Levels and chemical composition of PM in a city near a large Cu-smelter in Spain

A long-term series (2001-2008) of chemical analysis of atmospheric particulate matter (PM(10) and PM(2.5)) collected in the city of Huelva (SW Spain) is considered in this study. The impact of emission plumes from one of the largest Cu-smelters in the world on air quality in the city of Huelva is evidenced by the high daily and hourly levels of As, other potentially toxic elements (e.g. Cu, Zn, Cd, Se, Bi, and Pb) in particulate matter, as well as the high levels of some gaseous pollutants (NO(2) and SO(2)). Mean arsenic levels in the PM10 fraction were higher than the target value set by European Directive 2004/107/EC (6 ngAs m(-3)) for 1(st) January 2013. Hourly peak concentrations of As and other metals and elements (Zn, Cu, P and Se) analyzed by PIXE can reach maximum hourly levels as high as 326 ngAs m(-3), 506 ngZn m(-3), 345 ngCu m(-3), 778 ngP m(-3) and 12 ngSe m(-3). The contribution of Cu-smelter emissions to ambient PM is quantified on an annual basis in 2.0-6.7 μg m(-3) and 1.8-4.2 μg m(-3) for PM(10) and PM(2.5), respectively. High resolution outputs of the HYSPLIT dispersion model show the geographical distribution of the As ambient levels into the emission plume, suggesting that the working regime of the Cu-smelter factory and the sea breeze circulation are the main factors controlling the impact of the Cu-smelter on the air quality of the city. The results of this work improve our understanding of the behaviour of industrial emission plumes and their impact on air quality of a city, where the population might be exposed to very high ambient concentrations of toxic metals during a few hours.     

Assessment of Seasonal Enrichment of Heavy Metals in Respirable Suspended Particulate Matter of a Sub-Urban Indian City

Heavy metals in respirable suspended particulate matter (RSPM) were analyzed for different seasons, from July 2002 to December 2002, at different locations in Hisar (Haryana, India). The samples were analyzed for Pb, As, Ni, Cu, Mn, Fe and Mg on atomic absorption spectrophotometer (AAS) in air-acetylene flame. The concentration of heavy metals was more in the studied residential area followed by industrial area and commercial area. The concentrations of Fe, As, Ni and Mn were found to be more compared to other metals. Further, the concentrations of all the heavy metals were higher in pre-monsoon (extended summer) and monsoon followed by post-monsoon, autumn and winter. Meteorology played an important role in concentration of heavy metals in RSPM. Turbulent conditions resulted in higher concentration owing to re-suspension and external input whereas, low wind speed, low temperature and high relative humidity favoured low concentration of the pollutants. The evaluation of enrichment factor revealed that Pb, As, Ni, Cu, and Mn are emitted, chiefly from anthropogenic sources and Fe and Mg are associated with natural sources.     

杭州城区环境空气中二口恶英浓度状况研究

依据2009年7月至2012年2月连续3年对杭州城区环境空气中二英（PCDD/Fs）采样分析结果得知，杭州城区环境空气中二英毒性当量质量浓度变化范围为0.13～0.55 pg TEQ/m³，均值为0.34 pg TEQ/m³。城区环境空气中二英浓度季节变化不显著，夏季略低于冬季；城区范围内不同功能区之间二英浓度差别不显著；连续3年监测结果未显现二英年度变化趋势。沙尘暴天气环境空气中二英浓度显著增高，日常天气和烟花爆竹集中燃放天气环境空气中二英形态分布存在明显区别，烟花爆竹集中燃放期间八氯代二苯并-对-二英（OCDD）占总质量浓度比例显著提高。利用IBM SPSS Statistics 19.0统计软件对24个监测结果聚类分析发现，杭州城区环境空气中二英的同类物分布具有明显的“源”分布特征。     

Animal Hair as Biological Indicator for Heavy Metal Pollution in Urban and Rural Areas

Animal hair is a good biomonitoring tool for heavy metals assessment and reflects the content of heavy metals in the forage and soil. Heavy metals Fe, Mn, Co and Ni as well as toxic metals Cd and Pb were determined in goat, sheep and camel hair, forage and soil collected from four different environmental urban and rural regions. These regions are Aswan city farms, Allaqi desert pasture, Kalabsha farms and Halaiub desert pasture at far south of Egypt. The results reveal that sheep hair contains the highest levels of Fe and Mn (879 and 55 μg/g, respectively), camel hair contains the highest Pb, whereas for goat Cd and Ni were the highest. Heavy metal concentrations in the studied hair reflect the presence of these metals in the surrounding forage and soil and vary from one area to another, and give knowledge of pollution in the area. Correlation statistics analysis and cluster analysis show a good and significant value between metals in hair and plants.     

Study of size and mass distribution of particulate matter due to crop residue burning with seasonal variation in rural area of Punjab, India

Emission from field burning of agricultural crop residue is a common environmental hazard observed in northern India. It has a significant potential health risk for the rural population due to respirable suspended particulate matter (RSPM). A study on eight stage size segregated mass distribution of RSPM was done for 2 wheat and 3 rice crop seasons. The study was undertaken at rural and agricultural sites of Patiala (India) where the RSPM levels remained close to the National Ambient Air quality standards (NAAQS). Fine particulate matter (PM(2.5)) contributed almost 55% to 64% of the RSPM, showing that, in general, the smaller particles dominated during the whole study period with more contribution during the rice crop as compared to that of wheat crop residue burning. Fine particulate matter content in the total RSPM increased with decrease in temperature. Concentration levels of PM(10) and PM(2.5) were higher during the winter months as compared to that in the summer months. Background concentration levels of PM(10), PM(2.5) and PM(10-2.5) were found to be around 97 ± 21, 57 ± 15 and 40 ± 6 μg m(-3), respectively. The levels increased up to 66, 78 and 71% during rice season and 51, 43 and 61% during wheat crop residue burning, respectively. Extensive statistical analysis of the data was done by using pair t-test. Overall results show that the concentration levels of different size particulate matter are greatly affected by agricultural crop residue burning but the total distribution of the particulate matter remains almost constant.     

Appraisal of heavy metal concentration in selected vegetables exposed to different degrees of pollution in Agra, India

The accumulation of air-borne heavy metals in edible parts of vegetables in the chosen areas of the city of Agra, India was investigated. Agra, with a population of 1.7 million, is a medium-sized Indian city where leafy green vegetables are received generally from the surrounding areas of about 50 km radius. Vegetables Basella alba (spinch, locally called palak), Trigonella foenumgraecum (fenugreek, locally called methi), and Coriandrum sativum (coriander, locally called dhania) from the various sites of Agra, India were tested for Pb, Cd, Cr, Ni, and Zn by atomic absorption spectroscopy in washed and unwashed vegetable. The results obtained from this analysis revealed higher concentrations of toxic elements in unwashed samples than the washed samples. Among unwashed samples it was found that concentration of heavy metals is more in areas of busy traffic or industry density. The levels of lead in all samples were found above the maximum permissible limit recommended by PFA for metals in vegetables. The study concludes that transportation and storage systems during marketing play a significant role in determining the contamination and deposition of heavy metal on vegetable surfaces specially of the leafy variety.     

Study of heavy metals in some environmental samples

Fuels like coal and rubber are frequently used for brick burning. However, both coal and rubber contain heavy metals. These heavy metals may elutriate in the wake of fly ash or may adsorb or absorb in the product. The present work deals with the analysis of heavy metals in some samples collected from brick burning industries located in the vicinity of a metropolitan city, Peshawar, Pakistan. Samples from raw clay, product, chimney scale and fossil fuel & rubber were collected and leached with acid mixture. The leachates were concentrated and analyzed by atomic absorption spectrophotometer for the determination of chromium (Cr), lead (Pb), cadmium (Cd) and antimony (Sb). It was observed that heavy metals are present in clay, brick and chimney scale. However, significant amount of these metals was observed in chimney scale. It is inferred that such emanations laden with heavy metals are accompanying the stack gases which are being dumped in to the environment. In order to avoid environmental problems, strict environmental regulations shall be enforced and a constant check on these emanations to the environment must be made to ensure clean air act.     

Influence of aerosol spectrum and air pollutants on fog formation in urban environment of megacity Delhi, India

Urban areas are facing increasing fog frequencies that may result due to increased air pollution emanating from variety of sources. The increased pollution levels may lead to the atmospheric reactions resulting into the formation of secondary pollutants that may also lead to increased aerosol number concentrations (ANC) in the atmosphere. This could cause enhanced water aerosols in the presence of favourable meteorological conditions and high relative humidity. This study deals with the atmospheric pollution and visibility during winter season of megacity Delhi in order to assess the relationship between the two specifically during fog episodes. Thus, this study analyses the levels of air pollutants, aerosol spectrum and meteorological conditions during one week each in the winter season of the years 2004 and 2006 in order to have an improved understanding of their role in fog formation in mega-city Delhi. More than 300 h of measurements which included episodes of dense, thick and moderate fogs of about 25 h, were studied. The measurements cover most of the accumulation mode and greater size spectrum of aerosols. Thus, the analysis is performed for the entire period, specifically, before the fog sets up, during and afterwards. In general, the relatively small variations in number concentration show larger variations in visibility prior and post dense fog formation than during dense fog episodes. Preliminary analysis of monthly averaged RSPM (Respirable Suspended particulate Matter or PM(10)) concentration values for four winter months for a period of 6 years (1996-2001) and visibility did not show a good correlation with total occurrences of fog. However, daily averaged RSPM concentration showed a good correlation with the occurrences of thick fog. Diurnal variation of Sulfur-dioxide and Nitrogen dioxide were found to have inverse relationship with visibility during fog which may be due to formation of secondary pollutants such as sulfate and to a lesser extent nitrates. Amongst, the daily averaged concentrations of all the criteria pollutants, RSPM was found to be best correlated with the fog in comparison to other pollutants.     

Seasonal evaluation and spatial variability of suspended particulate matter in the vicinity of a large coal-fired power station in India—A case study

Coal combustion in the power sector gives rise to the emission of primary and secondary particulate pollutants. Since the emission of pollutants depends on coal quality and combustion technology, and given that transport, transformation and deposition of contaminants depend on regional climatic conditions, specific studies for the power stations is needed to evaluate their environmental impacts. Monitoring of ambient respirable suspended particulate matter (RSPM) and suspended particulate matter (SPM) levels around a large coal-fired power station in India was carried out. The specific objectives were the determination of spatial and seasonal variability in RSPM and SPM levels, and their relationship with meteorological parameters such as wind velocity and relative humidity. The results have shown a marked seasonal trend and spatial variability in RSPM and SPM levels in the study area. Higher concentrations of ambient RSPM and SPM were found in downwind monitoring stations compared to upwind direction. Ratios of RSPM to SPM and correlation coefficient values between RSPM and SPM along with meteorological parameters were also worked out. Relative humidity and wind velocity have shown an inverse relation with particulate deposition pattern.     

Biomonitoring of heavy metals by pollen in urban environment

Abstract Industrial development and consumption of petroleum products leads to increase air pollution levels especially in urban and industrial areas. Heavy metal components associated with air pollutants have far reaching effects with respect to economic and ecological importance of pollens. The pollens are male reproductive organs of the plant and travel through air from flower to flower for pollination purpose. During this period they are exposed to air pollutants. Present investigation thus pertains to study of effect of air pollutants on pollens especially biosorption and bioaccumulation of heavy metals. The pollens of three commonly occurring plants namely Cassia siamea, Cyperus rotundus, Kigelia pinnata have been studied from the NH-6 of Nagpur city, India. The pollens exposed to polluted air showed the presence of higher concentrations of Ca, Al and Fe as compared to unexposed pollens. Higher concentration of these metals was observed in Cyperus rotundus followed by Cassia siamea and Kigelia pinnata. These results indicate that pollens act as good indicator of air pollution giving results in short time of exposure of 5–10 h. Apart from this, it is also reported that some of these metals play crucial role in the metabolic activity in pollens for example Calcium is necessary for growth of pollen tube and other metabolic activities in pollens. The presence of these metals in pollens may also enhance the allergenicity of the pollens. Similarly accumulation of heavy metals may also deteriorate the quality of pollen for their economical use. The viability of pollen is also affected by these pollutants in sensitive species leading to impairment of their fertility.     

我国城市空气中有毒有害污染物暴露分析

我国目前正处于大气常规污染物治理与有毒有害污染物治理相互叠加的阶段,挥发性有机物等有毒有害大气污染物排放显著增加,大多城市环境赋存严重,而污染形势有待摸清。基于美国33种城市有毒有害大气污染物和日本23种大气优先控制污染物以及其他国家相关管控,根据我国企业化学品生产排放数据,综述了22种在我国东部经济带普遍存在的有毒有害大气污染物的环境赋存情况,对其在我国的环境检出、生产排放、污染物控制技术等进行了分析,发现苯、重金属等污染物检出浓度较高,多数污染物的最大检出浓度高于国外;国家管控有所不足,建议联合多种管理制度协同加强其风险管理,深度改善空气质量。     

Impact of Zn and Cu on the development of phenanthrene catabolism in soil

Mixtures of polycyclic aromatic hydrocarbons (PAHs) and heavy metals are of major concern in contaminated soil. Biodegradation of PAHs in metal-contaminated soils is complicated because metals are toxic and cannot be degraded by biological processes. This investigation considered the effects of Zn and Cu (50, 100, 500 and 1,000 mg/kg) on ¹⁴C-phenanthrene biodegradation in soil over 60-day contact time. The presence of Zn at all concentrations and low concentrations of Cu (50 and 100 mg/kg) had no significant effect (p?>?0.05) on the development of phenanthrene catabolism; however, at higher Cu concentrations, the development of phenanthrene catabolism and bacterial cell numbers were significantly reduced (p?<?0.05). This suggests that Cu is more toxic than Zn to soil microbial PAH catabolic activity. Metal/PAH-contaminated soils represent one of the most difficult remedial challenges and insights into PAH biodegradation in the presence of metals is necessary in order to assess the potential for bioremediation.     

Determination of selected heavy metals in air samples from the northern part of Jordan

In this work, the atmospheric concentrations of selected heavy metals including lead (Pb), iron (Fe), cadmium (Cd), copper (Cu), nickel (Ni), manganese (Mn), and zinc (Zn) were measured for two different sampling sites (urban and rural) in the northern part of Jordan (Irbid city). Samples were collected according to a certain schedule for 1 year. High volume air samplers and glass fiber filters were used to collect the samples. Collected samples were digested using a mixture of analytical grade nitric acid and analytical grade hydrochloric acid, and analyzed to evaluate the levels of heavy metals by atomic absorption spectrophotometry. Six heavy metals (Pb, Fe, Cu, Ni, Mn, and Zn) were measured in all samples; the concentrations of Cd and Co were not detected in Irbid atmosphere by atomic absorption spectroscopy. The results were used to determine the levels of heavy metal pollutants in air, possible sources, and to compare the levels of selected heavy metals in the two studied sites. Aerosols from the rural site have lower concentrations for all the metals compared to those from the urban site. The daily and monthly variations of the elements were investigated. All heavy metals in urban and rural sites reached maximum concentrations in June, July, and August. This is consistent with the increased activities leading to particulate matter emission during the summer period. The enrichment factors with respect to earth crust and correlation coefficients of heavy metals were investigated to predict the possible sources of heavy metals in air.     

Is PM10 mass measurement a reliable index for air quality assessment? An environmental study in a geographical area of north-eastern Italy

The aim of this study was to measure the concentration of some metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Ti) in PM(10) samples collected in one urban and one industrial site and to assess that PM(10) total mass measurement may be not sufficient as air quality index due to its complex composition. Metals were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and differential pulsed anodic stripping voltammetry (DPASV). The measured concentrations were used to calculate the content of metals in the PM(10) total mass, and to estimate the enrichment factors and the correlations between PM(10), metal concentrations and meteorological data for the two sites. The mean PM10 concentration during the sampling period in the urban site exceeded the annual European Union (EU) standard (40 microg/m(3)) and, for some sampling days, the daily EU standard (50 microg/m(3)) was also exceeded. In opposite, both EU standards were never exceeded in the industrial site. The overall metal content was nearly double in the industrial site compared to the urban one, and the mean Ni concentration exceeded the EU annual limit value (10 ng/m(3)). The metals with the highest enrichment factor were Cd, Cu, Ni and Pb for both sites, suggesting a dominant anthropogenic source for these metals. Metal concentrations were very low and typical of rural background during Christmas holidays, when factories were closed. PM(10) total mass measurement is not a sufficient air quality index since the metal content of PM(10) is not related to its total mass, especially in sites with industrial activities. This measurement should be associated with the analysis of toxic metals.     

Monitoring of heavy metal partitioning in reef corals of Lakshadweep Archipelago, Indian Ocean

This paper focuses on the partitioning of trace metals in five selected coral species from Lakshadweep Archipelago, which remains as one of the least studied areas in the Indian Ocean. Based on the morphological features, selected coral species are classified as massive (Porites andrewsi), ramose or branching (Lobophyllia corymbosa, Acropora formosa and Psammocora contigua) and foliaceous (Montipora digitata). Relating trace metal concentrations with morphological features in skeleton, highest concentrations of all the trace metals (except Zn) were reported for the ramose type corals. In tissue, all the metals (essential as well as non essential) showed highest concentrations within the branching type corals. Irrespective of their growth characteristics/pattern, all species except P. contigua displayed higher concentrations of Pb, Ni, Mn and Cd within their skeleton compared to tissue which may exemplify a regulatory mechanism to avoid the build up of the concentrations of these metals in their bio-part, strikingly toxic metals like Cd and Pb. The concentrations of trace metals in the skeleton and tissues of these coral species were subjected to 3 way ANOVA based on non standardized original data and the results showed significant differences between metals and between species leading to high skeleton/ tissue - species interaction as well as skeleton/tissue - metal interaction. The significant values of student's t calculated are depicted in the form of Trellis diagrams.     

Application of Microwave Plasma Atomic Emission Spectrometry (MP-AES) for environmental monitoring of industrially contaminated sites in Hyderabad City

Recently introduced microwave plasma-atomic emission spectroscopy (MP-AES) represents yet another and very important addition to the existing array of modern instrumental analytical techniques. In this study, an attempt is made to summarize the performance characteristics of MP-AES and its potential as an analytical tool for environmental studies with some practical examples from Patancheru and Uppal industrial sectors of Hyderabad city. A range of soil, sediment, water reference materials, particulate matter, and real-life samples were chosen to evaluate the performance of this new analytical technique. Analytical wavelengths were selected considering the interference effects of other concomitant elements present in different sample solutions. The detection limits for several elements were found to be in the range from 0.05 to 5 ng/g. The trace metals analyzed in both the sectors followed the topography with more pollution in the low-lying sites. The metal contents were found to be more in ground waters than surface waters. Since a decade, the pollutants are transfered from Patancheru industrial area to Musi River. After polluting Nakkavagu and turning huge tracts of agricultural lands barren besides making people residing along the rivulet impotent and sick, industrialists of Patancheru are shifting the effluents to downstream of Musi River through an 18-km pipeline from Patancheru. Since the effluent undergoes primary treatment at Common Effluent Treatment Plant (CETP) at Patanchru and travels through pipeline and mixes with sewage, the organic effluents will be diluted. But the inorganic pollutants such as heavy and toxic metals tend to accumulate in the environmental segments near and downstreams of Musi River. The data generated by MP-AES of toxic metals like Zn, Cu, and Cr in the ground and surface waters can only be attributed to pollution from Patancheru since no other sources are available to Musi River.     

鞍山市环境空气颗粒物中重金属元素分布特征

研究了鞍山市环境空气中可吸入颗粒物(PM10和PM2.5)中重金属元素分布特征,结果表明鞍山市环境空气可吸入颗粒物中Zn、Pb、Al、Cu四种金属总和所占21种元素比例近85%。重金属元素在不同粒径颗粒物中的浓度水平有明显差别,更易富集在细颗粒物PM2.5上。     

Impact of sewage contaminated water on soil, vegetables, and underground water of peri-urban Peshawar, Pakistan

The use of sewage-contaminated municipal water for irrigation of crops is an old practice in many big cities of Pakistan. Since the wastewater is rich in nutrients, it increases crops yield substantially but at the cost of food quality. The objective of this study was to investigate sewage water irrigation as a source of accumulation of heavy metals in soil and its subsequent transfer to crops and underground water. Sewage water, soil, groundwater, and crop samples were collected from selected areas around Peshawar city and analyzed for heavy metals concentration by atomic absorption spectroscopic method. Analysis of data revealed a considerable impact of the irrigation practices in the peri-urban Peshawar. Statistical analysis of the data showed a positive correlation between heavy metals concentration and soil carbon contents on the one hand and cation exchange capacity on the other. A strongly negative correlation was observed between metal contents and soil pH. The vertical movement of heavy metals from contaminated soil has polluted crops and underground water. The results indicated higher concentration of toxic metals in soil accumulated due to long-term sewage-contaminated water irrigation and their subsequent transfer to our food chain. The practice, if continued un-noticed may pose a threat of phytotoxicity to the local population.     

Assessment of air pollution from small scale industry

Air pollution due to small scale industries have been found tocause serious occupational health hazards and adverse effects on vegetation and heritage. The study for air pollution impactassessment for brick kiln industries was undertaken. The stackmonitoring exercise was carried out to estimate the pollution level of SPM, SO₂, and NO_x. The ambient air quality was also measured in the vicinity of brick kilns to assess the impact of stack emission on ground level concentration. Characterisation of SPM for toxic metals were studied. Modelling exercise was carried to predict the impact of emission of brick kiln on surrounding environment. To minimise the emission level and ground level concentration, airpollution mitigation measures are suggested.     

Use of feathers of feral pigeons (Columba livia) as a technique for metal quantification and environmental monitoring

This study quantifies metal concentrations in washed and unwashed feathers of feral pigeons (Columba livia). The material was collected in two different sites: Goiania (capital of Goiás State), with high anthropic activities, and Jataí (a city in Goiás), with low anthropic activities. Results revealed that metals such as Pb, Cr, and Cd were deposited in the feathers originating from air and soil (exogenous process). Other metals such as Cu, Fe, Mn, and Zn, which are part of the tissue constitution of a living being, were absorbed through the pigeons' diet (endogenous process). There was a statistically significant difference between mean values of Cd, Pb, and Cr in the three collection sites. The order of metal concentrations were Civic Square > Zoo > Jataí, which shows highest levels of metal contamination in anthropic environments. Significant differences between Cd, Pb, and Cr in washed and unwashed feathers suggest that metal concentrations are directly related to exposure time due to exogenous sources. We concluded that it is possible to quantify and monitor metal levels in the environment by analyzing the feathers of urban feral pigeons. Furthermore, unwashed feathers were especially efficient to investigate endogenous and exogenous absorption of the metals in our study.