Vertical distribution of heavy metals in soil profile in a seasonally waterlogging agriculture field in Eastern Ganges Basin

The accumulation of heavy metals in soil and water is a serious concern due to their persistence and toxicity. This study investigated the vertical distribution of heavy metals, possible sources and their relation with soil texture in a soil profile from seasonally waterlogged agriculture fields of Eastern Ganges basin. Fifteen samples were collected at ～0.90-m interval during drilling of 13.11 mbgl and analysed for physical parameters (moisture content and grain size parameters: sand, silt, clay ratio) and heavy metals (Fe, Mn, Cr, Cu, Pb, Zn, Co, Ni and Cd). The average metal content was in the decreasing order of Fe?>?Mn?>?Cr?>?Zn?>?Ni?>?Cu?>?Co?>?Pb?>?Cd. Vertical distribution of Fe, Mn, Zn and Ni shows more or less similar trends, and clay zone records high concentration of heavy metals. The enrichment of heavy metals in clay zone with alkaline pH strongly implies that the heavy metal distributions in the study site are effectively regulated by soil texture and reductive dissolution of Fe and Mn oxy-hydroxides. Correlation coefficient analysis indicates that most of the metals correlate with Fe, Mn and soil texture (clay and silt). Soil quality assessment was carried out using geoaccumulation index (I _geo), enrichment factor (EF) and contamination factor (CF). The enrichment factor values were ranged between 0.66 (Mn) and 2.34 (Co) for the studied metals, and the contamination factor values varied between 0.79 (Mn) and 2.55 (Co). Results suggest that the elements such as Cu and Co are categorized as moderate to moderately severe contamination, which are further confirmed by I _geo values (0.69 for Cu and 0.78 for Co). The concentration of Ni exceeded the effects-range median values, and the biological adverse effect of this metal is 87 %. The average concentration of heavy metals was compared with published data such as concentration of heavy metals in Ganga River sediments, Ganga Delta sediments and upper continental crust (UCC), which apparently revealed that heavy metals such as Fe, Mn, Cr, Pb, Zn and Cd are influenced by the dynamic nature of flood plain deposits. Agricultural practice and domestic sewage are also influenced on the heavy metal content in the study area.     

Trace element concentration in groundwater of Pesarlanka Island, Krishna Delta, India

There is a growing concern over the potential accumulation of trace element concentration in groundwater of coastal aquifer owing seawater encroachment in the last several decades. A total of 29 groundwater samples collected from Pesarlanka Island, Krishna delta, Andhra Pradesh, India were analyzed for 13 trace elements (B, V, Mn, Fe, Ni, Co, Cu, Zn, As, Sr, Cd, Ba, and Pb) using inductively coupled plasma mass spectrometry. The results reveal that B, Fe, Ni, As, Sr, and Pb vary from 11.22 to 710.2, 1.25 to 684.6, 0.02 to 37.33, 27.8 to 282.3, 164.1 to 7,009, and 1.97 to 164.4 μg/l, respectively. Ba, Cd, Co, Cu, Ni, V, and Zn are almost within permissible limits for drinking water, but As, Fe, Mn, Pb, B, and Sr are above the permissible limit. The toxic element Pb is 1.64 times more than the maximum permissible limits of drinking water. The minimum value of As is also 2.78 times more, whereas the maximum is 28.2 times the permissible limit. The spatial distributions of alkaline earths (Sr, Ba), transition metals (V, Co, Ni, Fe), metallic elements (Cu, Pb), and (As) were found in considerable variation in the entire Island. Good cross-correlations were found between As, B, Co, and Sr with total dissolved solids and among other trace elements such as B, As, Co, and Sr. The variability observed within the groundwater samples is closely connected to the sea spray input; hence, it is primarily a consequence of geographical and meteorological factors, such as distance from the ocean and time of year. The trace element levels, in particular those of heavy metals, are very low, suggesting an origin from natural sources rather than from anthropogenic contamination. A few trace elements (Sr and B) are found as sensitive parameters responding to changes in fresh to saline groundwater environment. The highly elevated trace elements in this area which may be attributed to marine sediments or death and decay of plants are presented in this paper.     

Distribution of Iron, Manganese, Zinc and Atrazine in Groundwater in Parts of Palar and Cheyyar River Basins, South India

A study was carried out in a part of Palar and Cheyyar river basin to evaluate the current status of iron, manganese, zinc and atrazine concentrations, their origin and distribution in groundwater. Groundwater samples were collected during post-monsoon (March 1998 and February 1999) and pre-monsoon (June 1999) periods from 41 sampling wells distributed throughout the study area. The groundwater samples were analyzed for trace metals using AAS and atrazine using HPLC. The concentration of the trace elements in groundwater is predominant during pre-monsoon period. Distribution pattern indicates that the concentration of these elements increases from west to northeast and towards Palar river. Lower concentrations in the central part may be due to recharge of fresh water from the lakes located here. During most of the months, as there is no flow in Palar river, the concentrations of trace elements in groundwater are high. Drinking water standards indicate that Mn and Zn cross the permissible limit recommended by EPA during the pre-monsoon period. A comparison of groundwater data with trace element chemistry of rock samples shows the abundance of trace elements both in the rock and water in the order of Fe > Mn > Zn and Fe > Zn > Mn. This indicates that iron in groundwater is derived from lithogenic origin. Further, Fe, Mn and Zn have good correlation in rock samples, while it is reverse in the case of water samples, indicating the non-lithogenic origin of Mn and Zn. Atrazine (a herbicide) was not detected in any of the groundwater samples in the study area, perhaps due to low-application rate and adsorption in the soil materials.     

An investigation of heavy metal and migration through groundwater from the landfill area of Eskisehir in Turkey

This paper was conducted in order to determine the groundwater and soil pollution within and around the landfill of Eskisehir, Turkey. In this paper, mud, leachate and groundwater samples were collected seasonally a year from near Eskisehir landfill-site to investigate the possible impact of leachate which affects soil and groundwater quality. Concentrations of various heavy metals (Fe, Cu, Zn, Mn, Co, Pb, Cr, Ni and Mo) were determined in mud, leachate and groundwater samples. In addition, the heavy metal transportation infiltrated from landfill through a porous medium into the groundwater was modelled in order to determine the potential groundwater pollution caused by the leachate of the landfill. The modelling of the contaminant transportation was carried out by using a multiflow computer programme which simulates the distribution of heavy metal concentrations. As a result of this study, the distribution of the contaminant concentration was modelled and determined with respect to time and distance. Hence, the contaminant concentrations were determined at any time interval according to distance. The heavy metal contamination in groundwater does not affect the wells found at far points from the source in a short time, e.g. 10, 20 and 30 days according to the obtained experimental results. When the time intervals extended more than 1 year, heavy metal concentrations decrease with distance but the concentration of the contamination increases when it gets closer to the pollution source. In this study, the potential contamination of groundwater was effectively estimated.     

Metal Pollution Assessment of Sediment and Water in the River Hindon, India

The metal pollution in water and sediment of the River Hindon in western Uttar Pradesh (India) was assessed for Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn. The metal concentrations in water showed wide temporal variation compared with bed sediment because of variability in water discharge and variations in suspended solid loadings. Metal concentrations in bed sediments provided a better evaluation of the degree and the extent of contamination in the aquatic environment, Santagarh and Atali being the most polluted sites of the river. The ratio of heavy metals to conservative elements (Fe, Al, etc.) may reveal the geochemical imbalances due to the elevated metal concentrations normally attributed to anthropogenic sources. Metal/Al ratios for the bed sediments of the river Hindon were used to determine the relative mobility and general trend of relative mobility occurred Fe > Mn > Zn > Cr > Ni > Pb > Cu > Cd.     

Assessment of heavy metal contamination in Candarli Gulf sediment, Eastern Aegean Sea

Concentrations of selected heavy metals (Fe, Mn, Ni, Cu, Zn, Pb, Hg, Cr, Al, and As) in surface sediments from 18 stations in the Candarli Gulf were studied in order to understand current metal contamination due to urbanization and economic development in Candarli region, Turkey. The sediment samples were collected by box corer in Candarli Gulf in 2009 to assess heavy metal pollution. Heavy metal concentrations in surface sediment varied from 1.62% to 3.60% for Fe, 0.38?C2.53% for Al, 173?C1,423 for Mn, 8?C100 for Ni, 3?C46 for Cu, 55?C119 for Zn, 16?C138 for Pb, 0.2?C6.3 for Hg, 16?C71 for Cr, and 11?C37 mg kg^???1 for As. This study showed that the concentrations of Mn, Ni, Zn, Pb, Hg, and Cr in the surface sediment layers were elevated when compared with the subsurface layers. Both metal enrichment and contamination factors show that Hg, Zn, and Pb contamination exists in the entire study area and contamination of other metals is also present in some locations depending on the sources.     

Assessment and spatial distribution of groundwater quality in industrial areas of Ghaziabad, India

An attempt has been made in this study to evaluate the groundwater quality in two industrial blocks of Ghaziabad district. Groundwater samples were collected from shallow wells, deep wells and hand pumps of two heavily industrialized blocks, namely Bulandshahar road industrial area and Meerut road industrial area in Ghaziabad district for assessing their suitability for various uses. Samples were collected from 30 sites in each block before and after monsoon. They were analyzed for a total of 23 elements, namely, Ag, Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Se, U, V, and Zn. In addition to these elements, some other parameters were also studied viz: color, odor, turbidity, biological oxygen demand, chemical oxygen demand (COD), dissolved oxygen, total dissolved solids and total suspended solid. The water quality index was also calculated based on some of the parameters estimated. Out of the 23 elements, the mean values of 12 elements, namely, Al, As, Ca, Cd, Cr, Mg, Mn, Na, Ni, Pb, Se, and U, were higher than the prescribed standard limits. The concentrations (in milligram per liter) of highly toxic metals viz., Al, As, Cd, Cr, Ni, Pb, Se, and U, ranged from 1.33–6.30, 0.04–0.54, 0.005–0.013, 4.51–7.09, 0.14–0.27, 0.13–0.32, 0.16–2.11, and 0.10–1.21, respectively, in all groundwater samples, while the permissible limits of these elements as per WHO/BIS standards for drinking are 0.2, 0.01, 0.003, 0.05, 0.07, 0.01, 0.04, and 0.03 mg L^?1, respectively. The EC, pH, and COD in all samples varied from 0.74–4.21, 6.05–7.72, and 4.5–20.0 while their permissible limits are 0.7 dS m^?1, 6.5–8.5, and 10 mg L^?1, respectively. On the basis of the above-mentioned parameters, the water quality index of all groundwater samples ranged from 101 to 491, and 871 to 2904 with mean value of 265 and 1,174 based on two criteria, i.e., physico-chemical and metal contaminations, respectively while the prescribed safe limit for drinking is below 50. The results revealed that the groundwater in the two blocks is unfit for drinking as per WHO/BIS guidelines. The presence of elements like As, Se, and U in toxic amounts is a matter of serious concern.     

Ecological risk assessment of heavy metals in surface sediments of northern littoral zone of Lake Çıldır,Ardahan, Turkey

In this paper, the heavy metal levels (Cu, Pb, Zn, Ni, Mn, Fe, As, Cd, Cr, Hg), organic carbon, and chlorophyll degradation products were studied to prove their ecological effects in Lake Ç?ld?r, where fossil fuels are used as an energy source in the studied area for most of the year, and domestic waste from settlements is discharged directly into the lake. Sediment samples were collected from six sites on the northern shore of Ç?ld?r Lake, Turkey in November 2012. Enrichment (EF) and contamination factor (CF) values were determined, and Pollution Load (PLI) and Potential Ecological Risk (PER) indices were calculated. Average concentrations of heavy metals in the sediments were, in descending order, Fe?>?Mn?>?Zn?>?Ni?>?Cr?>?Cu?>?Pb?>?As?>?Cd?>?Hg, respectively. According to mean values, the source of these elements may be considered natural due to lack of enrichment in Cu, Pb, Zn, Ni, and Cr in the sediment samples. Regarding enrichment of As, Cd, Mn, and Hg, the highest EF belongs to Hg. PLI and PER values indicate there are moderate ecological risk in the lake.     

Heavy metal contaminations in the groundwater of Brahmaputra flood plain: an assessment of water quality in Barpeta District, Assam (India)

A study was conducted to evaluate the heavy metal contamination status of groundwater in Brahmaputra flood plain Barpeta District, Assam, India. The Brahmaputra River flows from the southern part of the district and its many tributaries flow from north to south. Cd, Fe, Mn, Pb, and Zn are estimated by using atomic absorption spectrometer, Perkin Elmer AA 200. The quantity of heavy metals in drinking water should be checked time to time; as heavy metal accumulation will cause numerous problems to living being. Forty groundwater samples were collected mainly from tube wells from the flood plain area. As there is very little information available about the heavy metal contamination status in the heavily populated study area, the present work will help to be acquainted with the suitability of groundwater for drinking applications as well as it will enhance the database. The concentration of iron exceeds the WHO recommended levels of 0.3 mg/L in about 80% of the samples, manganese values exceed 0.4 mg/L in about 22.5% of the samples, and lead values also exceed limit in 22.5% of the samples. Cd is reported in only four sampling locations and three of them exceed the WHO permissible limit (0.003 mg/L). Zinc concentrations were found to be within the prescribed WHO limits. Therefore, pressing awareness is needed for the betterment of water quality; for the sake of safe drinking water. Statistical analysis of the data was carried out using Special Package for Social Sciences (SPSS 16).     

Assessment of metal pollution in urban road dusts from selected highways of the Greater Toronto Area in Canada

Over the last several decades, there has been increased attention on the heavy metal contamination associated with highways because of the associated health hazards and risks. Here, the results are reported of an analysis of the content of metals in roadside dust samples of selected major highways in the Greater Toronto Area of Ontario, Canada. The metals analysed are lead (Pb), zinc (Zn), cadmium (Cd), nickel (Ni), chromium (Cr), copper (Cu), manganese (Mn), calcium (Ca), potassium (K), magnesium (Mg) and iron (Fe). In the samples collected, the recorded mean concentrations (in parts per million) are as follows: Cd (0.51), Cu (162), Fe (40,052), Cr (197.9), K (9647.6), Mg (577.4), Ca (102,349), Zn (200.3), Mn (1202.2), Pb (182.8) and Ni (58.8). The mean concentrations for the analysed samples in the study area are almost all higher than the average natural background values for the corresponding metals. The geo-accumulation index of these metals in the roadside dust under study indicates that they are not contaminated with Cr, Mn and Ca; moderately contaminate with Cd and K; strongly contaminated with Fe and Mg; strongly to extremely contaminated with Ni and Pb; and extremely contaminated with Cu and Zn. The pollution load index (PLI) is used to relate pollution to highway conditions, and the results show that PLI values are slightly low at different samples collected from Highways 401 and 404 and high in many samples collected from Highway 400 and the Don Valley Parkway. Highway 400 exhibits the highest PLI values.     

Distribution, speciation, and risk assessment of selected metals in the gold and iron mine soils of the catchment area of Miyun Reservoir, Beijing, China

In order to investigate the metal distribution, speciation, correlation and origin, risk assessment, 86 surface soil samples from the catchment area around the Miyun Reservoir, Beijing, including samples from gold and iron mine areas, were monitored for fractions of heavy metal and total contents. Most of the metal concentrations in the gold and iron mine soil samples exceeded the metal background levels in Beijing. The contents of most elements in the gold mine tailings were noticeably higher than those in the iron mine tailings. Geochemical speciation data of the metals showed that the residual fraction dominated most of the heavy metals in both mines. In both mine areas, Mn had the greatest the acid-soluble fraction (F1) per portion. The high secondary-phase fraction portion of Cd in gold mine samples indicated that there was a direct potential hazard to organisms in the tested areas. Multivariate analysis coupled with the contents of selected metals, showed that Hg, Pb, Cr, and Ni in gold mine areas represented anthropogenic sources; Cd, Pb, and Cr in iron mine areas represented industrial sources. There was moderate to high contamination of a few metals in the gold and iron soil samples, the contamination levels were relatively higher in gold mine than in iron mine soils.     

Heavy metals in Yeniçağa Lake and its potential sources: soil,water, sediment,and plankton

The distribution and accumulation of heavy metals (Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Mo, Cd, Sn, Ba, Pb) in the water, sediments, plankton of Yeniça?a Lake, and its potential sources (creeks, sewage, artesian well, soil) were investigated during 1-year study period as monthly or seasonally. Element analyses were performed by ICP–MS. Results showed that the trace and toxic elements (Al, As, Mn, Pb, Fe) concentration in lake water and/or its feeding sources were above the recommended water standards (WHO, EC, EPA, TS-266). It was found that the maximum accumulation of the heavy metals iron, aluminum, manganese, zinc, and barium in the sediment of Yeniça?a Lake. The accumulation order of trace metals were Fe > Al > Mn > Zn > Ba > Ni > Cr > As > Cu > Pb > Co > Mo > Sn > Cd in the lake, creeks sediment, and soil samples. The similar results suggest that the accumulation of heavy metals in the sediment is a natural process. Metals accumulated in the lake are naturally mixed from the soil. However, the presence of heavy metals in the analysis of artesian well water and sewage reveals that the transportation occurs also from the groundwater to the lake. The results obtained in plankton in Yeniça?a Lake showed that aluminum, iron, manganese, zinc, and barium were most accumulated elements in the plankton. The lower averages of lead prevalent in the water and sediment during some months were seen to have a significant mean accumulation in the plankton.     

Soil heavy metal content on the hillslope region of Rio de Janeiro,Brazil: reference values

The increasing concern regarding the preservation of soil quality suggests the adoption of quality reference values as a first step in environmental monitoring actions. In this context, the objective of this study was to establish soil quality reference values for Al, Zn, Mn, Cd, Fe, Pb, Ni, Cr, and Cu and to correlate several soil properties with the occurrence of these elements in the hillslope region of Rio de Janeiro State. Sixty-two samples were collected at depths of 0–20 and 20–40 cm and analyzed using the USEPA method 3051A. After clustering analysis, the samples were separated into three groups. Classification functions were obtained based on the variables pH - Mg - Fe - Mn, i.e., the variables that were best related to heavy metal content. We determined to establish the quality reference values for the 75th percentile of the three groups. The relief forms of the area, which facilitate the transport of soil fine-particle fractions and accumulation in lowlands, were revealed to be one of most important factors in understanding the distribution of soil heavy metals.     

Heavy metal contamination in water, soil, and vegetables of the industrial areas in Dhaka, Bangladesh

Concentrations of Cu, Zn, Pb, Cr, Cd, Fe, and Ni have been estimated in soils and vegetables grown in and around an industrial area of Bangladesh. The order of metal contents was found to be Fe > Cu > Zn > Cr > Pb > Ni > Cd in contaminated irrigation water, and a similar pattern Fe > Zn > Ni > Cr > Pb > Cu > Cd was also observed in arable soils. Metal levels observed in different sources were compared with WHO, SEPA, and established permissible levels reported by different authors. Mean concentration of Cu, Fe, and Cd in irrigation water and Cd content in soil were much above the recommended level. Accumulation of the heavy metals in vegetables studied was lower than the recommended maximum tolerable levels proposed by the Joint FAO/WHO Expert Committee on Food Additives (1999), with the exception of Cd which exhibited elevated content. Uptake and translocation pattern of metal from soil to edible parts of vegetables were quite distinguished for almost all the elements examined.     

Spatial Characterization and Prioritization of Heavy Metal Contaminated Soil-Water Resources in Peri-Urban Areas of National Capital Territory (NCT), Delhi

Due to rapid industrialization and urbanization during last two decades, contamination of soils by heavy metals is on an increase globally. Lands under peri-urban agriculture are the worst affected. In NCT, Delhi about 14.4% of land area is chemically degraded. In order to take care of this problem, recently the Supreme Court of India ordered to shift various non-confirming (about 39,000 units) industries to regions outside NCT, Delhi. However in spite of this, there have been several reports and parliamentary debates on the phyto-toxicity and extensive accumulation of heavy metals in the region. Literature review revealed that the basis of these debates is a few studies on some point locations in/around Delhi. It was further observed that information on the distribution and extent of heavy metal pollution problem in the region was completely missing. The present study was thus basically aimed at assessing the spatial distribution/extent and type of heavy metal pollution in the study area, for enabling future designing of appropriate site-specific management measures by the decision makers.For this, detailed spatial information on bio-available heavy metal concentrations in the soils and surface/sub-surface waters of NCT (Delhi) was generated through actual soil/water surveys, standard laboratory methods and GIS techniques. The study showed that concentration of all micronutrients (viz. Zn: 0.05–0.18 ppm; Cu: in traces; Fe: 0–0.5 ppm; and Mn: 0–1.2 ppm) and most heavy metals (viz. Ni: 0–0.7 ppm; Pb: 0–0.15 ppm and Cd: in traces) in the surface/sub-surface irrigation waters were well within permissible limits. However Cr concentrations in irrigation waters of Alipur and Shahdara blocks were far above their maximum permissible limit of 1 ppm. It was further observed that Ni and Cr concentrations in the drinking waters of almost entire test area were far above maximum permissible levels of 0.02 and 0.01 ppm, respectively. Bio-available concentrations of several heavy metals (viz. Pb: 0.1–2 ppm; Cd: traces; Ni: 0.05–2 ppm and Cr: 0–0.4 ppm) in the study area soils were also observed to be well within the maximum permissible limits. However there were point Cu contaminations (5–10 ppm) in the sewage-sludge amended soils of vegetable growing areas near south Shahdara block. This was attributed to increased Cu availability due to oxidized acidic conditions generated by over-irrigation of agricultural lands. Available Mn concentrations in Kanjhawala, western Najafgarh and Alipur soils were also observed to be above maximum permissible limit of 10 ppm. This was observed to be mainly due to the geology (i.e. presence of Mn rich sedimentary rocks) and prevalence of reduced acidic conditions, due to paddy cultivation, in these areas. It was further observed that there is acute zinc (Zn) deficiency (< 0.6 ppm) in paddy growing soils of north Kanjhawala, Alipur and some parts of Najafgarh and Shahdara blocks due to extensive leaching of available Zn fractions to lower soil horizons. Similar available Zn deficiencies in high pH (8.5) soils of areas around Bamnoli village in E-Najafgarh block were also observed.     

The comparison of heavy metal accumulation ratios of some fish species in Enne Dame Lake (Kütahya/Turkey)

The metal accumulation levels for muscle, skin, gill, liver and intestine tissues of some Cyprinidae species (Carassius carassius, Condrostoma nasus, Leuciscus cephalus and Alburnus alburnus) in Enne Dame Lake (Kütahya/Turkey), which is mostly fed by hot spring waters, were investigated. Analyses were performed for copper (Cu), zinc (Zn), manganese (Mn), iron (Fe), cobalt (Co), magnesium (Mg), nickel (Ni), chrome (Cr) and boron (B) using inductively coupled plasma-optic emission spectroscopy (ICP-OES), and cadmium (Cd) using atomic absorption spectrophotometer (AAS) utilizing microwave digestion techniques. The concentrations of the heavy metals found in the fish varied in the follow ing ranges: Cu: < DL-7.04, Zn: 6.96-357.25, Mn: < DL-20.70, Ni: < DL-6.21, Fe: 9.62-2500.33, Cr: < DL-1.74, Co: < DL-0.54, Cd: 0.01-0.27 and Mg: 197.44-904.90 mg/kg wet weight. While B had the second highest concentration in the water of the lake, it was not encountered in any tissue of the investigated species. In all tissues and the species, While the bioaccumulation factors (BAFs) of Mn, Zn, Fe and Cu were remarkably high, the BAFs of Mg, Cr, Co, and B were also fairly low or none. Although the heavy metal accumulation levels for the muscle were generally lower than other tissues, there were some exceptions. Cd level in the muscle of C. carassius was higher than the permissible limit stated by Turkish legislation, FAO and WHO. The mean metal amounts for all the investigated tissues and species are statistically compared and discussed in this study.     

Soil heavy metal contamination in an industrial area: analysis of the data collected during a decade

Soil contamination by heavy metals has become a serious problem mainly because, above certain concentrations, all metals have adverse effects on human health. In particular, the accumulation of heavy metals in agricultural soils leads to elevated uptake by crops and affects food quality and safety. In this paper, we present the results of a study carried out over a decade for evaluating the impact of a new industrial settlement in an area geared to agriculture and livestock and far from urban sites. We focus our study on the bioavailable fraction of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn in soil samples. Heavy metal concentrations in soil are analysed with both univariate and multivariate statistical procedures. The main goal of this paper is the development of a statistical procedure, based on a mix of multivariate analysis, able to compare field surveys carried out during different years and to characterize spatial and temporal changes in soil heavy metals concentrations.     

Distribution of heavy elements in urban and rural surface soils: the Novi Sad city and the surrounding settlements, Serbia

Concentrations of ten heavy elements (Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn), as well as the pH values, organic matter contents, and electrical conductivities were measured in the surface soil samples collected from 21 sites of urban areas in the city of Novi Sad, the second largest city in Serbia, its suburban settlement and the nearby villages. Range of the heavy element concentrations was from 0.16 mg/kg (for Hg) to 18,994 mg/kg (for Fe). Significantly higher Hg and Mn concentrations were observed in subgroups with rural and market garden samples in comparison to the subgroups with urban and grassland samples, respectively, while the contents of Pb found in the grasslands subgroup were significantly higher than in the subgroup with market garden soils. Only one sample of urban soil exceeded the maximum permissible value for Zn set by the relevant Serbian legislation. According to the Dutch soil quality standard, the Cd and Co concentrations in majority of the examined soils were higher than the target values for unpolluted soil. The content of Hg was above the target value in 52% of the samples, most of them belonging to the subgroup of market garden soils. The results for the Novi Sad city area were compared to the relevant data available for other cities in the Western Balkan Countries. Principal component analysis of data revealed seven outlying samples, while the rest of the analyzed samples were grouped together indicating similar heavy element patterns most probably due to mixed emission sources.     

Heavy Metal Levels in Biota and Sediments in the Northern Coast of the Marmara Sea

Concentration of Cd, Co, Cr, Ni, Zn, Fe, Mn, Pb and Cu were determinedin biota and sediment samples collected from the Marmara Sea in Turkey. The levels of Zn, Fe, Mn, Pb and Cu in the macroalgae are higher than previous studies in the Marmara Sea. Moreover, Cu and Zn concentrations at the present study are significantly high than Bosphorus and Black Sea algae. The order heavy metal concentrations in the mussel samples was: Fe > Zn > Ni > Mn > Cu > Pb > Cr > Cd > Co. The metal concentrations are generally lower when compared with the Black Sea mussels except Pb. At the same time, concentrations of Pb, Cu and Zn in the mussel species are lower when compared with the results in the Aegean Sea. The ranges of Mn and Cu in the tested fish samples are higher than Black Sea fish. On the other hand, Cd, Co, Cr, Zn and Pb concentrations are lower. The northern coast of the Marmara Sea having the highest metal concentrations in sediments as follows: Co, Cr, Ni, Fe at ?arköy ; Pb, Cu at M. Ere?li; Cd, Zn, Mn at Menek?e. The heavy metal levels in the sediment samples are lower than other areas in the Marmara Sea.