The study of rare earth elements in farmer's well waters of the Podwiśniówka acid mine drainage area (south-central Poland)

The principal objective of the current study was to elucidate the potential influence of acid mine drainage (AMD) pond on neighboring farmer's wells in the Podwi?niówka area (south-central Poland), using North American Shale Composite (NASC)-normalized rare earth element (REE) concentration profiles. The well waters generally displayed a distinctly positive Eu anomaly similar to that of parent rocks and AMD sediment. In contrast, the AMD pit pond water exhibited the typical roof-shaped NASC-normalized REE concentration pattern with a strong positive Gd anomaly. The low pH (mean of 2.9) of this pond water is induced by oxidation of pyrite that occurs in quartz veins and rocks exposed in the abandoned Podwi?niówka quarry. The principal source of REEs in turn is a crandallite series of aluminum–phosphate–sulfate (APS) minerals (gorceixite with florencite and Ce-bearing goyazite) that prevail in most clayey shales. These data indicate that the REE contents of the AMD pit pond and well waters are linked to bedrock mineralogy and lithology, but not to pyrite mineralization. The diverse REE patterns of NASC-normalized REE concentrations of the AMD and well waters may suggest complex sorption and desorption processes that occur at the rock–water interface influenced by different pH, Eh, temperature, and other factors. This is evidenced by a presence of strong positive Ce anomaly in the rocks, a lack of Ce anomaly in the AMD water and sediment, and the dominant negative anomaly of this element in the well waters. Variations in correlation coefficients (r ²) of REE concentrations between the rocks and the well waters may also result from a different contribution of quartzites, clayey shales, or tuffites to the REE signal of well waters as well as from mixing of shallow groundwater with infiltrating rainwater or meltwater with different REE profiles.     

Assessment of particulate matter in the urban atmosphere: size distribution, metal composition and source characterization using principal component analysis

In this study, the size distribution of airborne particles and related heavy metals Co, Cd, Sn, Cu, Ni, Cr, Pb and V in two urban areas in Istanbul: Yenibosna and Goztepe, were examined. The different inhalable particles were collected by using a cascade impactor in eight size fractions (<0.4 μm, 0.4-0.7 μm, 1.1-2.1 μm, 2.1-3.3 μm, 3.3-4.7 μm, 4.7-5.8 μm, 5.8-9 μm and >9 μm) for six months at each station. Samples were collected on glass fiber filters and filters were extracted and analyzed using ICP-MS. Log-normal distributions showed that the particles collected at the Yenibosna site have a smaller size compared to the Goztepe samples and the size distribution of PM was represented the best by the tri-modal. The average total particle concentrations and standard deviations were obtained as 67.7 ± 17.0 μg m(-3) and 82.1 ± 21.2 μg m(-3), at the Yenibosna and G?ztepe sites, respectively. The higher metal rate in fine and medium coarse PM showed that the anthropogenic sources were the most significant pollutant source. Principal component analysis identified five components for PM namely traffic, road dust, coal and fuel oil combustion, and industrial.     

Chemical and micromorphological properties of TSP and PM10 particles: case study in Bucharest urban area

The purpose of this work was to determine some aspects of micromorphology of total suspended particles (TSP) and particulate matter with aerodynamic diameter ≤10 μm (PM(10)) and their major elemental components in order to highlight the main characteristics of the atmospheric particles from an urban environment, having a case study in the urban area of Bucharest. The sampling of PM(10) and TSP were conducted in the close vicinity of a high traffic road for 72 h per sample and also priority pollutants in air: Pb and Cd were quantified and correlations between their concentrations and local wind directions were also found. The parameters characterizing the micromorphology of particle-roughness of the particle surface and area of particle-were correlated with wind direction.     

一次连续在线观测分析天津市细颗粒物污染特征

根据2005年的5月17日—5月23日GR IMM(1.109#)谱分析仪在线观测结果考察天津市细颗粒物浓度和质量浓度特征。观测期间,天津市颗粒物数浓度平均值为1 124 cm-3,粒径分布为0.25μm~0.60μm,98.5%粒子的粒径0.65μm。同期PM10日均质量浓度值为204μg/m3,ρ(PM2.5)为104μg/m3,ρ(PM1.0)为82.9μg/m3。ρ(PM1.0)/ρ(PM2.5)超过80%,粒径1μm超细颗粒物为天津城市大气颗粒物的主要成分。     

Reactivity, interactions and transport of trace elements, organic carbon and particulate material in a mountain range river system (Adour River, France)

The background levels, variability, partitioning and transport of eleven trace elements-Ag, Al, As, Cd, Co, Cr, Cu, Mn, Pb, Zn and U-were investigated in a mountain range river system (Adour River, France). This particular river system displayed a turbulent hydrodynamic regime, characterized by flash-transient discharge conditions leading to fast shifts in suspended particulate matter (SPM) concentrations as high as two orders of magnitude (12 to 600 mg l(-1)). The distribution of SPM was accurately predicted with a "hysteresis" transport model, indicating that about 75% of the annual solids load was exported within 20 to 40 days. Dissolved and particulate concentrations of most trace elements were low compared to their concentrations in other reference river systems expect for Pb and Cr, associated with historical anthropogenic activities. Although dissolved and particulate metal concentrations were steady for most elements during low and average discharge conditions, significant changes were observed with increasing river discharge. The changes in trace element concentrations in the two compartments was found to induce a partitioning anomaly referred to as the particulate concentration effect. This anomaly was significant for Cr, Mn, Pb, Zn, Cu and organic carbon (p < 0.03). The processes driving this anomaly were possibly linked to the modification and/or increase of colloidal organic and inorganic vectors, suggested by the significant increase of DOC (p < 0.001) and dissolved Al concentrations (p < 0.05) during flood conditions. A complementary process linked to the influence of coarse particles of low complexation capacity and transported mainly during high discharge may also effect trace element concentrations. Annual metal fluxes transported by this river system were estimated using the hysteresis SPM model with consideration of these fate processes. Metals in the Adour River system are primarily exported into the Bay of Biscay (Atlantic Ocean).     

Partitioning between soluble and insoluble fractions of major and trace elements in size-classified airborne particulate matter collected in Tokyo

Airborne particulate matter (APM) is a major air pollutant, and the effect on human health of fine APM (PM2.5) deposited deep inside the lungs has recently become a serious concern. Moreover, soluble constituents may leach from APM, and intensify some health disorders. To identify the soluble chemical constituents of APM, size-classified APM was sampled in central Tokyo, and the elemental compositions of the water-soluble, acid-soluble and insoluble fractions were investigated. The extraction procedure was validated by calculating the mass balance of soluble and insoluble fractions of a standard APM reference material (NIST SRM 1648). Among the major elements, Fe and Ti in APM of all size classes and K in coarse APM were distributed primarily in the insoluble fraction and were inferred to be present as oxides or silicates, whereas Na and Mg in all size classes and K in fine APM were primarily in the water-soluble fraction and were inferred to be have originated mainly from sea salt. Among the trace elements, Zn and Cd in the fine APM (d < 2 microm) had large enrichment factors, indicating an anthropogenic origin, and were distributed primarily in the water-soluble fraction. When fine anthropogenic APM enters into the lungs, leached toxic elements, such as Cd, may adversely affect health. The higher the bonding energy of the monoxide molecule of the element was, the higher its distribution ratio was in the water-soluble fraction. Therefore, many metallic elements in APM were inferred to be present as oxygen-bonded compounds.     

乌鲁木齐市可吸入颗粒物水溶性离子特征及来源解析

采暖期时在乌鲁木齐市采集了环境空气中的可吸入颗粒物,对可吸入颗粒物质量浓度及8种水溶性离子的特征和来源进行了分析。结果表明,细粒子和粗粒子的月平均质量浓度分别是53.5～233.3μg/m3和38.9～60.9μg/m3;细粒子和粗粒子中水溶性离子主要由SO24-、NH4+和NO3-组成;粗粒子中NH4+与NO3-和SO24-的相关性分别是0.70和0.66,细粒子中NH4+与NO3-和SO24-的相关性分别是0.89和0.93,铵盐是乌鲁木齐可吸入颗粒物主要存在形式;煤烟尘是乌鲁木齐市采暖期可吸入颗粒物的主要来源。     

Two thousand years of atmospheric rare earth element (REE) deposition as revealed by an ombrotrophic peat bog profile,Jura Mountains,Switzerland

A peat core from a Swiss bog represents 2110 14C years of peat accumulation and provides a continuous record of atmospheric rare earth element (REE) deposition. This is the first study providing a time-series of all REE originating from the atmosphere. Concentrations of the 14 REE (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) were determined using inductively coupled plasma-mass spectrometry (ICP-MS) after dissolution of 200 mg aliquots of age-dated peat samples with 3 ml HNO3 and 0.1 ml HBF4 at 240 degrees C in a microwave autoclave. Strict quality control schemes were applied to ensure the accuracy of the applied analytical methodology. Previous analyses of selected REE by instrumental neutron activation analysis (INAA) in the same set of peat samples revealed that INAA frequently under- or overestimated REE concentrations in a systematic manner. Concentration profiles obtained for all REE were almost identical, except for Ce and Eu. Calculation of enrichment factors (EF) revealed a distinct depletion of heavy REE relative to light REE in peat samples since the beginning of the 19th century which marks the onset of the Industrial Revolution in Europe, suggesting a pronounced influence by anthropogenic activities. Enrichments of REE calculated using Sc as a reference element exceeded unity, relative to the Upper Continental Crust. Overall, EF in all peat samples ranged from 1.96 for Sm to 2.34 for Gd, with considerably lower EF for Ce (1.82) and Eu (1.44), respectively. A significant enrichment of all REE which may have been caused by military activities, was observed in the peat sample dating from World War II (1944); this exceptional sample, however, is not enriched in Ce. The concentration profiles of REE were similar but not identical to those of other lithogenic, conservative reference elements such as Sc, Y, Al, Zr and Ti. While it has been suggested that individual REE concentrations or the sum of REE can be used as a reference parameter to calculate crustal EF in environmental samples the data presented here indicates that anthropogenic emissions of REE cannot simply be ignored.     

State of rare earth elements in different environmental components in mining areas of China

China has relatively abundant rare earth elements (REEs) reserves and will continue to be one of the major producers of REEs for the world market in the foreseeable future. However, due to the large scale of mining and refining activities, large amounts of REEs have been released to the surrounding environment and caused harmful effects on local residents. This paper summarizes the data about the contents and translocation of REEs in soils, waters, atmosphere, and plants in REE mining areas of China and discusses the characteristics of their forms, distribution, fractionation, and influencing factors. Obviously high concentrations of REEs with active and bioavailable forms are observed in all environmental media. The mobility and bioavailability of REEs are enhanced. The distribution patterns of REEs in soils and water bodies are all in line with their parent rocks. Significant fractionation phenomenon among individual members of REEs was found in soil–plant systems. However, limited knowledge was available for REEs in atmosphere. More studies focusing on the behavior of REEs in ambient air of REE mining areas in China are highly suggested. In addition, systematic study on the translocation and circulation of REEs in various media in REEs mining areas and their health risk assessment should be carried out. Standard analytical methods of REEs in environments need to be established, and more specific guideline values of REEs in foods should also be developed.     

Improving suspended sediment measurements by automatic samplers

Suspended solids either as total suspended solids (TSS) or suspended sediment concentration (SSC) is an integral particulate water quality parameter that is important in assessing particle-bound contaminants. At present, nearly all stormwater runoff quality monitoring is performed with automatic samplers in which the sampling intake is typically installed at the bottom of a storm sewer or channel. This method of sampling often results in a less accurate measurement of suspended sediment and associated pollutants due to the vertical variation in particle concentration caused by particle settling. In this study, the inaccuracies associated with sampling by conventional intakes for automatic samplers have been verified by testing with known suspended sediment concentrations and known particle sizes ranging from approximately 20 μm to 355 μm under various flow rates. Experimental results show that, for samples collected at a typical automatic sampler intake position, the ratio of sampled to feed suspended sediment concentration is up to 6600% without an intake strainer and up to 300% with a strainer. When the sampling intake is modified with multiple sampling tubes and fitted with a wing to provide lift (winged arm sampler intake), the accuracy of sampling improves substantially. With this modification, the differences between sampled and feed suspended sediment concentration were more consistent and the sampled to feed concentration ratio was accurate to within 10% for particle sizes up to 250 μm.     

Dynamics and origin of PM2.5 during a three-year sampling period in Beijing, China

Systematic sampling and analysis were performed to investigate the dynamics and the origin of suspended particulate matter smaller than 2.5 μm in diameter (PM(2.5)), in Beijing, China from 2005 to 2008. Identifying the source of PM(2.5) was the main goal of this project, which was funded by the German Research Foundation (DFG). The concentrations of 19 elements, black carbon (BC) and the total mass in 158 weekly PM(2.5) samples were measured. The statistical evaluation of the data from factor analysis (FA) identifies four main sources responsible for PM(2.5) in Beijing: (1) a combination of long-range transport geogenic soil particles, geogenic-like particles from construction sites and the anthropogenic emissions from steel factories; (2) road traffic, industry emissions and domestic heating; (3) local re-suspended soil particles; (4) re-suspended particles from refuse disposal/landfills and uncontrolled dumped waste. Special attention has been paid to seven high concentration "episodes", which were further analyzed by FA, enrichment factor analysis (EF), elemental signatures and backward-trajectory analysis. These results suggest that long-range transport soil particles contribute much to the high concentration of PM(2.5) during dust days. This is supported by mineral analysis which showed a clear imprint of component in PM(2.5). Furthermore, the ratios of Mg/Al have been proved to be a good signature to trace back different source areas. The Pb/Ti ratio allows the distinction between periods of predominant anthropogenic and geogenic sources during high concentration episodes. Backward-trajectory analysis clearly shows the origins of these episodes, which partly corroborate the FA and EF results. This study is only a small contribution to the understanding of the meteorological and source driven dynamics of PM(2.5) concentrations.     

Characteristic, composition, and sources of TSP investigated by HRTEM/EDS and ESEM/EDS

Total suspended particle (TSP) collected at the fifth floor of House Dust in Hunan University, China, was analyzed in terms of microscopic morphology and chemical composition. The fine particles (50?nm-2?μm) in the TSP were analyzed by a high-resolution transmission electron microscope equipped with an energy-dispersive X-ray analyzer (HRTEM/EDS). Results showed that the particles were in shapes of plate, irregular and agglomerate. Based on EDS results, these fine particulate matter was primarily composed of Fe-rich (35.82-61.29%), Ca-rich (30.18-36.77%) and Si-rich (18.95-32.28%) particles. Other elements mainly including Mg (0.47-4.97%), Al (0.45-14.57%), S (0.45-4.73%), K (1.13-2.13%) and Zn (0.67-3.85%) were also observed. The sources analysis indicated that the HRTEM particles mainly originated from coal combustion, traffic emission, vehicles exhaust emission and fugitive soil or cement particulate matter. The coarse particles (4-50?μm) were detected by environmental scanning electron microscopy coupled with energy-dispersive X-ray detector (ESEM/EDS). Based on a simple algorithm, ESEM particles were categorized into five groups: C-bearing (46.15%, 67% and 86.98%), Si + Ca-bearing (21.48?+?11.80%, 16.51?+?10.81% and 16.32?+?10.62%), Si + Al-bearing (20.06?+?12.40%, 20.16?+?11.22% and 15.31?+?11.25%), Si-bearing (34.40%, 26.92% and 27.15%) particles and aggregates, most of which exhibit obvious crystalline structure, and these ESEM particles mainly derived from vehicles exhaust emission, coal combustion, soil, and biomass burning, while the aggregates are indicative of atmospheric reaction progress. HRTEM/EDS and ESEM/EDS are mutual complementary in analyzing the characteristic and determining the sources of TSP.     

Composition of heavy metals and airborne fibers in the indoor environment of a building during renovation

The renovation of a building will certainly affect the quality of air in the vicinity of where associated activities were undertaken, this includes the quality of air inside the building. Indoor air pollutants such as particulate matter, heavy metals, and fine fibers are likely to be emitted during renovation work. This study was conducted to determine the concentration of heavy metals, asbestos and suspended particulates in the Biology Building, at the Universiti Kebangsaan, Malaysia (UKM). Renovation activities were carried out widely in the laboratories which were located in this building. A low-volume sampler was used to collect suspended particulate matter of a diameter size less than 10 μm (PM??) and an air sampling pump, fitted with a cellulose ester membrane filter, were used for asbestos sampling. Dust was collected using a small brush and scope. The concentration of heavy metals was determined through the use of inductively coupled plasma-mass spectroscopy and the fibers were counted through a phase contrast microscope. The concentrations of PM?? recorded in the building during renovation action (ranging from 166 to 542 μg m?3) were higher than the value set by the Department of Safety and Health for respirable dust (150 μg m?3). Additionally, they were higher than the value of PM?? recorded in indoor environments from other studies. The composition of heavy metals in PM?? and indoor dust were found to be dominated by Zn and results also showed that the concentration of heavy metals in indoor dust and PM?? in this study was higher than levels recorded in other similar studies. The asbestos concentration was 0.0038 ± 0.0011 fibers/cc. This was lower than the value set by the Malaysian Department of Occupational, Safety and Health (DOSH) regulations of 0.1 fibers/cc, but higher than the background value usually recorded in indoor environments. This study strongly suggests that renovation issues need to be considered seriously by relevant stakeholders within the university in order to ensure that the associated risks toward humans and indoor environment are eliminated, or where this is not feasible, minimized as far as possible.     

Vehicular particulate matter emissions in road tunnels in Sao Paulo, Brazil

In the metropolitan area of S?o Paulo, Brazil, ozone and particulate matter (PM) are the air pollutants that pose the greatest threat to air quality, since the PM and the ozone precursors (nitrogen oxides and volatile organic compounds) are the main source of air pollution from vehicular emissions. Vehicular emissions can be measured inside road tunnels, and those measurements can provide information about emission factors of in-use vehicles. Emission factors are used to estimate vehicular emissions and are described as the amount of species emitted per vehicle distance driven or per volume of fuel consumed. This study presents emission factor data for fine particles, coarse particles, inhalable particulate matter and black carbon, as well as size distribution data for inhalable particulate matter, as measured in March and May of 2004, respectively, in the Janio Quadros and Maria Maluf road tunnels, both located in S?o Paulo. The Janio Quadros tunnel carries mainly light-duty vehicles, whereas the Maria Maluf tunnel carries light-duty and heavy-duty vehicles. In the Janio Quadros tunnel, the estimated light-duty vehicle emission factors for the trace elements copper and bromine were 261 and 220 microg km(-1), respectively, and 16, 197, 127 and 92 mg km(-1), respectively, for black carbon, inhalable particulate matter, coarse particles and fine particles. The mean contribution of heavy-duty vehicles to the emissions of black carbon, inhalable particulate matter, coarse particles and fine particles was, respectively 29, 4, 6 and 6 times higher than that of light-duty vehicles. The inhalable particulate matter emission factor for heavy-duty vehicles was 1.2 times higher than that found during dynamometer testing. In general, the particle emissions in S?o Paulo tunnels are higher than those found in other cities of the world.     

颗粒物激光雷达在大气复合污染立体监测中的应用

针对由于局地污染、沙尘输入、外源性输入与局地污染物相互叠加所导致的3种灰霾污染发生过程,分别选取3个典型案例,采用颗粒物激光雷达对污染物的时空分布特征进行解析。研究发现,在局地污染发生时,污染物从地面开始垂直向上扩散,扩散高度约1 km。重度污染过程中,气溶胶的日均垂直消光系数随高度的变化背离指数衰减特征,800 m高度处出现消光系数的极大值层,极大值超过2.5 km-1,800 m以下消光系数近乎常数,约为0.3 km-1。这说明,重污染过程中,有一层较厚重的颗粒物分布,使近地面污染物在垂直方向的扩散能力减弱,形成积累效应,造成大面积空气混浊。当有外源性沙尘输入时,激光雷达能够清晰地监测到污染团输入的全过程。沙团突然出现在高空2~3 km。污染团退偏振度较大,超过0.3。随着沙尘粒子的重力沉降,沙团的轮廓在垂直方向上不断地增大。沙团的输入,导致近地面粗颗粒质量浓度的增加幅度明显大于细颗粒。在第3个案例中,激光雷达清晰地监测到高空1.8~3 km突然出现含有大量球形细颗粒的污染团,同时还发现此污染团与近地面的污染物有不同的演化特征。近地面污染物随时间垂直向上扩散,12:00左右扩散高度超过1.8 km。而高空的污染团逐渐沉降进入边界层内,与近地面扩散的污染物相互混合,共同导致本地的灰霾天气。综上所述,激光雷达可以清晰地捕获污染物的垂直结构特征,对不同的致霾过程进行立体解析,实现对大气复合污染的监测和机理研判。     

Fraction characteristics of rare earth elements in the surface sediment of Bohai Bay, North China

Surface sediment samples were collected at 27 stations of Bohai Bay, North China. Sequential extractions were carried out in this study. REE were leached out from four labile fractions: Exchangeable (L1), bound to carbonates (L2), bound to Fe–Mn oxides (L3), bound to organic matter (L4), and the remainder was residual (R5). The total contents of REE fluctuate slightly in Bohai Bay, and are mainly concentrated in the middle region, showing relatively higher levels in the north than that in the south of Bohai Bay. Percentages of L1, L2, L3, L4, and R5 for REE suggest that the residual fraction accounts for the major component of REE, whereas Fe–Mn oxides also play important roles in combining labile REE. As the REE complex is not stabilized, the competition of complex could induce dissociation of the complex and redistribution of the REE in various environments. According to REE patterns and Y/Ho ratios of samples, REE are not anthropogenic or oceanic sources but riverine input, whereas suitable environment varieties can slightly affect the patterns and fractionations of REE. As powerful tracers for the variable of environment, higher anomaly of Eu and Ce in southern regions indicates a greater reduction in the condition of surface sediment in the south than that in the north of Bohai Bay.     

Concentrations, enrichment and predominant sources of Sb and other trace elements in size classified airborne particulate matter collected in Tokyo from 1995 to 2004

APM was collected and trace elements existing in the particles were monitored since May 1995 in this study. APM sample was collected separately by size (d < 2 microm, 2-11 microm and >11 microm) on the roof of the university building (45 m above ground) in the campus of Faculty of Science and Engineering, Chuo University, Tokyo, Japan, using an Anderson low volume air sampler. The collected sample was digested by HNO3, H2O2 and HF using a microwave oven, and major elements (Na, Mg, Al, K, Ca and Fe) were measured by ICP-AES, and trace elements (Li, Be, Ti, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Cd, Sb, Ba and Pb) were measured by ICP-MS. It was observed that the APM concentration was higher between the winter and the spring, compared to during the summer. The enrichment factor was calculated for each element in each set of APM (d < 2 microm, 2-11 microm and >11 microm). Seasonal trends of enrichment factors were examined, and the elements were classified into 3 groups according to the common seasonal behavior. It is likely that the elements in the same group have common origins. Toxic pollutant elements (Sb, Se, Cd, Pb and As) were found in small particles with d of <2 microm in concentrated levels. Antimony (Sb) had the highest enrichment factor, and the results suggested that Sb level in APM was extremely high. The origins of Sb were sought, and wastes from plastic incineration and brake pad wears of automobiles were suspected. Each set of APM (d < 2 microm, 2-11 microm and >11 microm) was classified by the shape, and the shape-dependent constituents of a single APM particle were quantitatively measured by SEM-EDX. High concentration of Sb was found in APM <2 microm and square particles. Particles less than 2 microm and square shaped particles were major particles produced by actual car braking experiments. From these experimental results it was concluded that the source of Sb in squared APM <2 microm is considered to be from brake pad wear.     

Reducing dust exposure in indoor climbing gyms

As users of indoor climbing gyms are exposed to high concentrations (PM(10) up to 4000 μg m(-3); PM(2.5) up to 500 μg m(-3)) of hydrated magnesium carbonate hydroxide (magnesia alba), reduction strategies have to be developed. In the present paper, the influence of the use of different kinds of magnesia alba on dust concentrations is investigated. Mass concentrations, number concentrations and size distributions of particles in indoor climbing gyms were determined with an optical particle counter, a synchronized, hybrid ambient real-time particulate monitor and an electrical aerosol spectrometer. PM(10) obtained with these three different techniques generally agreed within 25%. Seven different situations of magnesia alba usage were studied under controlled climbing activities. The use of a suspension of magnesia alba in ethanol (liquid chalk) leads to similar low mass concentrations as the prohibition of magnesia alba. Thus, liquid chalk appears to be a low-budget option to reduce dust concentrations. Magnesia alba pressed into blocks, used as powder or sieved to 2-4 mm diameter, does not lead to significant reduction of the dust concentrations. The same is true for chalk balls (powder enclosed in a sack of porous mesh material). The promotion of this kind of magnesia alba as a means of exposure reduction (as seen in many climbing gyms) is not supported by our results. Particle number concentrations are not influenced by the different kinds of magnesia alba used. The particle size distributions show that the use of magnesia alba predominantly leads to emission of particles with diameters above 1 μm.     

Study of size and mass distribution of particulate matter due to crop residue burning with seasonal variation in rural area of Punjab, India

Emission from field burning of agricultural crop residue is a common environmental hazard observed in northern India. It has a significant potential health risk for the rural population due to respirable suspended particulate matter (RSPM). A study on eight stage size segregated mass distribution of RSPM was done for 2 wheat and 3 rice crop seasons. The study was undertaken at rural and agricultural sites of Patiala (India) where the RSPM levels remained close to the National Ambient Air quality standards (NAAQS). Fine particulate matter (PM(2.5)) contributed almost 55% to 64% of the RSPM, showing that, in general, the smaller particles dominated during the whole study period with more contribution during the rice crop as compared to that of wheat crop residue burning. Fine particulate matter content in the total RSPM increased with decrease in temperature. Concentration levels of PM(10) and PM(2.5) were higher during the winter months as compared to that in the summer months. Background concentration levels of PM(10), PM(2.5) and PM(10-2.5) were found to be around 97 ± 21, 57 ± 15 and 40 ± 6 μg m(-3), respectively. The levels increased up to 66, 78 and 71% during rice season and 51, 43 and 61% during wheat crop residue burning, respectively. Extensive statistical analysis of the data was done by using pair t-test. Overall results show that the concentration levels of different size particulate matter are greatly affected by agricultural crop residue burning but the total distribution of the particulate matter remains almost constant.     

济南市大气颗粒物主要排放源多环芳烃成分谱研究

根据济南市颗粒物排放源的特点,通过采样分析获取了济南市大气颗粒物排放源(土壤风沙尘、扬尘、煤烟尘、机动车尾气尘)的粒度谱、多环芳烃成分谱,为济南市大气颗粒物中多环芳烃的源解析,提供可靠的基础数据。