PCB-blood levels in teachers, working in PCB-contaminated schools

In order to get more information about potential health hazards due to indoor air PCBs the present study investigated the PCB indoor concentration in schools as well as the blood levels of 6 PCB-indicator congeners in teachers from these schools. 151 teachers (78 male and 73 female; mean age 48 years) from 3 contaminated and 2 control schools participated in the study. Maximal indoor air values for total PCBs (6 PCB-indicator congeners times 5) in schools ranged from 1587 to 10655 ng/m3. Blood analyses indicated an increase in mean PCB 28 level from 0.036 (control group) to 0.098 microg/l in teachers from a school with heavy contamination of low chlorinated PCB. But there was no significant increase of PCB 138, 153 and 180 in blood above the normal background concentrations in any of the contaminated schools (mean values of all groups: PCB 138 = 0.66, 153 = 0.95, 180 = 0.70 microg/l blood). The results of blood analyses and additional toxicokinetic calculations suggested that inhalative PCB-uptake in the most contaminated schools caused a minor increase above mean background-PCB concentrations in blood. In conclusion, despite high PCB indoor air levels in schools, there was only a moderate increase in blood concentrations of teachers, mainly due to congeners with low chlorination (PCB 28 to PCB 101).     

Extraction of organic contaminants from marine sediments and tissues using microwave energy.

In this study, we compared microwave solvent extraction (MSE) to conventional methods for extracting organic contaminants from marine sediments and tissues with high and varying moisture content. The organic contaminants measured were polychlorinated biphenyl (PCB) congeners, chlorinated pesticides, and polycyclic aromatic hydrocarbons (PAHs). Initial experiments were conducted on dry standard reference materials (SRMs) and field collected marine sediments. Moisture content in samples greatly influenced the recovery of the analytes of interest. When wet sediments were included in a sample batch, low recoveries were often encountered in other samples in the batch, including the dry SRM. Experiments were conducted to test the effect of standardizing the moisture content in all samples in a batch prior to extraction. SRM1941a (marine sediment). SRM1974a (mussel tissue), as well as QA96SED6 (marine sediment), and QA96TIS7 (marine tissue), both from 1996 NIST Intercalibration Exercise were extracted using microwave and conventional methods. Moisture levels were adjusted in SRMs to match those of marine sediment and tissue samples before microwave extraction. The results demonstrated that it is crucial to standardize the moisture content in all samples, including dry reference material to ensure good recovery of organic contaminants. MSE yielded equivalent or superior recoveries compared to conventional methods for the majority of the compounds evaluated. The advantages of MSE over conventional methods are reduced solvent usage, higher sample throughput and the elimination of halogenated solvent usage.     

Enantiomer fractions of chiral organochlorine pesticides and polychlorinated biphenyls in standard and certified reference materials

Enantiomeric ratios (ERs) and enantiomeric fractions (EFs) of a number of chiral organochlorine pesticides and PCB atropisomers were measured by chiral gas chromatography/mass spectrometry (GC/MS) in five standard (SRM) and certified (CRM) reference materials: SRM 1588a (organics in cod liver oil), SRM 1945 (organics in whale blubber), Marine Mammal Quality Assurance Exercise Control Material IV (NIST IV, organics in whale blubber), CRM trout, and CRM EC-5 (sediment). Target analytes were cis- and trans-chlordane, heptachlor exo-epoxide, oxychlordane, U82, MC5, MC6, MC7, o,p^′-DDT, and PCB congeners 91, 95, 136, 149, 174, 176, and 183. Measured ERs and EFs are in close agreement with the few literature values reported for some of these analytes in SRMs and CRMs. Chiral PCB ERs and EFs measured by one-dimensional chiral GC/MS were similar to values measured using multidimensional chiral GC/MS. Non-racemic chiral compositions are in agreement with known uptake and biotransformation in the respective environmental matrices. These values should aid in the quality assurance/quality control methodologies for chiral environmental chemistry using standardized reference materials.     

Synthesis of polychlorinated biphenyls and their metabolites with a modified Suzuki-coupling

A modified procedure for the synthesis of polychlorinated biphenyls (PCBs) utilizing the Suzuki-coupling, a palladium-catalyzed cross-coupling reaction, is described. The coupling of (chlorinated) benzene boronic acids with bromochlorobenzenes, using Pd(dppf)(2)Cl(2) (dppf = 1,1'-bis(diphenylphosphino)ferrocene) as the catalyst and aqueous sodium carbonate as the base, gave the desired PCB congeners in moderate to good yields. Eleven PCB congeners, including environmentally important PCB congeners and metabolites, were synthesized using this modified procedure. This new catalyst Pd(dppf)(2)Cl(2) offers the advantage of being less air-sensitive and has a longer shelf life compared to Pd(PPh(4))(4). Three new (di-)methoxylated PCB congeners were synthesized using the same procedure by either coupling a chlorinated benzene boronic acid with a bromo (di-)methoxybenzene or by coupling a (di-)methoxy benzene boronic acid with a chlorinated bromobenzene. The dimethoxylated PCB congeners were readily converted into the respective dihydroxylated PCB derivatives using boron tribromide in dichloromethane. This approach offers the advantage of high selectivity and moderate to good yields compared to conventional methods such as the Cadogan reaction and allows the use of less toxic starting materials.     

Airborne PCB as a contamination risk on freeze-drying of sediment

In a study of polychlorinated biphenyls (PCB) in freeze-dried sediments from Swedish lakes, the samples were found to contain unexpectedly high concentrations of PCBs. In one of the lakes (Bj?rken), e.g. the concentration of PCB-28 was found to be 189 ng/g dw after freeze-drying compared to 7 ng/g dw after air-drying of the sediment and therefore our hypothesis was that the contamination had occurred during the freeze-drying procedure. Hence, a dry reference sediment (RS) was used in order to identify potential sources of PCB contamination. The investigation included freeze-drying of the dry RS in five different laboratories, exposure to the air in the freeze-drying room, storage at room temperature and air-drying in a certain fume hood and in a laminar flow clean bench. The pattern and concentrations of PCBs detected in the exposed RS were strongly influenced by low chlorinated PCB congeners under all of these conditions with exception for air-drying in the fume hood. Storage in the laboratory air resulted in a slight elevation in the concentrations of low chlorinated PCB congeners, whereas higher concentrations of all PCB congeners were observed after freeze-drying. In all experiments the contamination appeared to be due to adsorption of PCB from the laboratory air. On the basis of these findings we recommend that reference material be subjected to the entire procedure, including sample preparation, in order to monitor contamination and that a procedure involving solvent extraction of wet sediment samples is used, whenever possible, instead of procedures involving dry samples.     

PCB decomposition and formation in thermal treatment plant equipment

In this study we investigated both the decomposition and unintentional formation of polychlorinated biphenyl congeners during combustion experiments of refuse-derived fuel (RDF) and automobile shredder residue (ASR) at several stages in thermal treatment plant equipment composed of a primary combustion chamber, a secondary combustion chamber, and other equipments for flue gas treatment. In both experiments, the unintentional formation of PCB occurred in the primary combustion chamber at the same time as the decomposition of PCB in input samples. By combusting RDF, non-ortho-PCB predominantly formed, whereas ortho-PCB and symmetric chlorinated biphenyls (e.g., #52/69, #87/108, and #151) tended to be decomposed. ASR formed the higher chlorinated biphenyls more than RDF. These by-products from ASR had no structural relation with ortho-chlorine. Lower chlorinated biphenyls appeared as predominant homologues at the final exit site, while all congeners from lower to higher chlorinated PCB were unintentionally formed as by-products in the primary combustion chamber. This result showed that the flue gas treatment equipments effectively removed higher chlorinated PCB. Input marker congeners of RDF were #11, #39, and #68, while those for ASR were #11, #101, #110/120, and #118. Otherwise, combustion marker congeners of RDF were #13/12, #35, #77, and #126, while those for ASR were #170, #194, #206, and #209. While the concentration of PCB increased significantly in the primary combustion chamber, the value of toxicity equivalency quantity for dioxin-like PCB decreased in the secondary combustion chamber and the flue gas treatment equipments.     

Why biota still accumulate high levels of PCB after removal of PCB contaminated sediments in a Norwegian fjord

Accumulation of polychlorinated biphenyls (PCBs) in blue mussels (Mytilus edulis) and semipermeable membrane devices (SPMDs) was still high after the removal of PCB contaminated sediments from a Norwegian fjord by dredging. The accumulation of low chlorinated PCB congeners with a low octanol water-partitioning coefficient (K_ow) in blue mussels and SPMDs was higher than for the highly chlorinated congeners with a high K_ow. The accumulation of low chlorinated congeners was also higher in a lightly contaminated area compared to a highly contaminated area. That dredging the contaminated sediments was unsuccessful in lowering PCB levels in the biota may be for the following reasons: (1) Due to the low solubility of PCBs in the water it is possible that a decrease in the sediment concentration of PCB would leave the water concentrations of PCB unchanged. (2) Removal of the fine organic sediments may also play an important role, since a seabed with coarse inorganic material has a lesser ability to bind PCB. (3) The dredging may whirl up fine contaminated particles that eventually settles on the seabed producing a thin contaminated sediment layer that determine the water concentration. (4) Bioaccumulation in blue mussels and in the SPMDs occurs mostly from PCB dissolved in the water column. Since the water concentration of PCB is unchanged by the dredging, the accumulation in SPMDs and mussels is the same as before dredging. Further monitoring need to be carried out to report the long-term effect of the dredging.     

Congener-specific accumulation and trophic transfer of polychlorinated biphenyls in spider crab food webs revealed by stable isotope analysis

Polychlorobiphenyls (PCB) and stable isotopes (delta15N and delta13C) were analyzed in the spider crab (Maja brachydactyla) food web from the Iroise Sea (Western Brittany) and the Seine Bay (Eastern English Channel). PCB concentrations were all significantly higher in organisms from the Seine Bay than those from the Iroise Sea. PCB patterns were strongly related to the feeding mode of the species, and increased influence of higher chlorinated congeners was highlighted with trophic position of the organisms. PCB concentrations (lipid normalized) were significantly related to the isotopically derived trophic level (TL) in spider crab food webs. The highest trophic magnification factors (TMFs) were calculated for the congeners with 2,4,5-substitution, and were lower in the Seine Bay compared to the Iroise Sea. The confrontation of PCB and TL data also revealed biotransformation capacity of decapod crustaceans for specific congeners based on structure-activity relations.     

Dynamics of PCB removal and detoxification in historically contaminated soils amended with activated carbon

Activated carbon (AC) can help overcome toxicity of pollutants to microbes and facilitate soil bioremediation. We used this approach to treat a Histosol and an Alluvial soil historically contaminated with PCB (4190 and 1585 mg kg⁻¹, respectively; primarily tri-, tetra- and pentachlorinated congeners). Results confirmed PCB persistence; reductions in PCB extractable from control and AC-amended soils were mostly due to a decrease in tri- and to some extent tetrachlorinated congeners as well as formation of a bound fraction. Mechanisms of PCB binding by soil and AC were different. In addition to microbial degradation of less chlorinated congeners, we postulate AC catalyzed dechlorination of higher chlorinated congeners. A large decrease in bioavailable PCB in AC-amended soils was demonstrated by greater clover germination and biomass. Phytotoxicity was low in treated soils but remained high in untreated soils for the duration of a 39-month experiment. These observations indicate the utility of AC for remediation of soils historically contaminated with PCB.     

Compound-specific isotopic and congener-specific analyses of polychlorinated biphenyl in the heat medium and rice oil of the Yusho incident

Compound-specific isotope analysis (CSIA) can be used to examine the source and transformation processes of organic pollutants in the environment. We performed a carbon stable isotope analysis of polychlorinated biphenyl (PCB) congeners in the PCB heat-transfer medium (heat medium) and the original Kanechlor-400 (KC-400, a commercial brand of PCBs) involved in the Yusho incident. The main purpose is to investigate whether isotope fractionation occurred in the rice oil deodorization process that caused the incident. The carbon isotope ratios (δ¹³C values) of the targeted PCB congeners ranged from ? 29.39 to ? 27.00‰ in the heat medium and from ? 28.77 to ? 27.05‰ in the original KC-400. No significant differences were found in the δ¹³C values, suggesting carbon isotope fractionation did not occur for the targeted PCB congeners in the heat medium when deodorization of rice oil occurred at temperatures above 200 °C. Furthermore, we also conducted a congener-specific analysis of 64 PCB congeners found in the heat medium and rice oil contaminated by it. The total PCB congener concentrations were 503 mg/g in the heat medium and 81 μg/g in the rice oil. The concentrations of the highly chlorinated congeners were significantly lower in the heat medium than in the original KC-400, and the compositional ratios of the lowly chlorinated congeners were relatively lower in the rice oil than in the heat medium. These results suggest that the PCB congener patterns gradually changed from that of the original KC-400 in the deodorization process and subsequent contamination into the rice oil. Thus, a combination of CSIA and congener-specific analysis is a new approach for investigating the changing PCB congener profiles in samples from the Yusho incident.     

Trends of PCDD/F and PCB concentrations and depositions in ambient air in Northwestern Germany

Time series of polychlorinated dioxins and furans (PCDD/F) and polychlorinated biphenyls (PCB) in ambient air of a large conurbation in North-Western Germany are presented and analyzed. The trend of PCDD/F concentrations, starting from as early as 1988, shows a pronounced decrease by at least one order of magnitude, demonstrating that the emission reductions were effective. The PCDD/F depositions also have decreased by a factor of 5 since 1992. However, both trends have leveled out since 2005. Time series of PCB concentrations and depositions starting in 1994 show only slight decreases for the concentrations and almost no decrease for the depositions. From the decay rates following first order kinetics, half-lives in the order of 5-15 years for the PCDD/F and 15-31 years for the sum of the six indicator PCB could be calculated, which are much longer than the half-lives estimated from their reactivity towards the OH radical. Apparently, small fresh emissions (PCDD/F), considerable secondary emissions and evaporation from contaminated soils slow down their decay in the atmosphere of big conurbations. Analyzing the decay rates of individual PCB congeners shows that the lower chlorinated and more volatile ones are removed faster than the higher chlorinated congeners, probably via gas phase reactions with the OH radical. It can be concluded from the present study that the input of PCDD/F and PCB into the food chain via the air path will continue for another one or two decades in big conurbations.     

Sexual difference in PCB congener distributions of burbot (Lota lota) from Lake Erie

Concentrations of 86 congeners of polychlorinated biphenyls (PCBs) were determined for 25 adult female and 25 adult male burbot (Lota lota) from Lake Erie. Significant differences in mean proportions of total PCB concentration between males and females ages 14–17 were found for 26 congeners. Males generally had higher mean proportions of hexachloro congeners, whereas females had higher mean proportions of more highly chlorinated congeners. In contrast, only four congeners exhibited differences between males and females ages 6–13 in mean proportions of total PCB. Therefore, the sexual difference in PCB congener distribution widened for older burbot. Males ages 14–17 also had higher proportions of certain hexachloro congeners than the other three demographic groups (males ages 6–13, females ages 6–13, and females ages 14–17) we examined. The reverse was true for more highly chlorinated congeners. The results supported a previous hypothesis that older male burbot spent a substantial amount of time feeding in the vicinity of mouths of rivers with sediment contaminated with PCBs. However, additional studies are needed to clarify and corroborate this apparent “hot spot” effect, such as seasonal movements, spatial distributions, and diet of burbot; and PCB congener distributions of various species of prey fishes captured at various locations throughout the eastern basin of Lake Erie and at different locations in the contaminated rivers.     

Human biomonitoring of polychlorinated biphenyls and polychlorinated dibenzodioxins and dibenzofuranes in teachers working in a PCB-contaminated school

Eighteen teachers from a highly contaminated school and 11 teachers from a control school participated in this study. Total polychlorinated biphenyl (PCB) indoor air concentration (six indicator congeners x 5) was beyond 12000 ng/m3 in some rooms of the contaminated school. PCB 28 and PCB 52 were the prevailing congeners. Whole blood was taken from each participant by the local health authority, pooled in two groups and analysed for the six PCB indicator congeners, non-ortho PCBs and polychlorinated dibenzodioxins (PCDD)/polychlorinated dibenzofurans (PCDF). Blood analysis showed elevated mean PCB 28 and PCB 52 levels for the exposed group, however the two groups were almost identical with regard to PCB 101, 138, 153 and 180. Moreover no difference can be observed for the concentration of non-ortho PCBs and PCDD/PCDF. The data support the finding, that heavy indoor air contamination with low chlorinated PCBs causes an increase of PCB 28 and PCB 52 blood levels. However, this increment was small compared to their total PCB load.     

Bioaccumulation profiles of polychlorinated biphenyls including coplanar congeners and possible toxicological implications in Baikal seal (Phoca sibirica)

Isomer specific concentrations of individual polychlorinated biphenyls (PCBs) including toxic non-ortho (IUPAC 77, 126, 169), mono-ortho (105, 118, 156) and di-ortho (137, 138, 153, 180) coplanar congeners were determined in the blubber of 40 Baikal seals (Phoca sibirica) and as their fish diet collected from Lake Baikal, Siberia. Residue levels of total PCBs in Baikal seals were noticeably high and comparable to those reported for seals from the North Sea, suggesting the recent usage of this compound in the watershed of Lake Baikal. Non-, mono-, and di-ortho coplanar congeners were also detected in Baikal seals and fish. An approach to estimate bioaccumulation profiles of PCB congeners revealed that the non-ortho PCBs, IUPAC 77, 126 and 169 seemed to be less persistent than other congeners. Furthermore, selective biotransformation of PCB congeners having either meta-para vicinal H atoms or both adjacent chlorinated meta-para and ortho-meta positions has been suggested. Comparison of 2,3,7,8-TCDD toxic equivalents (TEQ) of non-, mono- and di-ortho coplanar congeners in Baikal seals with those for other marine mammals suggested higher enrichment of mono-ortho congeners, particularly IUPAC 105 and 118, which contributed significantly to the total TEQs in Baikal seals. Results imply that the TCDD-like toxicity is relatively serious in Baikal seals, because of the enrichment of these toxic PCB congeners in tissues.     

Degradation pathways of PCBs upon UV irradiation in hexane.

The photodegradations of eight individual PCB congeners (5, 31, 52, 77, 87, 126, 138, 169) in hexane have been investigated employing a mercury lamp. All degradation reactions of the above mentioned PCB congeners are of the pseudo first order. The principal products of PCB decomposition are the less chlorinated biphenyls, and no PCB-solvent adducts are found. Symmetrical and coplanar PCB congeners show lower photoreactivities. The reactivities of the chlorine atoms at various positions of PCB rings are generally in the order: ortho > meta > para. Photodechlorinations occur mainly on the more substituted rings, when the numbers of chlorine atoms on the two phenyl rings are unequal. During photodegradation, some coplanar PCB congeners are formed, which make the TEQ of solutions to decrease slowly or even to increase.     

Spatial distribution of polychlorinated biphenyls in High Tatras lake sediments

The objective of the present study was to gain insight on the spatial distribution of seven polychlorinated biphenyl (PCB) congeners in the High Tatras mountain range in Eastern Europe. Twenty high mountain lakes were sampled on their top-core sediment. Despite the relative uniform composition of PCB congeners among the lakes, there are important differences in the observed concentrations. Moderate top-core sediment concentrations of PCB congeners were observed (1.9 to 38 ng/g dw for ∑PCB) in comparison to other high mountain or Arctic areas. The variation in PCB concentrations can partly be explained by a possible altitudinal effect, resulting in higher PCB concentrations at higher (colder) altitudes. Part of this enhanced accumulation of PCBs could be caused by external factors (topography and meteorology) and internal lake factors (sediment dynamics). Many of these factors were not quantified for all individual lakes and their influence could, therefore, only be studied for some.     

Microbial transformation and degradation of polychlorinated biphenyls

This paper reviews the potential of microorganisms to transform polychlorinated biphenyls (PCBs). In anaerobic environments, higher chlorinated biphenyls can undergo reductive dehalogenation. Meta- and para-chlorines in PCB congeners are more susceptible to dechlorination than ortho-chlorines. Anaerobes catalyzing PCB dechlorination have not been isolated in pure culture but there is strong evidence from enrichment cultures that some Dehalococcoides spp. and other microorganisms within the Chloroflexi phylum can grow by linking the oxidation of H(2) to the reductive dechlorination of PCBs. Lower chlorinated biphenyls can be co-metabolized aerobically. Some aerobes can also grow by utilizing PCB congeners containing only one or two chlorines as sole carbon/energy source. An example is the growth of Burkholderia cepacia by transformation of 4-chlorobiphenyl to chlorobenzoates. The latter compounds are susceptible to aerobic mineralization. Higher chlorinated biphenyls therefore are potentially fully biodegradable in a sequence of reductive dechlorination followed by aerobic mineralization of the lower chlorinated products.     

Study of transportation and distribution of PCBs using an ecologically simulated growth chamber

This study was designed to investigate the transportation, distribution, and bioaccumulation of PCBs in various environmental media and compartments using an ecologically simulated growth chamber. Spatial and temporal trends of PCBs in the growth chamber were discussed. The release of PCB congeners in soil was affected by the amount of rainfall with the transporting direction moving away from PCBs contaminated point. Two pathways of PCBs accumulation in plants were the uptake of roots and the deposition on shoots/leaves. There were 29 PCB congeners been found in the lalang grass. Higher concentrations of lower chlorinated PCBs were identified than higher chlorinated PCBs because of relatively higher vapor pressure for lower chlorinated congeners. After 10months of monitoring, PCBs were detected in water samples which were contributed by the release of PCBs from leached soil. Analysis of sediment showed that the percentages of low- and mid-chlorinated biphenyls were decreased 1% and 13%, respectively compared to the increase (14%) of high-chlorinated biphenyls. The increase of high-chlorinated PCBs was possibly caused by their low hydrophilicity which had resulted higher adsorption rate in sediment. All of five species of fish had been found significant amount of PCBs accumulation ( summation operatorPCBs: 21.7-102.1 microg/g-lipid). The concentrations of PCBs in fish were varied significantly among species. The range of bioaccumulation factors (BAFs) among different species of fish could be as much as 5 times depending on the consumption habits of fish. The mass balance of PCBs distribution in the growth chamber was also discussed.     

PCB congener distributions in muscle,liver and gonad of Fundulus heteroclitus from the lower Hudson River Estuary and Newark Bay

Gradients in sediment polychlorinated biphenyl (PCB) concentrations and PCB congener profiles exist along the Hudson River (NY, USA). We evaluated site and tissue differences in PCB concentration and congener profiles in resident mummichog (Fundulus heteroclitus) collected from PCB-contaminated sites in the lower Hudson River and the New York/New Jersey Harbor Estuary. Fish were collected from three PCB-contaminated sites Piermont Marsh (P), Iona Marsh (I), and Newark Bay (NB), and from two reference sites (Flax Pond, NY; Succotash Salt Marsh, RI). Congener profiles were statistically analyzed using principal component analysis (PCA) and general linear model (GLM) profile analysis. Contaminated fish had PCB tissue concentrations approximately 10-fold higher than those of reference fish. There were no site differences in PCB body burden (all tissues combined) among the contaminated site fish. However, relative PCB concentration did differ between organs: NB fish (gonad=liver>muscle); I and P fish (gonad>liver>muscle). In contrast to PCB content, PCB congener profiles did show site differences; NB mummichog being depleted in the less chlorinated congeners relative to I and P fish, likely reflecting different PCB sources to these populations. Within a site, however, PCB congener patterns were similar between liver, gonad and muscle. In conclusion, PCA and GLM analyses gave complementary results, both analyses indicating differences in site, but not tissue, distributions of PCB congeners. This study also demonstrates that unlike congener profiles, total PCB content does differ dramatically amongst tissues and further, that PCB differences among tissues (gonad vs. liver vs. muscle) can vary with site.     

Polychlorinated biphenyls (PCBs) in indoor air originating from sealants in contaminated and uncontaminated apartments within the same housing estate

Twenty-four congeners of polychlorinated biphenyls (PCBs) were measured in 83 air samples and 20 elastic sealants samples of apartments with PCB-containing sealants. In addition, PCBs were measured in 21 air samples from reference apartments located in an uncontaminated section of the same estate. The PCB_tot levels in the air of the contaminated section were 168-3843 ng m⁻³ (mean: 1030 ng m⁻³), while the mean levels in the reference apartments were 6.03 ng m⁻³. The sum of the 24 measured PCB congeners in sealants from the contaminated section was 187-221 680 mg kg⁻¹. Principal component analysis revealed four groups among the sealant samples with different congener compositions, only two of which were clearly similar to known PCB mixtures, while two were not. Significant correlations and intercorrelations were observed between the lower chlorinated congeners in air and sealant, e.g. for PCB 28_air and 28_seal (p = 0.04) and for PCB 28_air and 52_air, 52_seal. However, no correlation was observed between the lower chlorinated congeners and the sums of PCB (∑PCB₆ or ∑PCB₂₄) or the higher chlorinated congeners. Analysis of air concentrations in relation to questionnaire data indicated that the indoor air levels could be reduced by increased cleaning and airing frequencies.