苯和甲苯硝化及磺化反应热危险性分级研究

首先介绍了化工工艺热安全性的内涵,并从反应过程热危险性分析的方法学出发,介绍间隙、半间歇化学反应工艺热危险性分级研究的总体思路及方法。然后,围绕甲苯和苯的硝化、磺化反应,用全自动反应量热仪(RC1e)和加速度量热仪(ARC)测定其反应过程的绝热温升(△Tad)、目标反应所能达到的最高温度(TM)、分解反应最大速率到达时间(θD)等参数。运用风险评价指数矩阵法(方法1)和基于失控过程温度参数的热危险评估法(方法2)分别对其硝化和磺化反应过程的热危险性进行了分级评估。结果表明,这两种方法具有良好的一致性;给定工艺条件下甲苯和苯的一段硝化反应过程的热危险度等级较低;而磺化反应的热危险较高。尽管这两种方法还有一定的局限性,但对于间歇、半间歇合成工艺的本质安全化设计、工艺热危险性的评估具有重要的参考价值和实用意义。     

化学品反应危险性分级方法研究与应用

针对化学品反应危险性的评价,介绍利用最大分解热,反应放热功率,绝热反应参数等方法对化学品反应危险性进行分级的几种方法及各自特点。通过分析整合不同分级方法,提出一种基于实测反应放热参数的分级方法,此方法以初始放热温度和反应热组成指标体系,同时配合燃爆曲线实现对化学品反应危险性的分级,得到的结果对于化学品的安全评价有较强的参考价值。考察了6种有机过氧化物的放热性质,诠释了有机过氧化物的反应危险性,应用所提出的反应危险性分级方法对其进行分级,并对分级方法进行了验证。该方法结合了实验结果和多种分级方法的优点,使化学品反应危险性分级方法具有更强的实用性。     

Probe into effect of the initiator on the thermal runaway hazards of methyl methacrylate bulk polymerization

The bulk polymerization of methyl methacrylate (MMA) is of great importance in chemical industry, but the polymerization process is highly hazardous, and few reports have focused on the effect of initiators on its thermal hazards. In this work, to thoroughly explore the thermal hazard characteristics, the runaway behavior of MMA bulk polymerization is investigated by a combination of thermodynamics experimental and kinetics theoretical methods. The results indicate that the presence of initiator exhibits an undesirable thermal hazard to the MMA bulk polymerization, and its exothermic behavior is also greatly influenced by the type and concentration of initiator. For azobisisoheptanenitrile (ABVN), azodiisobutyronitrile (AIBN) and dibenzoyl peroxide (BPO) initiators as examples, the AIBN-initiated reaction has the shortest adiabatic induction period (39.51 min), whereas the BPO-initiated polymerization exhibits the strongest maximum temperature-rising rate and maximum pressure-rising rate. Under adiabatic runaway, the temperature and pressure change significantly with increasing AIBN concentration, revealing a great potential risk of thermal runaway. Kinetic parameters are calculated to further understand the thermal runaway mechanisms, showing a strong agreement with the adiabatic experimental data. Finally, based on the cooling failure scenario, severity grading is determined by the evaluation criteria. The current work provides extensive data as a reference and guidance for the process design and optimization of MMA bulk polymerization from the perspective of safety.     

Inherent thermal runaway hazard evaluation method of chemical process based on fire and explosion index

Thermal runaway hazard assessment provides the basis for comparing the hazard levels of different chemical processes. To make an overall evaluation, hazard of materials and reactions should be considered. However, most existing methods didn't take the both into account simultaneously, which may lead the assessment to a deviation from the actual hazard. Therefore, an integrated approach called Inherent Thermal-runaway Hazard Index (ITHI) was developed in this paper. Similar to Dow Fire and Explosion Index(F&EI) function, thermal runaway hazard of chemical process in ITHI was the product of material factor (MF) and risk index (RI) of reaction. MF was an indicator of material thermal hazards, which can be determined by initial reaction temperature and maximum power density. RI, which was the product of probability and severity, indicated the risk of thermal runaway during the reaction stage. Time to maximum rate under adiabatic conditions and criticality classes of scenario were used to indicate the runaway probability of the chemical process. Adiabatic temperature rise and heat of the desired reaction and secondary reaction were used to determine the severity of runaway reaction. Finally, predefined hazard classification criteria was used to classify and interpret the results obtained by this method. Moreover, the method was validated by case studies.     

自反应性化学物质热危险性综合评估

自反应性化学物质热危险性评估的关键在于表征参数的选择和量化,单一的评估参数往往仅表征其热危险性的某一方面。综合考虑自反应性物质发生热分解反应的难易程度及其造成后果的严重程度两个方面,分别选取放热反应初始温度(To)和反应热(-ΔH)作为相应的表征参数,通过半正态分布函数对这两个指标进行标准化处理。在此基础上根据风险的定义提出了一种新的自反应性化学物质的热危险性综合评估指数(THI指数),并建立相应的热危险性分级标准,对自反应性化学物质的热危险性进行综合评估与分级。结果表明,建立的THI指数所确定的热危险性分级结果与基于活化能和最大绝热温度的RHI指数的反应危险性等级基本一致,该指数能够对自反应性化学物质的热危险性进行定量评估。     

Pressure relief sizing of reactive system using DIERS simplified methods and dynamic simulation method

Incidents involving uncontrolled chemical reactions continue to result in fatality, injury and economic loss. These incidents are often the result of inadequate pressure relief system designs due to a limited knowledge of the chemical reactivity hazard. A safe process design requires knowledge of the chemical reactivity of desired as well as undesired chemical reactions due to upset conditions. Simplified, cost effective methods to relief system sizing are presented by The Design Institute of Emergency Relief Systems (DIERS). They require multiple experiments, and sizing is only valid for the system composition and thermal inertia represented by the small scale experiments. Results are often conservative, especially for gassy systems. Detailed, dynamic computer simulation is highly accurate and can be used for iterative design and multiple scenario evaluation.In this study, an accelerating rate calorimeter (ARC^®) and a low thermal inertia calorimeter (automatic pressure tracking adiabatic calorimeter – APTAC™) were used to collect chemical reactivity data for the dicumyl peroxide and toluene system. Results of the pressure relief system sizing using the dynamic simulation method are presented and compared with DIERS simplified methods.     

Hazard evaluation for chlorination and amination reactions of fluorocytosine production process

Reaction thermal runaway is one of the most important reasons leading to chemical accidents. With the rapid development of the chemical industry in the world, especially the fine chemical industry, various safety accidents also occur frequently. Therefore, it is necessary to study the exothermic behavior of the reaction process. In this study, reaction calorimeter was used to study the exothermic phenomena during the chlorination reaction and amination reaction. Differential scanning calorimetry was performed on the reactants, and thermogravimetric experiments were performed on the products. In addition, adiabatic experiment was performed to study the thermal runaway behavior of amination products under adiabatic conditions. The results showed that the target reactions generated a large amount of heat in the initial stage. The maximum temperature of amination reaction is higher than the initial decomposition temperature of the amination product under adiabatic condition. The pyrolysis of amination product was divided into three stages. The product had a high apparent activation energy at the beginning of decomposition, and the apparent activation energy decreased as the decomposition progressed.     

Evaluation of thermal properties and process hazard of three ionic liquids through thermodynamic calculations and equilibrium methods

Industrial and new energy applications of ionic liquids (ILs) may have to be used at high temperatures conditions, such as in batteries and fuel applications, which may cause thermal hazards. However, there are few studies on the thermal hazards of ILs. To ensure the thermal safety of ILs processes, three commonly used ILs were selected for analysis: 1-butyl-3-methylimidazolium nitrate ([Bmim]NO₃), 1-butyl-2,3-dimethylimidazolium nitrate ([Bmmim]NO₃), and 1,3-dimethylimidazolium nitrate ([Mmim]NO₃). The process hazards under adiabatic conditions demonstrated that [Bmmim]NO₃ and [Mmim]NO₃ have extensive explosion hazards. The self-reaction characteristics determined by the isothermal test indicated that the ILs are nth reactions, and the thermal decomposition features were also determined by thermogravimetric analysis. The data were obtained with a nonlinear thermodynamic model and used to establish the basic thermal hazards of the three ILs. In addition, based on the thermal equilibrium theory, the critical safety parameters can be inferred. The effects of heat transfer in 25.0 g and 50.0 g containers were discussed. The results show that [Mmim]NO₃ will produce a thermal runaway reaction at a lower temperature (<100 °C) and has the shortest reaction time (<1 day), which means [Mmim]NO₃ is considered to be the most hazardous material among the three ILs studied.     

Prediction of thermal hazards of chemical reactions

A large number of products of the chemical industry are produced using potentially hazardous reactions. The experimental investigation of the hazards of all reactions involved in production processes would be very expensive. The primary reactions—desired reactions which are part of the process—and the secondary reactions—undesired successive or side reactions—should both be considered. In this paper the methods of prediction of thermodynamic and kinetic properties of reactions are discussed.Thermodynamic data are of eminent practical importance because low heats of reaction may indicate that no further experimental investigations are necessary. For primary reactions, e.g. polymerization, diazotization and hydrogenation reactions, reaction enthalpies have been obtained by experimental methods. Typical data can be found in the public literature for the different reaction classes. When compared with theoretical thermodynamic data estimated by the chetah computer program, the agreement is satisfactory. chetah implements Benson's second-order group contribution technique (Benson, 1976).For secondary reactions, especially exothermic decomposition reactions, typical heats of reaction—mostly measured by DSC—have been associated with functional groups. Decompositions and other undesired exothermic reactions that proceed from the same functional group, e.g. a nitro group, have about the same heat of reaction.For the estimation using the chetah program, decomposition reactions have to be assumed which are typical for the functional group. The reaction yielding the maximum exothermic reaction energy was selected. The comparison of experimental heats of reaction with estimated data shows satisfactory agreement.In principle it is also possible to predict kinetic data of secondary reactions, but sufficient experimental data are missing.     

Numerical simulation of the thermal inertia of an adiabatic reaction calorimeter in reaction thermal safety process

Obtaining accurate thermal risk assessment parameters of chemical processes and substance properties is essential for improving the safety of chemical production and substance use and storage, and the adiabatic reaction calorimeter (ARC) has been employed by many researchers for this purpose. However, with the improvement and upgrading of the instrument, an examination of the factors that affect its detection accuracy is warranted. A simplified reaction model of the adiabatic thermal decomposition of tert-butyl peroxyacetate was constructed using computational fluid dynamics in which the adiabatic thermal decomposition kinetic model and fluid-solid coupling model were combined to simulate heat transfer. To verify the reliability of the parameters of the numerical calculation model, the effects of the sample cell's material, wall thickness, and mass were investigated in relation to the thermal inertia of the ARC. The results indicated that the thermal inertia of the system was lowest when the sample cell was composed of titanium. When the sample pool's composition is determined, the thermal inertia of the system can be reduced to a certain extent through an approximate increase in the sample mass. Finally, an analysis of the heat flow cloud diagram of the wall of sample pools made from different materials revealed that the thermal conductivity of titanium was high; this information can assist in controlling the adiabatic process.     

Reaction hazard and mechanism study of H2O2 oxidation of 2-butanol to methyl ethyl ketone using DSC,Phi-TEC II and GC-MS

Methyl ethyl ketone (MEK) oxidation via H₂O₂ with tungsten-based polyoxometalate catalysts has gained much attention with an ever-growing body of knowledge focusing on the development of environmentally benign processes in chemical industry. In this study, two calorimetry techniques, differential scanning calorimetry (DSC) and Phi-TEC II adiabatic calorimetry, were employed to analyze the thermal hazards associated with the 2-butanol oxidation reaction system. Hydrogen peroxide was the oxidant and a tungsten-based polyoxometalate as the catalyst. Gas chromatography-mass spectrometry was used for identification of the organic products. Important thermal kinetic data were obtained including “onset” temperature, heat of reaction, adiabatic temperature rise and self-heat rate. From DSC results, three exothermic peaks were detected with a total heat generation of approximately 1.26 kJ/g sufficiently to induce a thermal runaway. Possible reaction pathway for three stages were proposed based on both DSC and GC-MS results. One exotherm was detected by Phi-TEC II calorimeter and the pressure versus temperature profile together with the DSC and GC-MS data demonstrate the complexity of 2-butanol reaction system under both thermal screening and adiabatic conditions.     

化学品危险性鉴别分类研究的现状与展望

从对GHS(化学品分类及标记全球协调制度)化学品危险性鉴别分类的分析出发,归纳和总结了联合国、欧盟、美国以及中国的化学品危险性鉴别分类研究现状;提出化学品危险性鉴别分类是获取化学品安全信息、评估化学品的固有危险性的重要手段;给出化学品危险性鉴别分类试验必须满足OECD(经济合作与发展组织)的各项标准和准则;对化学品危险性鉴别分类的应用前景及未来工作进行评述和展望;指出为化学品安全管理、事故应急救援、事故调查及做好基础数据的积累是今后研究工作的努力方向;提出了借鉴GHS,REACH(化学品注册、评估、许可和限制)等先进化学品安全监管法规,对完善我国的化学品安全监管制度,化学品鉴别分类标准的重要现实意义。     

Azodicarboxylates: Explosive properties and DSC measurements

A large number of azodicarboxylates and their derivatives are produced and used in the chemical industries. The versatile applications of these azodicarboxylates in research institutes and in the chemical industries for chemical synthesis arouse additional hazards. The intent of this paper is to obtain first knowledge about the structure–response relationship regarding the explosive properties and the thermal hazards of different versatile used azodicarboxylates. The substances are examined with the differential scanning calorimetry (DSC). Furthermore, different laboratory test methods, based on the UN Recommendations on the Transport of Dangerous Goods, are applied to determine the explosive properties of the mentioned substances. On the basis of the obtained results, the known influence of the nitrogen content within the molecule regarding their thermal behaviour could be confirmed. The measured heat of decomposition appeared to be proportional to the nitrogen content within the group of the aliphatic and the aromatic azodicarboxylates. To emphasize this dependency, further investigations should be done. The long term objective of this research is to develop structure–response relationships of the explosive properties and the thermal hazards originating from azodicarboxylates.     

釜式反应器反应失控的温度与压力预测

釜式反应器因反应失控导致爆炸、火灾和有毒物料泄漏事故时有发生.对其反应失控内在规律的研究有助于采取针对性防范措施.本文从事故案例中分析和总结了化工生产中反应失控火灾爆炸事故的原因和事故特征.利用反应系统热量平衡原理和物料气-液相平衡原理,分别对间歇、半连续和连续式釜式反应器建立了反应失控所达到的最大温度和压力预测方法.结合釜式反应器的操作,应用此预测方法计算表明,半连续釜式反应器失控时继续加料,反应失控的绝热温升最大,连续和间歇釜式反应器次之,而半连续釜式反应器失控时停止加料绝热温升值较小;反应器内液体物料的蒸气压以比温升速度更大的速度上升.     

绿色技术评价磺化反应过程热危险性

反应量热仪RC1研究磺化反应过程中热危险性具有评价路线简单、易于操作、过程绿色环保等优势,近年来逐渐成为研究的热点.磺化反应过程中由于工艺的不同,不同磺化反应过程的热危险性也具有很大的差别.通过反应量热仪RC1、差示扫描量热DSC、绝热加速量热仪ARC对10种不同工艺的磺化反应过程的热危险进行了深入的研究,对企业实践生...     

Strategies for assessing and reducing inherent occupational health hazard and risk based on process information

Over the last few decades, the concept of inherent occupational health has gained increasing attention to reduce occupational hazards that may adversely impact workers’ health. In order to assess occupational hazards in the chemical process, different inherent occupational health assessment methods have been developed at the early stages of process development and design. The methods in the order of process information availability – ranging from the detailed piping and instrumentation diagrams to a simple sketch of process concepts are the: occupational health index (OHI), health quotient index (HQI) and inherent occupational health index (IOHI). This paper proposes systematic heuristic frameworks to assist process designers and engineers in assessing and reducing inherent occupational health hazards or risks based on process information availability. Strategies for reducing health hazards or risks in the OHI, HQI and IOHI methods based on inherently safer design (ISD) keywords of minimization, substitution, moderation and simplification are included in this study. It is worth mentioning that the proposed frameworks act as guidelines for design engineers in systematically selecting the appropriate index and methodology to assess and reduce health hazards/risks based on the availability of the process information. A case study is solved to illustrate the proposed framework.     

Diphenylmethane diisocyanate self-polymerization: Thermal hazard evaluation and proof of runaway reaction in gram scale

Thermal analysis by differential scanning calorimetry and thermogravimetric/differential thermal analysis mass spectrometry, adiabatic calorimetry, a gram-scale heating test, and infrared spectroscopy were performed to evaluate the thermal hazards of diphenylmethane diisocyanate (MDI) and prove the occurrence of a runaway reaction. The self-polymerization of MDI was found to occur at about 340 °C under rapid heating conditions. Carbon dioxide was eliminated and heat was generated to allow polymerization. Under adiabatic and closed conditions, the runaway reaction of MDI can begin at least from 220 °C. Besides it is highly probable that the runaway reaction of MDI can begin from a lower temperature in an actual process scale. More heat was generated than in the previous case and the pressure rose rapidly. A closed 2-mm-thick glass vessel exploded because of the runaway reaction of MDI even if the temperature was lower than 300 °C. Therefore, MDI could cause fatal runaway reactions below 300 °C, where MDI had been assumed to self-polymerize by eliminating carbon dioxide previously.     

Inclusion of pressure hazards into NFPA 704 instability rating system

The lack of awareness in identifying potential hazardous reactions is commonly cited as a cause of accidents. One major problem is the lack of consensus to assign appropriate reactivity hazards ratings. NFPA 704 instability rating system is widely used throughout the chemical industry. However, this system does not take into account pressure hazards. Inclusion of pressure hazards into the NFPA 704 instability rating will provide a more comprehensive rating system, which will characterize hazards that may arise not only from exothermic reactions, but also from endothermic decompositions with gas evolution. In this work we present a proposed method for developing a simple methodology to include pressure and pressure rates into the assignment of instability ratings. The current NFPA 704 instability rating number for the systems studied does not show a trend between the pressures and pressure rates generated with the assigned rating. Therefore, arbitrary threshold values were chosen to rank the substances according to the pressure and pressure rate generated. Results obtained from a variety of systems with endothermic decompositions show that their pressure and pressure rates have magnitudes comparable to systems that decompose exothermically. So far, this method has been applied only to a limited set of data. However, assignment of arbitrary values for normalized maximum pressures generated and pressure rates, taking as reference the values obtained for the thermal decomposition of cumene hydroperoxide and di-terbutyl peroxide appears to give reasonable limits for the rating chemicals based on their relative pressure hazards.