³ CH₄ ha⁻¹ when grown in favourable regions. The highest methane yield per hectare was achieved from digestion of whole maize crops. Digestion of corns only or of corn cob mix resulted in a reduction in methane yield per hectare of 70 and 43%, respectively. From the digestion experiments a multiple linear regression equation, the Methane Energy Value Model, was derived that estimates methane production from the composition of maize. It is a helpful tool to optimise biogas production from energy crops. The Methane Energy Value Model requires further validation and refinement.     

Effects of different diets on utilization of nitrogen from cattle slurry applied to grassland on a sandy soil in The Netherlands

Dietary adjustments have been suggested as a means to reduce N losses from dairy systems. Differences in fertilizing value of dairy slurry as a result of dietary adjustments were evaluated in a 1-year grassland experiment and by long-term modelling. Slurry composition of non-lactating dairy cows was manipulated by feeding diets with extreme high and low levels of dietary protein and energy. C:N_total ratio of the produced slurries ranged from 5.1 to 11.4. To evaluate their short-term fertilizer N value, the experimental slurries (n = 8) and slurries from commercial farms with variable composition (n = 4), were slit-injected in two grassland fields on the same sandy soil series in the north of The Netherlands (53°10′N, 6°04′E), with differences in sward age and ground water level. The recently established grassland field (NEW) was characterized by lower soil OM, N and moisture contents, less herbs and more modern grass varieties compared to the older grassland field (OLD). Slurry was applied in spring (100 kg N ha⁻¹) and after the first cut (80 kg N ha⁻¹) while in total four cuts were harvested. Artificial fertilizer N treatments were included in the experiment to calculate the mineral fertilizer equivalent (MFE) of slurry N. The OLD field showed a higher total N uptake whereas DM yields were similar for the two fields. Average MFE of the slurries on the OLD field (47%) was lower than on the NEW field (56%), probably as a result of denitrification of slurry N during wet conditions in spring. Slurries from high crude protein diets showed a significantly higher MFE (P < 0.05) compared to low crude protein diets. No significant differences in MFE were observed between slurries from high and low energy diets. On both fields, MFE appeared to be positively related to the ammonium content (P < 0.001) and negatively to the C:N_total ratio of the slurry DM (P = 0.001). Simulation of the effect of long-term annual application of 180 kg N ha⁻¹ with highest and lowest C:N_total ratio suggested that both slurries would lead to an increase in annual soil N mineralization. Both soil N mineralization and SOC appeared to be substantially higher in equilibrium state for the slurry with the highest C:N_total ratio. It is concluded that in a situation with slit-injection, the reduced first-year N availability of slurry with a high C:N_total ratio as observed in the grassland experiment will only be compensated for by soil N mineralization on the very long term.     

Fine tuning water quality regulations in agriculture to soil differences

Groundwater quality has been defined in terms of threshold values for nitrate (50 mg l⁻¹) and pesticides (0.1 μg l⁻¹ active substance). Variability in space and time, and cost and safety considerations have made it unattractive to verify water quality by repeated measurements. Proxy values have, therefore, been defined to characterise water quality. For nitrate, maximum allowable fertilisation rates have been specified and farmers have to apply the MINAS book-keeping system to keep track of their N-flows. For pesticides, listing of allowed pesticides functions as another proxy quality measure. Field tests and simulations on a Dutch farm demonstrated that water quality assessment using these proxy values does not correspond with direct assessment based on measurements and a comparison with the threshold values, which represent the true standard. A second problem is the generic character of the proxy methods, which do not reflect quite different nitrate and pesticide dynamics in different types of soil. These problems make the proxy approach quite problematic. We, therefore, propose the systematic introduction of information technology to be used for deriving soil-specific management practices that do not lead to an increase of the thresholds. Existing techniques for precision agriculture can be used, and the current registration of all parcels in The Netherlands in a geographical information system, including occurrence of different soil types, will be quite helpful. Such an information system on internet will allow better control than the current generic proxy systems and is likely to be quite motivating to farmers.