Changes of polycyclic aromatic hydrocarbons during composting of sewage sludges with chosen physico-chemical properties and PAHs content

The aim of the experiment was to determine changes in the PAH content during sewage sludge composting. The extent was evaluated to which sewage sludge properties influences on PAHs losses during composting. Five municipal sewage sludges were studied from sewage treatment plants located in the south-east of Poland, i.e. in Stalowa Wola, Kra?nik, Lublin, Zamo?? and Bi?goraj. The treatment plants selected were characterised by their differentiation with catchments area as well as the industrial character of the areas. Sludge composting was carried out in aerobic conditions in plastic containers for a period of 76 days. The content of 14 polycyclic aromatic hydrocarbons (PAHs) and some physical-chemical (TOC, Nt, TOC/Nt, CEC, BS, TEB, pH, available potassium and phosphorus, total forms of cations) sewage sludge properties were monitored. In the present study correlations between PAHs losses (during various phases of composting) and physical-chemical properties of sewage sludges and composts were also evaluated. The sewage sludges were characterised both by differentiated properties and by PAH content. The total PAH content (the sum of 14 PAHs from the EPA List with exception of naphthalene and acenaphthene) in the sludges ranged from 3674 to 11236 microg kg(-1). Four- and three-ring compounds were predominant in the sewage sludges. Almost all of the sludges were characterised by differentiated content levels of both individual PAHs groups and PAHs sum. After 76 days of composting, a significant lowering of the PAH content was observed in all sludges as compared to the beginning of the experiment. The range of total observed PAH losses was from 15.8% to 48.6%, depending on the sewage sludge. The largest lowering of the PAH content was observed in the sludge with the lowest concentration of the xenobiotics studied. The largest losses in individual PAHs were observed in the case of five- and six-rings compounds, and were probably related to strong pollutant binding by other components of the sewage sludge. The few significant relationships showed that PAH losses during composting were only slightly determined by the analysed physical-chemical properties.     

Ecotoxicity, phytotoxicity and extractability of heavy metals from different stabilised sewage sludges

The presence of heavy metals in the sludges produced in wastewater treatment plants restricts their use for agricultural purposes. This study compares different types of sludges (aerobic, anaerobic, unstabilised and sludge from a waste stabilisation pond) in order to assess the extractability of heavy metals using simple extraction, water and DTPA. The stabilisation treatment undergone by the sludges influenced the heavy metals extractability. The least mineralised sludges (unstabilised and aerobic) showed higher metal extractability. The sewage sludges were subjected to chemical characterisation and toxicity testing (ecotoxicity and phytotoxicity assays) in absence of substrate, to provide a preliminary assessment of their suitability for land application. The ecotoxicity assays confirmed that no sludge constituted a hazardous waste. The sludge extracts had significant adverse effect on the germination index (GI) of barley (Hordeum vulgare L.) and cress (Lepidium sativum L.), a fact which indicates that some characteristics affected root growth.     

Effect of solids concentration on bacterial leaching of heavy metals from sewage sludge

Microbial metal leaching from sewage sludge (2-9% w/v) was carried out with the iron-oxidizing bacterium Thiobacillus ferrooxidans. Measurements of pH, oxidation-reduction potential, and concentration of Fe2+ indicated that T. ferrooxidans was effective in removing metals from an incubation bath containing less than 5% sludge solids concentration. Specifically, Cu leaching was completely suppressed at a high solids concentration of 9% (w/v). Results indicated that the deactivation of T. ferrooxidans at a high sludge content was mainly due to the presence of inhibiting materials such as organic matter. A mixed culture of sulfur-oxidizing bacteria was obtained by enrichment from anaerobically digested sewage sludge to enhance the efficiency of the microbial leaching process. These bacteria were much more effective in metal leaching than was iron-oxidizing T. ferrooxidans. At 9% (w/v) solids concentration, the leaching efficiencies of Zn and Cu were 78% (2.66 g/kg dry sludge) and 59% (1.36 g/kg dry sludge), respectively. Therefore, when removing heavy metals from the anaerobically digested sewage sludge, the indigenous sulfur-oxidizing bacteria isolated in the current study were more efficient than T. ferrooxidans, especially at high sludge solids concentrations.     

Heavy metal speciation and phytotoxic effects of three representative sewage sludges for agricultural uses

The environmental impact of sewage sludges depends on the availability and phytotoxicity of their heavy metal. The influence of representative sludges (dewatered anaerobic, pelletization, and composted sludge) on the availability of heavy metals, and their effects on seed germination were compared. The total heavy metal concentrations were below the maximum permitted for land-applied waste and the differences among them were small. The DTPA-extracted metal concentrations were rather different. The sequential extraction of the compost showed a slight increase in Cd and Cu availability, and a decrease in the availability of Fe, Mn, Ni and Zn. Pelletization increased the availability of Ni and slightly reduced that of Cr. The dewatering sludge led to greater availability of Cr and Mn but reduced the concentration of Cd. The three different sludges also affected seed germination and root elongation in different ways. The most serious adverse effects were caused by the dewatered sludge extract.     

Heavy metal binding by the polymeric organic fractions of sewage sludges

Organic complexes in sewage sludge play an important role in the speciation and transformation of metals into potentially more toxic and bioavailable forms. Two organic fractions, bacterial extracellular polymer and fulvic acid, were extracted from mixed liquor and digested sewage sludge by methods established as the most appropriate. The homogeneity of the extracts was verified using gel permeation chromatography. Conditional stability constants and complexation capacities of the organic fractions from the sludges with copper, cadmium, nickel and zinc have been determined using equilibrium dialysis titration. Organic fractions extracted from digested sludge demonstrated a greater capacity to complex metals over mixed liquor extracts. Copper formed stronger complexes than nickel with the mixed liquor biomass and cadmium exhibited the greatest affinity for digested sludge organic matter.     

On the use of PAH molecular diagnostic ratios in sewage sludge for the understanding of the PAH sources. Is this use appropriate?

The concentrations ratios of specific pairs of polycyclic aromatic hydrocarbons (PAHs) are widely used for the qualitative determination of the PAHs sources. These ratios are called PAHs molecular diagnostic ratios and are commonly used for PAHs concentrations in air, soils and sediments. Some scientists have extended the use of these ratios also for sewage sludges, suggesting that calculation of these ratios by individual PAHs concentrations can be as effective as in soils or sediments. This paper describes the reason why the PAH molecular ratios calculated from sewage sludge concentrations should not be used for the understanding of the PAH sources.     

Simple and sequential extractions of heavy metals from different sewage sludges

The presence of heavy metals in the sludges produced in waste-water treatment plants restricts their use for agricultural purposes. This study looks at different types of sludges (aerobic, anaerobic, unstabilised and sludge from a waste stabilisation pond) and compares the distribution of the heavy metals they contain according to the treatment that they have undergone. Some agronomic parameters necessary for characterising a sludge as suitable for use as amendment were determined. The aim of this study is to compare the availability and the localisation of heavy metals in different sewage sludges using simple (water and DTPA) extraction and the BCR (Community Bureau of Reference) sequential extraction procedure. It was confirmed that the total concentration of heavy metals did not exceed the limits set out by European legislation and that the stabilisation treatment undergone by the sludges strongly influenced the heavy metal distribution and the phases to which they were associated and their bioavailability level. The DTPA extraction procedure is cheap and easy to perform and the obtained results are similar to those obtained with the sequential procedure.     

Correlation between inorganic (heavy metals) and organic (PCBs and PAHs) micropollutant concentrations during sewage sludge composting processes

The nature and congener composition of PCBs and PAHs present in sewage sludge composting processes was investigated. These studies included analysis of the most significant process parameters (such as pH, temperature, weight percentage variation) and in addition heavy metals whose typical composting speciation and behaviour were also considered in order to better understand organic compound time profiles. The significant correlation found between Pb, Cd, Cu and PCBs and between PAHs and Hg implies that quite a strong adsorption of PCBs onto organic matter takes place and also provides evidence for the volatilisation of PAHs. Chemical characteristics of inorganic species and organic compounds are summarised to account for the observed correlation and time trend profiles. Moreover, single congener concentrations demonstrate that the number of Cl substituents for PCBs and condensed benzene rings for PAHs determine to what extent they can be broken down for biodegradation and removed through volatilisation respectively.     

PCDD/F, PAH and heavy metals in the sewage sludge from six wastewater treatment plants in Beijing, China

In order to better understand land application of sewage sludge, the characterization of heavy metals, PCDD/F and PAHs in sewage sludge was investigated from six different wastewater treatment plants (WWTP) in Beijing City, China. It was found that the total concentrations of Zn in Wujiacun (WJC) sewage sludge, and Cd and Hg in sewage sludge generated from all of the six different places are higher than Chinese regulation limit of pollutants for sludge to be used for agriculture (GB18918-2002). The levels of 16 PAHs that have been categorized as priority pollutants by US EPA in the sewage sludge samples varied from 2467 to 25923 microg/kg (dry weight), the highest values of 25923 microg/kg being found in WJC WWTP. The concentrations of Benzo[a]pyrene were as high as 6.1mg/kg dry weight in WJC sewage sludge, exceeding the maximum permitted content by GB18918-2002. Individual PAH content varies considerably with sewage samples. The ratios of anthracene to anthracene plus phenanthrene (An/178), benz[a]anthracene to benz[a]anthracene plus chrysene (BaA/228), indene[1,2,3-cd]pyrene to indene[1,2,3-cd]pyrene plus benzo[g,h,i]perylene (In/In+BP), and fluoranthene to fluoranthene plus pyrene (Fl/Fl+Py) suggest that petroleum and combustion of fossil fuel were the dominant contributions for the PAHs in sewage sludge. The concentrations of total PCDD/F in the sewage sludge ranged from 330 to 4245 pg/g d.w. The toxicity equivalent concentrations is between 3.47-88.24 pg I-TEQ according to NATO/CCMS, which is below Chinese legislation limit value proposed for land application. The PCDD/F congener/homologue profiles found in the Beijing samples indicated that the high chlorinated PCDD/F contamination might originate mainly from PCP-related source and depositional sources while the low chlorinated PCDD/F homologues could be originating from incineration or coal combustion. The major source of PCDD/Fs in Beijing sludge is still unclear.     

Changes in sewage sludge carbon forms along a treatment stream

The behaviour and fate of macronutrients and pollutants in sewage sludge applied to the land are affected by the chemical composition of the sludge organic matter, which in turn is influenced by both sewage source and by sewage treatment processes. In this study, (13)C nuclear magnetic resonance (NMR) spectroscopy was used to characterise the organic matter of sludges collected at three different points along the treatment stream of a municipal sewage works with a domestic catchment. Sludge at the first point, an undigested liquid (UL) sludge, had a substantially different composition to the anaerobically digested (AD) and dewatered sludge cake (DC) materials, which were similar to each other. In particular, the UL sludge contained more alkyl C than the AD or DC sludges. All three sludges were found to contain mobile alkyl C that is poorly observed using the cross polarisation (CP) technique, necessitating the use of the less sensitive, but more quantitatively reliable direct polarisation (DP) technique to obtain accurate distributions of C types.     

三峡库区垃圾渗滤液-城镇污水合并处理时的重金属含量研究

应用微波消解-电感耦合等离子体发射光谱法（ICP-OES）测定三峡库区垃圾渗滤液、渗滤液城镇污水合并处理厂进、出水以及剩余污泥中重金属元素的浓度。结果表明，合并处理后，除5个污水厂出水Ni超标（浓度为59.79～104.30 μg/L）外，其余重金属元素均低于GB 18918-2002污水排放标准；剩余污泥中的总重金属含量在15.31～27.73 g/kg之间，各元素含量均远低于污泥农用标准。因此，在目前各合并处理厂的运行条件下，控制渗滤液与城镇污水比例在1∶2 700～1∶50（V/V）范围内，渗滤液汇入生活污水进行合并处理是解决渗滤液重金属污染的有效方式。     

Effect of Solids Concentration on Bacterial Leaching of Heavy Metals from Sewage Sludge

Abstract

Microbial metal leaching from sewage sludge (2-9% w/v) was carried out with the iron-oxidizing bacterium Thiobacillus ferrooxidans. Measurements of pH, oxidation-reduction potential, and concentration of Fe²⁺ indicated that T. ferrooxidans was effective in removing metals from an incubation bath containing less than 5% sludge solids concentration. Specifically, Cu leaching was completely suppressed at a high solids concentration of 9% (w/v). Results indicated that the deactivation of T. ferrooxidans at a high sludge content was mainly due to the presence of inhibiting materials such as organic matter. A mixed culture of sulfur-oxidizing bacteria was obtained by enrichment from anaerobically digested sewage sludge to enhance the efficiency of the microbial leaching process. These bacteria were much more effective in metal leaching than was iron-oxidizing T. ferrooxidans. At 9% (w/v) solids concentration, the leaching efficiencies of Zn and Cu were 78% (2.66 g/kg dry sludge) and 59% (1.36 g/kg dry sludge), respectively. Therefore, when removing heavy metals from the anaerobically digested sewage sludge, the indigenous sulfur-oxidizing bacteria isolated in the current study were more efficient than T. ferrooxidans, especially at high sludge solids concentrations.     

PAH removal from spiked municipal wastewater sewage sludge using biological, chemical and electrochemical treatments

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied due to their presence in all the environmental media and toxicity to life. These molecules are strongly adsorbed on the particulate matters of soils, sludges or sediments because of their strong hydrophobicity which makes them less bioavailability, thus limiting their bioremediation. Different sludge treatment processes were tested to evaluate their performances for PAH removal from sludge prealably doped with 11 PAHs (5.5mg each PAH kg(-1) of dry matter (DM)): two biological processes (mesophilic aerobic digestion (MAD) and simultaneous sewage sludge digestion and metal leaching (METIX-BS)) were tested to evaluate PAH biodegradation in sewage sludge. In parallel, two chemical processes (quite similar Fenton processes: chemical metal leaching (METIX-AC) and chemical stabilization (STABIOX)) and one electrochemical process (electrochemical stabilization (ELECSTAB)) were tested to measure PAH removal by these oxidative processes. Moreover, PAH solubilisation from sludge by addition of a nonionic surfactant Tween 80 (Tw80) was also tested. The best yields of PAH removal were obtained by MAD and METIX-BS with more than 95% 3-ring PAH removal after a 21-day treatment period. Tw80 addition during MAD treatment increased 4-ring PAHs removal rate. In addition, more than 45% of 3-ring PAHs were removed from sludge by METIX-AC and during ELECSTAB process were quiet good with approximately 62% of 3-ring PAHs removal. However, little weaker removal of 3-ring PAHs (<35%) by STABIOX. None of the tested processes were efficient for the elimination of high molecular weight (> or = 5-ring) PAHs from sludge.     

Removal of DEHP in composting and aeration of sewage sludge

The potential of composting and aeration to remove bis(2-ethylhexyl) phthalate (DEHP) from municipal sewage sludge was studied with two dewatered sludges: raw sludge and anaerobically digested sludge. Composting removed 58% of the DEHP content of the raw sludge and 34% of that of the anaerobically digested sludge during 85 days stabilisation in compost bins. A similar removal for the anaerobically digested sludge was achieved in a rotary drum in 28 days. Less than 1% of DEHP was removed with the compost leachate. Although DEHP removal was greater from raw sludge compost than anaerobically digested sludge compost, the total and volatile solids removals were on the same level in the two composts. In the aeration of raw sludge at 20 degrees C the DEHP removals were 33-41% and 50-62% in 7 and 28 days, respectively. Both composting and aeration are concluded to have the potential to reduce the DEHP contents typically found in sewage sludges to levels acceptable for agricultural use.     

Hybrid process for heavy metal removal from wastewater sludge.

Bioleaching processes have been demonstrated to be effective technologies in removing heavy metals from wastewater sludge, but long hydraulic retention times are typically required to operate these bioprocesses. A hybrid process (coupling biological and chemical processes) has been explored in laboratory pilot-scale experiments for heavy metals (cadmium [Cd], copper [Cu], chromium [Cr], and zinc [Zn]) removal from three types of sludge (primary sludge, secondary activated sludge, and a mixture of primary and secondary sludge). The hybrid process consisted of producing a concentrate ferric ion solution followed by chemical treatment of sludges. Ferric iron solution was produced biologically via oxidation of ferrous iron by A. ferrooxidans in a continuous-flow stirred tank (5.2 L) reactor (CSTR). Wastewater sludge filtrate (WSF) containing nutrients (phosphorus and nitrogen) has been used as culture media to support the growth and activity of indigenous iron-oxidizing bacteria. Results showed that total organic carbon (TOC) concentrations of the culture media in excess of 235 mg/L were found to be inhibitory to bacterial growth. The oxidation rate increased as ferrous iron concentrations ranged from 10 to 40 g Fe2+/L. The percentage of ferrous iron (Fe2+) oxidized to ferric iron (Fe3+) increased as the hydraulic retention time (HRT) increased from 12 to 48 h. Successful and complete Fe2+ oxidation was recorded at a HRT of 48 h using 10 g Fe2+/L. Subsequently, ferric ion solution produced by A. ferrooxidans in sludge filtrate was used to solubilize heavy metals contained in wastewater sludge. The best solubilization was obtained with a mixture of primary and secondary sludge, demonstrating a removal efficiency of 63, 71, 49, and 80% for Cd, Cu, Cr, and Zn, respectively.     

Occurrence of organic contaminants in sewage sludges from eleven wastewater treatment plants, China

This study presents the occurrence of 43 semi-volatile organic compounds (SVOCs) listed as priority pollutants by both China and the United States Environmental Protection Agency, in sewage sludges collected from eleven wastewater treatment plants (WWTPs) of mainland and Hong Kong, China. Thirty-six SVOCs were detected by gas chromatography coupled with mass spectrometer (GC-MS) and at least 14 in each sample. The most abundant compounds were phthalic acid esters (PAEs) and polycyclic aromatic hydrocarbons (PAHs) with total concentrations ranging from 10 to 114mgkg(-1) dry weight (d.w.) (with a mean of 30mgkg(-1) d.w.) and from 1.4 to 33mgkg(-1)d.w. (with a mean of 16mgkg(-1) d.w.), respectively, followed by chlorobenzenes, nitroaromatics, haloethers and halogenated hydrocarbons which occurred generally at concentrations lower than 10mgkg(-1) d.w. Large variations were observed between the concentrations of individual compounds as well as their total concentrations in sludge samples from different WWTPs. The highest values of sum concentration of 16 PAHs and of 6 PAEs were found in sewage sludge from Beijing. The mean total concentration of each class of SVOCs in sewage sludge from mainland was remarkably higher than that from Hong Kong. The concentrations of di(2-ethylhexyl) phthalate in 91% sludge samples met the limit (100mgkg(-1)d.w.) proposed by the Europe Union for land application, whereas the PAH concentrations of 64% sludge samples exceeded the maximum permissible concentration (6.0mgkg(-1)d.w.). The occurrence of SVOCs in this study are compared with other studies and their sources are discussed.     

Effects of past sewage sludge additions on heavy metal availability in light textured soils: implications for crop yields and metal uptakes

The effect of heavy metal additions in past sewage sludge applications on soil metal availability and the growth and yield of crops was evaluated at two sites in the UK. At Gleadthorpe, sewage sludges enriched with salts of zinc (Zn), copper (Cu) and nickel (Ni) had been applied to a loamy sand in 1982 and additionally naturally contaminated Zn and Cu sludge cakes in 1986. At Rosemaund, sewage sludges naturally contaminated with Zn, Cu, Ni and chromium (Cr) had been applied in 1968-1971 to a sandy loam. From 1994 to 1997, the yields of both cereals and legumes at Gleadthorpe were up to 3 t/ha lower than the no-sludge control where total topsoil Zn and Cu concentrations exceeded 200 and 120 mg/kg, respectively, but only when topsoil ammonium nitrate extractable metal levels also exceeded 40 mg/kg Zn and 0.9 mg/kg Cu. At Rosemaund, yields were only decreased where total topsoil Cu concentrations exceeded 220 mg/kg or 0.7 mg/kg ammonium nitrate extractable Cu. These results demonstrate the importance of measuring extractable as well as total heavy metal concentrations in topsoils when assessing likely effects on plant yields and metal uptakes, and setting soil quality criteria.     

Bioavailability and plant accumulation of heavy metals and phosphorus in agricultural soils amended by long-term application of sewage sludge

Amendment of agricultural soils with municipal sewage sludges provides a valuable source of plant nutrients and organic matter. Nevertheless, addition of heavy metals and risks of eutrophication continue to be of concern. Metal behaviour in soils and plant uptake are dependent on the nature of the metal, sludge/soil physico-chemical properties and plant species. A pot experiment was carried out to evaluate plant production and heavy metal uptake, soil heavy metal pools and bioavailability, and soil P pools and possible leaching losses, in agricultural soils amended with sewage sludge for at least 10 years (F20) compared to non-amended soils (control). Sewage sludge application increased soil pH, N, Olsen-extractable-P, DOC and exchangeable Ca, Mg and K concentrations. Total and EDTA-extractable soil concentrations of Cu and Zn were also significantly greater in F20, and soil metal (Cu, Mn and Zn) and P fractionation altered. Compared to the control, in F20 relative amounts of acid-extractable (Mn, Zn), reducible (Mn, Zn) and oxidisable (Cu, Zn) metal fractions were greater, and a dominance of inorganic P forms was observed. Analyses of F20 soil solutions highlighted risks of PO4 and Cu leaching. However, despite the observed increases in metal bioavailability sewage sludge applications did not lead to an increase in plant shoot concentrations (in wild plants or crop species). On the contrary, depending on the plant species, Mn and Zn tissue concentrations were within the deficiency level for most plants.     

Influence of ozone pre-treatment on sludge anaerobic digestion: removal of pharmaceutical and personal care products

The effect of an oxidative pre-treatment with ozone on the removal of Pharmaceutical and Personal Care Products (PPCPs) during the anaerobic digestion of sewage sludge has been investigated. Besides, the digested sludge characteristics in terms of pathogens content, dewatering properties, heavy metals content and linear alkylbenzene sulfonates (LAS) were determined. During ozonation (20mg O(3)/g TSS), about 8% of volatile solids (VS) and 60% of the chemical oxygen demand (COD) were solubilized. However, no mineralization was observed. The elimination of VS and total COD during anaerobic digestion were not affected by ozone treatment with efficiencies ranging from 60% to 65%. All PPCPs considered were removed during anaerobic treatment of sludge, with efficiencies ranging from 20% to 99%. No significant influence of ozone pre-treatment was observed on PPCPs elimination except for carbamazepine. Pathogens, heavy metals and LAS contents after conventional and pre-ozonation treatment of sewage sludge were below the legal requirements. However, the dewatering properties of sludge were deteriorated when the ozone pre-treatment was applied.     

Persistence of polycyclic aromatic hydrocarbons (PAHs) in sewage sludge-amended soil

The application of sewage sludge as a fertilizer is a common method used to improve soil properties. However, sewage sludge may contain various organic pollutants including polycyclic aromatic hydrocarbons. In the present study, the persistence of PAHs in soils fertilized with different sewage sludge doses was compared in relation to the sewage sludge dose applied (30, 75, 150, 300 and 600 Mgha(-1)) and the content of the polycyclic aromatic hydrocarbons in them. The experiment was carried out in two blocks of experimental plots divided according to the type of plants grown: field plants and perennial-willow. Sewage sludge addition to soils resulted in an increase in the content of polycyclic aromatic hydrocarbons in these soils. This increase was proportional to the quantity of sewage sludge applied. The results obtained showed that during a 42/54-month period, more than half of the individual PAHs introduced into the soil with sewage sludge were degraded. The scope of dissipation depended on the sewage sludge dose and the use to which the area was put. In the experiment with the willow only in the case of the highest sludge dose was a decrease in the PAH content above 50% noted; whereas in the case of the experiment with the field plants, it was higher by 50% for all sewage sludge doses. In experiment with field plants the highest scope of individual PAH disappearance was observed in the soil with the sewage sludge dose amounting to 300 Mgha(-1). In experiment with willow a relatively high dissipation of individual PAHs (>50%) was found in the treatment with the highest sludge dose (600 Mgha(-1)). A wider PAH dissipation range in the experiment with field plants was conditioned by the more favourable conditions created as a result of the breeding treatments applied. Agrotechnical treatments clearly increased the disappearance of the PAHs in those soils fertilized with the lowest sewage sludge doses (30 and 75 Mgha(-1)). The results obtained showed that the preferred method of treating a light soil fertilised with sewage sludges should be a one-year system, with a sludge application of 75 Mgha(-1).