Detoxification of hexachlorobenzene by dechlorination with potassium-sodium alloy

Dechlorination of hexachlorobenzene (HCB) was achieved by a liquid potassium–sodium (K–Na)-alloy. HCB in a cyclohexane/benzene solution (22 mmol/l, 4.67 g/l as chlorine) was dechlorinated by almost 100% after a 30-min reaction, indicating high reactivity of K–Na alloy and high proton donating power of cyclohexane. Decreasing orders of chlorobenzenes identified after a 15-min reaction, by amount were 1,2,3,4- > 1,2,3,5- > 1,2,4,5- for tetrachlorobenzenes, 1,2,4- > 1,2,3- > 1,3,5- for trichlorobenzenes, and 1,4- > 1,3- > 1,2- for dichlorobenzenes. It was hypothesized that once one chlorine atom in HCB was replaced with a proton, the adjacent chlorine atom to the proton tended to be replaced with another hydrogen atom. A total of 63 PCBs formed via the Wurtz–Fittig reaction were identified as by-products in the sample after a 15-min reaction. Among PCBs found, 2,3^′,4^′,5-tetrachlorobiphenyl, which was a product from 1,2,4-trichlorobenzene formed via the Wurtz–Fittig reaction, was detected in relatively high concentration (48.9 nmol/ml). The sample obtained from a reaction mixture after 30 min contained only 14 PCBs in trace amounts, indicating that the PCBs formed were also further dechlorinated by K–Na alloy. Non-chlorinated compounds––such as methylbenzene, dimethylbenzene, dimer of tetrahydrofuran, and dicyclohexyl (dimer of cyclohexane)––were also identified in the samples. A method using K–Na alloy developed in the present study dechlorinated satisfactorily HCB at room temperature.     

Update of daily intake of PCDDs, PCDFs, and dioxin-like PCBs from food in Japan

Total diet study (TDS) samples of 14 food groups from 16 locations in Japan, collected in 1999 and 2000, were analyzed for polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) to estimate the update of daily intake of these contaminants from food. The mean daily intake of toxic equivalency (TEQ) for an adult weighing 50 kg, calculated at non-detected isomer concentrations equal to zero (ND=0), was estimated to be 2.25 pg TEQ/kg b.w./day. When non-detected isomer concentrations are assumed to be equal to half of the limits of detection (ND=1/2 LOD), the mean daily intake was estimated to be 3.22 pg TEQ/kg b.w./day. These values were below the tolerable daily intake (TDI) of 4 pg TEQ/kg b.w. for PCDD/Fs and dioxin-like PCBs set in Japan. In both the estimates, the mean daily intakes were highest from fish and shellfish (76.9% at ND=0 and 53.9% at ND=1/2 LOD of the total TEQs), followed by those from meat and eggs (15.5% at ND=0 and 11.7% at ND=1/2 LOD of the total TEQs). Congener specific data revealed that these total TEQ levels were dominated by 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and 3,3^′,4,4^′,5-PeCB in each case (71.7% at ND=0 and 63.1% at ND=1/2 LOD of the total TEQs). The dioxin-like PCBs (non-ortho and mono-ortho PCBs) accounted for about 50% of these total TEQs. These data will be very useful in the risk assessment of PCDD/Fs and dioxin-like PCBs from food in Japan.     

Identification of a novel PCB source through analysis of 209 PCB congeners by US EPA modified method 1668

PCDD/Fs and PCBs in surface waters and effluent waste streams flowing into New York/New Jersey Harbor were sampled by large volume filtration and solid phase extraction (XAD-2). Passive hexane samplers were employed in sewer trackdown. Extraction media were analyzed for 2,3,7,8 substituted PCDD/Fs and all 209 PCB congeners. The non-Aroclor PCB congener, 3,3^′-DiCB, was ubiquitous in the harbor and was found to be associated with pigment manufacture. Knowledge of inadvertent synthesis of non-Aroclor PCBs is not new but its magnitude and the generation of congeners with dioxin-like properties from this process is novel.     

Effect of aging on catalytic properties in mechanochemical degradation of pentachlorophenol by birnessite

Mechanochemistry, a technique concerning with milling contaminated samples for prolonged times, induces massive degradation of pollutants by grinding them in ball mills with different soil components or additives. In the present study, laboratory experiments were conducted to evaluate the effect of aging on the mechanochemical efficiency of the Mn-oxide birnessite in degrading pentachlorophenol (PCP). A comparative study on an aged birnessite (KBiA), used after 3 years from synthesis, and a fresh birnessite (KBiF), employed immediately after synthesis, was carried out. The differences between the two birnessites, evidenced by spectroscopic and diffractometric techniques, are mainly relative to reduction of the Mn(IV) centered at the MnO₆ octahedra layers from the birnessite structure, which represent the most reactive sites for PCP degradation. The long term air drying at room temperature, by favouring reduction of Mn(IV) to Mn(III), produces an inorganic substrate that offers paucity of the less reactive sites for PCP degradation, thus reducing the oxidative potential of the KBiA. Accordingly, the more reactive fresh birnessite was employed in the experiment with a polluted soil. Adding a small amount of KBiF to soil only induces a light increase in PCP removal, probably due to the mechanically induced PCP adsorption and transformation onto clay minerals present in the soil. Besides, adding a higher dose of birnessite causes a stronger degradation of PCP.     

Effect of metal and glycol on mechanochemical dechlorination of polychlorinated biphenyls (PCBs)

This paper assesses the potential of mechanochemical method with fine metal powder, glycol and alkali for polychlorinated biphenyls (PCBs) removal from waste insulating oil. The effects of relevant parameters, such as kinds of chemicals, rate and time of milling were examined. After each run, the total PCBs content in waste insulating oil was measured. Polyethylene glycol 200, long chain-glycol was more effective than triethylene glycol and ethylene glycol, short chain-glycol as hydrogen donor in mechanochemical dechlorination of PCBs. A maximum of 99.9% PCBs removal (below 2ppm) and 94% total chlorine removal were achieved with the mechanochemical process for 2h.     

Analysis of Ah receptor pathway activation by brominated flame retardants

Brominated flame-retardants (BFRs) are used as additives in plastics to decrease the rate of combustion of these materials, leading to greater consumer safety. As the use of plastics has increased, the production and use of flame-retardants has also grown. Many BFRs are persistent and have been detected in environmental samples, raising concerns about the biological/toxicological risk associated with their use. Most BFRs appear to be non-toxic, however there is still some concern that these compounds, or possible contaminants in BFRs mixtures could interact with cellular receptors. In this study we have examined the interaction of decabromodiphenyl ether, Firemaster BP4A (tetrabromobisphenol A), Firemaster PHT4 (tetrabromophthalic anhydride), hexabromobenzene, pentabromotoluene, decabromobiphenyl, Firemaster BP-6 (2,2^′,4,4^′,5,5^′-hexabromobiphenyl) and possible contaminants of BFR mixtures with the Ah receptor. Receptor binding and activation was examined using the Gel Retardation Assay and increased expression of dioxin responsive genes was detected using the reporter gene based CALUX assay. The results demonstrate the ability of BFRs to activate the AhR signal transduction pathway at moderate to high concentrations as assessed using both assays. AhR-dependent activation by BFRs may be due in part to contaminants present in commercial/technical mixtures. This was suggested by our comparative analysis of Firemaster BP-6 versus its primary component 2,2^′,4,4^′,5,5^′-hexabromobiphenyl. Some technical mixtures of brominated flame-retardants contain brominated biphenyls, dioxins or dibenzofurans as contaminants. When tested in the CALUX assay these compounds were found to be equivalent to, or more active than their chlorinated analogues. Relative effective potency values were determined from dose response curves for these brominated HAHs.     

Peroxidative degradation of selected PCB: a mechanistic study

The enzyme-induced decomposition and biodegradation of PCB were investigated. 2,5-Dichlorobiphenyl (PCB 9) and 2,2^′,5,5^′-tetrachlorobiphenyl (PCB 52) were used as example compounds to study efficiency and mechanism of the degradation processes. It was found that the application of horseradish peroxidase (HRP) together with defined amounts of hydrogen peroxide removed 90% of the initial concentration of PCB 9 and 55% of the initial concentration of PCB 52 from an aqueous solution after a reaction period of 220 min. Dechlorination was observed as the initial step. Although the metabolites identified were mainly chlorinated hydroxybiphenyls, benzoic acids and non-substituted 1,1^′-biphenyl, some higher chlorinated biphenyl isomers also appeared. The biodegradation of PCB 9 using the white rot fungus Trametes multicolor took about four weeks and reduction was about 80% of the initial concentration. The metabolites produced (dichlorobenzenes, chlorophenols and alkylated benzenes) were not quite the same as those observed upon incubation with HRP.     

Transepithelial transport and cellular accumulation of steroid hormones and polychlorobiphenyl in porcine kidney cells expressed with human P-glycoprotein

Endocrine disrupters such as sex hormone-like chemicals and the non-physiological ligands for aryl hydrocarbon receptor (AhR) exert many adverse biological effects. The ligands for AhR disturb gene expression downstream of the gene induced by estrogen receptor at a very low concentration. Thus, transepithelial transport and cellular accumulation of cortisol (COR) and estrogen as congeners of sex hormone-like chemicals, and 3,3^′,4,4^′-tetrachlorobiphenyl (TeCB) as one of the ligands for AhR were examined in a monolayer of porcine kidney cells transfected with human P-glycoprotein (LLC-COL). The net basal-to-apical transport of COR increased in LLC-COL compared to that in the wild type cells (LLC-PK1) the same as in vinblastine, whereas the net transport of estradiol (EST) was not detected in either cell group. Though the diffusion transports of EST for both directions, basal-to-apical and apical-to-basal, were higher than that of COR, cellular accumulation of EST was higher than that of COR. Transepithelial transport of TeCB was very low and the net basal-to-apical transport was not detected, while it was highly accumulated in the epithelial cells. The accumulation was slightly higher in LLC-COL than in LLC-PK1 at high dose.     

Reductive dechlorination of non-ortho substituted polychlorinated biphenyls by ultraviolet irradiation in alkaline 2-propanol

The photodechlorination pathways of 3,3′,4,5,5′-pentachlorobiphenyl (3,3′,4,5,5′-PentaCB) and the related lower polychlorinated biphenyl congeners irradiated at 254 nm in alkaline 2-propanol were elucidated. Steric effect is the most important factor for controlling the dechlorination pattern of these substrates. Electronic effect also influences the photoreactivity of chlorine substituents.     

Fate and effects of pentachlorophenol in hard- and soft-water microcosms

The influence of hard water and soft water on the fate and effects of pentachlorophenol (PCP) was investigated in small microcosms. Minor differences in the fate of PCP and minor changes in microcosm structure were noted between the hard- and soft-water systems. Definite differences between hard-and soft-water systems were detected in dissolved oxygen production and dissolved silica concentration at an exposure concentration of 4 mg 1⁻¹ PCP.     

The internal barriers of rotation for the 209 polychlorinated biphenyls

The internal barrier of rotation (Erot) was calculated for all 209 polychlorinated biphenyls (PCBs) by using a semi-empirical method, viz. the Austin Model 1 (AMI) Hamiltonian. The difference in total energy between a forced planar state and an optimised twisted structure was defined as Erot. The Erot values were in the range of 8.33 to 483 kj/mol, and were significantly influenced by the number of chlorine atoms inortho position. An additional structural characteristic of the PCBs influencing Erot ofortho substituted congeners was substitution by chlorine atoms in vicinalmeta positions, which is assumed to prevent outward bending ofortho substituents. This so-called buttressing effect contributed with 4 to 31 kj/mol per added chlorine atom. In conclusion, the internal barrier of rotation, calculated for all 209 PCBs, provides an important structure dependent physico-chemical parameter for multivariate modelling of future quantitative structure-activity and structure-property relationships (QSARs/QSPRs).     

Polychlorinated biphenyls in different trophic levels from a shallow lake in Argentina

Polychlorinated biphenyls (PCBs) were determined in a aquatic community from Los Padres Lake, Argentina. Twenty four PCB congeners from tri- to octa-chlorinated isomers were detected and quantified using conventional gas chromatography with electron capture detector (GC-ECD). The aim of this study was to investigate the concentrations of PCBs in freshwater organisms from a shallow lake of Argentina. Stems of bulrush (Schoenoplectus californicus), whole tissues of false loosestrife (Ludwigia sp.) and grass shrimp (Palaemonetes argentinus), and liver, gonads, muscle and mesenteric fat (if present) of fish species (Rhamdia sapo) and (Oligosarcus jenynsi) were analyzed. Two areas were selected to macrophytes sampling: the input area, main PCB source of the lake (Station 1), and the output area, a potential anoxic zone (Station 2). Macrophytes from Station 1 bioconcentrated higher total PCB levels than Station 2, showing that the former have received PCBs washed down from upstream areas. Penta- and hexa-congeners were enriched relative to other congeners in animal biota and macrophytes from Station 1, consistent with commercial mixture of Aroclor 1254 used in this region. In bulrush from Station 2 a predominance of tri- and tetra-chlorinated congeners was observed. Grass shrimp showed the lowest PCB values among animal biota. PCB concentrations in fish tissues varied with the species and the gonadal development. Mesenteric fat, only present in post-spawning organisms of R. sapo, had the highest values of PCBs relative to other tissues. A clearance of total PCBs in ovaries of post-spawning females of R. sapo was observed, but not in testes. O. jenynsi/P. argentinus biomagnification factor (BMF) had a mean value of 18.7. Congeners 44, 52 and 151, showed the highest BMF values, being 64, 66 and 62, respectively. These values would be a consequence of the low depuration rate of 44 and 52 congeners with orthochlorine substitution conducted by O. jenynsi and the high depuration rate of congener 151, which lacks 4 4^′- chlorine substitution, carried out by grass shrimp. Although the most of congeners have been biomagnified, they did not clearly displayed a concomitantly increasing with log K_ow.     

Recent survey and effects of cooking processes on levels of PCDDs,PCDFs and Co-PCBs in leafy vegetables in Japan

We report here the latest levels of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/Fs) and coplanar polychlorinated biphenyls (Co-PCBs) in leafy vegetables in Japan as well as the effect of cooking processes on the reduction of these contaminants. Three kinds of leafy vegetables (“komatsuna”, lettuce and spinach) from seven districts in Japan in 1998 were analyzed for the 2,3,7,8-chlorine substituted PCDD/Fs and three non-ortho-PCBs (#77, 126 and 169). The mean total TEQ levels (using the WHO-TEFs) in the komatsuna, lettuce and spinach were 0.094, 0.025 and 0.196 pg/g fresh weight, respectively. The TEQ levels are dominated by 2,3,7,8-TCDD, 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and 3,3^′,4,4^′,5-PeCB in many of the samples. For one of these isomers, the 2,3,4,7,8-PeCDF TEQ levels showed good correlation with the total TEQ levels in the samples (r=0.957). This suggests that 2,3,4,7,8-PeCDF may be an indicator for dioxin contamination in the analysis of the leafy vegetables. Also, the effects of two cooking processes (washing and washing followed by boiling) on the dioxin levels in two types of spinach samples were investigated. On average, in both samples, the total concentrations of the PCDDs, PCDFs and Co-PCB were reduced to about 38%, 73% and 88% of the initial concentrations by washing, and to 21%, 35% and 61% of the initial concentrations by washing followed by boiling. The total TEQ levels were reduced to about 30% of the initial TEQ levels by washing followed by boiling. Significant reductions in the TEQ levels were observed in the cooked samples. Thus, the cooking processes may reduce the risk of dioxin intake from the leafy vegetables.     

Simultaneous removal of nitrate and pentachlorophenol from simulated groundwater using a biodenitrification reactor packed with corncob

Both nitrate and pentachlorophenol (PCP) are familiar pollutants in aqueous environment. This research is focused on the simultaneous removal of nitrate and PCP from simulated contaminated groundwater using a laboratory-scale denitrification reactor packed with corncob as both carbon source and biofilm support. The reactor could be started up readily, and the removal efficiencies of nitrate and PCP reached up to approximately 98 % and 40–45 % when their initial concentrations were 50 mg N/L and 5 mg/L, respectively, after 15-day continuous operation at 10 h of hydraulic retention time (HRT) and 25 °C. Approximately 91 % of PCP removal efficiency was achieved, with 2.47 mg/L of chloride ion release at 24 h of HRT. Eighty-two percent of chlorine in PCP removed was ionized. The productions of 3-chlorophenol and phenol and chloride ion release indicate that the reductive dechlorination reaction is a major degradation pathway of PCP under the experimental conditions.     

A survey of PCB congeners in U.K. cows'' milk

Samples of unpasteurised bulked milk, taken directly from ten herds of dairy cattle on rural and urban farms in the north west of England on five separate sampling occasions, were analysed for a range of PCB congeners. ΣPCB concentrations (sum of 37 congeners) ranged from 3.4–16.4 ng/g milk fat with a mean ΣPCB concentration of 8.4 ng/g milk fat. The dominating congeners were 118, 153, 138 and 180, which contributed 15%, 20%, 17% and 9% of the ΣPCB load respectively. The chlorine pattern of the congeners which made moderate or major contributions to the ΣPCB concentration were typically substituted at both para positions (4, 4′), while the PCB congeners not detected in the milk had at least one ring that was not 4-substituted. These results indicate the 4,4′ substitution pattern as being the key to PCB persistence in cows. It is estimated that consumption of typical daily intakes of milk with the PCB concentrations measured in this study would contribute 11 % of the average daily ΣPCB intake for individuals in the UK. This contribution would increase to 30% when exposure through the consumption of dairy products prepared from such milk (e.g. cheese, butter) is taken into account. It is estimated that the inclusion of the TEF assigned PCBs would typically increase the TEQ rating of cows' milk by approximately 40% over that attributed to PCDD/Fs alone.     

Persistency of highly toxic coplanar PCBs in aquatic ecosystems: uptake and release kinetics of coplanar PCBs in green-lipped mussels (Perna viridis Linnaeus)

The bioaccumulation potential of three highly toxic coplanar PCB isomers [3,3',4,4'-tetrachlorobiphenyl (T(4)CB); 3,3',4,4',5-pentachlorobiphenyl (P(5)CB); and 3,3',4,4',5,5'-hexachlorobiphenyl (H(6)CB)] was investigated using green-lipped mussels (Perna viridis Linnaeus) as a bioindicator, through a transplantation experiment at two locations in Hong Kong waters. By contrast to the relatively rapid uptake and release of many other PCB isomers, the non-ortho chlorine substituted coplanar PCB congeners exhibited slow uptake and clearance. The kinetic parameters of coplanar PCBs based on lipid weight-related data, and the degree of bioaccumulation based on the proportion of coplanar PCBs in total PCBs in mussels, clearly indicate that coplanar PCBs are highly bioaccumulative in lower organisms. On the assumption that mussels are unlikely to be particularly unusual with respect to their bioaccumulation of coplanar PCBs, it appears most likely that these highly toxic and persistent PCB congeners are concentrated by all aquatic organisms, and may reach higher consumers (including humans) in quantities of toxicological concern.     

Resistant sorption of in situ chlorobenzenes and a polychlorinated biphenyl in river Rhine suspended matter

The desorption kinetics of in situ chlorobenzenes (dichlorobenzenes, pentachlorobenzene and hexachlorobenzene) and 2,4,4^′-trichlorobiphenyl (PCB-28) were measured with a gas-purge technique for river Rhine suspended matter sampled in Lobith, The Netherlands. This suspended matter is the main source of sediment accumulation in lake Ketelmeer. In lake Ketelmeer sediment earlier observations showed that slow and very slow fractions dominate the desorption profile.

For the river Rhine suspended matter, only for PCB-28 a fast desorbing fraction of around 1.6% could be detected. The observed rate constants were on the average 0.2 h⁻¹ for fast desorption, 0.004 h⁻¹ for slow desorption, and 0.00022 h⁻¹ for very slow desorption. These values are in agreement with previous findings for the sediment from lake Ketelmeer and with available literature data on fast, slow, and very slow desorption kinetics.

The results from this study show the similarity of desorption profiles between river Rhine suspended matter, and the top layer sediment from lake Ketelmeer. This indicates that slow and very slow fractions are already present in material forming the top layer of lake Ketelmeer, and were not formed after deposition of this material in the lake. The absence of detectable fast fractions for most compounds could be caused by the absence of recent pollution of the suspended matter. But, the observations may also be explained by a rapid disappearance of compounds from the fast fraction due to a combination of a high affinity of very slow sites for these compounds, and their relatively high volatility.     

Sequential photochemical-biological degradation of chlorophenols

UV/TiO₂/H₂O₂, UV/TiO₂ and UV/H₂O₂ were compared as pre-treatment processes for the detoxification of mixtures of 4-chlorophenol (4CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) prior to their biological treatment. When each chlorophenol was initially supplied at 50 mg l⁻¹, UV/TiO₂/H₂O₂ treatment supported the highest pollutant removal, COD removal, and dechlorination efficiencies followed by UV/TiO₂ and UV/H₂O₂. The remaining toxicity to Lipedium sativum was similar after all pre-treatments. Chlorophenol photodegradation was always well described by a first order model kinetic (r² > 0.94) and the shortest 4CP, DCP, TCP and PCP half-lives of 8.7, 7.1, 4.5 and 3.3 h, respectively, were achieved during UV/TiO₂/H₂O₂ treatment. No pollutant removal was observed in the controls conducted with H₂O₂ or TiO₂ only. Inoculation of all the photochemically pre-treated mixtures with activated sludge microflora was followed by complete removal of the remaining pollutants. Combined UV/TiO₂/H₂O₂-biological supported the highest detoxification, dechlorination (99%) and COD removal (88%) efficiencies. Similar results were achieved when each chlorophenol was supplied at 100 mg l⁻¹. COD and Cl mass balances indicated UV, UV/H₂O₂, and UV/TiO₂ treatments lead to the formation of recalcitrant photoproducts, some of which were chlorinated.     

Comparisons of coarse and fine versions of two carbons for reducing the bioavailabilities of sediment-bound hydrophobic organic contaminants

Coarse (whole) and finely ground Ambersorb 1500 and coarse and fine coconut charcoal were compared as to their efficiencies in scavenging organic contaminants desorbed from sediment. Aqueous slurries of a test sediment spiked (1 ppm) with p,p^′-DDE (DDE), 2,2^′,5,5^′-tetrachlorobiphenyl (TCB), naphthalene (NAP), or phenanthrene (PHEN), and containing 1% levels of the test carbons were treated by shaking at 35 °C while exposed to clusters of low-density polyethylene membrane (detox spiders). Controls consisted of spiked sediments and detox spiders but no added carbon of any kind and thus represented unimpeded bioavailabilities (to the spiders). After the treatments––agitation periods from 2.5 to 60 h, depending on contaminant hydrophobicity––the exposed detox spiders were analyzed. The fine carbon of either type was more effective than its coarser variant in obstructing contaminant bioavailabilities. The finer variants of both carbons obstructed the bioavailabilities of NAP and PHEN equally well as did the coarser variants of both. Whole Ambersorb 1500 and coarse coconut charcoal were similarly ineffective in intercepting TCB and DDE. Ground Ambersorb 1500 obstructed virtually all bioavailability of all four contaminants and was far more effective than fine coconut charcoal in intercepting DDE and TCB. An additional experiment compared the effectiveness of ground Ambersorb 1500 and fine coconut charcoal in obstructing the bioavailabilities from sediment of a broad array of spiked organochlorine pesticides. The performance of ground Ambersorb 1500 was again found to be superior; the bioavailable levels of each of the 27 pesticides were markedly lower in the presence of ground Ambersorb 1500 than in the presence of fine coconut charcoal.