Leaching of atrazine, metolachlor and diuron in the field in relation to their injection depth into a silt loam soil

A field experiment was conducted on a Calcaric Cambisol soil to study the consequences of the penetration depth and properties of pesticides on the risk of subsequent leaching. Three pesticides with different mobility characteristics and bromide were injected at 30 cm (where soil organic matter (OM) was 2%) and 80 cm (soil OM 0.5%) on irrigated plots without a crop. The migration of injected solutes was assessed for two years by sampling the soil solution using six porous cups installed at 50 and 150 cm depth and by relating solute contents to drainage water flux estimated by the STICS model (Simulateur mulTIdisciplinaire pour les Cultures Standard). Pesticides injected at 30 cm were strongly retained so that no metolachlor or diuron was detected at 50 and 150 cm. The ratio of atrazine peak concentration in the soil solution to concentration in the injected solution (C/C₀) was 1 × 10⁻³ and 0.2 × 10⁻³, respectively, at 50 and 150 cm. When injected at 80 cm, (C/C₀) of atrazine, metolachlor and diuron were 10 × 10⁻³, 1 × 10⁻³ and 0.3 × 10⁻³ at 150 cm, respectively; 1/(C/C₀) was correlated with K_oc values reported from databases. The ratio of drainage volume to the amount of water at field capacity in the soil layer between the injection point at 30 cm and the water sampling level (V/V₀) at 50 and 150 cm was 0.6 and 0.9, respectively, for bromide and 1.6 and 1.0 for atrazine. V/V₀ of the injected solutes at 80 cm was for bromide, atrazine, metolachlor and diuron 0.6, 0.9, 1.2 and 1.7, respectively; pesticide V/V₀ was correlated with K_oc. The retardation factor was a good indicator of migration risk, but tended to overestimate retardation of molecules with high K_oc. Atrazine desorption represented an additional leaching risk as a source of prolonged low contamination. The large variability in soil solution of bromide and pesticide concentrations in the horizontal plane was attributed to flow paths and clods in the tilled soil layer. This heterogeneity was assumed to channel water fluxes into restricted areas and thereby increase the risk of groundwater contamination. The methodology used in the field proves to provide consistent results.     

Distribution of pesticides and heavy metals in trophic chain

Determination of triazines herbicides (atrazine and simazine) by high performance liquid chromatography (HPLC) in samples of trophic chain were worked out. Determination limits of 0.5 μg g⁻¹ for atrazine, 0.8 μg g⁻¹ for simazine with pesticides recovery of 70–77% in trophic chain samples were obtained. The content of simazine in soils was in range 1.72–57.89 μg g⁻¹, in grass 5–88 μg g⁻¹, in milk 2.32–15.29 μg g⁻¹, in cereals 10.98–387 μg g⁻¹, in eggs 30.14–59.48 μg g⁻¹, for fruits: 2.45–6.19 μg g⁻¹. The content of atrazine in soils was in range 0.69–19.59 μg g⁻¹, in grass 7.85–23.85 μg g⁻¹, in cereals 1.88–43.08 μg g⁻¹. Cadmium, lead and zinc were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) in the same samples as atrazine and simazine. Determination limits for cadmium 5 × 10⁻³ μg g⁻¹, for lead 1 × 10⁻² μg g⁻¹, and for zinc 0.2 × 10⁻³ μg g⁻¹, were obtained. The content of cadmium in soil was in range 0.13–5.89 μg g⁻¹, in grass 114–627.72 × 10⁻³ μg g⁻¹, in milk 8.88–61.88 × 10⁻³ μg g⁻¹, in cereals 0.20–0.31 μg g⁻¹, in eggs 0.11–0.15 μg g⁻¹, in fruits 0.23–0.59 μg g⁻¹. The content of lead in soils was in range 0.57–151.50 μg g⁻¹, in grass 0.16–136.57 μg g⁻¹, in milk 1.16–3.74 μg g⁻¹, in cereals 1.05–5.47 μg g⁻¹, in eggs 5.79–55.87 μg g⁻¹, in fruits 21.00–87.36 μg g⁻¹. Zinc content in soil was in range 9.15–424.5 μg g⁻¹, in grass 35.20–55.87 μg g⁻¹, in milk 20.00–34.38 μg g⁻¹, in cereals 14.94–28.78 μg g⁻¹, in eggs 15.67–32.01 μg g⁻¹, in fruits 14.94–18.88 μg g⁻¹.

Described below extraction and mineralization methods for particular trophic chains allowed to determine of atrazine, simazine, cadmium, lead and zinc with good repeatability and precision. Emphasis was focused on liquid–liquid extraction and solid-phase extraction of atrazine and simazine from analysed materials, as well as, on monitoring the content of herbicides and metals in soil and along trophic chain. Higher concentration of pesticides in samples from west region of Poland in comparison to that of east region is likely related to common applying them in Western Europe in relation to East Europe. The content of metals strongly depends on samples origin (industry area, vicinity of motorways).     

Vapour pressures, aqueous solubility, Henry's law constants and air/water partition coefficients of 1,8-dichlorooctane and 1,8-dibromooctane

New data on the vapour pressures and aqueous solubility of 1,8-dichlorooctane and 1,8-dibromooctane are reported as a function of temperature between 20 °C and 80 °C and 1 °C and 40 °C, respectively. For the vapour pressures, a static method was used during the measurements which have an estimated uncertainty between 3% and 5%. The aqueous solubilities were determined using a dynamic saturation column method and the values are accurate to within ±10%. 1,8-Dichlorooctane is more volatile than 1,8-dibromooctane in the temperature range covered (p_sat varies from 3 to 250 Pa and from 0.53 to 62 Pa, respectively) and is also approximately three times more soluble in water (mole fraction solubilities at 25 °C of 5.95 × 10⁻⁷ and 1.92 × 10⁻⁷, respectively). A combination of the two sets of data allowed the calculation of the Henry’s law constants and the air water partition coefficients. A simple group contribution concept was used to rationalize the data obtained.     

Copper complexation by tannic acid in aqueous solution

The speciation of titrated copper in a dissolved tannic acid (TA) solution with an initial concentration of 4 mmol organic carbon (OC)/l was investigated in a nine-step titration experiment (Cu/OC molar ratio = 0.0030–0.0567). We differentiated between soluble and insoluble Cu species by 0.45 μm filtration. Measurements with a copper ion selective electrode (ISE) and diffusive gradients in thin films (DGT) were conducted to quantify unbound Cu(II) cations (‘free’ Cu) and labile soluble Cu complexes. For the DGT measurements, we used an APA hydrogel and a Chelex 100 chelating resin (Na form). Insoluble organic Cu complexes (>0.45 μm) was the dominant Cu species for Cu/OC = 0.0030–0.0567 with a maximum fraction of 0.96 of total Cu. At Cu/OC > 0.0100, Cu-catalysed degradation of aggregate structures resulted in a strong increase of free Cu and (labile) soluble Cu complexes with a maximum fraction of 0.28 and 0.32 of total Cu, respectively. Labile (i.e. DGT-detectable) soluble Cu complexes had a relatively high averaged diffusion coefficient (D) in the APA hydrogel (3.50 × 10⁻⁶– 5.58 × 10⁻⁶ cm² s⁻¹).     

Concentrations of chlorine, bromine and iodine in Japanese rivers

Concentrations of halogens (Cl, Br and I) in 30 Japanese rivers were measured by ion chromatography and inductively coupled plasma mass spectrometry to understand their behavior in the terrestrial environment. Concentrations of Cl, Br and I in each river, obtained at 10 sampling points from the upper stream to the river mouth, tended to increase near the river mouth. The ranges of geometric means of Cl, Br and I in each river were 1.0–19.4 mg l⁻¹, 2.5–67.9 μg l⁻¹, and 0.18–8.34 μg l⁻¹, respectively. To compare halogen behavior, the concentration ratios, Br/Cl and I/Cl, were calculated. The Br/Cl range was (2.3–7.8) × 10⁻³ (geometric mean: 3.74 × 10⁻³), and it was nearly constant except for the Yoneshiro river. It was estimated that 60–80% of total Br in the middle to lower parts of this river was the excess Br. The Br chemical form in all the rivers is generally considered to be Br⁻. The I/Cl ratios had different trends in rivers flowing into the Japan Sea and Pacific Ocean, possibly due to the different geological features in the river catchments.     

Linear free energy relationships for dechlorination of aromatic chlorides by Pd/Fe

Reductive dechlorination rate constants for five chlorobenzenes in the presence of Pd/Fe as catalyst were determined experimentally. Linear free energy relationships (LFER) for the dechlorination rate constants of five chlorobenzenes and three chlorophenols were developed by partial least squares (PLS) regression based on quantum chemical parameters computed by PM3 Hamiltonian. The optimal LFER model obtained is

logk=−1.63+1.46×10⁻³ΔH_f−7.69×10⁻¹E_LUMO

where k stands for the dechlorination rate constants, ΔH_f is the standard heat of formation, and E_LUMO is the energy of the lowest unoccupied molecular orbital. The Q²_cum value of the model is 0.879, indicating good robustness and predictive power of the model.     

Isoprene emission from tropical trees in Okinawa Island, Japan

This study surveyed isoprene emission from 42 indigenous and exotic tropical trees in subtropic Okinawa, Japan. Of the 42 trees studied, 4 emitted isoprene at a rate in excess of 20 μg g⁻¹ h⁻¹, and 28 showed the rates of 1–10 μg g⁻¹ h⁻¹. The remainder emitted less than 1 μg g⁻¹ h⁻¹. The majority of trees in this study may therefore fall within the lower emitting species. However, species in Moraceae that is indigenous in Okinawa emitted isoprene at relatively higher rates with an average of 14.2 μg g⁻¹ h⁻¹. The highest emission rate of 107.1 μg g⁻¹ h⁻¹ for Ficus virgata yielded the area basis rate of 47.4 nmol m⁻² s⁻¹, which is almost equivalent to the rate of high emitting species. Furthermore, a linear relationship between light intensity and isoprene emission was noted with Ficus virgata up to 1700 μmol m⁻² s⁻¹. These findings may show the potential importance of subtropical areas as sources of isoprene to the atmosphere.     

Determination of 99Tc deposited on the ground within the 30-km zone around the Chernobyl reactor and estimation of 99Tc released into atmosphere by the accident

Technetium-99 was determined in samples from the 30-km zone around the Chernobyl reactor. Concentrations of ⁹⁹Tc in soil samples taken from three forest sites ranged from 1.1 to 14.1 Bq kg⁻¹ dry weight for the organic soil layers, and from 0.13 to 0.83 Bq kg⁻¹ dry weight for the mineral soil layers. In particular, for the organic layers, the measured ⁹⁹Tc concentrations were one or two orders of magnitude higher than those due to global fallout ⁹⁹Tc. The ⁹⁹Tc depositions (Bq m⁻²), based on the sum of the depositions measured in organic and mineral layers, ranged from 130 Bq m⁻² within the 10-km zone to about 20 Bq m⁻² close to the border of the 30-km zone. Taking the corresponding measured ¹³⁷Cs depositions into account, it was found that the activity ratio of ⁹⁹TW/¹³⁷Cs ranged from 6 × 10⁻⁵ to 1.2 × 10⁻⁴. It was estimated that about 970 GBq of ⁹⁹Tc had been released by the Chernobyl accident. This figure corresponded to 2%–3% of the total ⁹⁹Tc inventory in the core.     

Specific biomagnification of polychlorinated dibenzo-p-dioxins and dibenzofurans in tufted ducks (Aythya fuligula), common cormorants (Phalacrocorax carbo) and their prey from Lake Shinji,Japan

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/DFs) were detected in waterfowl such as common cormorants, tufted ducks, and their prey, namely fish and bivalves from Lake Shinji, Japan. The concentration of total PCDDs/DFs-TEQ was found to be higher in the muscle tissues of common cormorants than in those of tufted ducks. The results of hierarchical cluster analysis implied that the residue distribution pattern of PCDD/DF homologues was considerably different between these two species. Furthermore, biomagnification factors (BMFs) were estimated from bivalves as prey to tufted duck muscles as target organs. Despite the highest concentrations of 1,3,6,8- and 1,3,7,9-TeCDD in tufted ducks and their prey, however, the BMFs of these isomers were calculated to be lower than those of the toxic 2,3,7,8-substituted PCDDs/DFs. On the other hand, log BMF of toxic 2,3,7,8-substituted PCDDs/DFs were significantly higher for lower chlorinated isomers than those of the higher chlorinated isomers. The biota-sediment accumulation factors (BSAFs) of PCDDs/DFs were also estimated using shijimi clam and fish samples against sediment from Lake Shinji. The average BSAFs were estimated and ranged from 4.0×10⁻³ to 2.2×10⁻¹ and 2.0×10⁻⁴ to 2.0×10⁻¹ for bivalve and fish samples, respectively. Based on calculated BMFs and BSAFs, the total PCDD/DF-TEQ levels in the tufted duck were estimated to have been lowest (2.0 pg TEQ/g dry weight basis) in 1947 and highest (9.8 pg TEQ/g) in 1971.     

Determination of vapour pressures of nine organic chemicals adsorbed on silicagel

The vapour pressures of nine organic chemicals adsorbed on silicagel were determined by a method which can be standardized. They were compared with those of the non-absorbed, free compounds (range 6 × 10⁻³ – 7 × 10⁴ Pa).     

Short-term toxicity of pyraclofos used as a blackfly larvicide on non-target aquatic fauna in a tropical environment

Among the many larvicides tested for the control of s.l. larvae, the vector of human onchocerciasis in West Africa, pyraclofos proved to be 100% effective at 100 μg × L⁻¹ for 10 min in river, with a carry of 20 km at 100 m³ × sec⁻¹. Tests were then performed both in laboratory and field conditions to evaluate its toxicity on the non-target aquatic fauna. In experimental short-term gutter tests, the detachment of the total benthic insects was 35% at 100 μg × L⁻¹ for 10 min against 17% for temephos at the same dose and 59% for chlorphoxim at 50μg × L⁻¹ for 10 min. , and were the most affected organisms. The treatment of a river resulted in a considerable detachment of the same taxonomic groups, plus Orthocladiinae. On the other hand, investigations conducted in tanks showed that the 24-hr LC₅₀ for is 150 μg × L⁻¹ and that for 170 μg × L⁻¹, values which are not very different from the operational dose of the larvicide (100 μg × L⁻¹ for 10 min.). Nevertheless, in a river, no fish mortality was recorded. Based on fish LC₅₀ and drift of benthic insects, pyraclofos at 100 μg × L⁻¹ was judged to be less toxic to aquatic fauna in the short term than permethrin and carbosulfan.     

Reaction of arsenic vapor species with fly ash compounds: kinetics and speciation of the reaction with calcium silicates

In coal combustion systems, the partitioning of arsenic between the vapor and solid phases is determined by the interaction of arsenic vapors with fly ash compounds under post-combustion conditions. This partitioning is affected by gas–solid reactions between the calcium components of the ash particles and arsenic vapors. In this study, bench scale experiments were conducted with calcium compounds typical of coal-derived fly ash to determine product formation, the extent of reaction and reaction rates when contacted by arsenic oxide vapors. Experiments conducted with arsenic trioxide (As₄O_6(g)) vapors in contact with calcium oxide, di-calcium silicate and mono-calcium silicate over the temperature range 600–1000 °C indicated that these solids were capable of reacting with arsenic vapor species in both air and nitrogen. Calcium arsenate was the observed reaction product in all the samples analyzed. Maximum capture of arsenic occurred at 1000 °C with calcium oxide being the most effective of the three solids over the range of temperatures studied. Using a shrinking core model for a first order reaction and the results from intrinsic kinetic experiments conducted in air, the reaction rate constants were found to be 1.4×10⁻³exp(−2776/T) m/s for calcium oxide particles, 7.2×10⁻³exp(−3367/T) m/s for di-calcium silicate particles and 5.5×10⁻³exp(−3607/T) m/s for mono-calcium silicate particles. These results therefore suggest that any calcium present in fly ash can react with arsenic vapor and capture the metal in water-insoluble forms of the less hazardous As(V) oxidation state.     

Qualitative and quantitative cancer risk assessment of 2, 3, 7, 8-tetrachloro-dibenzo-p-dioxin (2, 3, 7, 8-TCDD)

The carcinogenicity of 2,3,7,8-TCDD at multiple organ sites in animals has been well established by several cancer bioassays. Results of two of the most notable of these, the Kociba et al. (1978) rat feeding study and the National Toxicology Program (1980) gavage study in rats and mice showed hepatocellular carcinomas in two strains of female rats and male and female mice. Other tumor sites included carcinomas of the lung, tongue, hard palate and nasal turbinates, thyroid, and subcutaneous tissue. The evidence for carcinogenicity of 2,3,7,8-TCDD in animals is regarded as “sufficient” using the classification system of the International Agency for Research on Cancer (IARC).

Two Swedish epidemiologic case-control studies (Hardell and Sandstrom, 1979; Eriksson et al. 1979, 1981) reported a significant five- to sevenfold excess risk of soft-tissue sarcomas (STS) from occupational exposure to chlorinated phenoxyacetic acid herbicides and/or chlorophenols. Additionally, several small cohort studies collectively exhibited an unusual cluster of STS, significantly increased over combined expected incidence. Problems with these studies do not appear to be sufficient to discount this excess risk. The human evidence alone for the carcinogenicity of 2,3,7,8-TCDD is “inadequate” using the IARC classification. However, for 2,3,7,8-TCDD in combination with chlorinated phenoxyacetic acid herbicides and/or chlorophenols, the human evidence is considered to be “limited.” The overall evidence for carcinogenicity considering both animal and human studies would place 2,3,7,8-TCDD alone in the IARC category 2B, meaning that the substance is probably carcinogenic in humans. The overall weight of evidence for 2,3,7,8-TCDD in combination with chlorinated phenoxyacetic acid herbicides and/or chlorophenols is regarded as IARC category 2A, also meaning that they are probably carcinogenic for humans.

Using current EPA methodology for quantitatively estimating cancer risks, several animal data sets have been analyzed. Comparing the results, the upper-limit incremental unit risk estimate is 1.6 × 10⁻² for a lifetime exposure of 1 ng/kg/day. This estimate is derived from a lifetime feeding study (Kociba et al., 1978) in which 2,3,7,8-TCDD induced tumors of the liver, lungs, hard palate, and nasal turbinates in female rats. Incremental unit cancer risks are also extrapolated for lifetime 2,3,7,8-TCDD exposures in water and air. Based on continuous lifetime exposure to 1 ng/L 2,3,7,8-TCDD in drinking water, the upper-limit estimate of extra cancer risk per individual is 4.5 × 10⁻³. For lifetime exposure to 1 pg 2,3,7,8-TCDD/m³ in the ambient air, the upper-limit individual risk is 3.3 × 10⁻⁵.     

Phytoremediation of radiostrontium ((90)Sr) and radiocesium ((137)Cs) using giant milky weed (Calotropis gigantea R.Br.) plants

Potential of plants to remove radionuclides/toxic elements from soils and solutions can be successfully applied for removal of important radionuclides such as strontium-90 (⁹⁰Sr) and cesium-137 (¹³⁷Cs). When uptake of ¹³⁷Cs and ⁹⁰Sr by Calotropis gigantea plants incubated in distilled water spiked with the radionuclides either alone or in combination was studied, it was found to have a high efficiency for the removal of ⁹⁰Sr, with 90% being removed from solutions (5 × 10³ kBq l⁻¹) within 24 h of incubation. However, in case of ¹³⁷Cs, about 44% could be removed from solutions (5 × 10³ kBq l⁻¹) at the end of 168 h of incubation. Accumulation of ⁹⁰Sr and ¹³⁷Cs was higher in roots compared to shoots. The plants could remediate both ⁹⁰Sr and ¹³⁷Cs when they were added together to the solution. When two months old plants were incubated in low level nuclear waste, 99% of activity disappeared at the end of 15 days. The present study suggests that C. gigantea could be used as a potential candidate plant for phytoremediation of ⁹⁰Sr and ¹³⁷Cs.     

Copper complexation by dissolved organic matter and uncertainty assessment of their stability constants

The interaction of Cu with dissolved organic matter (DOM, extracted from an organic forest floor) was investigated and the resulting data was evaluated in terms of their uncertainty. The speciation of Cu over ‘free’ Cu (as analysed by diffusive gradients in thin films (DGT)), dissolved Cu–DOM complexes and precipitated Cu–DOM was determined as a function of pH (3.5, 4.0 and 4.5) and Cu/C ratio. The dissolved organically bound fraction was highest at pH 4.5, but this fraction decreased with increasing Cu/C ratio, which was observed for all pH levels. In the range of Cu/C=7×10⁻⁵–2.3×10⁻² (mol/mol) the precipitated fraction was very small. The speciation of both Al and Fe was not affected by increasing Cu concentrations. From a continuous distribution model using the Scatchard approach, we calculated the optimal fit and corresponding upper and lower 95% uncertainty bounds of the overall stability constants (K_o) with the shuffled complex evolution Metropolis (SCEM) algorithm. Although the optimal equation fitted the data very well, the uncertainty of the, according to literature, most reliable approach to establish stability constants, was still large. Accordingly, the usually reported intrinsic stability constants exhibited large uncertainty ranging from logK_i=6.0–7.1 (optimal 6.7) for pH 3.5, logK_i=6.5–7.1 (optimal 6.8) for pH 4.0, and logK_i=6.4–7.2 (optimal 6.8) for pH 4.5 and showed only little effect of pH.     

Electrochemical oxidation of benzene on boron-doped diamond electrodes

This work presents an electrochemical investigation of the benzene oxidation process in aqueous solution on boron-doped diamond (BDD) electrodes. Additionally, in order to determine the main products generated during the oxidation process, electrolysis and high performance liquid chromatography experiments were carried out. The complete degradation of this compound was performed aiming to a further application in waste water treatment. The cyclic voltammetry studies indicate that benzene is irreversibly oxidized in acid medium (H₂SO₄ 0.5 M) on the BDD electrode surface at 2.0 V versus Ag/AgCl in a diffusion controlled process. During the cycling, other products are generated, and a pair of peaks was observed that can be associated with the oxi-reduction of anyone of the following species: hydroquinone, benzoquinone, resorcinol or catechol. The electrolysis experiments were carried out at 2.4 and 2.5 V on the BDD electrode surface in a solution containing 1 × 10⁻² M of benzene (below the saturation concentration in aqueous solution), for 3 and 5 h, respectively. The main products measured were: hydroquinone, resorcinol, p-benzoquinone, catechol and phenol. The complete electrochemical benzene degradation was performed in the electrolysis experiments using a rotating BDD disc electrode (2.5 V for 5 h) and the main products detected were all measured at concentrations lower than 10⁻⁵ M in this condition. The boron-doped diamond electrode had proved to be a valuable tool for the electrochemical degradation of the benzene, a very stable chemical compound.     

Direct measurement of denitrification activity in a Gulf coast freshwater marsh receiving diverted Mississippi River water

Wetland loss along the Louisiana Gulf coast and excessive nitrate loading into the Gulf of Mexico are interrelated environmental problems. Nitrate removal by soil denitrification activity was studied in a ponded freshwater marsh receiving diverted Mississippi River water for the purpose of reversing or slowing wetland loss. Labeled ¹⁵N-nitrate was applied at 3.8 g N m⁻² into four replicate study plots after removing above ground vegetation. Nitrogen gas (N₂) and nitrous oxide (N₂O) emissions from the plots were determined by isotope ratio mass spectrometry (IRMS). Nitrous oxide emissions were also compared with the results determined by gas chromatograph (GC). Results showed that it took 2 weeks to remove the added nitrate with N₂O emission occurring over a period of 4 d. The apparent denitrification dynamics were assumed to follow the Michaelis–Menten equation. The maximum denitrification rate and K_m value were determined as 12.6 mg N m ⁻² h⁻¹, and 6.5 mg N l⁻¹, respectively. Therefore the maximum capacity for nitrate removal by the marsh soil would be equivalent to 110 g N m⁻² yr⁻¹, with more than 30% of nitrogen gas evolved as N₂O. For typical nitrate concentrations in Mississippi River water of about 1 mg N l⁻¹, nitrate would be removed at a rate of 14.7 g N m⁻² yr⁻¹ with N₂O emission about 1.5%. A denitrification dynamic model showed that the efficiency of nitrate removal would largely depend on the water discharge rate into the ponded wetland. Higher discharge rate will result in less retention time for the water in the marsh where nitrate is denitrified.     

Relationship between electron donor and microorganism on the dechlorination of carbon tetrachloride by an anaerobic enrichment culture

An investigation involving the supplement of different concentrations of substrates and microorganisms was carried out under anaerobic condition to assess the feasibility of bioremediation of carbon tetrachloride (CCl₄) with the amendment of low concentrations of auxiliary substrate and microorganisms. The concentrations of substrate and microorganisms ranged from 10 to 100 mg/l and from 3.7 × 10⁴ to 3.7 × 10⁶ cell/ml, respectively. The biotransformation rate of CCl₄ increased progressively with the increase in the concentrations of the substrate and microorganisms. In the low biomass-amended system (3.7 × 10⁴cells/ml), 28–71% and 57–96% of CCl₄ removals were exhibited when 10–100 mg/l of acetate or glucose was supplemented, respectively, whereas nearly complete degradation of CCl₄ was observed in the heavily inoculated systems (3.7 × 10⁶ cells/ml). An addition of electron donor in the low microbial activity batches enhanced greater efficiency in dechlorination than in the high microbial activity batches. The second-order rate constants ranged from 0.0059 to 0.0092 l/mg/day in high biomass input system, while a two- to four-fold increase in rate constant was obtained in the low microbial activity system. This study indicates that biomass was the more important environmental parameter than substrate affecting the fate of CCl₄. The addition of auxiliary substrates was effective only in low biomass-amended batches (0.56 mg-VSS/l) and diminished inversely with the increase of microbial concentration.     

Parameters for predicting fate of organochlorine pesticides in the environment (I) Octanol-water and air-water partition coefficients

Octanol-water partition coefficients and air-water partition coefficients of 10 principal organochlorine pesticides were obtained as basic data for predicting their fate in environment. The octanol-water partition coefficients were in the wide range from 10 to 10⁶ and approximately correlated with the solubilities in water. The air-water partition coefficients were also in the wide range from 10⁻⁷ to 10⁻², and the values for chloropicrin, dichlorvos, DCIP and quintozene were relatively high.     

Nonylphenols in freshwaters of the hydrologic system of an Italian district: association with human activities and evaluation of human exposure

A sampling campaign for the determination of concentrations of nonylphenol isomers (NPs) in freshwaters and sediments of the hydrologic system of the Rieti district (central Italy) was conducted from 2002 to 2003. Eighteen sampling points, selected on the basis of the different human activities in the vicinity, were monitored; six series of water samples (from June 2002 to February 2003) and one of sediment samples (summer 2002) were analyzed by GC/MS.

There was a direct relationship between concentrations of NPs and the presence of urban or industrial activities near the sampling point. However, concentrations of NPs in water were in the range of <0.1–1.4 μg l⁻¹, and their presence limited to short distances from the sources of contamination. Accumulation factors in sediment samples ranged from 10² to 5 × 10³.