The conspicuity of first-responder safety garments

Introduction

This study compared the conspicuity of three types of first-responder safety garments (NFPA 1971-2007 turnout gear coats, and ANSI/ISEA 107 and 207 safety vests).

Method

Participants drove instrumented vehicles on a closed track during both daytime and nighttime, indicating when they could first detect pedestrians in a simulated emergency response scene. Pedestrians wore one of the safety garments and stood on either side of the emergency scene, facing or perpendicular to oncoming traffic, and either stationary or walking in place.

Results

All three garment standards provided equal levels of conspicuity, in that the distances at which the pedestrians were detected were equivalent. Time of day was a significant factor, with longer mean detection distances being observed in daytime. Pedestrian orientation was significant, with mean detection distances being longest when facing traffic. Pedestrian motion did not result in significant differences in detection distance.

Discussion

The results suggest that all three garment types studied are equivalent in making first responders conspicuous as pedestrians when working an emergency response scene in close proximity to traffic.

Impact on Industry

Whether an NFPA or ANSI/ISEA compliant is worn, first responders are equally likely to be detected by passing motorists, and as such these garments should be considered to be equivalent.     

Bystander injury evaluation of children from midwestern agricultural operations

Background

With more than a million youth living on agricultural operations, it is important for parents to understand the consequences of bystander injuries that children experience in these environments. We identified the childhood injuries for bystander status and compared the severity of these injuries to the working children in the Regional Rural Injury Study-II (RRIS-II).

Methods

RRIS-II followed 16,546 children (∼ 85% of eligible) from rural communities in the Midwest for two six-month recall periods in 1999 and 2001. Demographic, injury, and exposure data were collected through comprehensive computer-assisted telephone interviews. Child injuries were cataloged using narrative scenarios into four categories: (a) directly work-related; (b) indirectly work-related; (c) non-working accomplice; and (d) non-working attendant; the latter three all being bystander categories. Poisson regression modeling was used to calculate rates of bystander injuries. Frequencies were used for comparison of severity measures.

Results

Among the 463 child injuries (aged < 20 yrs), 102 were bystander injuries. Of the bystander-related injuries, 14 were identified as indirectly work-related (working bystanders), 27 as non-working accomplice (passengers/tag-alongs), and 60 as non-working attendant (playing on the operation). The overall rate of bystander injuries was 6.4 per 1,000 people, 95% CI (5.0, 8.1). Males, compared with females, had more than twice the injury rate (8.7; 95% CI 6.4-11.8, and 3.9; 95% CI 2.7-5.7, per 1,000 people, respectively). Bystanders in this population had more severe injuries with 4% having life-threatening circumstances; of these, 4% of the accomplices and 2% of the attendants subsequently died.

Conclusions

Children who live or work on agricultural operations are vulnerable to many hazards. Therefore, this study examined child injuries and found a clear difference in the consequences of these injuries between working-related and bystanding-related injuries.

Impact on Industry

Unlike occupations such as construction and mining, where laws and organizations have been created for the protection of bystanders, agricultural bystanders have remained unprotected and have had to face the consequent injury and death outcomes. As public health professionals considering these risks, it is necessary that we work to develop more intervention studies and continue to propose suggestive guidelines for child safety in these environments so as to challenge family traditions and possibly spark public policies that will give further protection to this population.     

Tracking the prevalence of rollover protective structures on U.S. farm tractors: 1993, 2001, and 2004

Problem

Between 1992 and 2005, 1412 workers on farms died from tractor overturns. A Rollover Protective Structure (ROPS) is a proven intervention to reduce overturn deaths. However, farm characteristics that are associated with the adoption of ROPS are not well understood.

Methods

ROPS prevalence statistics were derived from National Institute for Occupational Safety and Health (NIOSH) surveys that tracked ROPS use on farms. Data were from the years 1993, 2001, and 2004.

Results

In 1993, 38% of tractors were equipped with ROPS. This increased to 51% by 2004. ROPS prevalence rates were higher on farms in the Southern region of the United States, on farms where the operator was 25-34 years old, and on farms with $100,000 or more of farm sales. Low ROPS prevalence rates were associated with farm operators 65 years old or older and with farms with less than $10,000 of farm product sales.

Summary

The increase in ROPS prevalence between 1993 and 2004 has not been sufficient to decrease the rate of tractor overturn deaths on farms. Incentive programs targeting older farm operators and low-income farm operations are suggested to increase ROPS use on tractors.

Impact on Industry

The study provides farm characteristics associated with low ROPS prevalence rates. The results can be used to target farms for future ROPS promotion activities.     

Differences in urban and rural accident characteristics and medical service utilization for traffic fatalities in less-motorized societies

Introduction

Fatalities from traffic accidents in less-motorized societies are an important global issue. We aimed to characterize the geographic differences of fatalities in such societies to facilitate the development of targeted interventions.

Method

This study linked police reports, hospital data, and vital registration data from Taiwan with special reference to accident factors in pre-hospital deaths and medical care in hospital deaths.

Results

A higher percentage of pre-hospital deaths were observed following rural as compared to urban traffic accidents. The deaths due to rural accidents can be attributed to lower use of restraints (i.e., helmets or seat belts), lower percentage of motorcyclists, and more highway accidents. A higher percentage of victims in rural accidents were transported to distant medical centers rather than to local hospitals.

Conclusion

Specific interventions, such as intelligent emergency medical systems, campaigns for helmets and seat belt usage, enforcement of helmets and seat belt use, and speed control measures should be targeted to rural areas.

Impact on industry

Cooperation between the vehicle industry and emergency medical providers in rural traffic accident rescue teams may decrease the numbers of deaths in these regions.     

Re-education of young driving offenders; Effects on self-reports of driver behavior

Introduction

Offending drivers are often re-educated, but these courses have seldom been shown to have any safety effects.

Method

An on-line improvement course for offending drivers below the age of 25 was evaluated with several driver inventories.

Results

The drivers reported higher levels of aggression, stress, sensation seeking, drunk driving, and driving violations, six months after the course than before. However, these levels were lower than those of controls, indicating that the initially low levels for the education group were due to socially desirable responding, as measured by a lie scale, an effect that waned after the course.

Discussion

The results can be interpreted as a positive effect of the education, although this conclusion is tentative and not in agreement with all effects in the data.

Impact on industry

The results are in disagreement with previous evaluation studies using the same or similar instruments, and show the need to include controls for social desirability in self-report studies.     

Evaluation of a healthcare safety climate measurement tool

Problem

Psychometrically validated measurement tools are needed to evaluate an organization's safety climate. In 2000, Gershon and colleagues published a new healthcare safety climate measurement tool to determine its relationship to safe work behavior (Gershon, R., Karkashian, C., Grosch, J., Murphy, L., Escamilla-Cejudo, A., Flanagan, P., et al. (2000). Hospital safety climate and its relationship with safe work practices and workplace exposure incidents. American Journal of Infection Control, 28, 211-21). The present study evaluated the psychometric properties of the Gershon tool when modified to address respiratory rather than bloodborne pathogen exposures.

Method

Medical practitioners, nurses, and nurse aides (n = 460) were surveyed using the modified Gershon tool. Data were analyzed by factor analysis and psychometric properties of the tool evaluated.

Results

Eight safety climate dimensions were extracted from 25 items (Cronbach's alpha range: 0.62 - 0.88). Factor extractions and psychometric properties were reasonably consistent with those of the Gershon tool.

Impact on Industry

The Gershon safety climate tool appears to have sufficient reliability and validity for use by healthcare decision makers as an indicator of employee perceptions of safety in their institution.     

Falls from height during the floor slab formwork of buildings: Current situation in Spain

Problem

One of the phases with the highest risk of falls from a height in the construction of a building is during the floor slab formwork stage. This paper analyzes this particular risk, as well as the most frequently used fall-protection systems.

Method

A survey was carried out to define the current situation in Spain with regard to falls from a height during floor slab formwork and the fall-protection systems used to prevent such a risk.

Results

The results of the survey clarified the current situation in Spain with regard to this risk, and made it clear that there is considerable risk of falling from a height during the floor slab formwork stage.

Discussion

All the safety systems analyzed presented a series of weak points that should be studied in detail before they can be used on building sites.

Impact on industry

The risk of falling associated with floor slab formwork and the most frequently used protection systems are analyzed. As no research had been carried out to date on this type of risk, we consider the research presented in this article to be a pioneer in the field.     

Analysis of bus collision and non-collision incidents using transit ITS and other archived operations data

Introduction

This paper analyzes factors contributing to bus operations safety incidents at TriMet, the transit provider for the Portland Oregon metropolitan region.

Method

The analysis focuses on 4,631 collision and non-collision incidents that occurred between 2006 and 2009. Empirical analysis of these incidents draws on a wide array of operator-level data recovered by transit ITS technologies in combination with information from TriMet's human resources, scheduling, and customer relations databases. Incident frequencies are estimated in relation to operators' demographic characteristics, employment status, assigned work characteristics, service delivery and performance indicators, temporal factors, and customer information.

Results

Apart from identifying factors that are empirically related to the frequency of safety incidents, the findings offer insights into operations policies and practices that hold promise for improving safety.

Impact on Industry

Potential for safety improvement based on analysis of archived operations and human resource data.     

Time trends and predictive factors for safety perceptions among incoming South Australian university students

Problem

Young workers are over-represented in injury statistics. In order to develop injury prevention strategies, this study investigated time trends and predictive factors relating to safety skills, confidence, and attitudes.

Method

Annual surveys were conducted from 2006-2009 among incoming students at the University of Adelaide. The questions addressed safety training, injury experience, and health and safety perceptions.

Results

Time trends in training, perceived safety skills, confidence, and attitudes were not significant. In terms of skills and confidence, the most important correlate was safety training outside of high school (odds ratio = 1.6), especially when repeated, assessed, or in face to face mode. Feeling strongly about safety issues was best predicted by injury experience (OR = 1.7) and gender.

Discussion

These results emphasize the value of assessed training, but they are also consistent with published U.S. data, indicating no improvement over time. It is suggested that there be a more integrated approach in safety education, involving schools and workplaces.

Impact on industry

By developing an understanding of student safety perceptions and experiences, this research aims to target strategies to reduce the excess injury rate for young workers. Workplaces should be more aware of the limitations of school-based safety education and a more integrated and evidence-based approach should be developed, involving schools and workplaces.     

On-road and simulated driving: concurrent and discriminant validation

Introduction

A converging pair of studies investigated the validity of a simulator for measuring driving performance/skill.

Study 1

A concurrent validity study compared novice driver performance during an on-road driving test with their performance on a comparable simulated driving test.

Results

Results showed a reasonable degree of concordance in terms of the distribution of driving errors on-road and errors on the simulator. Moreover, there was a significant relationship between the two when driver performance was rank ordered according to errors, further establishing the relative validity of the simulator. However, specific driving errors on the two tasks were not closely related suggesting that absolute validity could not be established and that overall performance is needed to establish the level of skill.

Study 2

A discriminant validity study compared driving performance on the simulator across three groups of drivers who differ in their level of experience - a group of true beginners who had no driving experience, a group of novice drivers who had completed driver education and had a learner's permit, and a group of fully licensed, experienced drivers.

Results

The findings showed significant differences among the groups in the expected direction -- the various measures of driving errors showed that beginners performed worse than novice drivers and that experienced drivers had the fewest errors. Collectively, the results of the concurrent and discriminant validity studies support the use of the simulator as a valid measure of driving performance for research purposes.

Impact on industry

These findings support the use of a driving simulator as a valid measure of driving performance for research purposes. Future research should continue to examine validity between on-road driving performance and performance on a driving simulator and the use of simulated driving tests in the evaluation of driver education/training programs.     

An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry

Introduction

The Government of the Hong Kong Special Administrative Region (SAR) has implemented different safety initiatives to improve the safety performance of the construction industry over the past decades. The Pay for Safety Scheme (PFSS), which is one of the effective safety measures launched by the government in 1996, has been widely adopted in the public works contracts. Both the accident rate and fatality rate of public sector projects have decreased noticeably over this period.

Method

This paper aims to review the current state of application of PFSS in Hong Kong, and attempts to identify and analyze the perceived benefits of PFSS in construction via an industry-wide empirical questionnaire survey. A total of 145 project participants who have gained abundant handson experience with the PFSS construction projects were requested to complete a survey questionnaire to indicate the relative importance of those benefits identified in relation to PFSS. The perceived benefits were measured and ranked from the perspectives of the client and contractor for crosscomparison.

Results

The survey findings suggested the most significant benefits derived from adopting PFSS were: (a) Increased safety training; (b) Enhanced safety awareness; (c) Encouragement of developing safety management system; and (d) Improved safety commitment. A wider application of PFSS should be advocated so as to achieve better safety performance within the construction industry.

Impact on Industry

It is recommended that a similar scheme to the PFSS currently adopted in Hong Kong may be developed for implementation in other regions or countries for international comparisons.     

Predicting driver drowsiness using vehicle measures: Recent insights and future challenges

Introduction

Driver drowsiness is a significant contributing factor to road crashes. One approach to tackling this issue is to develop technological countermeasures for detecting driver drowsiness, so that a driver can be warned before a crash occurs.

Method

The goal of this review is to assess, given the current state of knowledge, whether vehicle measures can be used to reliably predict drowsiness in real time.

Results

Several behavioral experiments have shown that drowsiness can have a serious impact on driving performance in controlled, experimental settings. However, most of those studies have investigated simple functions of performance (such as standard deviation of lane position) and results are often reported as averages across drivers, and across time.

Conclusions

Further research is necessary to examine more complex functions, as well as individual differences between drivers.

Impact on Industry

A successful countermeasure for predicting driver drowsiness will probably require the setting of multiple criteria, and the use of multiple measures.     

Changes in fall prevention training for apprentice carpenters based on a comprehensive needs assessment

Problem

Falls from heights in residential construction are common, especially among inexperienced workers.

Methods

We conducted a comprehensive needs assessment to determine gaps in the school-based apprentice carpenters' fall prevention training. A team of carpenter instructors and researchers revised the fall prevention training to fill these gaps. Apprentice evaluation and feedback guided ongoing curricular improvements.

Results

Most apprentice carpenters performed work tasks at heights prior to training and fall protection techniques were not commonly used at residential construction sites. Priorities of the revised school-based training included safe ladder habits, truss setting, scaffold use, guarding floor openings, and using personal fall arrest systems. New apprentices were targeted to ensure training prior to exposure at the workplace. We used adult learning principles to emphasize hands-on experiences. A framed portion of a residential construction site was fabricated to practice fall protection behaviors in a realistic setting. The revised curriculum has been delivered consistently and apprentice feedback has been very favorable.

Conclusions

Integration of needs assessment results was invaluable in revising the school-based carpenters apprentice fall prevention curriculum. Working closely with the instructors to tailor learning experiences has provided preliminary positive results.

Impact on Industry

The fall safety of the residential construction industry continues to lag behind commercial construction and industrial settings. The National Occupational Research Agenda includes a Strategic Goal to strengthen and extend the reach of quality training and education in the construction industry via mechanisms such as construction safety and health training needs assessments. This study demonstrates how a structured process can be used to identify and remedy gaps and improve training effectiveness. We encourage others to take steps to assess and increase the impact of training efforts directed at all residential construction professionals; including both union and non-union workers. The implications are even greater in the non-union sector where most U.S. residential work is done.     

Hepatitis B virus infection among health care workers in Public Teaching Hospitals in Khartoum State, Sudan

Background

Hepatitis B virus (HBV) infection is a global public health problem. It is estimated that there are more than 300 million HBV carriers in the world.

Aim

The study aimed to examine the sero-prevalence of hepatitis B virus (HBV) markers among health care workers (HCWs) in Public Teaching Hospitals in Khartoum State, in the year 2004.

Methods

The study is an observational, cross sectional, facility-based study. It was conducted on stratified two-stage cluster random sample of 843 subjects. The study followed non-parametric statistical methods, using Z-test for single proportion.

Results

Among the 843 subjects tested for all HBV markers (Anti-HBc, HBsAg, HBsAb, and HBeAg), the prevalence of Anti-HBc, HBsAg, HBsAb, and HBeAg was found to be 57% (CI 95%:53-60%), 6% (CI 95%:4.0-8.0%), 37% (CI 95%:34-40%) and 9% (CI 95%:7-11%) respectively. P < 0.05.

Conclusion

Seroprevalence of all HBV markers (P < 0.05) was found to be significantly high, while the rate of immunity against HBV infection was low among health care workers In Public Teaching Hospitals in Khartoum State, Sudan.     

Fall arrest characteristics of a scissor lift

Problem

Census of Fatal Occupational Injuries (CFOI) data indicate 306 aerial lift fatalities between 1992-2003. Seventy-eight of these fatalities specifically involved scissor lifts. Members of standards committees have requested that NIOSH conduct research to determine the effects of safety-control practices related to using fall-protection systems for scissor lifts.

Method

This research examined the structural and dynamic stability of a scissor lift subjected to fall arrest forces. This was accomplished by conducting drop tests from a scissor lift. Anchorage locations evaluated included manufacturer-supplied anchorage points on the scissor lift platform as well as mid-rail and top-rail locations.

Results

Preliminary drop tests determined that a 2400 lb maximum arrest force (MAF) could be generated by dropping 169 lb through a fall height of 36” using Nystron® rope as a lanyard. The scissor lift maintained structural and dynamic stability for all drop tests when fully extended and on an incline.

Discussion

Anchoring a fall arrest system to either the mid-rail or top-rail is not a recommended practice by the scissor lift manufacturer. Anchor points are provided on the platform floor of the scissor lift for this purpose. However, our results demonstrate that the mid-rail and top-rail absorb substantial energy from an arrested fall and may have potential as appropriate anchorage points.

Impact to Industry

Employers and workers should consider implementing fall arrest systems when using scissor lifts as part of their overall risk mitigation plan for fall injury prevention.     

Nonfatal bathroom injuries among persons aged ≥15 years--United States, 2008

Problem

Information about where nonfatal unintentional injuries occur is limited, but bathrooms commonly are believed to be a hazardous location.

Methods

Data from a nationally representative sample of hospital emergency departments (ED) was used to quantify and characterize nonfatal unintentional bathroom injuries among people aged ≥ 15 years.

Results

In 2008, an estimated 234,094 nonfatal bathroom injuries were treated in EDs. Most injuries (81.1%) were caused by falls and 37.3% of injuries occurred when bathing, showering, or getting out of the tub or shower. Both injury and hospitalization rates increased with age.

Summary

These results suggest that bathrooms tend to be most hazardous for persons in the oldest age groups.

Impact on Industry

Bathroom injuries among all household members might be reduced by increasing awareness about potentially hazardous activities in the bathroom combined with simple environmental changes such as adding grab bars inside and outside the tub or shower.     

Have government regulations improved workplace safety? : A test of the asynchronous regulatory effects in China's coal industry, 1995-2006

Problem

Empirical studies on the effectiveness of workplace safety regulations are inconclusive. This study hypothesizes that the asynchronous effects of safety regulations occur because regulations need time to become effective. Safety regulations will work initially by reducing the most serious accidents, and later by improving overall safety performance.

Method

The hypothesis is tested by studying a provincial level aggregate panel dataset for China's coal industry using two different models with different sets of dependent variables: a fixed-effects model on mortality rate, which is defined as fatalities per 1,000 employees; and a negative binominal model on the annual number (frequency) of disastrous accidents.

Results

Safety regulations can reduce the frequency of disastrous accidents, but have not reduced mortality rate, which represents overall safety performance.

Discussion and summary

Policy recommendations are made, including shifting production from small to large mines through industrial consolidation, improving the safety performance of large mines, addressing consequences of decentralization, and facilitating the implementation of regulations through carrying on institutional actions and supporting legislation.

Impact on industry

Until recently, about 4,000 coal miners perished annually in China, demonstrating that workplace safety in China's coal industry is an urgent and important issue. This research provides evidence that safety regulations have asynchronous effects and identifies the priorities in improving safety in China's current coal mining. This may assist the Chinese government to design more effective safety improvement policies and improve the effectiveness of safety regulations and safety performance.     

Enhancing older driver safety: A driving survey and evaluation of the CarFit program

Objective

To evaluate CarFit, an educational program designed to promote optimal alignment of driver with vehicle.

Methods

A driving activity survey was sent to 727 randomly selected participants living in retirement communities. Drivers (n = 195) were assigned randomly to CarFit intervention (n = 83, M age = 78.1) or Comparison (n = 112, M age = 79.6) groups. After 6 months, participants completed a post-test of driving activity and CarFit recommendations.

Results

Nonconsenting drivers were older and participated in fewer driving activities. CarFit participation was moderate (71%) with 86% of the participants receiving recommendations. 60% followed the recommendations at the 6-month re-evaluation). The CarFit (67.6%) and Comparison (59.3%) groups reported at least one type of self-regulation of driving activity at baseline. There was no significant change in the driving behaviors at the six-month follow-up.

Conclusion

CarFit was able to detect addressable opportunities that may contribute to the safety of older drivers.

Impact on industry

CarFit recommendations may need stronger reinforcement in order to be enacted by a participant.     

"The little squealer" or "the virtual guardian angel"? Young drivers' and their parents' perspective on using a driver monitoring technology and its implications for parent-young driver communication

Introduction

In-vehicle driving monitoring technologies have the potential to enable young drivers to learn from self-assessment. However, their use is largely dependent on parental involvement.

Method

A total of 79 interviews were conducted with young drivers and parents regarding this technology and its use. Most had the experience of having an in-vehicle data recorder installed in the vehicle driven by the young drivers. Parents and the young drivers expressed both appreciation as well as reservations about its potential as a means to enhance the driving safety of young drivers.

Results

A surprising finding was that some parents did not check the feedback and said they relied on the young driver to do so. Main concerns related to privacy, parent-young driver relationship, self-esteem and confidence, constructive use of the feedback data, and the limitations of the documentation that can be done by the technology.

Conclusions

Providing parents and young drivers with a support system and tools to discuss and utilize the feedback are underscored. Challenges include addressing the invasion of young drivers’ privacy and gender differences, and using the monitoring-capacity of the technology to enhance safe driving practices. Implications for programs to enhance communication and a dialogical approach between parents and young drivers are discussed.     

[Case Study] CityCenter and Cosmopolitan Construction Projects, Las Vegas, Nevada: Lessons learned from the use of multiple sources and mixed methods in a safety needs assessment

Problem

The present study describes a response to eight tragic deaths over an eighteen month times span on a fast track construction project on the largest commercial development project in U.S. history.

Methods

Four versions of a survey were distributed to workers, foremen, superintendents, and senior management. In addition to standard Likert-scale safety climate scale items, an open-ended item was included at the end of the survey.

Results

Safety climate perceptions differed by job level. Specifically, management perceived a more positive safety climate as compared to workers. Content analysis of the open-ended item was used to identify important safety and health concerns which might have been overlooked with the qualitative portion of the survey.

Discussion

The surveys were conducted to understand workforce issues of concern with the aim of improving site safety conditions. Such efforts can require minimal investment of resources and time and result in critical feedback for developing interventions affecting organizational structure, management processes, and communication.

Summary

The most important lesson learned was that gauging differences in perception about site safety can provide critical feedback at all levels of a construction organization.

Impact on the Industry

Implementation of multi-level organizational perception surveys can identify major safety issues of concern. Feedback, if acted upon, can potentially result in fewer injuries and fatal events.