Pb（II） biosorption using chitosan and chitosan derivatives beads： Equilibrium, ion exchange and mechanism studies

The study examined the adsorption of Pb(II) ions from aqueous solution onto chitosan, chitosan-GLA and chitosan-alginate beads. Several important parameters influencing the adsorption of Pb(II) ions such as initial pH, adsorbent dosage and di erent initial concentration of Pb(II) ions were evaluated. The mechanism involved during the adsorption process was explored based on ion exchange study and using spectroscopic techniques. The adsorption capacities obtained based on non–linear Langmuir isotherm for chitosan, chitosan-GLA and chitosan-alginate beads in single metal system were 34.98, 14.24 and 60.27 mg/g, respectively. However, the adsorption capacity of Pb(II) ions were reduced in the binary metal system due to the competitive adsorption between Pb(II) and Cu(II) ions. Based on the ion exchange study, the release of Ca2+, Mg2+, K+ and Na+ ions played an important role in the adsorption of Pb(II) ions by all three adsorbents but only at lower concentrations of Pb(II) ions. Infrared spectra showed that the binding between Pb(II) ions and the adsorbents involved mostly the nitrogen and oxygen atoms. All three adsorbents showed satisfactory adsorption capacities and can be considered as an e cient adsorbent for the removal of Pb(II) ions from aqueous solutions.     

Seed treatment and inhibition of plantpathology by chitosan

ＳｅｅｄｔｒｅａｔｍｅｎｔａｎｄｉｎｈｉｂｉｔｉｏｎｏｆｐｌａｎｔｐａｔｈｏｌｏｇｙｏｆｃｈｉｔｏｓａｎＪｉａｎｇＴｉｎｇｄａ；ＭａＲｕｉｘｉａ；ＱｉＲｕｉｎｕｎｇ；ＺｈａｎｇＣｈｕｎｐｉｎｇ（ＲｅｓｅａｒｅｈＣｅｎｔｅｒｆｏｒＥｃｏ－Ｅｎｖｉｒｏｎ...     

Pb(Ⅱ) biosorption using chitosan and chitosan derivatives beads: Equilibrium,ion exchange and mechanism studies

The study examined the adsorption of Pb(II) ions from aqueous solution onto chitosan, chitosan-GLA and chitosan-alginate beads. Several important parameters influencing the adsorption of Pb(II) ions such as initial pH, adsorbent dosage and different initial concentration of Pb(II) ions were evaluated. The mechanism involved during the adsorption process was explored based on ion exchange study and using spectroscopic techniques. The adsorption capacities obtained based on non-linear Langmuir isotherm for ch...     

Immobilization of microorganisms using carrageenan gels coated with chitosan and application to biodegradation of 4 chlorophenol

Ｉｍｍｏｂｉｌｉｚａｔｉｏｎｏｆｍｉｃｒｏｏｒｇａｎｉｓｍｓｕｓｉｎｇｃａｒａｇｅｎａｎｇｅｌｓｃｏａｔｅｄｗｉｔｈｃｈｉｔｏｓａｎａｎｄａｐｐｌｉｃａｔｉｏｎｔｏｂｉｏｄｅｇｒａｄａｔｉｏｎｏｆ４ｃｈｌｏｒｏｐｈｅｎｏｌＷａｎｇＪｉａｎｌｏｎｇ...     

Carbon dioxide adsorption and cycloaddition reaction of epoxides using chitosan–graphene oxide nanocomposite as a catalyst

One of today's major challenges is to provide green materials for a cleaner environment. We have conducted studies on carbon dioxide(CO2) adsorption and conversion to valuable products by an ecofriendly approach based in chitosan/graphene oxide(CSGO) nanocomposite film. Rheological behavior indicates that the CSGO has a better solvation property than the pure chitosan. An adsorption capacity of 1.0152 mmol CO_2/g of CSGO nanocomposite at4.6 bar was observed. The catalytic behavior of the CSGO nanocomposite in the presence of tetra-n-butylammonium iodide(n-Bu4 NI) as co-catalyst was evaluated for the cycloaddition of CO_2 to epoxides, to give cyclic carbonates, in the absence of any solvent. These results strongly suggest that the CSGO nanocomposite may open new vistas towards the development of ecofriendly material for catalytic conversion and adsorption of CO_2 on industrial scale.     

Preparation and properties of chitosan–metal complex: Some factors influencing the adsorption capacity for dyes in aqueous solution

Chitosan–metal complexes have been widely studied in wastewater treatment, but there are still various factors in complex preparation which are collectively responsible for improving the adsorption capacity need to be further studied. Thus, this study investigates the factors affecting the adsorption ability of chitosan–metal complex adsorbents, including various kinds of metal centers, different metal salts and crosslinking degree. The results show that the chitosan–Fe( Ⅲ) complex prepared by sulfate salts exhibited the best adsorption efficiency(100%) for various dyes in very short time duration(10 min), and its maximum adsorption capacity achieved 349.22 mg/g. The anion of the metal salt which was used in preparation played an important role to enhance the adsorption ability of chitosan–metal complex. SO_4~(2-) ions not only had the effect of crosslinking through electrostatic interaction with amine group of chitosan polymer, but also could facilitate the chelation of metal ions with chitosan polymer during the synthesis process.Additionally, the p H sensitivity and the sensitivity of ionic environment for chitosan–metal complex were analyzed. We hope that these factors affecting the adsorption of the chitosan–metal complex can help not only in optimizing its use but also in designing new chitosan–metal based complexes.     

Removal of Cr(Ⅵ) by glutaraldehyde-crosslinked chitosan encapsulating microscale zero-valent iron: Synthesis,mechanism, and longevity

Microscale zero-valent iron(mZVI) has shown great potential for groundwater Cr(Ⅵ) remediation. However, low Cr(Ⅵ) removal capacity caused by passivation restricted the wide use of mZVI. We prepared mZVI/GCS by encapsulating mZVI in a porous glutaraldehydecrosslinked chitosan matrix, and the formation of the passivation layer was alleviated by reducing the contact between zero-valent iron particles. The average pore diameter of mZVI/GCS was 8.775 nm, which confirmed the mesoporous characteristic ...     

Novel chitosan–ethylene glycol hydrogel for the removal of aqueous perfluorooctanoic acid

It is urgent to explore an effective removal method for perfluorooctanoic acid (PFOA) due to its recalcitrant nature. In this study, a novel chitosan-based hydrogel (CEGH) was prepared with a simple method using chitosan and ethylene glycol through a repeated freezing–thawing procedure. The adsorption of PFOA anions to CEGH agreed well to the Freundlich–Langmuir model with a maximum adsorption capacity as high as 1275.9?mg/g, which is higher than reported values of most adsorbents for PFOA. The adsorption was influenced by experimental conditions. Experimental results showed that the main removal mechanism was the ionic hydrogen bond interaction between carbonyl groups (COO^?) of PFOA and protonated amine (NH⁺) of the CEGH adsorbent. Therefore, CEGH is a very attractive adsorbent that can be used to remove PFOA from water in the future.     

Evaluation of soil washing process with carboxymethyl-β-cyclodextrin and carboxymethyl chitosan for recovery of PAHs/heavy metals/fluorine from metallurgic plant site

Polycyclic aromatic hydrocarbons(PAHs)/heavy metals/fluorine(F) mixed-contaminated sites caused by abandoned metallurgic plants are receiving wide attention. To address the associated environmental problems,this study was initiated to investigate the feasibility of using carboxymethyl-β-cyclodextrin(CMCD) and carboxymethyl chitosan(CMC) solution to enhance ex situ soil washing for extracting mixed contaminants. Further,Tenax extraction method was combined with a first-three-compartment model to evaluate the environmental risk of residual PAHs in washed soil. In addition,the redistribution of heavy metals/F after decontamination was also estimated using a sequential extraction procedure. Three successive washing cycles using50 g/L CMCD and 5 g/L CMC solution were effective to remove 94.3% of total PAHs,93.2% of Pb,85.8% of Cd,93.4% of Cr,83.2% of Ni and 97.3% of F simultaneously. After the 3rd washing,the residual PAHs mainly existed as very slowly desorbing fractions,which were in the form of well-aged,well-sequestered compounds; while the remaining Pb,Cd,Cr,Ni and F mainly existed as Fe–Mn oxide and residual fractions,which were always present in stable mineral forms or bound to non-labile soil fractions. Therefore,this combined cleanup strategy proved to be effective and environmentally friendly.     

Effects of chitosan on growth of an aquatic plant （Hydrilla verticillata） polluted waters with different chemical oxygen demands

Effects of chitosan on a submersed plant, HydriUa verticillata, were investigated. Results indicated that H. verticillata could prevent ultrastructure phytotoxicities and oxidativereaction from polluted water with high chemical oxygen demand （COD）. Superoxide dismutase （SOD） activity and malondialdehyde （MDA） contents in H. verticillata treated with 0.1% chitosan in wastewater increased with high COD （980 rag/L） and decreased with low COD （63 mg/L）, respectively. Ultrastructural analysis showed that the stroma and grana of chloroplast basically remained normal. However, plant ceils from the control experiment （untreated with chitosan） were vacuolated and the cell interval increased. The relict of protoplast moved to the center, with cells tending to disjoint. Our findings indicate that wastewater with high COD concentration can cause a substantial damage to submersed plant, nevertheless, chitosan probably could alleviate the membrane lipid peroxidization and ultrastructure phytotoxicities, and protect plant cells from stress of high COD concentration polluted water.     

Effects of chitosan on growth of an aquatic plant (Hydrilla verticillata) in polluted waters with different chemical oxygen demands

Effects of chitosan on a submersed plant, Hydrilla verticillata, were investigated. Results indicated that H. venicillata could prevent ultrastructure phytotoxicities and oxidativereaction from polluted water with high chemical oxygen demand (COD). Superoxide dismutase (SOD) activity and malondialdehyde (MDA) contents in H. verticillata treated with 0.1% chitosan in wastewater increased with high COD (980 mg/L) and decreased with low COD (63 mg/L), respectively. Ultrastructural analysis showed that the stroma and grana of chloroplast basically remained normal. However, plant cells from the control experiment (untreated with chitosan) were vacuolated and the cell interval increased. The relict of protoplast moved to the center, with cells tending to disjoint. Our findings indicate that wastewater with high COD concentration can cause a substantial damage to submersed plant, nevertheless, chitosan probably could alleviate the membrane lipid peroxidization and ultrastructure phytotoxicities, and protect plant cells from stress of high COD concentration polluted water.     

Unveiling the mechanisms of Fe(Ⅲ)-loaded chitosan composite(CTS-Fe) in enhancing anaerobic digestion of waste activated sludge

Anaerobic digestion(AD) of waste activated sludge(WAS) is usually limited by the low generation efficiency of methane. Fe(Ⅲ)-loaded chitosan composite(CTS-Fe) have been reported to effectively enhanced the digestion of WAS, but its role in promoting anaerobic sludge digestion remains unclear. In present study, the effects of CTS-Fe on the hydrolysis and methanogenesis stages of WAS anaerobic digestion were investigated. The addition of CTSFe increased methane production potential by 8%–23% under...     

Three industries and wastewater and COD discharge of Beijing

Ｒｅｃｅｎｔｌｙ,ｗｉｔｈｔｈｅｓｗｉｆｔｄｅｖｅｌｏｐｍｅｎｔｏｆｅｃｏｎｏｍｙａｎｄｔｈｅｉｍｐｒｏｖｅｍｅｎｔｏｆｐｅｏｐｌｅ′ｓｌｉｖｉｎｇｓｔａｎｄａｒｄ ,ｔｈｅｗａｔｅｒｕｓｅａｍｏｕｎｔａｎｄｗａｓｔｅｗａｔｅｒｄｉｓｃｈａｒｇｅｂｅｃｏｍｅｂｉｇｇｅｒａｎｄｂｉｇｇｅｒ,ａｎｄｔｈｅｗａｔｅｒｑｕａｌｉｔｙｉｓｇｅｔｔｉｎｇｗｏｒｓｅａｎｄｗｏｒｓｅ .Ｓｏｉｌａｎｄａｇｒｉｃｕｌｔｕｒａｌｐｒｏｄｕｃｔｓｈａｖｅｂｅｅｎｐｏｌｌｕｔｅｄｂｙｔｈｅｗａｓｔｅｗａｔｅｒ,ａｎｄｐｅｏｐ…     

Trends and characteristics of total ozone’and vertical profile in Kunming and Beijing，China

This paper presents the trends of total ozone at Beijing and Kunming areas during the period of 1979 to 1989．The SBUV ozone vertical profile data and the periodic oscillation in upper ozone layers over Beijing area are also described．The results show that the variation of Beijing and Kunming per decade are about-5%and-1.5%．respectively．     

Methylated and thiolated arsenic species for environmental and health research——A review on synthesis and characterization

Hundreds of millions of people around the world are exposed to elevated concentrations of inorganic and organic arsenic compounds, increasing the risk of a wide range of health effects. Studies of the environmental fate and human health effects of arsenic require authentic arsenic compounds. We summarize here the synthesis and characterization of more than a dozen methylated and thiolated arsenic compounds that are not commercially available. We discuss the methods of synthesis for the following14 trivalent(Ⅲ) and pentavalent() arsenic compounds: monomethylarsonous acid(MMA~Ⅲ), dicysteinylmethyldithioarsenite(MMA~Ⅲ(Cys)_2), monomethylarsonic acid(MMA~Ⅴ),monomethylmonothioarsonic acid(MMMTAⅤ) or monothio-MMA~Ⅴ, monomethyldithioarsonic acid(MMDTA~Ⅴ) or dithio-MMA~Ⅴ, monomethyltrithioarsonate(MMTTA~Ⅴ) or trithio-MMA~Ⅴ,dimethylarsinous acid(DMA~Ⅲ), dimethylarsino-glutathione(DMA~Ⅲ(SG)), dimethylarsinic acid(DMA~Ⅴ), dimethylmonothioarsinic acid(DMMTA~Ⅴ) or monothio-DMAⅤ, dimethyldithioarsinic acid(DMDTA~Ⅴ) or dithio-DMA~Ⅴ, trimethylarsine oxide(TMAO~Ⅴ), arsenobetaine(AsB), and an arsenicin-A model compound. We have reviewed and compared the available methods,synthesized the arsenic compounds in our laboratories, and provided characterization information. On the basis of reaction yield, ease of synthesis and purification of product, safety considerations, and our experience, we recommend a method for the synthesis of each of these arsenic compounds.     

Dynamic simulation and modeling of PCP transport between sediment and water

ＤｙｎａｍｉｃｓｉｍｕｌａｔｉｏｎａｎｄｍｏｄｅｌｉｎｇｏｆＰＣＰｔｒａｎｓｐｏｒｔｂｅｔｗｅｅｎｓｅｄｉｍｅｎｔａｎｄｗａｔｅｒＬｉＴｉｅ，ＹｅＣｈａｎｇｍｉｎｇ，ＬｅｉＺｈｉｆａｎｇＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏＥｎｖｉｒｏ...     

Chemical behavior and risk assessment of four pesticidesin soil and water

ＣｈｅｍｉｃａｌｂｅｈａｖｉｏｒａｎｄｒｉｓｋａｓｓｅｓｓｍｅｎｔｏｆｆｏｕｒｐｅｓｔｉｃｉｄｅｓｉｎｓｏｉｌａｎｄｗａｔｅｒＪｉａｎｇＸｉｌｉｕ；ＨｕａＸｉａｏｍｅｉ（ＮａｎｊｉｎｇＩｎｓｔｉｔｕｔｅｏｆＥｎｖｉｒｏｎｒｎｅｎｔＳｃｉｅｎｃｅ，Ｎａ...     

β-Cyclodextrin and its derivatives-enhanced solubility and biodegradation of 2-nitrobiphenyl

This paper investigated the effects of β-cyclodextrins （I3-CD） and its two derivatives, hydroxypropyl-β-cyclodextrin （HPCD） and carboxymethyl-β-cyclodextrin （CMCD）, on the solubility and biodegradation of 2-nitrophenyl by an A cinetbacter sp. Results showed that β-CD, HPCD and CMCD could not be utilized by A cinetbacter sp. as sole carbon source and none of the CDs had toxic effects on the growth of the bacteria in the experiments; all the CDs could enhance the apparent solubility and accelerate the biodegradation of 2-nitrobipheny. It showed that biodegradation-accelerating effects of CDs on 2-nitrobiphenyl were correlated with their solubility-enhancing effects. Among three CDs investigated, CMCD had the most obvious effects both on the apparent solubility and the biodegradation, followed by β-CD and HPCD.     

Global implications of biomass and biofuel use in Germany – Recent trends and future scenarios for domestic and foreign agricultural land use and resulting GHG emissions

The global land area required to meet the German consumption of agricultural products for food and non-food use was quantified, and the related greenhouse gas (GHG) emissions, particularly those induced by land-use changes in tropical countries, were estimated. Two comprehensive business-as-usual scenarios describe the development corridor of biomass for non-food use in terms of energetic and non-energetic purposes. In terms of land use, Germany was already a net importer of agricultural land in 2004, and the net additional land required by 2030 is estimated to comprise 2.5–3.4 Mha. This is mainly due to biofuel demand driven by current policy targets. Meeting the required biodiesel import demand would result in an additional GWP of 23–37 Tg of CO₂ equivalents through direct and indirect land-use changes. Alternative scenario elements outline the potential options for reducing Germany's land requirement, which reflect future global per capita availability.