Management of biomass residues generated from palm oil mill: Vermicomposting a sustainable option

Solid waste management is one of the challenging problems worldwide and it is becoming more complex by the increase in population and subsequently the waste generated. In Malaysia, among industrial solid waste palm oil mill waste (POMW) contributes the highest share. Wastes from the oil palm mill includes palm oil mill effluent (POME), decanter cake, empty fruit bunches, seed shells and the fibre from mesocarp. Generally most of the waste generated is either disposed of via open dumping or used as fertilizers as such or as animal feed. Land application of POMW and POME is very common practice as it contains numbers of plant nutrients. Direct application of POMW into agricultural soil can result in a number of problems such as water pollution, leaching etc. To deal with these problems, vermicomposting of palm oil mill waste may be a sustainable waste management option.There are number of researches going on management of biomass residues from palm oil mill, but very few works are going on vermicomposting of these agro-industrial waste. Vermicomposting of POMW can be a good practice as it will also be helpful in recycling the useful plant nutrients and it is better than that of composting process. Present review deals with the various aspects of vermicomposting of POMW and its importance. Review also put forward the effect of potential application of vermicompost on plant growth. On the whole it looks for the possibility of vermicomposting of waste from palm oil mill as a sustainable waste management alternative.     

Pyrolysis Investigation For Bio-Oil Production From Various Biomass Feedstocks In Thailand

This study investigated the bio-oil production from vacuum pyrolysis of potential biomass feedstocks in Thailand. Experiments were carried out on palm empty fruit bunch, rice straw, rice husk, eucalyptus wood, rubber wood (Hevea Brasiliensis), and Teng wood (Shorea Obtuse) in a lab-scale-fixed bed reactor. The results showed that the product distribution was strongly dependent on temperature and biomass properties. Maximum oil yields, i.e., 50–60 wt %, were reached at 450–550°C. Due to mild temperature, most of alkalis originally present in biomass concentrated in product char, and only traces were detected in oil. Two-third of energy in biomass was in the product oil.     

The supply and demand outlook for energy in the Asia—Pacific region

Years of strong economic growth in the Asia—Pacific region have resulted in unprecedented increases in energy demand in the region, particularly for oil and gas. The supply of oil and gas to the region will become more problematic as the decade progresses. Already 50% dependent on imported oil, this figure will rise to nearly 65% by 2000. Because high rates of domestic oil demand growth among traditional petroleum exporters - Indonesia. China and Malaysia - will absorb exportable surpluses, the region will find itself dependent on the Middle East for at least 90% of its imported oil needs by 2000. Currently linked to oil, LNG prices cannot justify the investments needed to bring new greenfield projects on line. With demand expected to exceed 67 million tonnes (Mt) in 2000 and 100 Mt in 2010. over 50 Mt of new capacity will be needed; satisfying this demand will necessitate a new pricing structure for LNG, raising the price substantially above the relative price of crude oil.     

Pollution control technologies for the treatment of palm oil mill effluent (POME) through end-of-pipe processes

Palm oil production is one of the major industries in Malaysia and this country ranks one of the largest productions in the world. In Malaysia, the total production of crude palm oil in 2008 was 17,734,441 tonnes. However, the production of this amount of crude palm oil results in even larger amounts of palm oil mill effluent (POME). In the year 2008 alone, at least 44 million tonnes of POME was generated in Malaysia. Currently, the ponding system is the most common treatment method for POME but other processes such as aerobic and anaerobic digestion, physicochemical treatment and membrane filtration may also provide the palm oil industries with possible insights into the improvement of POME treatment processes. Generally, open ponding offers low capital and operating costs but this conventional method is becoming less attractive because the methane produced is wasted to the atmosphere and the system can not be certified for Carbon Emission Reduction trading. On the other hand, anaerobic digestion of POME provides the fastest payback of investment because the treatment enables biogas recovery for heat generation and treated effluent for land application. Lastly, it is proposed herewith that wastewater management based on the promotion of cleaner production and environmentally sound biotechnologies should be prioritized and included as a part of the POME management in Malaysia for attaining sustainable development. This paper thus discusses and compares state-of-the-art POME treatment methods as well as their individual performances.     

生物质环保能源产业链发展探讨

简述了生物质概念及生物质利用技术的概况,介绍了生物质(竹、木剩余物)气、炭、液、油四联产生物质能源利用产业链的发展思路,对生物质利用的市场应用及发展进行了分析预测。     

A Site-Related Suitability Analysis for the Production of Biomass as a Contribution to Sustainable Regional Land-Use

The use of renewable energy in Europe offers the possibility of reducing greenhouse gas emissions, and contributes to energy security and independence. With the reform of the Common Agricultural Policy (CAP) and a variety of recently introduced national directives supporting renewable energy sources in the European Union, the economic attractiveness of bioenergy production has distinctly increased. This article combines an economic evaluation of biomass production with site-related natural conditions of the Havelland region, situated in the north-east area of Germany. Two methods for evaluating site-specific potential biomass yields were compared. For three example biomass crops, evaluations of yield estimations at agricultural lots for site-optimized suitability (SOS) and conventional suitability (CS) were carried out. Both modelling approaches were compared. The results of the GIS modelling indicate that the financial support for increasing the use of renewable energy with the German feed-in system, called Erneuerbare-Energien-Gesetz (EEG), will possibly lead to an increased cultivation of crops with high biomass output. This monocultural orientation of farming practices and the negative effects on the ecosystem could act in opposition to other environmental initiatives of the EU. The outputs of the SOS analysis show that high biomass production could be integrated into environmental policy proposals. Therefore, new EU policy should take modified subsidies into consideration in order to avoid developing conflicts between small-scale changes in landscape ecosystems caused by large-scale transformations in energy policy.     

植物油燃料研究概述

本文介绍了植物油作燃料的研究历史以及试验研究状况，表明植物油作为柴油的替代品是最易实现的方案。但植物油燃料还需进一步试验研究才能使其实用化，其技术储备具有深远的现实意义。本文还通过对燃料油植物栽培问题的探讨，认为“农林复合经营”是生产植物燃料油的重要途径。     

Large-scale utilization of biomass energy and carbon dioxide capture and storage in the transport and electricity sectors under stringent CO2 concentration limit scenarios

Large-scale, dedicated commercial biomass energy systems are a potentially large contributor to meeting global climate policy targets by the end of the century. We use an integrated assessment model of energy and agriculture systems to show that, given a climate policy in which terrestrial carbon is appropriately valued equally with carbon emitted from the energy system, biomass energy has the potential to be a major component of achieving these low concentration targets. A key aspect of the research presented here is that the costs of processing and transporting biomass energy at much larger scales than current experience are explicitly incorporated into the modeling. From the scenario results, 120–160 EJ/year of biomass energy is produced globally by midcentury and 200–250 EJ/year by the end of this century. In the first half of the century, much of this biomass is from agricultural and forest residues, but after 2050 dedicated cellulosic biomass crops become the majority source, along with growing utilization of waste-to-energy. The ability to draw on a diverse set of biomass-based feedstocks helps to reduce the pressure for drastic large-scale changes in land use and the attendant environmental, ecological, and economic consequences those changes would unleash. In terms of the conversion of bioenergy feedstocks into value added energy, this paper demonstrates that biomass is and will continue to be used to generate electricity as well as liquid transportation fuels. A particular focus of this paper is to show how climate policies and technology assumptions – especially the availability of carbon dioxide capture and storage (CCS) technologies – affect the decisions made about where the biomass is used in the energy system. The potential for net-negative electric sector emissions through the use of CCS with biomass feedstocks provides an attractive part of the solution for meeting stringent emissions constraints; we find that at carbon prices above $150/tCO₂, over 90% of biomass in the energy system is used in combination with CCS. Despite the higher technology costs of CCS, it is a very important tool in controlling the cost of meeting a target, offsetting the venting of CO₂ from sectors of the energy system that may be more expensive to mitigate, such as oil use in transportation. CCS is also used heavily with other fuels such as coal and natural gas, and by 2095 a total of 1530 GtCO₂ has been stored in deep geologic reservoirs. The paper also discusses the role of cellulosic ethanol and Fischer–Tropsch biomass derived transportation fuels as two representative conversion processes and shows that both technologies may be important contributors to liquid fuels production, with unique costs and emissions characteristics.     

Biomass use in chemical and mechanical pulping with biomass-based energy supply

The pulp and paper industry is energy intensive and consumes large amounts of wood. Biomass is a limited resource and its efficient use is therefore important. In this study, the total amount of biomass used for pulp and for energy is estimated for the production of several woodfree (containing only chemical pulp) and mechanical (containing mechanical pulp) printing paper products, under Swedish conditions. Chemical pulp mills today are largely self-sufficient in energy while mechanical pulp mills depend on large amounts of external electricity. Technically, all energy used in pulp- and papermaking can be biomass based. Here, we assume that all energy used, including external electricity and motor fuels, is based on forest biomass. The whole cradle-to-gate chain is included in the analyses. The results indicate that the total amount of biomass required per tonne paper is slightly lower for woodfree than for mechanical paper. For the biomass use per paper area, the paper grammage is decisive. If the grammage can be lowered by increasing the proportion of mechanical pulp, this may lower the biomass use per paper area, despite the higher biomass use per unit mass in mechanical paper. In the production of woodfree paper, energy recovery from residues in the mill accounts for most of the biomass use, while external electricity production accounts for the largest part for mechanical paper. Motor fuel production accounts for 5–7% of the biomass use. The biomass contained in the final paper product is 21–42% of the total biomass use, indicating that waste paper recovery is important. The biomass use was found to be about 15–17% lower for modelled, modern mills compared with mills representative of today's average technology.     

Effects of palm oil mill effluent media on cell growth and lipid content of Nannochloropsis oculata and Tetraselmis suecica

In this study, palm oil mill effluent (POME) was used as an alternative medium for algal biomass and lipid production. The influence of different concentrations of filtered and centrifuged POME in sea water (1, 5, 10 and 15%) on microalgal cell growth and lipid yield were investigated. Both Nannochloropsis oculata and Tetraselmis suecica had enhanced cell growth and lipid accumulation at 10% POME with maximum specific growth rate (0.21 d^–1 and 0.20 d^–1) and lipid content (39.1 ± 0.73% and 27.0 ± 0.61%), respectively, after 16 days of flask cultivation. The total Saturated Fatty Acid (SFA) (59.24%, 68.74%); Monounsaturated Fatty Acid (MUFA) (15.14%, 12.26%); and Polyunsaturated Fatty Acid (PUFA) (9.07%, 8.88%) were obtained for N. oculata and T. suecica, respectively, at 10% POME. Algal cultivation with POME media also enhanced the removal of Chemical Oxygen Demand (COD) (93.6–95%), Biological Oxygen Demand (BOD) (96–97%), Total Organic Compound (TOC) (71–75%), Total Nitrogen (TN) (78.8–90.8%) and oil and grease (92–94.9%) from POME.     

A comparison of on-site nutrient and energy recycling technologies in algal oil production

Research on biofuel production pathways from algae continues because among other potential advantages they avoid key consequential effects of terrestrial oil crops, such as competition for cropland. However, the economics, energetic balance, and climate change emissions from algal biofuels pathways do not always show great potential, due in part to high fertilizer demand. Nutrient recycling from algal biomass residue is likely to be essential for reducing the environmental impacts and cost associated with algae-derived fuels. After a review of available technologies, anaerobic digestion (AD) and hydrothermal liquefaction (HTL) were selected and compared on their nutrient recycling and energy recovery potential for lipid-extracted algal biomass using the microalgae strain Scenedesmus dimorphus. For 1 kg (dry weight) of algae cultivated in an open raceway pond, 40.7 g N and 3.8 g P can be recycled through AD, while 26.0 g N and 6.8 g P can be recycled through HTL. In terms of energy production, 2.49 MJ heat and 2.61 MJ electricity are generated from AD biogas combustion to meet production system demands, while 3.30 MJ heat and 0.95 MJ electricity from HTL products are generated and used within the production system.Assuming recycled nutrient products from AD or HTL technologies displace demand for synthetic fertilizers, and energy products displace natural gas and electricity, the life cycle greenhouse gas reduction achieved by adding AD to the simulated algal oil production system is between 622 and 808 g carbon dioxide equivalent (CO₂e)/kg biomass depending on substitution assumptions, while the life cycle GHG reduction achieved by HTL is between 513 and 535 g CO₂e/kg biomass depending on substitution assumptions. Based on the effectiveness of nutrient recycling and energy recovery, as well as technology maturity, AD appears to perform better than HTL as a nutrient and energy recycling technology in algae oil production systems.     

Processing of Straw/Corn Stover: Comparison of Life Cycle Emissions

The LCA emissions from four renewable energy routes that convert straw/corn stover into usable energy are examined. The conversion options studied are ethanol by fermentation, syndiesel by oxygen gasification followed by Fischer Tropsch synthesis, and electricity by either direct combustion or biomass integrated gasification and combined cycle (BIGCC). The greenhouse gas (GHG) emissions of these four options are evaluated, drawing on a range of studies, and compared to the conventional technology they would replace in a western North American setting. The net avoided GHG emissions for the four energy conversion processes calculated relative to a “business as usual” case are 830 g CO₂e/kWh for direct combustion, 839 g CO₂e/kWh for BIGCC, 2,060 g CO₂e/L for ethanol production, and 2,440 g CO₂e/L for FT synthesis of syndiesel. The largest impact on avoided emissions arises from substitution of biomass for fossil fuel. Relative to this, the impact of emissions from processing of fossil fuel, e.g., refining of oil to produce gasoline or diesel, and processing of biomass to produce electricity or transportation fuels, is minor.     

External benefits of environmental regulation: Resource recovery and the utilisation of effluents

Summary Since 1977, stringent environmental regulation has been progressively imposed on Malaysia's most polluting industry, the palm oil mills. The impact of the regulation on international trade and producer welfare has been quite small compared to the relative benefits to society in terms of changes in the levels of dissolved oxygen in the industrial effluents. External benefits from pollution abatement have been derived. This paper presents a preliminary evaluation of the derived benefits which have a long- term potential of recycling valuable resources while maintaining competitiveness in the international palm oil trade.Dr Khalid Abdul Rahim is a member of faculty in the Department of Natural Resource Economics at the Universiti Pertanian Malaysia. Wan Mustafa Wan Ali is a research assistant in the Department. This paper is based on part of the "Intensification of Research in Priority Areas" (IRPA) project 1991–95, funded by the Government of Malaysia.     

Basis of energy crop selection for biofuel production: Cellulose vs. lignin

This paper investigates the suitability of Jerusalem artichoke (Helianthus tuberosus L.), fiber hemp (Cannabis sativa L.), energy sunflower (Helianthus annuus L.), Amur silver-grass (Miscanthus sacchariflorus), and energy grass cultivar (cv) Szarvasi-1 for biofuel production in Northern climatic conditions. Above ground biomass, bioethanol production yield, and methane production yield are used as indicators to assess the bio-energy potential of the culture. Results presented show that energy crops of Southern origin produce 30–70% less biomass than in the origin region. Nonetheless, both perennial and annual energy crops produce high above ground biomass yields (660–1280 g m^–2) for Northern climatic conditions. Experimental results show that bioethanol yield is dependent on cellulose content of the biomass. The higher the cellulose content, the higher the bioethanol yield. The biogas production on the other hand, depends on lignin content. The lower the lignin content the higher the biogas yield. Therefore, the selection of the energy crop for bioethanol production should be based on high cellulose content, while for biogas production it should rather be based on the low lignin content.     

Techno-economic and environmental assessment of an olive stone based biorefinery

Olive tree cultivation is spreading worldwide as a consequence of beneficial effects of olive oil consumption. Olive oil production process and table olive industries are the major sources of olive stones. Currently, this by-product is used in direct combustion to produce energy as electricity or heat. However, there are other possibilities for taking full advantage of a renewable source of interesting compounds. In this work the techno-economic and environmental assessment of two biorefinery schemes and its comparison with the direct combustion (base case) of this residue are presented. The first biorefinery scheme describes the integrated production of xylitol, furfural, ethanol and poly-3-hydroxybutyrate (PHB). The second biorefinery scheme considers the production of xylitol, furfural, ethanol and PHB integrated to a cogeneration system for producing bioenergy from the solid residues resulting from the mentioned processes. The results showed that in the first biorefinery scheme, the net profit margin is approximately 53%, while the second present a net profit margin of 6%.     

Aerobic treatment of palm oil mill effluent

In this study treatment of palm oil mill effluent (POME) was investigated using aerobic oxidation based on an activated sludge process. The effects of sludge volume index, scum index and mixed liquor suspended solids during the acclimatizing phase and biomass build-up phase were investigated in order to ascertain the reactor stability. The efficiency of the activated sludge process was evaluated by treating anaerobically digested and diluted raw POME obtained from Golden Hope Plantations, Malaysia. The treatment of POME was carried out at a fixed biomass concentration of 3900+/-200mg/L, whereas the corresponding sludge volume index was found to be around 105+/-5mL/g. The initial studies on the efficiency of the activated sludge reactor were carried out using diluted raw POME for varying the hydraulic retention time, viz: 18, 24, 30 and 36h and influent COD concentration, viz: 1000, 2000, 3000, 4000 and 5000mg/L, respectively. The results showed that at the end of 36h of hydraulic retention time for the above said influent COD, the COD removal efficiencies were found to be 83%, 72%, 64%, 54% and 42% whereas at 24h hydraulic retention time they were 57%, 45%, 38%, 30% and 27%, respectively. The effectiveness of aerobic oxidation was also compared between anaerobically digested and diluted raw POME having corresponding CODs of 3908 and 3925mg/L, for varying hydraulic retention time, viz: 18, 24, 30, 36, 42, 48, 54 and 60h. The dissolved oxygen concentration and pH in the activated sludge reactor were found to be 1.8-2.2mg/L and 7-8.5, respectively. The scum index was found to rise from 0.5% to 1.9% during the acclimatizing phase and biomass build-up phase.     

Trace Gas Emissions from Biomass Burning from Northeast Region in India—Estimates from Satellite Remote Sensing Data and GIS

Biomass burning associated with shifting cultivation areas from the northeastern region of India is an important source of trace gas emissions in the Southeast Asian region. In the present study, satellite data pertaining to IRS-P4 OCM data and DMSP-OLS has been used to quantify the intensity, areal extent and amount of biomass burnt in the northeastern region states at district level. Trace gas emissions have been quantified both by using IPCC based emission ratios and ground based emission ratios obtained from field based studies. Areal estimates with respect to shifting cultivation areas from IRS-P4 OCM satellite data of 4th April 2000 suggested nearly 112.99 km² of the northeastern region of India affected due to shifting cultivation. In the study, DMSP OLS nighttime data has been used to capture the real time fires during the dry season. The results suggested high amount of fires during the March season when compared to April and May. Using the emission ratios obtained from the ground-based studies and IPCC emission ratios, the emissions for the individual non-CO₂ trace gases have been computed in a GIS framework using the biomass data, combustion factors and emission ratios. Results suggested emissions of 2.063 Mt CH₄, 17.94 Mt CO, 1.419 Mt N₂O, and 51.28 Mt NO _x and 2.643 Mt release of CH₄, 3.7204 Mt CO, 0.145 Mt N₂O, and 8.477 Mt NO _x , respectively, from biomass burning due to shifting cultivation for the year 2000, from the northeastern region in India. The study highlights the importance of Satellite Remote sensing data and GIS in quantifying the trace gas emissions from biomass burning.     

新型生物质粉体燃料破碎系统

生物质的破碎是生物质能源利用转化的前提条件。本文介绍了一种用于生物质精细破碎的成套系统，简述了其中粗破碎机、精破碎机的结构特点和工作原理，并对生物质破碎的原料和破碎产物以及系统的生产效率和生产成本进行了分析。     

Quantification of present and past biomass productivity as a support to effective biomass management

We used statistical data including specific calculations to show how the productivity of different biomass categories varies with land use, environmental conditions and land management at national and local level in Slovakia. Three different study sites were selected. Averaged annual productivity of the total biomass from one hectare ranged from 5.96 to 12.03 t on arable land, from 4.02 to 15.20 t on grasslands and from 11.72 to 13.56 t on forest land. Although the biomass productivity varied among the various biomass categories and the study sites, the average annual values of the total biomass per hectare from productive land was about the same at all three study sites (11.62, 11.68, 11.78 t/ha). Detailed quantification of different biomass categories offered a variety of possibilities to use them for further applications in economy and ecosystem services. At the national level, the unused biomass could have produced 29.8 PJ (petajoule) of heat energy.     

Optimization of activated carbon production from empty fruit bunch fibers in one-step steam pyrolysis for cadmium removal from aqueous solution

The fast growth of the palm oil industry in Malaysia is associated with various waste products, namely the empty fruit bunches (EFB), which have a negative impact on the environment. Therefore, these wastes were utilized as a cheap raw material for the production of activated carbon (AC) with less energy consumption. One-step steam pyrolysis was used to produce AC from oil palm empty fruit bunch fibers (EFBF) by varying the operating parameters of temperature, steam flow rate, and activation time using two-level full factorial experimental design (FFD). Ten samples of AC were prepared and the optimized production conditions were chosen based on the ability to adsorb and remove cadmium. Physical activation comprised of carbonization for 30 min using nitrogen gas (N₂), followed by activation with steam at different flow rates (2.0, 3.0, and 4.0 ml/min), temperatures (600, 750, and 900°C) and times (15, 30, and 45 min). The AC sample produced at an activation temperature of 900°C with a steam flow rate of 2.0 ml/min and activation time of 15 min was selected as the best adsorbent with a total yield of 21.7%. It had adsorbed more than 97% of total cadmium from aqueous solution within 2 min of the contact time. Characterization of EFBF-based AC by SEM and BET surface area analysis had shown a good-quality adsorbent with highly active sites and well-developed pores with BET surface area of 635.16 m²/g. Experimental results indicated that the prepared AC from EFBF provide a promising solution in water and wastewater treatment.