Efficacy of vermicomposting for recycling organic portion of hospital wastes using <Emphasis Type="Italic">Eisenia fetida</Emphasis>: standardization of cow manure proportion to increase enzymatic activities and fungal biomass

Hospital wastes are infectious wastes generated in hospitals and need to be disposed in such a way that they do not spread disease. In this experiment, 5, 10, 15 and 20% cow manure (CM) were mixed with hospital wastes (HW), and mixed wastes were subjected to vermicomposting. In control treatment, only HW was used for vermicomposting. Results suggested that significantly (P ≤ 0.05) higher total nitrogen content was recorded in vermicomposts when 10% or more CM was added to HW. Higher mineralization rate (decrease in C/N ratio) and cellulase activity is probably responsible for rapid organic matter decomposition (loss of total organic carbon). Ergosterol content i.e., total fungal biomass and cellulolytic fungal population were almost constant initially, but increased in the latter stage of vermicomposting. All the vermicompost samples, prepared in this experiment, showed the absence of coliform bacteria. Therefore, it could be concluded that 10% CM addition with HW was the most economical to obtain best quality vermicompost in terms of nutrient content and microbial status.     

Management of biomass residues generated from palm oil mill: Vermicomposting a sustainable option

Solid waste management is one of the challenging problems worldwide and it is becoming more complex by the increase in population and subsequently the waste generated. In Malaysia, among industrial solid waste palm oil mill waste (POMW) contributes the highest share. Wastes from the oil palm mill includes palm oil mill effluent (POME), decanter cake, empty fruit bunches, seed shells and the fibre from mesocarp. Generally most of the waste generated is either disposed of via open dumping or used as fertilizers as such or as animal feed. Land application of POMW and POME is very common practice as it contains numbers of plant nutrients. Direct application of POMW into agricultural soil can result in a number of problems such as water pollution, leaching etc. To deal with these problems, vermicomposting of palm oil mill waste may be a sustainable waste management option.There are number of researches going on management of biomass residues from palm oil mill, but very few works are going on vermicomposting of these agro-industrial waste. Vermicomposting of POMW can be a good practice as it will also be helpful in recycling the useful plant nutrients and it is better than that of composting process. Present review deals with the various aspects of vermicomposting of POMW and its importance. Review also put forward the effect of potential application of vermicompost on plant growth. On the whole it looks for the possibility of vermicomposting of waste from palm oil mill as a sustainable waste management alternative.     

Recycling of spent mushroom compost using earthworms Eisenia foetida and Eisenia andrei

A 90-day study conducted to explore the potential of epigeic earthworms Eisenia foetida and Eisenia andrei to transform the different types of agricultural wastes and spent mushroom compost into value-added product, i.e., vermicompost. Vermicomposting resulted in significant reduction in C:N ratio, pH, electrical conductivity, total organic carbon, TK; and increase in total Kajeldahl nitrogen, TP, and various micro and macronutrients compared to those in the worm feed. Our trials demonstrated that the vermicomposting could be considered as an alternate technology for recycling and environmentally safe disposal/management of the mushroom cultivation complexes’ residues mixed with different types of agricultural waste using epigeic earthworms E. foetida and E. andrei.     

Livestock excreta management through vermicomposting using an epigeic earthworm Eisenia foetida

In India, millions of tones of livestock excreta are produced. Our study explores the potential of an epigeic earthworm Eisenia foetida to compost different livestock excreta (cow, buffalo, horse, donkey, sheep, goat and camel) into value added product (vermicompost) at the laboratory scale. Vermicomposting resulted in lowering of pH, electrical conductivity, potassium and C:N ratio and increase in nitrogen and phosphorus contents. Total K was lower in the final cast than in the initial feed. C:N ratios of the vermicomposts ranged from 16.2 ± 2.17 to 75.4 ± 6.84. Microbial activity measured as dehydrogenase activity in buffalo, donkey and camel wastes increased with time up to day 90. But in sheep and goat wastes, maximum dehydrogenase activity was recorded on day 60 and decreased thereafter. The cocoons and hatchlings production by Eisenia foetida in different excreta were also investigated. The greatest number and biomass of hatchlings was recorded in horse excreta followed by cow, goat and sheep excreta. Thus, cow, horse, sheep and goat excreta show potential as good substrates in vermicomposting using Eisenia foetida, although further research is required to explore the feasibility of use of buffalo, donkey and camel excreta in combination with cow/sheep/goat excreta.     

Microbial biomass governs enzyme activity decay during aging of worm-worked substrates through vermicomposting

Vermicomposting is the biooxidation and stabilization of organic matter involving the joint action of earthworms and microorganisms, thereby turning wastes into a valuable soil amendment called vermicompost. Studies have focused on the changes in the type of substrates available before and after vermicomposting, but little is known on how these changes take place, especially those changes related with maturation of vermicompost. This study investigated the effects of aging on the microbiological properties of fresh vermicompost produced from pig slurry by analyzing the substrate after the earthworms had left it. We incubated 16-wk-old vermicompost and sampled it after 15, 30, 45, and 60 d analyzing microbial biomass and activity (assessed as microbial biomass N and basal respiration respectively) and four enzymatic activities (beta-glucosidase, cellulase, protease, and alkaline phosphatase). Aging of vermicompost resulted in decreases of microbial biomass and activity. Three of the four enzymes analyzed also showed decrease. An initial increase followed by a rapid decrease in alkaline phosphatase was also recorded. High and significant correlations between microbial biomass and beta-glucosidase (r = 0.62, P < 0.001), cellulase (r = 0.56, P < 0.01), and protease (r = 0.82, P < 0.001) were found. Results suggest that there may be two steps involved in the aging dynamics of vermicompost with regards to extracellular enzyme activity; the first step was characterized by a decrease in microbial populations, which resulted in a reduction in the synthesis of new enzymes. The second step was the degradation of the pool of remaining enzymes. This dynamic does not seem to be affected by earthworms because similar decaying patterns of microbial biomass and activity were found in substrate where earthworms were present.     

Land application of biomass residue generated from palm oil processing: its potential benefits and threats

Man’s increased demand for food and better living conditions has led to over exploitation of resources and the consequent generation of enormous amounts of liquid and solid waste materials. This is one of the global challenges for mankind. In Malaysia, palm oil mill waste (POMW) contributes the highest proportion of industrial solid wastes produced yearly. Wastes from the mills include palm oil mill effluent, decanter cake, empty fruit bunches, seed shells and the fibre from the mesocarp. Direct application of POMW into agricultural soil has resulted in a number of problems such as water pollution, leaching. However, with application rates specific for targeted plant species, land application can be employed as a permanent solution to the problem of waste from palm oil mills. This review examines the characteristics of each of the palm oil wastes and their potential for use as a future fertilizer supplement.     

Optimization of activated carbon production from empty fruit bunch fibers in one-step steam pyrolysis for cadmium removal from aqueous solution

The fast growth of the palm oil industry in Malaysia is associated with various waste products, namely the empty fruit bunches (EFB), which have a negative impact on the environment. Therefore, these wastes were utilized as a cheap raw material for the production of activated carbon (AC) with less energy consumption. One-step steam pyrolysis was used to produce AC from oil palm empty fruit bunch fibers (EFBF) by varying the operating parameters of temperature, steam flow rate, and activation time using two-level full factorial experimental design (FFD). Ten samples of AC were prepared and the optimized production conditions were chosen based on the ability to adsorb and remove cadmium. Physical activation comprised of carbonization for 30 min using nitrogen gas (N₂), followed by activation with steam at different flow rates (2.0, 3.0, and 4.0 ml/min), temperatures (600, 750, and 900°C) and times (15, 30, and 45 min). The AC sample produced at an activation temperature of 900°C with a steam flow rate of 2.0 ml/min and activation time of 15 min was selected as the best adsorbent with a total yield of 21.7%. It had adsorbed more than 97% of total cadmium from aqueous solution within 2 min of the contact time. Characterization of EFBF-based AC by SEM and BET surface area analysis had shown a good-quality adsorbent with highly active sites and well-developed pores with BET surface area of 635.16 m²/g. Experimental results indicated that the prepared AC from EFBF provide a promising solution in water and wastewater treatment.     

Investigating efficiency of <Emphasis Type="Italic">Lampito mauritii</Emphasis> (Kinberg) and <Emphasis Type="Italic">Perionyx ceylanensis</Emphasis> Michaelsen for vermicomposting of different types of organic substrates

The vermicomposting ability of Lampito mauritii (Kinberg) and Perionyx ceylanensis Michaelsen was evaluated by using three different types of organic substrates such as leaf litter of Polyalthia longifolia, Pennisetum typhoides cobs (pearl millet) and a weed, Rottboellia exaltata (whole plant except the roots) in combination with cowdung (1:1). Vermicomposting studies (120 days) conducted to optimize the number of worms required for efficient conversion based on the reduction of C/N ratio, percentage decomposition of organic substrates, total number and biomass of earthworms recovered from the vermibed substrates clearly showed that vermibeds with 4 kg of organic materials can hold about 60–80 L. mauritii and about 90–120 P. ceylanensis for efficient decomposition. The percentage decomposition of each organic substrate treated with different numbers of L. mauritii (20, 40, 60, 80 and 100 earthworms) and P. ceylanensis (30, 60, 90, 120 and 150) showed significant difference (P < 0.001) between numbers of worms introduced per vermibed but the difference between substrates was not significant within the treatments. Vermicomposting resulted in significant increase in electrical conductivity (28.54–49.82%), total nitrogen (43.96–90.83%), total phosphorus (27.42–68.10%) and total potassium (27.42–113.18%), whereas decrease in organic carbon (35.05–49.74%), C/N ratio (55.48–73.18%) and C/P ratio (50.46–66.90%) in different vermibeds introduced with L. mauritii and P. ceylanensis. Both the earthworm species can be used for vermicomposting different organic substrates; however, duration of vermicomposting with P. ceylanensis is not as much of L. mauritii. The use of L. mauritii for vermicomposting of other substrates has been well established by other workers also but standardization of P. ceylanensis, a locally available species, for vermicomposting of different organic substrates is a new finding and the species could be useful for vermiconversion of organic substrates under local conditions.     

Vermicomposting: A sustainable tool for environmental equilibria

Improperly managed organic waste constitutes a serious environment threat across the globe. This has led to a worldwide struggle to strike a balance between the rapid generation of such wastes and protection of the environment. With the unique advantages of lower operational and maintenance costs compared with other waste management technologies, the use of vermicomposting to manage organic wastes has been increasing rapidly in recent years. Still, some factors (e.g., characteristics of substrate composition before and after treatment) are in need of additional, specific studies so that researchers can better understand the metabolism involved in the process. Vermicomposting provides employment opportunities as it protects the environment, augmenting crop productivity when it is used as a fertilizer supplement and helping to maintain ecological balance. Thus, vermicompost plays an important role in the circular economy. This article provides an overview of the research activities that have been conducted on the use of vermicomposts to remove pollutants from the soil, in wastewater treatment, and in organic waste recycling throughout the world. Circular economic assessment has revealed that vermicomposting technology is usually feasible except in certain cases. Most other methods of waste disposal lead to soil deterioration, toxic effects, and increased pollution affecting land, air, water, and living beings, in addition to the sometimes considerable expense of their implementation. Thus, an eco‐friendly method that removes waste in one step is needed. Determining the long‐term performance and sustainable operation of vermicomposting systems still poses a challenge, however, as treatment performance is affected by design parameters, operational conditions, and environmental factors. This article summarizes the factors influencing pollutant removal through the vermicomposting process. Finally, this article highlights additional research that should be conducted on these issues to improve the performance of vermicomposting.     

Bioremediation of aerobically treated distillery sludge mixed with cow dung by using an epigeic earthworm Eisenia fetida

The potential of the epigeic earthworm Eisenia fetida to stabilize sludge␣(generated from a distillation unit of the sugar industry) mixed with cow dung, in different proportions i.e. 20% (T₁), 40% (T₂), 60% (T₃) and 80% (T₄) has been studied under laboratory conditions for 90 days. The␣ready vermicompost was evaluated for its’ different physico-chemical parameters using standard methods. At the end of experiment, all vermibeds expressed a significant decrease in pH (7.8–19.2%) organic C (8.5–25.8%) content, and an increase in total N (130.4–170.7%), available P (22.2–120.8%), exchangeable K (104.9–159.5%), exchangeable Ca (49.1–118.1%), and exchangeable Mg (13.6–51.2%) content. Overall, earthworms could maximize decomposition and mineralization efficiency in bedding with lower proportions of distillery sludge. DTPA extractable metal reduction in substrate was recorded between the ranges of 12.5–38.8% for Zn, 5.9–30.4% for Fe, 4.7–38.2% for Mn and 4.5–42.1% for Cu. Maximum values for the mean individual live weight (809.69 ± 20.09 mg) and maximum individual growth rate (mg wt. worm⁻¹ day⁻¹) (5.81 ± 0.18) of earthworms was noted in T₁ treatment, whereas cocoon numbers (69.0 ± 7.94) and individual reproduction rate (cocoon worm⁻¹ day⁻¹) (0.046 ± 0.002) was highest in T₂ treatment. Earthworm mortality tended to increase with increasing proportion of distillery sludge, and maximum mortality in E. fetida was recorded for the T₄ (45.0 ± 5.0) treatment. Results indicate that vermicomposting might be useful for managing the energy and nutrient rich distillery sludge on a low-input basis. Products of this process can be used for sustainable land restoration practices. The feasibility of worms to mitigate the toxicity of metals also reduces the possibility of soil contamination, which has been reported in earlier studies during direct field application of industrial wastes.     

Energy balances,greenhouse gas emissions and economics of biochar production from palm oil empty fruit bunches

This paper presents results from a gate-to-gate analysis of the energy balance, greenhouse gas (GHG) emissions and economic efficiency of biochar production from palm oil empty fruit bunches (EFB). The analysis is based on data obtained from EFB combustion in a slow pyrolysis plant in Selangor, Malaysia. The outputs of the slow pyrolysis plant are biochar, syngas, bio-oil and water vapor. The net energy yield of the biochar produced in the Selangor plant is 11.47 MJ kg⁻¹ EFB. The energy content of the biochar produced is higher than the energy required for producing the biochar, i.e. the energy balance of biochar production is positive. The combustion of EFB using diesel fuel has the largest energy demand of 2.31 MJ kg⁻¹ EFB in the pyrolysis process. Comparatively smaller amounts of energy are required as electricity (0.39 MJ kg⁻¹ EFB) and for transportation of biochar to the warehouse and the field (0.13 MJ kg⁻¹ EFB). The net greenhouse gas emissions of the studied biochar production account for 0.046 kg CO₂-equiv. kg⁻¹ EFB yr⁻¹ without considering fertilizer substitution effects and carbon accumulation from biochar in the soil. The studied biochar production is profitable where biochar can be sold for at least 533 US-$ t⁻¹. Potential measures for improvement are discussed, including higher productivity of biochar production, reduced energy consumption and efficient use of the byproducts from the slow pyrolysis.     

Biomass as the Renewable Energy Sources in Malaysia: An Overview

Past and current economic growths of Malaysia have been primarily energized by fossil fuels. Malaysia has very substantial potential for biomass energy utilization given its equatorial climate that is ideal for dense tropical forest growth and agricultural vegetation. There are five major sectors contributing wastes to biomass energy in Malaysia: forestry (wood products), rubber cultivation, cocoa cultivation, sugar cane cultivation and oil palm cultivation. Biomass in Malaysia contributes about 14% of the approximately 340 million barrel of oil equivalent (boe) of energy used every year. This paper provides an overview on the types of biomass being used, the research works on biomass conversion into energy and the present biomass energy projects in Malaysia.     

Production of vermifertilizer from guar gum industrial wastes by using composting earthworm <Emphasis Type="Italic">Perionyx sansibaricus</Emphasis> (Perrier)

Efforts have been made to convert the guar gum industrial waste into a value-added product, by employing a new earthworm species for vermicomposting e.g. Perionyx sansibaricus (Perrier) (Megascolecidae), under laboratory conditions. Industrial lignocellulosic waste was amended with other organic supplements (saw dust and cow dung); and three types of vermibeds were prepared: guar gum industrial waste + cow dung + saw dust in 40: 30: 30 ratio (T₁), guar gum industrial waste + cow dung + saw dust in 60: 20: 20 ratio (T_2,), and guar gum industrial waste + cow dung + saw dust in 75: 15: 10 ratio (T₃). As compared to initial concentrations, vermicomposts exhibited a decrease in organic C content (5.0–11.3%) and C:N ratio (11.1–24.4%) and an increase in total N (18.4–22.8%), available P (39.7–92.4%), and exchangeable K (9.4–19.7%) contents, after 150 days of vermicomposting. A vermicomposting coefficient (VC) was used to compare of vermicomposting with the experimental control (composting). P. sansibaricus exhibited maximum value of mean individual live weight (742.8 ± 21.1 mg), biomass gain (442.94 ± 21.8 mg), growth rate (2.95 ± 0.15 mg day⁻¹), cocoon numbers (96.0 ± 5.1) and reproduction rate (cocoons worm⁻¹ day⁻¹) (0.034 ± 0.001) in T₂ treatment. In T₃ maximum mortality (30.0 ± 4.01 %) in earthworm population was observed. Overall, T₂ vermibed appeared as an ideal substrate to manage guar gum industrial waste effectively. Vermicomposting can be proposed as a low-input basis technology to convert industrial waste into value-added biofertilizer.     

Enrichment of vermicomposts prepared from cow dung spiked solid textile mill sludge using nitrogen fixing and phosphate solubilizing bacteria

Textile mill waste can be vermicomposted if it is mixed in the range of 20–30% with cow dung. This article reports the effect of inoculation, of nitrogen fixing Azotobacter chroococcum strain; Azospirillum brasilense strain and phosphate solubilizing Pseudomonas maltophila, on nitrogen and phosphorus content of vermicomposts prepared from cow dung (CD) and cow dung spiked textile mill sludge (CD + STMS). The CD vermicompost was more supportive to the growth and multiplication of all the three bacteria than CD + STMS vermicompost. In Azotobacter chroococcum treated vermicomposts maximum nitrogen content was recorded between 45 and 60 days [CD␣vermicompost (25.9 ± 0.45 g kg⁻¹) and CD + STMS vermicompost (20.6 ± 0.62 g kg⁻¹)] followed by Azospirillum brasilense inoculation [CD vermicompost (19.4 ± 0.60 g kg⁻¹) and CD + STMS vermicompost (18.6 ± 0.17 g kg⁻¹)]. Phosphorus content in Pseudomonas maltophila inoculated CD vermicompost was 20.8 ± 0.20 g kg⁻¹ and CD + STMS vermicompost was 13.4 ± 0.45 g kg⁻¹ after 75th day of inoculation.     

Comparison of heavy metals content in compost against vermicompost of organic solid waste: Past and present

Disposal of the municipal organic solid waste is a serious problem worldwide. Composting is one of the most preferred methods of solid waste management practice, principally due to the high percentage of organic material in the waste composition. Composting has advantages over land-filling and incineration in Mauritius because of lower operational costs, less environmental pollution, beneficial use of the end product, high humidity and organic content of household waste. Vermicomposting is a comparatively enhanced method in composting, and involves the stabilization of organic solid waste through earthworm consumption that converts the waste into earthworm castings. In both composting and vermicomposting processes, the presence of heavy metals and different toxics substances limits its land use without processing. The production and application of compost potentially contaminate the environment with heavy metals. There is a high-degree of consensus in the past and present literatures that composting increases metal concentrations but whether similar changes in metal concentration and availability occur during vermicomposting has not been fully resolved. This review deals with various total metal contents present in composting compared to that present in vermicomposting of organic solid wastes from past and present years.     

Optimizing process parameters of palm oil bleaching on locally prepared animal bone–based activated carbon using response surface methodology

Adsorptive bleaching potentials of activated animal bone on palm oil was investigated. Palm oil was obtained locally from the mesocarp of oil palm fruits. The obtained palm oil was degummed, neutralized, and subjected to proximate analysis before bleaching. The animal bone–based activated carbon used as a bleaching material was locally prepared by cleaning, drying, carbonization, and chemical activation process. The prepared activated carbon (CBAC) was characterized using Fourier transform infrared, scanning electron microscopy, Braummer–Emmett–Teller, and x‐ray diffraction (XRD) methods. Bleaching of the prepared palm oil on CBAC was done at different process conditions. The characterization results of BET analysis show that CBAC has a surface area of 593.270 m²/g, micropore surface area 595.56 m²/g, micropore volume 0.212 cm³/g, Langmuir surface area 1.38e+04 m²/g, and adsorption energy 3.998 KJ/mol. XRD analysis indicates gypsum as the dominant mineral in the activated carbon sample. The CBAC efficiency of 75.14% was obtained for time/temperature interactions at 50 min/120°C while at 25 g/50 min dosage/time interactions an efficiency of 75.17% was obtained.     

Industry to Industry By-products Exchange Network towards zero waste in palm oil refining processes

This paper presents a systematic framework for optimal utilization of by-products generated during crude palm oil refining processes. Three by-products are considered in the supply chain network: soapstock, palm fatty acid distillate (PFAD) and spent bleaching earth (SBE). These by-products, generated from neutralization, deodorization and bleaching processes, are viable feedstocks to other commercial industries such as animal feed, biodiesel, lubricant and soap. The case study is formulated as Mixed Integer Linear Programming (MILP) and integrated into the framework with the objective to maximize the refinery's profit as well as moving towards a conscious mindset of zero waste. This is the first time that such framework is developed and applied for the palm oil industry. The framework is called as Industry to Industry By-products Exchange Network (I2IBEN). An illustrative case study demonstrates a significant potential profit of MYR182, 893 per month.     

Effect of stocking density and food quality on the growth and fecundity of an epigeic earthworm (<Emphasis Type="Italic">Eisenia fetida</Emphasis>) during vermicomposting

Physico-chemical characteristics of the feed and optimum worm density are important parameters for the efficient working of a vermicomposting system. Overcrowding of worms can affect the efficiency of a vermicomposting system even if all other parameters have been optimized. This article reports the effect of stocking density and feed quality on the growth and fecundity of Eisenia fetida under laboratory conditions. The feed mixtures contained cow dung and textile mill wastewater sludge in different ratios. Three feed mixtures and five stocking rates (1, 2, 4, 8, and 12) were tested for 12 weeks. The results showed that E. fetida growth rate was faster at higher stocking densities; however, biomass gain per worm was faster at lower stocking densities. Sexual maturity was attained earlier at higher stocking densities. Growth rate was highest in 100% cow dung at all the stocking densities when compared to textile mill wastewater sludge containing feed mixtures. A worm population of 27–53 worms per kg of feed was found to be the most favorable stocking density.     

Pollution control technologies for the treatment of palm oil mill effluent (POME) through end-of-pipe processes

Palm oil production is one of the major industries in Malaysia and this country ranks one of the largest productions in the world. In Malaysia, the total production of crude palm oil in 2008 was 17,734,441 tonnes. However, the production of this amount of crude palm oil results in even larger amounts of palm oil mill effluent (POME). In the year 2008 alone, at least 44 million tonnes of POME was generated in Malaysia. Currently, the ponding system is the most common treatment method for POME but other processes such as aerobic and anaerobic digestion, physicochemical treatment and membrane filtration may also provide the palm oil industries with possible insights into the improvement of POME treatment processes. Generally, open ponding offers low capital and operating costs but this conventional method is becoming less attractive because the methane produced is wasted to the atmosphere and the system can not be certified for Carbon Emission Reduction trading. On the other hand, anaerobic digestion of POME provides the fastest payback of investment because the treatment enables biogas recovery for heat generation and treated effluent for land application. Lastly, it is proposed herewith that wastewater management based on the promotion of cleaner production and environmentally sound biotechnologies should be prioritized and included as a part of the POME management in Malaysia for attaining sustainable development. This paper thus discusses and compares state-of-the-art POME treatment methods as well as their individual performances.     

Magnetic composite prepared from palm shell-based carbon and application for recovery of residual oil from POME

Magnetic separation combined with adsorption by activated carbon has been found to be a useful method for removing pollutants. In this paper, the use of palm shell as a source of activated carbon for the removal and recovery of oil from palm oil mill effluent (POME) is studied. In the first part of the study, the properties of samples of activated carbon prepared from palm shell under a variety of different conditions were characterized for their hydrophobicity, surface areas and pore size distribution. The most effective of the activated carbon samples was prepared by impregnation with ZnCl(2) followed by combined physical/chemical activation under carbon dioxide flow at 800 °C. Four grams of these samples adsorbed 90% of the oil from 50 mL POME. In the second part, the palm shell-based carbon samples were given magnetic properties by the technique of iron oxide deposition. Ninety-four percent of the activated carbon/iron oxide composite containing the adsorbed oil could be extracted from the POME by a magnetic bar of 0.15 T. Four grams of the composite can remove 85% of oil from 50 mL POME and a total of 67% of the initial oil can then be recovered by hexane extraction. Powder X-ray diffractometry showed the presence of magnetite and maghemite in the activated carbon/iron oxide composite.