加压溶氧光催化反应器降解活性艳红X-3B

探讨了加压溶氧条件对活性艳红X-3B的降解与脱色的作用,考察了加压条件下pH值,TiO2投加量及温度等对活性艳红X-3B降解的影响.结果表明,加压条件与常压条件下变化趋势基本一致.加压充氧有助于活性艳红X-3B的降解与脱色,加压充N2对反应基本没有作用,说明增加活度不是关键因素,加压使溶液中溶解氧增加是导致活性艳红X-3B降解与脱色的主要原因.光催化降解过程,发色基团最易被打碎,60min内降解效果显著,而萘环和苯环降解效果不十分明显.CODCr的降解与色度的褪除成正相关,脱色率越高,COD的降解率也越高.     

零价铁还原降解活性染料

在分别通氮气,不通氮气和曝气的情况下,在水溶液中用零价铁还原降解活性染料。实验发现：在不同的氛围中,活性染料的降解程度不同,其降解程度为：暴气〉不通氮气〉通氮气。在不同通氮 和曝气的条件下,活性染料的降解过程中有黄色絮状沉淀生成,经红外光谱鉴定为三聚氯氰的取代产物。     

Degradation of azo dye reactive violet 5 by TiO2 photocatalysis

The photocatalytic degradation of hydrolyzed reactive violet 5 (RV5) using titanium dioxide (TiO₂) was investigated in this study. The effects of various factors including the amount of photocatalyst, RV5 concentration, light intensity, and pH on photocatalytic degradation were evaluated. The photodegradation efficiency was 90% after 20 min of irradiation and reached nearly 100% after 80 min under the condition of pH 4 and temperature of 25°C. The decolorization rate typically followed first-order reaction, and increased markedly with increasing amount of photocatalyst, pH as well as light intensity. The total mineralization, based on total organic carbon (TOC) concentration was 53% after 20 min of UV light exposure and approached nearly 100% after 140 min. The final mineralization product was formylformamide. The photodegradation was faster than the mineralization, indicating that the intermediate products of decolorization were resistant to photodegradation. In this study, we found that toxicity of RV5 significantly decreased after decolorization. Our study suggests that the photocatalytic degradation treatment of RV5 with TiO₂ in wastewater is a simple and fast method.     

Enhancement of photocatalytic performance in sonochemical synthesized ZnO–rGO nanocomposites owing to effective interfacial interaction

Nanocomposites composed of two or more components with desirable performance have attracted tremendous attention, mainly due to the synergic effect between the components. The effective combination of ZnO and reduced graphene oxide would lead to ameliorate the photocatalytic performance. To enhance applicability of semiconductor photocatalytic, the composites used should be good interfacial contact governed by suitable particle size distribution. Herein we aim to fabricate the different crystallize size of ZnO nanoparticles (NPs) in ZnO–reduced graphene oxide (ZnO–rGO) nanocomposites by sonochemical synthesis and subsequent facile drying treatment method. The Zn precursor, Zn(Ac)₂, with a plenty of functional groups, was used as a starting source for both reduction of graphene oxide and formation of ZnO on rGO sheets through chemical bonds without the addition of hazardous reducing agents. LiOH was chosen as an assistive reagent to enhance the complete reaction between Zn(Ac)₂ and GO in the formation of ZnO–rGO nanocomposites. More remarkably, drying condition has the great influence on the crystallize size of ZnO NPs in as-prepared ZnO–rGO nanocomposites. It is found that ZnO–rGO nanocomposites dried at ?50 °C (freeze drying) show the highest photocatalytic efficiency in the degradation of rhodamine B (RhB) as compared to ZnO–rGO nanocomposites by other drying conditions under visible-light irradiation. Correlating the crystallize size obtained by different drying temperatures with the photocatalytic activity, it is probed that the smaller crystallize size in ZnO–rGO nanocomposites enhances the interfacial contact and a chemical bonding between rGO and ZnO NPs leading to the effective separation of electrons and holes. In addition, the O ₂ ^·? anion was determined to be the main active oxidant by free radicals trapping experiment and a photodegradation mechanism of ZnO–rGO nanocomposites over rhodamine B (RhB) was proposed based on our observations.     

Photodegradation of an azo dye by silver-doped nano-particulate titanium dioxide

The synthesis of silver doped nano-particulate titanium dioxide (Ag/TiO₂) using a microemulsion method and an investigation of its photocatalytic activity for the degradation of Acid Red 27 in distilled water under UV-irradiation is reported. The prepared Ag/TiO₂ is characterized using transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy. The size of the Ag nanoparticles is around 5–15?nm, with almost uniform distribution on the TiO₂ particles. The efficiency of the photocatalytic process is evaluated to establish the optimum conditions, found to be at 2?wt% of Ag loading on TiO₂, catalyst dosage of 400?mg?L^?1, and calcination temperature of 300°C. Complete decolorization of the dye solution on Ag/TiO₂ was observed in 20?min of UV irradiation in the optimum conditions.     

Efficient photocatalytic degradation of Rhodamine B dye using ZnO/graphitic C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanocomposites synthesized by microwave

Semiconductor photocatalysis is a solution to issues of environmental pollution and energy shortage because photocatalysis can use solar energy to degrade pollutants. The photocatalytic activity can be improved by using composites of ZnO and other semiconductors. Here, composites of ZnO and polymeric graphite-like C₃N₄ (g-C₃N₄) with high photocatalytic activities were prepared by microwave synthesis. Products were characterized by X-ray diffraction, transmission electron microscopy, ultraviolet–visible and Fourier transform infrared spectroscopy. The photocatalytic degradation of Rhodamine B was tested under irradiation from a Xe lamp. Results show that adding graphite-like C₃N₄ promotes the photocatalytic activity of ZnO. Composites with 1.0 wt% g-C₃N₄ showed the best photodegradation efficiency, and the reaction average energy was approximately 33.71 kJ mol^?1.     

Preparation of CuO/SiO<Subscript>2</Subscript> and photocatalytic activity by degradation of methylene blue

A photocatalyst based on CuO/SiO₂ was prepared, and evaluated for the degradation of methylene blue in aqueous medium. The photocatalyst was obtained by calcination method of copper salt, in the presence of silica. The characterization by XRD, FTIR, and TPR techniques confirmed the formation of CuO as active phase. SEM studies showed CuO deposited on the surface of SiO₂. By ESI-MS, it was demonstrated that the degradation of methylene blue occurs through successive hydroxylations. Photodegradation assays showed that CuO/SiO₂ was efficient for degradation, and that the material worked better in the presence of UV light.     

Photocatalytic degradation of phosphamidon using Ag-doped ZnO nanorods

The photocatalytic degradation of the organo-phosphorous pesticide phosphamidon at low concentration in aqueous solution on Ag-doped ZnO nanorods was investigated. Nanosized Ag-doped ZnO rods were synthesized by using a microwave assisted aqueous method. High molecular weight polyvinyl alcohol was used as a stabilizing agent. Composition and structure were investigated using energy-dispersive X-ray spectroscopy (EDAX) and X-ray diffraction (XRD). The XRD pattern reveals that ZnO nanorods are of hexagonal wurtzite structure. The average crystallite size calculated from Scherrer's relation was found to be 30?nm. The effects of catalyst loading, pH value, and initial concentration of phosphamidon on the photocatalytic degradation efficiency using Ag-doped ZnO nanorods as a photocatalyst have been discussed. The results revealed that Ag-doped ZnO nanorods with a diameter of 30?nm showed highest photocatalytic activity at a surface density of 1?g?dm^?3. The catalyst doped with 0.2?mol% Ag is effective for the degradation of phosphamidon with visible light. This opens a new possibility to decompose pesticides that are present in wastewater.     

膨胀石墨对活性艳红X-3B染料的吸附脱色

研究了以膨胀石墨(250 mL/g)为吸附剂,对活性艳红X-3B染料的吸附脱色作用,探讨了影响吸附的因素,结果表明:膨胀石墨对活性艳红X-3B染料的吸附率高,当膨胀石墨用量适当时,低初始浓度、低pH值有利于活性艳红X-3B染料的吸附脱色,温度高低对活性艳红X-3B染料的吸附脱色无明显影响。     

Preparation of effective TiO<Subscript>2</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> photocatalysts for water treatment

Photocatalytic oxidation using semiconductors is one of the advanced oxidation processes for degradation of organic pollutants in water and air. TiO₂ is an excellent photocatalyst that can mineralize a large range of organic pollutants such as pesticides and dyes. The main challenge is to improve the efficiency of the TiO₂ photocatalyst and to extend TiO₂ light absorption spectra to the visible region. A potential solution is to couple TiO₂ with a narrow band gap semiconductor possessing a higher conduction band such as bismuth oxide. Therefore, here we prepared Bi₂O₃/TiO₂ heterojunctions by the impregnation method with different Bi/Ti ratio. The prepared composites have been characterized by UV–Vis diffused reflectance spectra and X-ray diffraction. The photocatalytic activity of the heterojunction has been determined from the degradation of orange II under visible and UV light. Results show that Bi₂O₃/TiO₂ heterojunctions are more effective than pure TiO₂-anatase under UV-A irradiation, with an optimum for the Bi/Ti ratio of 5 %, for the photocatalytic degradation of Orange II. However, the photocatalytic activity under irradiation at λ higher than 420 nm is not much improved. Under UV–visible radiation, the two semiconductors are activated. We propose a mechanism explaining why our products are more effective under UV–visible irradiation. In this case the charge separation is enhanced because a part of photogenerated electrons from the conduction band of TiO₂ will go to the conduction band of bismuth oxide. In this composite, titanium dioxide is the main photocatalyst, while bismuth oxide acts as adsorbent photosensitizer under visible light.     

Photocatalytic degradation of methyl orange using ZnO nanorods

Nanosized ZnO rods were synthesized using a microwave-assisted aqueous method. High molecular weight polyvinyl alcohol was used as a stabilizing agent. Size, surface morphology, and structure were investigated using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). SEM and TEM images show that ZnO nanorods have diameters of about 50?nm and lengths of a few micrometers. The XRD pattern reveals that ZnO nanorods are of hexagonal wurtzite structure. The average crystallite size calculated from Scherrer's relation was found to be 40?nm. The effects of catalyst loading, pH value, and initial concentration of methyl orange on the photocatalytic degradation efficiency using ZnO nanorods as photocatalyst were discussed. The results revealed that ZnO nanorods with a diameter of 50?nm showed the highest photocatalytic activity at a surface density of 0.2?g?dm^?3.     

Solar photocatalytic decomposition of two azo dyes on multi-walled carbon nanotubes (MWCNTs)/TiO<Subscript>2</Subscript> composites

Multi-walled carbon nanotubes (MWCNTs)/TiO₂ composite photocatalysts with high photoactivity were prepared by sol-gel process and further characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and UV-vis absorption spectra. Compared to pure TiO₂, the combination of MWCNTs with titania could cause a significant absorption shift toward the visible region. The photocatalytic performances of the MWCNTs/TiO₂ composite catalysts were evaluated for the decomposition of Reactive light yellow K-6G (K-6G) and Mordant black 7 (MB 7) azo dyes solution under solar light irradiation. The results showed that the addition of MWCNTs enhanced the adsorption and photocatalytic activity of TiO₂ for the degradation of azo dyes K-6G and MB 7. The effect of MWCNTs content, catalyst dosage, pH, and initial dye concentration were examined as operational parameters. The kinetics of photocatalytic degradation of two dyes was found to follow a pseudo-first-order rate law. The photocatalyst was used for seven cycles with photocatalytic degradation efficiency still higher than 98%. A plausible mechanism is also proposed and discussed on the basis of experimental results.     

新型双槽光电化学反应器对活性艳红的降解研究

用热氧化法制备了TiO2/Ti薄膜电极,并用XRD和AFM对TiO2/Ti薄膜电极的晶形和表面形貌进行了表征。结果表明：热氧化法制备的TiO2主要为锐钛型纳米颗粒,直径在40 nm左右。设计了一种新型双槽光电化学反应器,用于废水的处理。以热氧化法制备的TiO2/Ti薄膜电极为阳极进行光电催化反应,同时以石墨电极为阴极用于产生双氧水,并与紫外光组成UV/H2O2体系。考察了双槽反应器中活性艳红X-3B在不同条件下的降解效果。降解结果表明：在新型反应器的阴阳两极槽中,活性艳红不仅在TiO2/Ti阳极槽中被降解,而且在石墨阴极槽中也得到降解;活性艳红在酸性条件下的降解效果最好;相对于单纯的电化学氧化和光催化,光电化学协同作用对X-3B的降解效果最好。     

Solar photocatalytic degradation of the herbicide isoproturon on a Bi–TiO2/zeolite photocatalyst

The photocatalytic degradation of the herbicide isoproturon under solar light was investigated in aqueous solution containing a Bi–TiO₂/zeolite photocatalyst. The catalysts were characterized using X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, Fourier transform-infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The effect of Bi–TiO₂ loading onto the zeolite support and influence of the parameters such as catalyst amount, pH, and initial concentration of isoproturon on the degradation rate were evaluated. The recycling ability of the catalyst was found to be sustainable for elongated periods. The high activity of the Bi–TiO₂/zeolite was attributed to its absorptivity of visible light and its high adsorption capacity for the pollutant molecules.     

Polyoxometalates for photocatalytic degradation of aqueous dyestuff solutions and quantitative structure–property relationship study on photolysis rate constants

Polyoxometalate, K₆TiW₁₁O₃₉Sn·7H₂O (TiW₁₁Sn), was synthesized and characterized. TiW₁₁Sn and K₆ZrW₁₁O₃₉Sn·12H₂O (ZrW₁₁Sn) were evaluated for their photocatalytic degradation of triarylmethane (brilliant green and acid blue 9), bisazo (C.I. reactive black 5), and monoazo dyestuffs (C.I. reactive red 24, C.I. reactive red 194, and C.I. reactive orange 5) with natural sunlight in homogeneous aqueous solutions. TiW₁₁Sn and ZrW₁₁Sn effectively and photocatalytically decolorized the dyestuffs. The TiW₁₁Sn- and ZrW₁₁Sn-mediated photocatalytic degradation of the dyestuffs involved a pseudo-first-order reaction and was modeled by Langmuir–Hinshelwood-type kinetics. The observed pseudo-first-order rate constants (K^/) of triarylmethane dyestuffs were generally bigger than that of the azo dyestuffs. Quantitative structure–property relationship models of the K^/ of the dyestuffs were developed using partial least-square regression. The cumulative variance of the dependent variable explained by the partial least-square components was > 0.753 for each optimal model. This value indicated that the model had good predictive ability and robustness. The K^/ values of the dyestuffs were related to the energy of the lowest unoccupied molecular orbital, and the most positive net atomic charges on a sulfur atom of dyestuffs. The linear correlation coefficients between the predicted and experimental values were all > 0.9950.     

Characterization and performance of V2O5/CeO2 for NH3-SCR of NO at low temperatures

A series of CeO₂ supported V₂O₅ catalysts with various loadings were prepared with different calcination temperatures by the incipient impregnation. The catalysts were evaluated for low temperature selective catalytic reduction (SCR) of NO with ammonia (NH₃). The effects of O₂ and SO₂ on catalytic activity were also studied. The catalysts were characterized by specific surface areas (S_BET) and X-ray diffraction (XRD) methods. The experimental results showed that NO conversion changed significantly with the different V₂O₅ loading and calcination temperature. With the V₂O₅ loading increasing from 0 to 10 wt%, NO conversion increased significantly, but decreased at higher loading. The optimum calcination temperature was 400°C. The best catalyst yielded above 80% NO conversion in the reaction temperature range of 160°C–300°C. The formation of CeVO₄ on the surface of catalysts caused the decrease of redox ability.     

Photocatalytic degradation of methyl orange using ZnO/TiO2 composites

ZnO/TiO₂ composites were synthesized by using the solvothermal method and ultrasonic precipitation followed by heat treatment in order to investigate their photocatalytic degradation of methyl orange (MO) in aqueous suspension under UV irradiation. The composition and surface structure of the catalyst were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and transmission electron microscopy (TEM). The degradation efficiencies of MO at various pH values were obtained. The highest degradation efficiencies were obtained before 30 min and after 60 min at pH 11.0 and pH 2.0, respectively. A sample analysis was conducted using liquid chromatography coupled with electrospray ionization ion-trap mass spectrometry. Six intermediates were found during the photocatalytic degradation process of quinonoid MO. The degradation pathway of quinonoid MO was also proposed.     

Influence of environmental temperature and relative humidity on photocatalytic oxidation of toluene on activated carbon fibers coated TiO2

TiO₂ supported on active carbon fiber (TiO₂/ACF), an absorbable photocatalyst, is a new kind of material applied in air purification. In this paper, the influence of environmental temperature (T) and relative humidity (RH) on the gas-solid adsorption of toluene and the photocatalytic oxidation (PCO) efficiency of adsorbed toluene on TiO₂/ACF were studied, and then, the purification capability of TiO₂/ACF was estimated. PCO results showed that although the PCO efficiency increased under high RH and T levels, the amount of adsorption of toluene decreased. Moreover, quantitative analysis results of intermediates indicated that more environmental risk emerged when PCO of toluene was carried out at higher environmental T and RH levels because more toxic intermediates would be accumulated on the TiO₂/ACF. So, it is significant to control the environmental T and RH conditions in the application of the PCO technique. T = 25°C and RH530% is the optimal condition for purifying toluene in our experimental system.     

Catalytic hydrolysis of gaseous HCN over Cu–Ni/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst: parameters and conditions

To decompose efficiently hydrogen cyanide (HCN) in exhaust gas, g-Al₂O₃-supported bimetallicbased Cu–Ni catalyst was prepared by incipient-wetness impregnation method. The effects of the calcination temperature, H₂O/HCN volume ratio, reaction temperature, and the presence of CO or O₂ on the HCN removal efficiency on the Cu–Ni/g-Al₂O₃ catalyst were investigated. To examine further the efficiency of HCN hydrolysis, degradation products were analyzed. The results indicate that the HCN removal efficiency increases and then decreases with increasing calcination temperature and H₂O/HCN volume ratio. On catalyst calcined at 400°C, the efficiency reaches a maximum close to 99% at 480 min at a H₂O/HCN volume ratio of 150. The HCN removal efficiency increases with increasing reaction temperature within the range of 100°C–500°C and reaches a maximum at 500°C. This trend may be attributed to the endothermicity of HCN hydrolysis; increasing the temperature favors HCN hydrolysis. However, the removal efficiencies increases very few at 500°C compared with that at 400°C. To conserve energy in industrial operations, 400°C is deemed as the optimal reaction temperature. The presence of CO facilitates HCN hydrolysis andincreases NH₃ production. O₂ substantially increases the HCN removal efficiency and NO _x production but decreases NH₃ production.

Open image in new window

     

Photocatalytic mineralization of a water pollutant,Sunset Yellow dye by an advanced oxidation process using a modified catalyst

ZnS-loaded TiO₂ (ZnS–TiO₂) was synthesized by a sol–gel method. The catalyst was characterized by using different techniques (XRD, HR-SEM, EDS, DRS, PL, XPS, and BET methods). The photocatalytic activity of ZnS–TiO₂ was investigated for the degradation of Sunset Yellow FCF (SY) dye in an aqueous solution using ultraviolet light. ZnS–TiO₂ is found to be more efficient than prepared TiO₂, TiO₂–P25, TiO₂ (Merck), and ZnS at pH 7 for the mineralization of SY. The effects of operational parameters such as the amount of photocatalyst, dye concentration, and initial pH on photo mineralization of SY have been analyzed. The mineralization of SY has been confirmed by chemical oxygen demand measurements. The catalyst is found to be reusable.