The sorption of heavy metal species by sediments in soakaways receiving urban road runoff

Infiltration facilities are designed for both the retention of non-point pollutants and the replenishment of groundwater in urban areas. In this study, sorption tests were conducted to evaluate the speciation of heavy metals and their behaviour in infiltration facilities receiving urban road runoff containing high DOC concentrations and stable heavy metal organic complexes. Road dust and three soakaway sediments were collected from heavy traffic areas and a residential area with an infiltration-type sewerage system in Tokyo, Japan. Sequential multiple batch tests were conducted by adding prepared road dust leachate (artificial road runoff) or deionised water to soakaway sediment to obtain soakaway sediment leachate (artificial percolating water from soakaway sediment), which mimicked the sorption by sediments in soakaways receiving urban road runoff. Heavy metal speciation was assessed by means of a combination of anion-exchange resin measurements and MINTEQA2 model calculations, and further validated by chelating resin measurements. In road dust leachates and soakaway sediment leachates, Cu predominantly existed as organic complexes and carbonates, whereas most Mn, Zn and Cd were found to exist in the form of free ions and carbonate complexes. Stable organic complexes of Cu in road dust leachates were strongly adsorbed by soakaway sediments despite the limited adsorption of DOC. On the other hand, desorption of free Mn, Zn and Cd ions from the sediment receiving road dust leachates was observed, indicating that heavy metals such as Mn, Zn and Cd may ultimately reach groundwater as free ions.     

Influence of soil properties on heavy metal sequestration by biochar amendment: 1. Copper sorption isotherms and the release of cations

The amendment of carbonaceous materials such as biochars and activated carbons is a promising in situ remediation strategy for both organic and inorganic contaminants in soils and sediments. Mechanistic understandings in sorption of heavy metals on amended soil are necessary for appropriate selection and application of carbonaceous materials for heavy metal sequestration in specific soil types. In this study, copper sorption isotherms were obtained for soils having distinct characteristics: clay-rich, alkaline San Joaquin soil with significant heavy metal sorption capacity, and eroded, acidic Norfolk sandy loam soil having low capacity to retain copper. The amendment of acidic pecan shell-derived activated carbon and basic broiler litter biochar lead to a greater enhancement of copper sorption in Norfolk soil than in San Joaquin soil. In Norfolk soil, the amendment of acidic activated carbon enhanced copper sorption primarily via cation exchange mechanism, i.e., release of proton, calcium, and aluminum, while acid dissolution of aluminum cannot be ruled out. For San Joaquin soil, enhanced copper retention by biochar amendment likely resulted from the following additional mechanisms: electrostatic interactions between copper and negatively charged soil and biochar surfaces, sorption on mineral (ash) components, complexation of copper by surface functional groups and delocalized π electrons of carbonaceous materials, and precipitation. Influence of biochar on the release of additional elements (e.g., Al, Ca) must be carefully considered when used as a soil amendment to sequester heavy metals.     

Anaerobic degradation of diethyl phthalate, di-n-butyl phthalate, and di-(2-ethylhexyl) phthalate from river sediment in Taiwan

We investigated anaerobic degradation rates for three phthalate esters (PAEs), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), and di-(2-ethylhexyl) phthalate (DEHP), from river sediment in Taiwan. The respective anaerobic degradation rate constants for DEP, DBP, and DEHP were observed as 0.045, 0.074, and 0.027 1/day, with respective half-lives of 15.4, 9.4, and 25.7 days under optimal conditions of 30 °C and pH 7.0. Anaerobic degradation rates were enhanced by the addition of the surfactants brij 35 and triton N101 at a concentration of 1 critical micelle concentration (CMC), and by the addition of yeast extract. Degradation rates were inhibited by the addition of acetate, pyruvate, lactate, FeCl₃, MnO₂, NaCl, heavy metals, and nonylphenol. Our results indicate that methanogen, sulfate-reducing bacteria, and eubacteria are involved in the degradation of PAEs.     

Occurrence and microbial degradation of phthalate esters in Taiwan river sediments

Concentrations and microbial degradation rates were measured for eight phthalate esters (PAEs) found in 14 surface water and six sediment samples taken from rivers in Taiwan. The tested PAEs were diethyl phthalate (DEP), dipropyl phthalate (DPP), di-n-butyl phthalate (DBP), diphenyl phthalate (DPhP), benzylbutyl phthalate (BBP), dihexyl phthalate (DHP), dicyclohexyl phthalate (DCP), and di-(2-ethylhexyl) phthalate (DEHP). In all samples, concentrations of DEHP and DBP were found to be higher than the other six PAEs. DEHP concentrations in the water and sediment samples ranged from ND to 18.5 μg/l and 0.5 to 23.9 μg/g, respectively; for DBP the concentration ranges were 1.0–13.5 μg/l and 0.3–30.3 μg/g, respectively. Concentrations of DHP, BBP, DCP and DPhP were below detection limits. Under aerobic conditions, average degradation half-lives for DEP, DPP, DBP, DPhP, BBP, DHP, DCP and DEHP were measured as 2.5, 2.8, 2.9, 2.6, 3.1, 9.7, 11.1 and 14.8 days, respectively; under anaerobic conditions, respective average half-lives were measured as 33.6, 25.7, 14.4, 14.6, 19.3, 24.1, 26.4 and 34.7 days. In other words, under aerobic conditions we found that DEP, DPP, DBP, DPhP and BBP were easily degraded, but DEHP was difficult to degrade; under anaerobic conditions, DBP, DPhP and BBP were easily degraded, but DEP and DEHP were difficult to degrade. Aerobic degradation rates were up to 10 times faster than anaerobic degradation rates.     

东莞地下水邻苯二甲酸酯分布特征及来源探讨

在广东东莞地区采集了59组地下水水样和9组地表水水样,采用气相色谱-质谱联用技术进行测定,结果表明,地下水中邻苯二甲酸酯(PAEs)的检出率为39.0％,6种PAEs的质量浓度在未检出～6.70 μg/L.其中,邻苯二甲酸双(2-乙基己基)酯(DEHP)检出率最高,为22.O％,最大值为6.20 μg/L；邻苯二甲酸二...     

Comparison of nonideal sorption formulations in modeling the transport of phthalate esters through packed soil columns

Sorption of dimethyl phthalate (DMP), diethyl phthalate (DEP) and dipropyl phthalate (DPP) to two soil materials that vary in organic matter content was investigated using miscible displacement experiments under saturated flow conditions. Generated breakthrough curves (BTCs) were inversely simulated using linear, equilibrium sorption (LE), nonlinear, equilibrium sorption (NL), linear, first-order nonequilibrium sorption (LFO), linear, radial diffusion (LRD), and nonlinear, first-order nonequilibrium sorption (NFO) models. The Akaike information criterion was utilized to determine the preferred model. The LE model could not adequately describe phthalate ester (PE) BTCs in higher organic matter soil or for more hydrophobic PEs. The LFO and LRD models adequately described the BTCs but a slight improvement in curve-fitting was gained in some cases when the NFO model was used. However, none of the models could properly describe the desorptive tail of DPP for the high organic matter soil. Transport of DPP through this soil was adequately predicted when degradation or sorption hysteresis was considered. Using the optimized parameter values along with values reported by others it was shown that the organic carbon distribution coefficient (K(oc)) of PEs correlates well with the octanol/water partition coefficient (K(ow)). Also, a strong relationship was found between the first-order sorption rate coefficient normalized to injection pulse size and compound residence time. A similar trend of timescale dependence was found for the rate parameter in the radial diffusion model. Results also revealed that the fraction of instantaneous sorption sites is dependent on K(ow) and appears to decrease with the increase in the sorption rate parameter.     

Humic complexes of diethyl phthalate: molecular modelling of the sorption process

The sorption mechanisms and complex formation between humic acid (HA) and a successively increasing number of diethyl phthalate (DEP) molecules have been studied theoretically using molecular mechanics, the number (n) of DEP molecules being varied from 1 to 30. The energy components of the single HA x nDEP complexes have been used as explanatory variables in a principal component analysis for exploring the presence of similarities/dissimilarities in the energetic properties of the individual xenobiotic complexes. The sorption can be explained in terms of a two-step mechanism. Absorption takes place as long as the host humic acid structure offers (a) enough internal docking space and (b) favorable interactions (energy release) with the guest molecule. This takes place for up to 7 DEP molecules. Further increase in the number to 30 DEP molecules will, due to the lack of free available internal voids, lead to surface controlled adsorption. The two-step sorption process apparently results in (a) a linear increase in energy gain by DEP bonds, and similarly (b) a constant incremental rise in molecular properties of the complexes such as volume and surface area. Three outstanding observations emerge: (1) Structural features at the atomic level (nanochemistry), such as partial atomic charges and high aromaticity of the humic acid, are observed to be dominating the intermolecular interactions in the complexes at the specific sorption sites. (2) Torsional relief and favorable changes in bonding energy also prevail for the growing complex. The latter indicates both the structural flexibility of the HA host and the stabilizing effect of DEP on the complex, by filling of the voids within the HA molecule. (3) The intermolecular forces are described mainly by hydrogen bonds (electrostatic energy) and interactions between dipole-dipole, such as carboxylic functions and uncharged moieties such as aromatic rings (van der Waals energy).     

Fate and effects of nutrients and heavy metals in experimental salt marsh ecosystems

Fate and effects of the macro nutrients nitrogen and phosphorus, and the heavy metals zinc, copper and cadmium, brought into experimental salt marsh ecosystems via sediment supply, were studied over a three-year period. The supply of sediment from the Marsdiep (at a low and high rate) and from the harbour of Delfzijl (at a high rate) led to an increase of the macro nutrients and heavy metals in the top soil. The growth of the salt marsh plants Aster tripolium, Puccinellia maritima and Spartina anglica and the uptake of the macro nutrients and heavy metals by the plants was only slightly affected by the addition of sediment. A high load of sediment led to an increase in growth or in the concentrations of the macro nutrients or heavy metals in the plants at a number of sampling dates, but only minor differences between treatments were found. From a mass balance constructed over a three-year study period it could be concluded that about 50% of the macro nutrients and heavy metals were retained in the salt marsh sediment. This was equal to the retained amount of organic matter, indicating that retention of the elements was closely related to retention of organic matter. The 50% loss of the macro nutrients and heavy metals probably occurred via ebb tides after resuspension of sediment and organic matter.     

Phthalate and PAH concentrations in dust collected from Danish homes and daycare centers

As part of the Danish Indoor Environment and Children’s Health (IECH) study, dust samples were collected from 500 bedrooms and 151 daycare centers of children (ages 3 to 5) living on the island of Fyn. The present paper reports results from the analyses of these samples for five phthalate esters (diethyl phthalate (DEP), di(n-butyl) phthalate (DnBP), di(isobutyl) phthalate (DiBP), butyl benzyl phthalate (BBzP), di(2-ethylhexyl) phthalate (DEHP)) and three PAHs (pyrene, benz[a]anthracene (B[a]A) and benzo[a]pyrene (B[a]P)). The three PAHs and DEHP were detected in dust samples from all sites, while DEP, DnBP, DiBP and BBzP were detected in more than 75% of the bedrooms and more than 90% of the daycare centers. The dust mass-fractions of both phthalates and PAHs were log-normally distributed. With the exception of DEP, the mass-fractions of phthalates in dust were higher in daycare centers than homes; PAH mass-fractions in dust were similar in the two locations. There was no correlation among the different phthalates in either homes or daycare centers. In contrast, the PAH were correlated with one another – more strongly so in homes (R² = 0.80–0.90) than in daycare centers (R² = 0.28–0.45). The dust levels of several phthalates (BBzP, DnBP and DEHP) were substantially lower than those measured in a comparable study conducted 6–7 years earlier in Sweden. Although usage patterns in Denmark differ from those in Sweden, the current results may also reflect a change in the plasticizers that are used in common products including toys. PAH levels were roughly an order of magnitude lower than those measured in Berlin and Cape Cod residences, suggesting that the Danish sites are less impacted by motor vehicle emissions.     

Do tubificid worms influence the fate of organic matter and pollutants in stormwater sediments?

In urban area, management of stormwater leads to the accumulation of polluted sediments at the water-sediment interface of various aquatic ecosystems. In many cases, these sediments are colonised by dense populations of tubificid worms. However, the influence of tubificid worms on the fate of stormwater sediments has never been tackled. The aim of this study was to measure in sediment columns the influence of tubificid worms on sediment reworking, organic matter processing (O(2) uptake and release of NH(4)(+), NO(3)(-), PO(4)(3-), and dissolved organic carbon), release of hydrocarbons and heavy metals, and microbial characteristics. Results showed that tubificid worms increased the release of NH(4)(+), PO(4)(3-), and dissolved organic carbon by 2-, 4-, and 3-fold, respectively. O(2) uptake also increased by more than 35% due to tubificid activity. The increase in the percentages of active bacteria and hydrolytic activity in the presence of worms indicated that the higher sediment respiration was caused by the stimulation of microbial communities. A reduction of the number of sulphate-reducing bacteria in the uppermost layers of the sediment was attributed to the penetration of O(2) due to worm activity. These significant effects of tubificid worms were probably linked to the dense network of burrows, which enhanced the exchange surface between the water column and the sediment. No release of heavy metals and hydrocarbons to the water phase was detected in the sediment columns. Understanding the fate and effect of organic stormwater sediments in the natural environment requires the integration of the role of bioturbation in urban pollution studies.     

Sorption of thallium(I) onto geological materials: influence of pH and humic matter

The sorption behaviour of the severely toxic heavy metal thallium (Tl) as a monovalent cation onto three representative materials (goethite, pyrolusite and a natural sediment sampled from a field site) was examined as a function of pH in the absence and presence of two natural humic acids (HAs), using ²⁰⁴Tl(I) as a radiotracer. In order to obtain a basic understanding of trends in the pH dependence of Tl(I) sorption with and without HA, sorption of HAs and humate complexation of Tl(I) as a function of pH were investigated as well. In spite of the low complexation between Tl(I) and HAs, the presence of HAs results in obvious alterations of Tl(I) sorption onto pyrolusite and sediment. An influence on Tl(I) sorption onto goethite was not observed. Predictions of K_d (distribution coefficient) for Tl(I) on goethite in the presence of HAs, based on a linear additive model, agree well with the experimental data, while a notable disagreement occurs for the pyrolusite and sediment systems. Accordingly, it is suggested that HAs and goethite may act as a non-interacting sorbent mixture under the given conditions, but more complex interactions may take place between the HAs and the mineral phases of pyrolusite or sediment.     

Estimation of apparent rate coefficients for phenanthrene and pentachlorophenol interacting with sediments

To gain information on organic pollutants in water-sediment systems, a compartment model was applied to study the sorption course of phenanthrene and pentachlorophenol (PCP) in sediments. The model described the time-dependent interaction of phenanthrene and PCP with operationally defined reversible and irreversible (or slowly reversible) sediment fractions. The interactions between these fractions were described using first order differential equations. By fitting the models to the experimental data, apparent rate constants were obtained using numerical optimization software. The model optimizations showed that the amount of reversible phase increased rapidly in the first 10 d with the sorption time, then decreased after 10 d, while the amount of irreversible phase increased in the total sorption course. That suggested the mass transport between reversible phase and irreversible phase. The extraction efficiency with hot methanol ranged from 36% to 103% for phenanthrene and from 65% to 101% for PCP, with the trend of decreasing with sorption time.     

北运河表层沉积物对重金属Cu、Pb、Zn的吸附

首先分析了北运河6个采样点表层沉积物中重金属含量及相关基本特征。通过实验室模拟实验,利用分配系数Kd评价沉积物对重金属Cu、Pb、Zn的吸附特性,进一步考察了水体pH变化和有机质对重金属在北运河沉积物上吸附的影响。结果表明,沉积物中重金属的含量顺序为Zn>Cu>Pb,去除有机质后,沉积物对重金属的吸附能力显著降低,但各采样点中的重金属含量,沉积物对重金属吸附能力,以及沉积物中的有机质含量并没有明显相关性,这可能是因为不同采样点中有机质种类与结构不同导致的。总之,北运河沉积物对Pb有很强的吸附能力,其次是Cu和Zn,而且,Cu、Zn、Pb的吸附量随着pH的升高逐渐增大,水体pH值对于Zn的吸附影响更大。     

The role of dissolved organic carbon in the mobility of Cd, Ni and Zn in sewage sludge-amended soils

A pot experiment was conducted to investigate the effect of application of naturally derived dissolved organic compounds (DOC) on the uptake of Cd, Ni and Zn by Lolium perenne L. from mixtures of soil and sewage sludge and on their extractability with CaCl2. DOC was applied at concentrations of 0, 285 and 470 mg l(-1) to a loamy sand (LS) and a sandy clay loam (SCL) soil mixed with sewage sludge at rates equivalent to 0, 10 and 50 t ha(-1). DOC applications significantly increased the extractability of metals and also their uptake by ryegrass, but the increase was greater where sludge was applied at 50 t ha(-1). It is suggested that DOC in soils significantly increased the availability of the metals to plants. This was especially the case in the LS soil, where DOC had less competition with surface sorption than in the SCL soil.     

The effect of pH, ion strength and reactant content on the complexation of Cu2+ by various natural organic ligands from water and soil in Hong Kong

The complexation constants for copper associated with different natural organic ligands, including dissolved organic carbon (DOC) extracted from water, water soluble organic carbon (WSOC), fulvic acid (FA) and humic acid (HA) from soil, were determined and then compared based on discrete single site model. Both ion-selective electrode (ISE) and anodic stripping voltammetry were used to determine the content of free copper ions, while the relative number of complexation sites was estimated using a fluorescence quenching (FQ) at the same time. ISE proved to be the most applicable technique when the concentration of copper was above 10(-7) moll(-1). The logk values for two WSOC sample sites (Song Ziyuan and Xin Niangtan) were 4.64 and 4.66; higher than both the DOC and HA values yet lower than the FA values, which were unusually high due to unavoidable pollution from the cation exchange resin used during the purification process. Binding affinities between the copper ions and the organic ligands obtained from streams in Yong Wei (DOC) and Song Ziyuan (WSOC) were influenced by pH, ion strength, and reactant concentration. Values for logk increased with increases in pH (ion strength of 0.1 N). At pH 4, the logk values decreased with increases in the supporting electrolyte concentration and total copper ion additions.     

Investigation of the removal of heavy metals from sediments using rhamnolipid in a continuous flow configuration

Heavy metal contamination of sediments is hazardous to benthic organisms and needs more attention in order to prevent entry of these heavy metals into the food chain. Biosurfactants have shown the capability to remove heavy metals from soils and sediments. The objective of this research was to evaluate the performance of rhamnolipid, a glycolipid biosurfactant, in a continuous flow configuration (CFC) for removal of heavy metals (copper, zinc, and nickel) from the sediments taken from Lachine Canal, Canada, to simulate a flow through remediation technique. In this configuration, rhamnolipid solution with a constant rate was passed through the sediment sample within a column. Important parameters such as the concentration of rhamnolipid and the additives, time and the flow rate were investigated. The removal of heavy metals from sediments was up to 37% of Cu, 13% of Zn, and 27% of Ni when rhamnolipid without additives was applied. Adding 1% NaOH to 0.5% rhamnolipid improved the removal of copper by up to 4 times compared with 0.5% rhamnolipid alone. This information is valuable for designing a remediation protocol for sediment washing.     

Effects of bacterial activities on the release of heavy metals from contaminated dredged sediments

The potential impact of indigenous bacterial processes on the release of heavy metals from dredged sediment deposits was investigated. Batch re-suspension experiments were conducted in order to investigate the release of Zn, Cd, Cu and Pb from a polluted anoxic sediment submitted to oxidative perturbations. The concentrations of heavy metals, sulphate and dissolved organic carbon (DOC) were periodically recorded, and cell counts were performed to follow the evolution of several bacterial species. The specific effects of microbial processes were quantified by performing re-suspension assays on sterilised samples. Moreover, the effect of an initial acidification of the system was studied. The results showed that metal release was mainly due to oxidation of sulphide minerals contained in the sediment. Sulphur-oxidising bacteria such as Acidithiobacillus thiooxidans were identified to play a major role in the process, by enhancing the oxidation kinetic. However, the acid production resulting from these reactions was almost totally buffered by the dissolution of the calcite present in the sediment. Copper was released to a lesser extent, and a strong association with organic matter was observed. Lead was not observed in solution, because of its low solubility at neutral conditions and of its re-adsorption on the solid phase. The initial acidification of the system resulted in an faster growth of the acidophilic A. thiooxidans. A subsequent pH drop originating from microbial processes was then observed during the first stages of the experiment. As a consequence, drastic increases in metal (Zn, Cd) release were observed.     

Sorption of phenanthrene by soils contaminated with heavy metals

The fate of polycyclic aromatic hydrocarbons (PAHs) in soils with co-contaminants of heavy metals has yet to be elucidated. This study examined sorption of phenanthrene as a representative of PAHs by three soils contaminated with Pb, Zn or Cu. Phenanthrene sorption was clearly higher after the addition of heavy metals. The distribution coefficient (K(d)) and the organic carbon-normalized distribution coefficient (K(oc)) for phenanthrene sorption by soils spiked with Pb, Zn or Cu (0-1000 mg kg(-1)) were approximately 24% larger than those by unspiked ones, and the higher contents of heavy metals added into soils resulted in the larger K(d) and K(oc) values. The enhanced sorption of phenanthrene in the case of heavy metal-contaminated soils could be ascribed to the decreased dissolved organic matter (DOM) in solution and increased soil organic matter (SOM) as a consequence of DOM sorption onto soil solids. Concentrations of DOM in equilibrium solution for phenanthrene sorption were lower in the case of the heavy metal-spiked than unspiked soils. However, the decreased DOM in solution contributed little to the enhanced sorption of phenanthrene in the presence of metals. On the other hand, the sorbed DOM on soil solids after the addition of heavy metals in soils was found to be much more reactive and have far stronger capacity of phenanthrene uptake than the inherent SOM. The distribution coefficients of phenanthrene between water and the sorbed DOM on soil solids (K(ph/soc)) were about 2-3 magnitude larger than K(d) between water and inherent SOM, which may be the dominant mechanism of the enhanced sorption of phenanthrene by soils with the addition of heavy metals.     

Effect of dissolved organic carbon on the environmental distribution of nonpolar organic compounds

The effect of dissolved organic carbon on the process of pollutant sorption to aquatic sediments was studied using sediments from the Boonton Reservoir/Rockaway River system in northern New Jersey. Addition of DOC to the aqueous phase reduced the sorption of DDT to sediments, but had no effect on the sorption of Lindane. The effect of the DOC is to increase the amount of DDT in the soluble phase and enable transport of the compound throughout an aquatic system. The apparent influence of DOC on the equilibrium distribution of organic compounds is illustrated by modifying an existing environmental model.     

pH值对霞湾港沉积物重金属Zn、Cu释放的影响

以霞湾港(铜霞路段)的底泥沉积物为研究对象,采用重金属连续浸提法对重金属Zn、Cu在沉积物中的5种形态进行浸提,分析了其分布特征和在不同pH值与时间的条件下重金属的释放规律。研究结果表明,重金属Zn主要以铁锰氧化物结合态和碳酸盐结合态的形态存在,Cu主要以有机结合态和残渣态的形态存在,可交换离子态的重金属含量都很低。重金属Zn、Cu从沉积物中的释放,主要是在酸性条件下发生,在酸性区内释放量随pH的升高而迅速降低。释放能力和释放速率均为ZnCu,它们释放的过程基本相似,释放速率都比较小,向环境中的释放是个长期过程。