Deep soil compaction as a method of ground improvement and to stabilization of wastes and slopes with danger of liquefaction, determining the modulus of deformation and shear strength parameters of loose rock

For the stabilization of dumps with the construction of hidden dams and for building ground improvement, for instance for traffic lines over dumps, nearly all applied compaction methods have the aim to reduce the pore volume in the loose rock. With these methods, a homogenization of the compacted loose rock will be obtained too. The compaction methods of weight compaction by falling weight, compaction by vibration and compaction by blasting have been introduced, and their applications and efficiencies have been shown. For the estimation of the effective depth of the compaction and for a safe planning of the bearing layer, respectively, the necessary material parameters have to be determined for each deep compaction method. Proposals for the determination of these parameters have been made within this paper. In connection with the stabilization of flow-slide-prone dump slopes, as well as for the improvement of dump areas for the use as building ground, it is necessary to assess the deformation behavior and the bearing capacity. To assess the resulting building ground improvement, deformation indexes (assessment of the flow-prone layer) and strength indexes (assessment of the bearing capacity) have to be determined with soil mechanical tests. F?rster and Lersow, [Patentschrift DE 197 17 988. Verfahren, auf der Grundlage last- und/oder weggesteuerter Plattendruckversuche auf der Bohrlochsohle, zur Ermittlung des Spannungs-Verformungs-Verhaltens und/oder von Deformationsmoduln und/oder von Festigkeitseigenschaften in verschiedenen Tiefen insbesondere von Lockergesteinen und von Deponiek?rpern in situ; F?rster W, Lersow M. Plattendruckversuch auf der Bohrlochsohle, Ermittlung des Spannungs-Verformungs-Verhaltens von Lockergestein und Deponiematerial Braunkohle--Surface Mining, 1998;50(4): 369-77; Lersow M. Verfahren zur Ermittlung von Scherfestigkeitsparametern von Lockergestein und Deponiematerial aus Plattendruckversuchen auf der Bohrlochsohle. Braunkohle--Surface Mining, 1995;51(1):39-47] improved a direct procedure, the so-called plate-loading test. With this improved procedure, it is possible to produce profiles of deformation parameters and shear-strength parameters of the loose rock. On this basis the settlement behavior and the bearing behavior of the ground can be described. The PDV-BS cone-penetration test and the pressiometer test are compared and the reliability of the soil mechanical indexes are assessed critically. The PDV-BS can be used as a calibration test for cone penetration tests as well as for the calibration of pressiometer tests. With the application of a PDV-BS and a pressiometer test in combination in a testing field, the anisotropy properties of the loose rock can be proved.     

Direct and Indirect Effects of Soil Pollution by Lignite Mining

Lignite mining and processing has caused a pronounced impact both directly and indirectly on soils and ecosystems across large areas of the former GDR. We studied soils of pine forest ecosystems at sites affected by severe alkaline dust and sulphur deposition, stemming from lignite fired power plant emission, and at dumped sites from lignite mining. In this paper we summarize our main results and evaluate the long-term impact of lignite mining and combustion on the environment. The pine ecosystems on naturally developed soils show a clear effect of deposition history along a former deposition gradient with distinct changes in chemical properties of organic surface layers and mineral soil as well as in element turnover and cycling rates. Afforested sites on mining dumps are directly affected by the composition of the dumped substrates. Over a large area (800 km²) these substrates are dominated by Tertiary sediments with varying amounts of lignitic particles and pyrite that result in phytotoxic site conditions (pH < 3, high salt and metal contents). High amelioration doses of liming material (up to 200 t ha⁻¹) were applied for restoration purposes. We studied the development of these sites over a period of 60 years using a false-time series approach. Beside the extreme soil conditions, element budgets of these sites are characterized by very high element release rates over decades caused by pyrite oxidation and primary mineral weathering.     

Development of a database of landfills and dump sites in Asian countries

This article briefly summarizes the limited landfill/dump information available for developing Asian countries, and introduces a database that aims to close the information gap through collecting and sharing data. Developing nations usually try to adapt the systems and technologies of developed countries. However, this approach may not be appropriate because of differences in socioeconomic, cultural, and political backgrounds. Many waste management projects fail after operations are transferred to local authorities owing to a lack of funds to cover the high operational expenses. Some successful projects have been adapted to local conditions, although the information on these successes is not often available for others. Nevertheless, only a few developing countries even have a national inventory of their dumps/landfills, and decision-makers have little awareness of the dumps and their impacts. The database introduced here will gather landfill/dump information from each country and organize it in a comparable format, and it will then be published on the Internet.     

Slope failures in municipal solid waste dumps and landfills: a review

Between 1977 and 2005 six large-scale failures of municipal solid waste dumps and landfills have been recorded in the technical literature. The volumes of waste mobilized in the failures varied from 10-12 000 m(3) in a failure that killed nearly 300 people to 1.5 million m(3) in a failure that caused no deaths or injuries. Of the six failures, four occurred in dumps that, as far as is known, had not been subjected to any prior technical investigation of their shear stability. The remaining two failures occurred in engineer-designed landfills, one of which practised leachate recirculation, and the other co-disposed of liquid waste along with solid waste. The paper reviews, describes and analyses the failures and summarizes their causes.     

Characterisation of Organic Matter and Carbon Cycling in Rehabilitated Lignite-rich Mine Soils

Open-cast lignite mining in the Lusatian mining district resulted in rehabilitated mine soils containing up to four organic matter types: (1) recent plant litter, (2) lignite deposited by mining activity, (3) carbonaceous ash particles deposited during amelioration of the lignite-containing parent substrate and (4) airborne carbonaceous particles deposited during contamination. The influence of lignite-derived carbon types on the organic matter development and their role in the soil carbon cycle was unknown. This paper presents the findings obtained during a six year project concerning the impact of lignite on soil organic matter composition and the biogeochemical functioning of the ecosystem. The organic matter development after rehabilitation was followed in a chronosequence of rehabilitated mine soils afforested in 1966, 1981 and 1987. A differentiation of the organic matter types and an evaluation of their role within the ecosystem was achieved by the use of ¹⁴C activity measurements, ¹³C CPMAS NMR spectroscopy and wet chemical analysis of plant litter compounds. The results showed that the amount and degree of decomposition of the recent organic matter derived from plant material of the 30 year old mine soil was similar to natural uncontaminated forest soil which suggests complete rehabilitation of the ecosystem. The decomposition and humification processes were not influenced by the presence of lignite. On the other hand it was shown that lignite, which was thought to be recalcitrant because of its chemical structure, was part of the carbon cycle in these soils. This demonstrates the need to elucidate further the stabilisation mechanisms of organic matter in soils.     

Predicting the mobility of Zn, Fe, Cu, Pb, Cd from roasted sulfide (pyrite) residues—A case study of wastes from the sulfuric acid industry in Sweden

Leachates from roasted sulfide residues, which are the wastes from the production of sulfuric acid at Falun, Sweden, have low pH and high concentrations of Zn, Fe, and SO₄. The minerals are mainly hematite and maghemite and, because the various sulfides in the feed behave differently during the roasting process, the residual sulfides minerals are pyrrhotite and sphalerite. Oxidation of the residual sulfides contributes acidity, Zn, Fe, Cu, Cd, and sulfate to the effluents from the waste deposits. The dissolution of sphalerite is most likely accelerated in acid solution rich in Fe (III). The formation of Pb-sulfate coatings on galena may provides an armoring effect which slows the oxidation of the galena. Residual sulfides are source phases controlling long-term contaminant release. Other source minerals for Zn, Fe, Pb, Cu, Cd and SO₄ in the effluents are iron oxides which retained percentage quantities of SO₄, roast-derived alteration rims of Zn oxides on sphalerite, alterated silicates formed during the roasting process, and secondary minerals (e.g. Zn, Fe, Cu sulfates, iron hydroxides) that were precipitated by in-site oxidation in the waste dumps. The Zn, Fe, and Cu sulfates most likely control short-term changes in the chemistry of the leachate, while Pb concentration in the leachates may be controlled predominantly by Pb-release from the altered silicates. The mineralogical and geochemical data provide fundamental information essential for the remedial management of this type of industial waste.     

水中硫化物测定方法的研究

改进了用于水中硫化物测定的酸化－吹取－吸收预处理方法,对样样预处理条件及校准曲线的制作 进行了详细试验。该方法具有吹取完全,吸收安全、操作简单、准确度高的优点,适用于水和废水中微量硫化物的测定。     

Metal fractionation in soil profiles at automobile mechanic waste dumps.

Soil profiles at five automobile mechanic waste dumps in Port-Harcourt, Nigeria were investigated to assess the spatial distribution, chemical speciation, and likely mobility of Cd, Cu, Pb, Zn, Cr and Ni in the soil as a function of the soil properties. A sequential fractionation protocol was used that generated six different fractions into which soil metal could partition. Cadmium was associated with non-residual fractions at surface horizons, but at lower depths it was in the residual fractions. Copper and Cr partitioned into organic and residual fractions, while Pb was associated with an Fe-Mn oxide fraction and the residual fractions. Zinc in surface horizons partitioned into an Fe-Mn oxide fraction and a fraction that captured carbonate-bound species, but in subsurface horizons, it was mainly in the residual fractions. Ni was predominantly found in the residual fractions. Mobility factors were calculated, and their values tended to decrease with increasing profile depth, indicating that these metals are relatively mobile in the surface horizons compared the subsurface except for chromium in the 15-30 cm depths. The mobility factors for the heavy metals follow the order: Cd > Zn > Pb > Cu > Cr > Ni. The results suggest that there is serious contamination hazard with Cd, Pb, and Zn in the soil profiles.     

Immobilized microbe bioreactors for waste water treatment

The application of adapted microbial populations immobilized on a porous diatomaceous earth carrier to pre-treat and reduce toxic concentration of volatile organics, pesticides, petroleum aliphatics and aromatics has been demonstrated for several industrial sites. In the pre-treatment of industrial effluents and contaminated ground-waters, these bioreactors have been used to optimize and reduce the cost of conventional treatment systems, i.e. steam stripping, carbon adsorption and traditional biotreatment. Additionally, these systems have been employed as seeding devices for larger biotreatment systems. The cost effective utilization of an immobilized microbe reactor system for water supply regeneration in a microgravity environment is presented. The feasibility of using immobilized biomass reactors as an effluent treatment technology for the biotransformation and biodegradation of phenols, chlorinated halocarbons, residual oils and lubricants was evaluated. Primary biotransformation tests of two benchmark toxicants, phenol and ethylene dichloride at concentrations expected in life support effluents were conducted. Biocatalyst supports were evaluated for colonization potential, surface and structural integrity, and performance in continuous flow bioreactors. The implementation of such approaches in space will be outlined and specific areas for interfacing with other non-biological treatment approaches will be considered for advanced life support, tertiary waste water biotreatment.     

Successfully applying sparging technologies

Air sparging is an innovative methodology for remediating organic compounds present in contaminated, saturated soil zones. In the application of the technology, sparging (injection) wells are used to inject a hydrocarbon-free gaseous medium (typically air) into the saturated zone below or within the areas of contamination. Two major mechanisms of remediation are engaged/enhanced due to the sparging process. First, volatile organic compounds are dissolved in the groundwater and sorbed on the soil partition into the advective air phase, effectively simulating an in-situ air stripping system. The stripped contaminants are transported in the air phase to the vadose zone, generally within the radius of influence of a standard vapor extraction and vapor treatment system. Second, with optimal environmental conditions, volatile and semivolatile organic compounds may be biodegraded by utilizing the sparging process to oxygenate the groundwater, thereby enhancing the growth and activity of the indigenous bacterial community. Air sparging is a complex multifluid phase process which has been applied successfully in Europe since the mid-1980s. Major design considerations include site geology, contaminant type, gas injection pressures and flow rates, injection interval (areal and vertical), and site-specific biofeasibility parameters. Site-specific geology and biofeasibility are the dominant design parameters. Pilot testing and full-scale design considerations should also be addressed. Mathematical models have been developed to simulate the air flow field during the sparging process and to examine the limitations imposed by site geology. Correct design and operation of this technology have been demonstrated to achieve groundwater cleanup to low part-per-billion contaminant levels. Incorrect design and operation can introduce significant pollution liability through undesirable contaminant migration in both the dissolved and vapor phases.     

Open dumps in the Hellenic prefecture of Laconia: statistical analysis of characteristics and restoration prioritization on the basis of a field survey.

This study presents an assessment of the current status of open dumps in Laconia prefecture of Peloponnese in southern Greece, where all open dumps are targeted for closure by 2008. An extensive field survey was conducted in 2005 to register existing sites in the prefecture. The data collected included the site area and age, waste depth, type of disposed waste, distance from nearest populated area, local geographical features and observed practices of open burning and soil coverage. On the basis of the collected data, a GIS database was developed, and the above parameters were statistically analysed. Subsequently, a decision tool for the restoration of open dumps was implemented, which led to the prioritization of site restorations and specific decisions about appropriate restoration steps for each site. The sites requiring restoration were then further classified using Principal Component Analysis, in order to categorize them into groups suitable for similar restoration work, thus facilitating fund allocation and subsequent restoration project management.     

Soil properties and water regime of reclaimed surface dumps in the North Bohemian brown-coal region--a field study

This paper attempts to characterise the water regime of reclaimed surface dumps in connection with their soil physical properties. The results of a research project based on field measurements of moisture content and hydraulic conductivity, supported by analyses of undisturbed soil samples, led to recommendations regarding technological procedures for such dumps. A dielectric soil moisture meter, in an improved version, was successfully used for field monitoring and further evaluation of moisture content. Hydraulic conductivity was also measured in the field (by repeated borehole infiltration) using the Guelph permeameter method. Laplace-Gardner analysis was used for evaluating the field saturated hydraulic conductivity results.     

A historical context of municipal solid waste management in the United States.

Municipal solid waste management (MSWM) in the United States is a system comprised of regulatory, administrative, market, technology, and social subcomponents, and can only be understood in the context of its historical evolution. American cities lacked organized public works for street cleaning, refuse collection, water treatment, and human waste removal until the early 1800s. Recurrent epidemics forced efforts to improve public health and the environment. The belief in anticontagionism led to the construction of water treatment and sewerage works during the nineteenth century, by sanitary engineers working for regional public health authorities. This infrastructure was capital intensive and required regional institutions to finance and administer it. By the time attention turned to solid waste management in the 1880s, funding was not available for a regional infrastructure. Thus, solid waste management was established as a local responsibility, centred on nearby municipal dumps. George Waring of New York City organized solid waste management around engineering unit operations; including street sweeping, refuse collection, transportation, resource recovery and disposal. This approach was adopted nationwide, and was managed by City Departments of Sanitation. Innovations such as the introduction of trucks, motorized street sweepers, incineration, and sanitary landfill were developed in the following decades. The Resource Conservation and Recovery Act of 1976 (RCRA), is the defining legislation for MSWM practice in America today. It forced the closure of open dumps nationwide, and required regional planning for MSWM. The closure of municipal dumps caused a 'garbage crisis' in the late 1980s and early 1990s. Private companies assumed an expanded role in MSWM through regional facilities that required the transportation of MSW across state lines. These transboundary movements of MSW created the issue of flow control, in which the US Supreme Court affirmed the protection of garbage under the Commerce Clause of the Constitution. Thus MSWM in America today is largely managed by municipalities, and operated by a relatively small number of private companies. It consists of a mixture of landfill, incineration, recycling, and composting, and is regulated under RCRA, the Clean Air Act and other related federal and state laws.     

Characterization of iron elution for seaweed bed restoration using a steelmaking slag and compost method

Coastal areas in Japan and other parts of the world have serious problems with barren grounds. A method has been developed that uses a mixture of steelmaking slag and compost including humic substances supplied in seawater, for restoring seaweed beds. The effects of this method have been previously confirmed in field tests. It was found that the mixture of steelmaking slag and compost was effective for extending the lifetime of iron elution as well as increasing iron concentrations in seawater. In this study, the effect of the mixing composts with steelmaking slag was evaluated additionally for increasing dissolved iron concentrations in seawater. The characteristics of iron elution were also studied using this method. In particular, the mechanism of Fe elution and dissolved Fe oxidation was examined in detail. The iron elution of actual seawaters was tested using three kinds of samples which involved steelmaking slag, compost, and a mixture of steelmaking slag and compost. These samples were used to understand the mechanism of Fe elution and oxidation in seawater. It was found that the mixture of steelmaking slag and compost was the most effective, which also confirmed the validity of the proposed Fe elution process in seawater.     

The Assessment of Atmospheric Pollution using Satellite Remote Sensing Technology in Large Cities in the Vicinity of Airports

This paper investigates the potential of usingsatellite remotely sensed imagery for assessing atmosphericpollution. A novel approach, which comprised radiativetransfer calculations and pseudo-invariant targets fordetermining aerosol optical thickness has been developed.The key parameter for assessing atmospheric pollution inphotochemical air pollution studies is the aerosol opticalthickness. The need for identifying suitable pseudo-invariantobjects in satellite images of urban areas is of great interest for increasing the potential of earthobservation for monitoring air pollution in such areas. Theidentification of large water bodies and concrete apronsthat can serve as suitable dark and bright targetsrespectively in different geographical areas wasdemonstrated in this study. This study added evidence onthe correlation found between the visibility valuesmeasured at Heathrow Airport area during satellite overpassand aerosol optical thickness derived from Landsat-5 TMband 1 images.     

Novel Mercury Oxidant and Sorbent for Mercury Emissions Control from Coal-fired Power Plants

The authors have successfully developed novel efficient and cost-effective sorbent and oxidant for removing mercury from power plant flue gases. These sorbent and oxidant offer great promise for controlling mercury emissions from coal-fired power plants burning a wide range of coals including bituminous, sub-bituminous, and lignite coals. A preliminary analysis from the bench-scale test results shows that this new sorbent will be thermally more stable and cost-effective in comparison with any promoted mercury sorbents currently available in the marketplace. In addition to the sorbent, an excellent elemental mercury (Hg(0)) oxidant has also been developed, and will enable coal-fired power plants equipped with wet scrubbers to simultaneously control their mercury emissions as well as their sulfur oxides emissions. This will work by converting all elemental mercury to an oxidized form which will be removed by the wet scrubber. This will result in significant cost savings for mercury emissions control to the atmosphere, and will help in keeping electric costs low. The sorbent and oxidant will benefit from the utilization of a waste stream from the printed circuit board (PCB) industry, and would thus be environmentally beneficial to both of the utility and electronics industries. The sorbent also demonstrated thermal stability up to 350°C, suggesting a possibility of an application in pulverized coal-fired power plants equipped with hot-side electrostatic precipitators and coal gasification plants.     

Reuse of spent bleaching earth by polymerisation of residual organics

Spent bleaching earth (SBE) is a waste generated by the edible oil industry that currently has limited options for beneficial reuse. In excess of ～2 million tonnes per year of SBE is generated world-wide with major quantities available in the middle-east where significant volumes of edible oils are produced. Low pressure compaction followed by heat treatment at 150 °C causes polymerisation of the residual organic components in SBE and this produces monolithic samples with high unconfined compressive strengths (54 MPa). SBE can therefore be used to manufacture novel clay blocks for use in construction that are bonded by polymerised vegetable oil. This represents a new, innovative and resource efficient application for SBE. In this research, commercial SBE has been characterised and the effects of key processing variables (temperature and compaction pressure) on the compressive strength, porosity and density of the SBE clay blocks are reported and the mechanisms responsible for strength development are discussed.     

Municipal solid waste management strategies in Turkey

Municipal solid waste (MSW) is a major environmental problem in Turkey, as in many developing countries. Problems associated with municipal solid waste are difficult to address, but efforts towards more efficient collection and transportation and environmentally acceptable waste disposal continue in Turkey. Although strict regulations on the management of solid waste are in place, primitive disposal methods such as open dumping and discharge into surface water have been used in various parts of Turkey. This study presents a brief history of the legislative trends in Turkey for MSW management. The study also presents the MSW responsibility and management structure together with the present situation of generation, composition, recycling, and treatment. The results show that approximately 25 million ton of MSW are generated annually in Turkey. About 77% of the population receives MSW services. In spite of efforts to change open dumping areas into sanitary landfills and to build modern recycling and composting facilities, Turkey still has over 2000 open dumps.     

Study of Pollution of the Plitvice Lakes by Water and Sediment Analyses

The process of eutrophication in form of intense plant growth has been observed in some lakes and water streams at the Plitvice Lakes National Park in central Croatia. Here we investigate whether this phenomenon is a consequence of anthropogenic pollution or due to naturally produced organic matter in the lakes. We applied chemical analysis of water at two springs and four lakes (nutrients, dissolved organic carbon (DOC), trace elements) and measurements of surface lake sediments (mineral and organic fraction analyses, trace elements) in four different lakes/five sites. The chemical composition of water does not indicate recent anthropogenic pollution of water because the concentrations of most trace elements are below detection limits. The concentrations of DOC and nutrients are slightly higher in the area of increased eutrophication-plant growth. Also the content of organic matter in the sediment is at the highest level in areas with highest C/N ratio indicating that the organic fraction of this sediment is mainly of terrestrial origin. There is no significant difference among the trace element concentration in the upper segment of all cores, deposited approximately during last 50 years when higher anthropogenic influence is expected due to development and touristic activity, and the lower part of the cores, corresponding to the period approximately 100–200 years before present. The content of trace elements and organic matter in sediments decreases from the uppermost lake downstream. According to our results there is no indication of recent anthropogenic pollution in water and sediment. Higher concentrations of DOC in water as well as phosphorus and some other elements in the lake sediment can be a consequence of input of natural organic matter to the lake water.