The effect of metals and ammonia on SO2 oxidation to sulphates in the ambient air

The effect of metals and ammonia on the relationship between mass concentrations of sulphur dioxide and sulphate in the air was studied near an aluminium plant over a 1-year period. Sulphur dioxide, sulphates and ammonia in the air as well as metals (Pb, Fe, Mn, Zn, Cu, Cd and Al) in the deposit were measured at four measuring sites.The levels of mass concentrations of SO₂ were low at all measuring sites while the levels of mass concentrations of sulphates in the air and concentrations of metals in the deposit were high. The levels of ammonia were found to decrease in relationship to the distance from the source of pollution.The relationship between the mass concentrations of sulphate and SO₂ can be described by the equation y=ax ^b ;where y is the percentage of sulphate sulphur in the total sulphur (sulphate and SO₂) and x is the mass concentration of the total sulphur in the air. The values of the coefficients a and b are characteristic of individual areas.As the results show the coefficients a and b obtained at a measuring site close to the plant and outside the urban area are characteristic of an industrial area. At control sites in the urban area the coefficients are characteristic of an urban area. At the measuring site close to the industrial zone and the centre of the urban area the interaction of the effects occurs. Therefore, the coefficient a is characteristic of an urban area and b of an industrial one.     

上海市浦东新区大气细颗粒物中重金属污染特征及来源解析

于2017年对浦东城区和郊区大气PM2.5中的重金属特征和来源进行了分析。结果表明,K、Fe、Na、Ca、Mg、Al等矿物元素为浦东新区PM2.5中含量最高的金属元素,其中K的年均值为297.3 ng/m^3。浦东城区的不同元素在季节变化上呈现较为不同的变化规律,郊区的金属元素值大部分呈现春季先逐月下降,在夏、秋季有起伏波动,在10月之后逐渐上升;沙尘+道路源+建筑扬尘、煤燃烧、工业排放、金属冶炼、船舶排放、海盐+垃圾焚烧+生物质燃烧为浦东城区PM2.5中重金属元素的6大类主要来源。其中沙尘+道路源+建筑扬尘对Ca的贡献率为82.7%,煤燃烧对As的贡献率为86.6%,工业排放对SO4^2-的贡献率达到65.9%,金属冶炼对Cr的贡献率为75.7%,船舶排放对V的贡献率为97.5%、海盐+垃圾焚烧+生物质燃烧对Cl^-的贡献率为93.0%。煤燃烧和金属冶炼主要来自于西部方向。船舶排放分布在长江口及其延伸带。浦东新区PM2.5中重金属元素的质量浓度与本地源排放强度、外界传输和大气扩散条件均有密切关系。     

Metal fractionation study on bed sediments of Hussainsagar Lake, Hyderabad, India

Hussainsagar Lake in the heart of Hyderabad City (India) receives toxic substances through five streams draining from a catchment area of 245 km². Of particular interest are heavy metals received from urban runoff as well as municipal sewage and industrial effluents. Heavy metals entering the lake get adsorbed onto the suspended sediments, which eventually settle down in the bottom of the lake. In this study, fractionation of metal ions has been studied on the bed sediments of Hussainsagar Lake in order to determine the ecotoxic potential of metal ions. Comparison of sediments with average shale values indicated anthropogenic enrichment with copper, nickel, lead, cadmium, and zinc. The risk assessment code as applied to the present study reveals that 10–17% of manganese, 10–18% of nickel, 14–24% of chromium, 10–19% of lead, 21–30% of cadmium, and 18–28% of zinc exist in exchangeable fraction and, therefore, comes under medium risk category and may enter into food chain. The association of these metals with the exchangeable fraction may cause deleterious effects to aquatic life. The present database will help in formulating guidelines for carrying out dredging operations under restoration programs in the Hussainsagar Lake.     

Characterizing ozone pollution in a petrochemical industrial area in Beijing,China: a case study using a chemical reaction model

This study selected a petrochemical industrial complex in Beijing, China, to understand the characteristics of surface ozone (O₃) in this industrial area through the on-site measurement campaign during the July–August of 2010 and 2011, and to reveal the response of local O₃ to its precursors’ emissions through the NCAR-Master Mechanism model (NCAR-MM) simulation. Measurement results showed that the O₃ concentration in this industrial area was significantly higher, with the mean daily average of 124.6 μg/m³ and mean daily maximum of 236.8 μg/m³, which are, respectively, 90.9 and 50.6 % higher than those in Beijing urban area. Moreover, the diurnal O₃ peak generally started up early in 11:00–12:00 and usually remained for 5–6 h, greatly different with the normal diurnal pattern of urban O₃. Then, we used NCAR-MM to simulate the average diurnal variation of photochemical O₃ in sunny days of August 2010 in both industrial and urban areas. A good agreement in O₃ diurnal variation pattern and in O₃ relative level was obtained for both areas. For example of O₃ daily maximum, the calculated value in the industrial area was about 51 % higher than in the urban area, while measured value in the industrial area was approximately 60 % higher than in the urban area. Finally, the sensitivity analysis of photochemical O₃ to its precursors was conducted based on a set of VOCs/NOx emissions cases. Simulation results implied that in the industrial area, the response of O₃ to VOCs was negative and to NOx was positive under the current conditions, with the sensitivity coefficients of ?0.16~?0.43 and +0.04~+0.06, respectively. By contrast, the urban area was within the VOCs-limitation regime, where ozone enhancement in response to increasing VOCs emissions and to decreasing NOx emission. So, we think that the VOCs emissions control for this petrochemical industrial complex will increase the potential risk of local ozone pollution aggravation, but will be helpful to inhibit the ozone formation in Beijing urban area through reducing the VOCs transport from the industrial area to the urban area.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

The 210Po and 210Pb levels in surface sediment samples in the Izmir Bay (Aegean Sea-Turkey)

Bottom sediments reflect in general the relative contamination of a sea area. Therefore, a great deal of monitoring work has been dedicated to the analysis of bottom sediments. Izmir Bay is a very important pollution centre in Turkish Aegean coast region due to a densely populated community, industrial complex and maritime transportation, and there are many streams flowing into the bay that pass through a number of industrial and agricultural areas. It had received the majority of domestic and industrial wastewaters until the wastewater treatment plant was constructed. It is well known that sediments play an important role as reservoirs of a fraction of the pollution in aquatic systems. Therefore, sediment samples were collected monthly from three stations which are located in the inner part of the bay during the period January to December 2003. Temporal variations and seasonal changes on their ²¹⁰Po and ²¹⁰Pb contents were examined, and the activity concentrations of ²¹⁰Po and ²¹⁰Pb were found to vary from 43±6 to 132±12 and 27±5 to 91±9 Bq kg^???1 dry wt, respectively. The highest values of those natural radionuclides were measured at Kar??yaka Station because of the current systems of the bay. Seasonally, the ²¹⁰Pb levels were found to increase during the winter time for all the stations.     

Heavy metal pollution of ambient air in Nagpur City

Heavy metals released from different sources in urban environment get adsorbed on respirable particulate matter less than 10 μm in size (PM₁₀) and are important from public health point of view causing morbidity and mortality. Therefore, the ambient air quality monitoring was carried out to study the temporal and special pattern in the distribution of PM₁₀ and associated heavy metal content in the atmosphere of Nagpur, Maharashtra State, India during 2001 as well as in 2006. PM₁₀ fraction was observed to exceed the stipulated standards in both years. It was also observed that minimum range of PM₁₀ was observed to be increased in 2006 indicating increase in human activity during nighttime also. Six heavy metals were analyzed and were observed to occur in the order Zn > Fe > Pb > Ni > Cd > Cr in 2006, similar to the trend in other metro cities in India. Lead and Nickel were observed to be within the stipulated standards. Poor correlation coefficient (R ²) between lead and PM₁₀ indicated that automobile exhaust is not the source of metals to air pollution. Commercial and industrial activity as well as geological composition may be the potential sources of heavy metal pollution. Total load of heavy metals was found to be increased in 2006 with prominent increase in zinc, lead, and nickel in the environment. Public health impacts of heavy metals as well as certain preventive measures to mitigate the impact of heavy metals on public health are also summarized.     

Concentrations of heavy metals in urban soils of Talcahuano (Chile): a preliminary study

Concentrations of Cd, Cr, Ni, Pb, and Zn in the top-(0–10 cm) and sub-surface (10–20 cm) soils of the Talcahuano urban area were measured. The main soil properties (organic matter, CaCO₃, pH, particle sizes) were determined for a network of representative sampling sites. The mean Cr, Ni, Pb, and Zn contents in the urban topsoil samples from Talcahuano (37.8, 22.6, 35.2, 333 mg kg⁻¹, respectively) were compared with mean concentrations for other cities around the world. The results revealed higher concentrations of heavy metals in topsoil samples than in sub-surface samples. The samples from IS1, IS2, and IS3, located in the Talcahuano industrial park, had higher Cr, Ni, Pb, and Zn contents than did samples from the other sites. This was probably due to local pollution by industrial (metallurgical) dust, although other diffuse pollution throughout the entire port region (shipyards, metallurgy, the dismantling of old ships), and contributions from the wind from adjacent industrial, storage, and vessel areas clearly played a role. Heavy metals were lowest in the sample taken on school grounds (SG).     

Simulation of Urban-Scale Air Pollution Patterns in Luxembourg: Contributing Sources and Emission Scenarios

The aim of this study is to investigate the air pollution situation in an urban area in southwestern Luxembourg and to simulate annual NO₂ and PM₁₀ concentrations in response to changes in meteorological conditions and emissions using a Gaussian dispersion model. Simulations are carried out for the years 1998–2006. Emission scenarios related to road transport and nonindustrial combustion are performed in order to predict changes of air pollution levels. Road transport is by far the most important local emission source in the study area. Scenarios with more stringent emission standards for vehicles, less traffic, and fewer heavy-duty vehicles lead to reductions of NO_x and primary PM₁₀ emissions. As a result, the annual NO₂ concentrations are decreasing in most parts of the study area and are below the European annual limit value of 40 μg?m^?3. In contrast, a scenario with increased use of wood pellets for domestic heating shows an increase in urban PM₁₀ concentration. The year-to-year variability of meteorological conditions accounts for the same magnitude of absolute NO₂ and PM₁₀ concentration changes as the emission scenarios. The comparison with measurements located in the study area shows that the model is able to predict urban-scale annual average air pollution. The proposed application results show that the model can be appropriate for policy-driven air quality management and planning queries.     

Characterization, Source Identification and Apportionment of Selected Metals in TSP in an Urban Atmosphere

To understand the metal distribution characteristics in the atmosphere of urban Islamabad, total suspended particulate (TSP) samples were collected on daily 12 h basis, at Quaid-i-Azam University campus, using high volume sampler. The TSP samples were treated with HNO₃/HClO₄ based wet digestion method for the quantification of eight selected metals; Fe, Zn, Pb, Mn, Cr, Co, Ni and Cd by FAAS method. The monitoring period ran from June 2001 to January 2002, with a total of 194 samples collected on cellulose filters. Effects of different meteorological conditions such as temperature, relative humidity, wind speed and wind direction on selected metal levels were interpreted by means of multivariate statistical approach. Enhanced metal levels for Fe (930 ng/m³), Zn (542 ng/m³) and Pb (210 ng/m³) were found on the mean scale while Mn, Cr, Co and Ni emerged as minor contributors. Statistical correlation study was also conducted and a strong correlation was observed between Pb-Cr (r=0.611). The relative humidity showed some significant influence on atmospheric metal distribution while other meteorological parameters showed weak relationship with TSP metal levels. Regarding the origin of sources of heavy metals in TSP, the statistical procedure identified three source profiles; automobile emissions, industrial/metallurgical units, and natural soil dust. The metal levels were also compared with those reported for other parts of the world which showed that the metal levels in urban atmosphere of Islamabad are in exceedence than those of European industrial and urban sites while comparable with some Asian sites.     

Inorganic Ion Levels of Soils and Streams in some Areas of Ogoniland, Nigeria as Affected by Crude Oil Spillage

The inorganic ion concentrations of soils and streams in the three locations (Yorla, Zaakpon and Goi) in Ogoniland,Nigeria affected by crude oil spillage were investigated. In general, inorganic ion concentrations of polluted soilsand streams varied significantly (p = 0.05) from those of unpolluted soils and streams. Anions such as nitrate (NO ₃ ^- ), sulphate (SO ₄ ^2- ) and chloride(Cl^-) showed significantly (p = 0.05) higher values inthe polluted soils and steams than in the unpolluted controls. The phosphate (PO ₄ ^3- ) values were lowerin the polluted soils and streams than in the unpolluted controls.PO ₄ ^3- , NO ₃ ^- , SO ₄ ^2- and Cl^- concentrations were generally significantly (p = 0.05) higher in soils and streams from Yorla, Zaakpon and their control than in Goi North, Goi South and Goi control.Exchangeable cations and trace metal concentrations weresignificantly (p = 0.05) higher in the polluted soils andstreams than in the unpolluted controls. Yorla and Zaakponpolluted soils and streams had higher concentrations of theexchangeable cations and trace metals compared to valuesfrom Goi, except for Na. Results also showed significantlyhigher values of heavy metals (Pb, Cd, Cr and Ni) in the polluted soils compared to their controls, and values werealso significantly (p = 0.05) higher in Yorla, Zaakpon andtheir control compared to Goi North, Goi South and Goicontrol. Values obtained in polluted streams were higherthan in the unpolluted though not significant at the 5%level (p = 0.05). The anionic and cationic concentrationsof Yorla and Zaakpon soils and streams were generally higherthan those of Goi, indicating that Yorla and Zaakpon areaswere more polluted than Goi.Although the concentrations of most of the anions andcations analysed in the polluted soils and streams werewithin the World Health Organisation's permissible valuesfor the protection of humans and environment, the streams ofYorla, Zaakpon and Goi are in general being polluted withinorganic ions. This may make these soils and streamsunacceptable for domestic and industrial uses if not treated,and soils (farmlands) may also become unsuitable for agricultural purposes.     

Seasonal Variations of PM10 and TSP in Residential and Industrial Sites in an Urban Area of Kolkata, India

The objective of the study is to investigate seasonal and spatial variations of PM₁₀ (particulate matter with aerodynamic diameter less than or equal to 10 μm) and TSP (total suspended particulate matter) of an Indian Metropolis with high pollution and population density from November 2003 to November 2004. Ambient concentration measurements of PM₁₀ and TSP were carried out at two monitoring sites of an urban region of Kolkata. Monitoring sites have been selected based on the dominant activities of the area. Meteorological parameters such as wind speed, wind direction, rainfall, temperature and relative humidity were also collected simultaneously during the sampling period from Indian Meteorological Department, Kolkata. The 24 h average concentrations of PM₁₀ and TSP were found in the range 68.2–280.6 μg/m³ and 139.3–580.3 μg/m³ for residential (Kasba) area, while 62.4–401.2 μg/m³ and 125.7–732.1 μg/m³ for industrial (Cossipore) area, respectively. Winter concentrations of particulate pollutants were higher than other seasons, irrespective of the monitoring sites. It indicates a longer residence time of particulates in the atmosphere during winter due to low winds and low mixing height. Spread of air pollution sources and non-uniform mixing conditions in an urban area often result in spatial variation of pollutant concentrations. The higher particulate pollution at industrial area may be attributed due to resuspension of road dust, soil dust, automobile traffic and nearby industrial emissions. Particle size analysis result shows that PM₁₀ is about 52% of TSP at residential area and 54% at industrial area.     

External Contribution to Urban Air Pollution

Elevated particulate matter concentrations in urbanlocations have normally been associated with local trafficemissions. Recently it has been suggested that suchepisodes are influenced to a high degree by PM₁₀sources external to urban areas. To further corroboratethis hypothesis, linear regression was sought betweenPM₁₀ concentrations measured at eight urban sites inthe U.K., with particulate sulphate concentration measuredat two rural sites, for the years 1993–1997. Analysis ofthe slopes, intercepts and correlation coefficientsindicate a possible relationship between urban PM₁₀and rural sulphate concentrations. The influences of winddirection and of the distance of the urban from the ruralsites on the values of the three statistical parametersare also explored. The value of linear regression as ananalysis tool in such cases is discussed and it is shownthat an analysis of the sign of the rate of change of theurban PM₁₀ and rural sulphate concentrations providesa more realistic method of correlation. The resultsindicate a major influence on urban PM₁₀ concentrations from the eastern side of the UnitedKingdom. Linear correlation was also sought using PM₁₀ data from nine urban sites in London and nearby ruralRochester. Analysis of the magnitude of the gradients andintercepts together with episode correlation analysisbetween the two sites showed the effect of transportedPM₁₀ on the local London concentrations. This articlealso presents methods to estimate the influence of ruraland urban PM₁₀ sources on urban PM₁₀ concentrations and to obtain a rough estimate of thetransboundary contribution to urban air pollution from thePM₁₀ concentration data of the urban site.     

Comprehensive monitoring of drinking well water quality in Seoul metropolitan city, Korea

In this research, the quality of drinking well waters from 14 districts around Seoul metropolitan city, Korea was assessed by measuring a number of parameters with established guideline (e.g., arsenic, fluoride, nitrate nitrogen, benzene, 1,2-dichloroethene, dichloromethane, copper, and lead) and without such criteria (e.g., hardness, chloride ion, sulfate ion, ammonia nitrogen, aluminum, iron, manganese, and zinc). Physical parameters such as evaporation residue (or total dissolved solids) and turbidity were also measured. The importance of each parameter in well waters was examined in terms of the magnitude and exceedance frequency of guideline values established by international (and national) health agencies. The results of this study indicate that among the eight parameters with well-established guidelines (e.g., WHO), arsenic and lead (guideline value of 0.01 mg?L^?1 for both) recorded the highest exceedance frequency of 18 and 16 well samples ranging in 0.06–136 and 2–9 mg?L^?1, respectively. As such, a number of water quality parameters measured from many well waters in this urban area were in critical levels which require immediate attention for treatment and continuous monitoring.     

Analysis of Heavy Metals in the Endometrial Tissue Using Electron Microscope

Objective This study was done to estimate whether heavy metals in the air may affect endometrial chemical composition. Materials and Methods A total of 30 albino Wistar rats were employed and randomly divided into three groups. The rats of Group 1 and 2 were acutely and sub-chronically exposed to the gas form of heavy metals, respectively. Group 3 was used as a control group. Endometrial tissue worth of heavy metals of the groups was measured in through using scanning electron microscope. Results A statistically no significant difference was found for endometrial chemical composition of all of the heavy metals (chrome, manganese, iron, cobalt, nickel, zinc and lead) between group 1 and 2 (p > 0.05). On the other hand, there was statistically significant difference for all of the heavy metals between group 1 and group 3 (p < 0.05), while there was statistically significant difference for chrome, manganese, iron, cobalt and nickel (p < 0.05), but zinc and lead (p > 0.05) between group 2 and 3. Conclusion Air pollutants of Pb and Zn resulting mostly from combustion of fossil fuels and certain special industrial process in Kirikkale may be a risk factor for the high pregnancy loses by changing endometrial homeostasis.     

Distribution of phthalate esters in topsoil: a case study in the Yellow River Delta, China

The Yellow River Delta (YRD) is a typical agricultural and petrochemical industrial area of China. To assess the current status of phthalate esters (PAEs) of soil residues, soil samples (0～20 cm) (n?=?82) were collected in Bincheng District, at the geographic center of the YRD. PAEs were detected in all topsoil samples analyzed, which indicated that PAEs are ubiquitous environmental contaminants. Concentrations of 11 PAEs are in the range of 0.794～19.504 μg g^?1, with an average value of 2.975 μg g^?1. It was presented that PAEs pollution in this area was weak and monotonously increasing along the rural–urban gradient. Higher concentrations were observed from roadsides (and/or gutters), densely anthropogenic activities areas (such as the urbanization and industrialization), and agriculture influence district, which mainly originated from construction waste, municipal sewage, agricultural waste and pesticide, discarded plastic effusion and atmospheric depositions. Concentrations of PAEs were weakly positivity correlated with soil organic carbon content and pH, which suggested both of them can affect the distribution of PAEs. The concentration of di (2-ethylhexyl) phthalate and di-n-butyl phthalate dominated in the 11 PAEs, with the average values of 0.735 and 1.915 μg g^?1, respectively, and accounted for 92.1 % of the whole PAEs’ concentrations. No significant differences of PAE congeneric profiles were observed between our work and others previously reported, which is consistent with the use of similar commercial PAEs around the world.     

Performances and application of a passive sampling method for the simultaneous determination of nitrogen dioxide and sulfur dioxide in ambient air

The performances and applicability of a diffusion tubesampler for the simultaneous measurements of NO₂ andSO₂ in ambient air were evaluated. SO₂ andNO₂are collected by the passive sampler using triethanolamine astrapping agent and are determined as sulphate and nitrite withion chromatography. The detection limit (2.3 g m^-3 ofNO₂ and 4.2 g m^-3 of SO₂ for two weekssampling) is adequate for the determination of concentrationsin urban and industrial areas. Precision of the method as RSDis in mean 5% for NO₂ and 12% for SO₂ at theconcentration levels in urban areas. Calibration of the methodwas performed in the field conditions by comparison between theresponses of sampler and the concentrations measured by thecontinuous monitors. High degree of linearity (correlationcoefficients > 0.8) is found between the passive sampler tubeand the continuous monitor data for both NO₂ and SO₂.To reduce the wind velocity influence on passive sampling ofdiffusion tubes, a protective shelter was tested in this study.The overall uncertainty of one measure for the optimised methodis estimated at 5 g m^-3 for NO₂ and 6g m^-3 for SO₂. Suitability of this passivesampling method for air pollution monitoring in urban areas wasdemonstrated by the results shown in this paper on a campaigncarried out in the French agglomeration.     

Adsorption studies and the removal of dissolved metals using pyrolusite as adsorbent

The adsorption of metals from aqueous solutions of Pb²⁺, Zn²⁺ and Mg²⁺ on naturally occurring pyrolusite have been studied. The chemical stability of the pyrolusite has been determined in NaOH, H₂SO₄, HNO₃, HCl, NaCl and NK₄Cl solutions of various concentrations. Adsorption of the metal ions followed the order Pb²⁺>Zn²⁺>Cd²⁺.The maximum adsorption of Pb²⁺ (100%) occurred at pH 7. the relation between the amount of Pb²⁺ adsorbed per unit weight of pyrolusite and the concentration of Pb²⁺ at equilibrium follows the Freundlich adsorption isotherm.The efficiency of pyrolusite has been demonstrated by removing lead from synthetic waste water. 100% and 96% removal of lead have been achieved from synthetic waste water containing 5 mg l^–1 and 120 mg l^–1 of Pb²⁺ respectively at pH 7. The results of these studies suggest that pyrolusite might provide an economical method for the removal of lead from industrial waste water.     

Characterization of As and trace metals embedded in PM10 particles in Puebla City, México

Forty-eight air-filter samples (PM₁₀) were analysed to identify the concentration level of partially leached metals (PLMs; As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and V) from Puebla City, México. Samples were collected during 2008 from four monitoring sites: (1) Tecnológico (TEC), (2) Ninfas (NIN), (3) Hermanos Serdán (HS) and (4) Agua Santa (AS). The results indicate that in TEC, As (avg. 424 ng m^?3), V (avg. 19.2 ng m^?3), Fe (avg. 1,202 ng m^?3), Cu (avg. 86.6 ng m^?3), Cr (41.9 ng m^?3) and Ni (18.6 ng m^?3) are on the higher side than other populated regions around the world. The enrichment of PLMs is due to the industrial complexes generating huge dust particles involving various operations. The results are supported by the correlation of metals (Mn, Cd and Co) with Fe indicating its anthropogenic origin and likewise, As with Cd, Co, Fe, Mn, Pb and V. The separate cluster of As, Fe and Mn clearly signifies that it is due to continuous eruption of fumaroles from the active volcano Popocatépetl in the region.