液/固体系中硅藻土对Pb2+和Cd2+的吸附机制

为了提高硅藻土在重金属废水处理上的应用水平,采用静态吸附实验考察了液/固体系中硅藻土对Pb2＋、Cd2＋的吸附影响因素、吸附等温线和吸附动力学属性。结果表明,随着投加量的减少,离子初始浓度的提高,pH值的增大,吸附作用时间的延长,硅藻土对Pb2＋、Cd2＋吸附量不断上升;硅藻土对Pb2＋、Cd2＋的等温吸附都符合Langmuir模型,硅藻土对Pb2＋、Cd2＋最大吸附量分别为10.428 mg/g和7.916 mg/g,硅藻土对Pb2＋具有更好的吸附能力;Pb2＋具有较低的水合自由能,更容易脱去水膜与硅藻土孔道内的活性基团发生吸附作用;双常数扩散方程可以很好地描述硅藻土对Pb2＋、Cd2＋的吸附动力学属性,硅藻土对Cd2＋有较快的吸附速率。     

改性花生壳对Cd(Ⅱ)和Pb(Ⅱ)的吸附机理

以前期制得改性块状花生壳为对象,测定改性花生壳等电点,考察离子强度对改性花生壳吸附Cd2+和Pb2+的影响、吸附前后吸附质溶液pH变化情况及蒸馏水、NaCl、HNO3、柠檬酸和EDTA 5种解吸液对Cd2+和Pb2+的解吸效果,并通过X-射线光电子能谱仪和傅里叶变换红外光谱仪对吸附前后的改性花生壳进行表征,推测并证实了改性花生壳对Cd2+和Pb2+可能的吸附机理。结果表明,改性花生壳对Cd2+和Pb2+可能的吸附机理是:Cd2+是通过外层络合、离子交换和内层络合的联合作用被吸附的;Pb2+主要是与改性花生壳上的O、N等活性基团发生内层络合;此外,改性花生壳表面生成的二氧化锰对Cd2+和Pb2+的吸附也起到一定的作用。     

Quantitative assessment of the toxic effects of heavy metals on 1,2-dichloroethane biodegradation in co-contaminated soil under aerobic condition

1,2-Dichloroethane (1,2-DCA) is one of the most hazardous pollutant of soil and groundwater, and is produced in excess of 5.44 × 10⁹ kg annually. Owing to their toxicity, persistence and potential for bioaccumulation, there is a growing interest in technologies for their removal. Heavy metals are known to be toxic to soil microorganisms at high concentrations and can hinder the biodegradation of organic contaminants. In this study, the inhibitory effect of heavy metals, namely; arsenic, cadmium, mercury and lead, on the aerobic biodegradation of 1,2-DCA by autochthonous microorganisms was evaluated in soil microcosm setting. The presence of heavy metals was observed to have a negative impact on the biodegradation of 1,2-DCA in both soil samples tested, with the toxic effect being more pronounced in loam soil, than in clay soil. Generally, 75 ppm As³⁺, 840 ppm Hg²⁺, and 420 ppm Pb²⁺ resulted in 34.24%, 40.64%, and 45.94% increase in the half live (t_½) of 1,2-DCA, respectively, in loam soil, while concentrations above 127.5 ppm Cd²⁺, 840 ppm Hg²⁺ and 420 ppm of Pb²⁺ and less than 75 ppm As³⁺ was required to cause a >10% increase in the t_½ of 1,2-DCA in clay soil. A dose-dependent relationship between degradation rate constant (k₁) of 1,2-DCA and metal ion concentrations was observed for all the heavy metals tested, except for Hg²⁺. This study demonstrated that different heavy metals have different impacts on the degree of 1,2-DCA degradation. Results also suggest that the degree of inhibition is metal specific and is also dependent on several factors including; soil type, pH, moisture content and available nutrients.     

巯基化改性膨润土对重金属的吸附性能

以钙基膨润土为基本材料,制备了巯基化改性膨润土,并对比研究了此材料与其他17种改性膨润土和原材料对重金属的吸附性能.结果表明,巯基化膨润土对镉的吸附能力显著优于其他材料,在本实验条件下,其对镉的吸附率高于其他材料30％以上,对镉的吸附量可达52.1 mg/g.巯基化膨润土对铅的吸附能力在重金属竞争吸附条件下优于其他材料,而其对镍的吸附能力在所有材料中处于中等水平;另外,巯基化膨润土对3种重金属的吸附受重金属竞争吸附影响较小.因此,在所研究的材料中,巯基化膨润土材料是一种最理想的重金属吸附材料.     

Removal of heavy metal ions from wastewater by a novel HEA/AMPS copolymer hydrogel: preparation, characterization, and mechanism

This study aims to synthesize 2-hydroxyethyl acrylate (HEA) and 2-acrylamido-2-methylpropane sulfonic (AMPS) acid-based hydrogels by gamma radiation and to investigate their swelling behavior and heavy metal ion adsorption capabilities. The copolymer hydrogels prepared were characterized via scanning electron microscopy, Fourier transformed infrared spectra, thermal gravimetric analysis, and X-ray photoelectron spectroscopy. The research showed that the copolymer hydrogel was beneficial for permeation due to its porous structure. In addition, the experimental group A-2-d [70 % water volume ratio and (n (AMPS)/n (HEA))?=?1:1] was an optimal adsorbent. The optimal pH was 6.0 and the optimal temperature was 15 °C. Pb²⁺, Cd²⁺, Cu²⁺, and Fe³+ achieved adsorption equilibriums within 24 h, whereas Cr³⁺ reached equilibrium in 5 h. Pb²+, Cd²⁺, Cr³⁺, and Fe³⁺ maximum load capacity was 1,000 mg L^?1, whereas the Cu²⁺ maximum capacity was 500 mg L^?1. The priority order in the multicomponent adsorption was Cr³⁺>Fe³⁺>Cu²⁺>Cd²⁺>Pb²⁺. The adsorption process of the HEA/AMPS copolymer hydrogel for the heavy metal ions was mainly due to chemisorption, and was only partly due to physisorption, according to the pseudo-second-order equation and Langmuir adsorption isotherm analyses. The HEA/AMPS copolymer hydrogel was confirmed to be an effective adsorbent for heavy metal ion adsorption.     

Migration of heavy metals and migration-degradation of phenanthrene in soil using electro kinetic-laccase combined remediation system

Abstract

In order to solve the problem of heavy metal-organic compound soil pollution, in this paper, we developed a highly efficient electro kinetic-laccase combined remediation (EKLCR) system. The results showed that the EKLCR system had an obvious migration effect on heavy metals (copper and cadmium) and good migration-degradation effect on phenanthrene. The migration rates of copper and cadmium were 48.3% and 40.3%, respectively. Especially, with the presence of laccase, the removal rate of phenanthrene on Cu²⁺-contaminated soil was higher than that of Cd²⁺-contaminated soil due to the significant effect of heavy metals on the enzymatic activity of laccase. The average migration-degradation rate of phenanthrene by EKLCR system was 45.4%. Finally, gas chromatography-mass spectrometry (GC/MS) was used to analyze the degradation intermediates of phenanthrene in the soil, which included 9,10-Phenanthrenequinone, phthalic acid, and 2,2-Biphenyldicarboxylic Acid. In addition, we give the possible degradation pathways of phenanthrene, 2,2-Biphenyldicarboxylic Acid is further degraded to produce phthalic acid. The products of the phthalic acid metabolic pathway are protocatechuic acid, pyruvic acid or succinic acid, the final products of these organic acids are carbon dioxide and water.     

Silver-modified clinoptilolite for the removal of Escherichia coli and heavy metals from aqueous solutions

This paper investigates the potential of using the silver antibacterial properties combined with the metal ion exchange characteristics of silver-modified clinoptilolite to produce a treatment system capable of removing both contaminants from aqueous streams. The results have shown that silver-modified clinoptilolite is capable of completely eliminating Escherichia coli after 30-min contact time demonstrating its effectiveness as a disinfectant. Systems containing both E. coli and metals exhibited 100 % E. coli reduction after 15-min contact time and maximum metal adsorption removal efficiencies of 97, 98, and 99 % for Pb²⁺, Cd²⁺, and Zn²⁺ respectively after 60 min; 0.182–0.266 mg/g of metal ions were adsorbed by the zeolites in the single- and mixed-metal-containing solutions. Nonmodified clinoptilolite showed no antibacterial properties. This study demonstrated that silver-modified clinoptilolite exhibited high disinfection and heavy metal removal efficiencies and consequently could provide an effective combined treatment system for the removal of E. coli and metals from contaminated water streams.     

Competitive biosorption of lead, cadmium, copper, and arsenic ions using algae

The present study aims to evaluate the competitive biosorption of lead, cadmium, copper, and arsenic ions by using native algae. A series of experiments were carried out in a batch reactor to obtain equilibrium data for adsorption of single, binary, ternary, and quaternary metal solutions. The biosorption of these metals is based on ion exchange mechanism accompanied by the release of light metals such as calcium, magnesium, and sodium. Experimental parameters such as pH, initial metal concentrations, and temperature were studied. The optimum pH found for removal were 5 for Cd²⁺ and As³⁺ and 3 and 4 for Pb²⁺ and Cu²⁺, respectively. Fourier transformation infrared spectroscopy analysis was used to find the effects of functional groups of algae in biosorption process. The results showed that Pb²⁺ made a greater change in the functional groups of algal biomass due to high affinity to this metal. An ion exchange model was found suitable for describing the biosorption process. The affinity constants sequence calculated for single system was K _Pb > K _Cu > K _Cd > K _As; these values reduced in binary, ternary, and quaternary systems. In addition, the experimental data showed that the biosorption of the four metals fitted well the pseudo-second-order kinetics model.     

Evaluation of three common alkaline agents for immobilization of multi-metals in a field-contaminated acidic soil

We investigated three common alkaline agents (NaOH, CaO, and Mg(OH)₂) for immobilization of four heavy metals (Pb, Zn, Cu, and Cd) in a field-contaminated soil and elucidated the underpinning principles. NaOH caused the highest pH spike in the soil, while CaO and Mg(OH)₂ served as a longer-lasting source of OH^-. Amending the soil with CaO or Mg(OH)₂ at ≥0.1 mol as OH^- (kg·soil)^?1 for 24 h was able to immobilize all four metals, while NaOH failed. NaOH leached up to 3 times more organic carbon than CaO and Mg(OH)₂, resulting in elevated leachability of the metals. Column elution tests showed that amendments by CaO and Mg(OH)₂ lowered the leachable Pb²⁺, Zn²⁺, Cu²⁺, and Cd²⁺ by 52–54%, 71–75%, 69–73%, and 68%, respectively, after 1440 pore volumes of elution. Sequential extraction revealed that the soil amendments converted the exchangeable fraction of the metals to the much less available forms. XRD and FTIR analyses indicated that formation of metal oxide precipitates and complexation with soil organic matter were responsible for the metals immobilization. Taken together the chemical cost, technical effectiveness, and environmental impact, CaO is the most suitable alkaline agent for remediation of soil contaminated with heavy metals.

     

Copper and cadmium effects on growth and extracellular exudation of the marine toxic dinoflagellate Alexandrium catenella: 3D-fluorescence spectroscopy approach

In this study, metal contamination experiments were conducted to investigate the effects of copper and cadmium on the growth of the marine toxic dinoflagellate Alexandrium catenella and on the production of dissolved organic matter (Dissolved Organic Carbon: DOC; Fluorescent Dissolved Organic Matter: FDOM). This species was exposed to increasing concentrations of Cu²⁺ (9.93 × 10⁻¹⁰–1.00 × 10⁻⁷ M) or Cd²⁺ (1.30 × 10⁻⁸–4.38 × 10⁻⁷ M), to simulate polluted environments. The drastic effects were observed at pCu²⁺ = 7.96 (Cu²⁺: 1.08 × 10⁻⁸ M) and pCd²⁺ = 7.28 (Cd²⁺: 5.19 × 10⁻⁸ M), where cyst formation occurred. Lower levels of Cu²⁺ (pCu²⁺ > 9.00) and Cd²⁺ (pCd²⁺ > 7.28) had no effect on growth. However, when levels of Cu²⁺ and Cd²⁺ were beyond 10⁻⁷ M, the growth was totally inhibited. The DOC released per cell (DOC/Cell) was different depending on the exposure time and the metal contamination, with higher DOC/Cell values in response to Cu²⁺ and Cd²⁺, comparatively to the control. Samples were also analyzed by 3D-fluorescence spectroscopy, using the Parallel Factor Analysis (PARAFAC) algorithm to characterize the FDOM. The PARAFAC analytical treatment revealed four components (C1, C2, C3 and C4) that could be associated with two contributions: one, related to the biological activity; the other, linked to the decomposition of organic matter. The C1 component combined a tryptophan peak and a characteristic humic substances response, and the C2 component was considered as a tryptophan protein fluorophore. The C3 and C4 components were associated to marine organic matter production.     

Biosorption of divalent Pb, Cd and Zn on aragonite and calcite mollusk shells

The potential of using mollusk shell powder in aragonite (razor clam shells, RCS) and calcite phase (oyster shells, OS) to remove Pb²⁺, Cd²⁺ and Zn²⁺ from contaminated water was investigated. Both biogenic sorbents displayed very high sorption capacities for the three metals except for Cd on OS. XRD, SEM and XPS results demonstrated that surface precipitation leading to crystal growth took place during sorption. Calcite OS displayed a remarkably higher sorption capacity to Pb than aragonite RCS, while the opposite was observed for Cd. However, both sorbents displayed similar sorption capacities to Zn. These could be due to the different extent of matching in crystal lattice between the metal bearing precipitate and the substrates. The initial pH of the solution, sorbent’s dosage and grain size affected the removal efficiency of the heavy meals significantly, while the organic matter in mollusk shells affected the removal efficiency to a lesser extent.     

Preparation of calcium oxalate—bromopyrogallol red inclusion sorbent and application to treatment of cationic dye and heavy metal wastewaters

Background, aim, and scope  Dye pollutants are a major class of environmental contaminants. Over 100,000 dyes have been synthesized worldwide and more than 700,000 tons are produced annually and over 5% are discharged into aquatic environments. The adsorption or sorption is one of the most efficient methods to remove dye and heavy metal pollutants from wastewater. However, most of the present sorbents often bear some disadvantages, e.g. low sorption capacity, difficult separation of spoil, complex reproduction, or secondary pollution. Development of novel sorbents that can overcome these limitations is desirable. Materials and methods  On the basis of the chemical coprecipitation of calcium oxalate (CaC₂O₄), bromopyrogallol red (BPR) was embedded during the growing of CaC₂O₄ particles. The ternary C₂O₄ ^2––BPR–Ca²⁺ sorbent was yielded by the centrifugation. Its composition was determined by spectrophotometry and AAS, and its structure and morphology were characterized by powder X-ray diffraction (XRD), laser particle-size analysis, and scanning electron microscopy (SEM). The adsorption of ethyl violet (EV) and heavy metals, e.g. Cu(II), Cd(II), Ni(II), Zn(II), and Pb(II) were carried out and their removal rate determined by spectrophotometry and ICP-OES. The adsorption performance of the sorbent was compared with powder activated carbon. The Langmuir isothermal model was applied to fit the embedment of BPR and adsorption of EV. Results  The saturation number of BPR binding to CaC₂O₄ reached 0.0105 mol/mol and the adsorption constant of the complex was 4.70 × 10⁵ M^–1. Over 80% of the sorbent particles are between 0.7 and 1.02 μm, formed by the aggregation of the global CaC₂O₄/BPR inclusion grains of 30–50 nm size. Such a material was found to adsorb cationic dyes selectively and sensitively. Ethyl violet (EV) was used to investigate the adsorption mechanism of the material. One BPR molecule may just bind with one EV molecule. The CaC₂O₄/BPR inclusion material adsorbed EV over two times more efficiently than the activated carbon. The adsorption of EV on the CaC₂O₄/BPR inclusion sorbent was complete in only 5 min and the sedimentation complete in 1 h. However, those of EV onto activated carbon took more than 1.5 and 5 h, respectively. The treatment of methylene blue and malachite green dye wastewaters indicated that only 0.4% of the sorbent adsorbed over 80% of color substances. Besides, the material can also adsorb heavy metals by complexation with BPR. Over 90% of Pb²⁺, and approximately 50% of Cd²⁺ and Cu²⁺, were removed in a high Zn²⁺-electroplating wastewater when 3% of the material was added. Eighty-six percent of Cu²⁺, and 60% of Ni²⁺ and Cd²⁺, were removed in a high Cd²⁺-electroplating wastewater. Discussion  The embedment of BPR into CaC₂O₄ particles responded to the Langmuir isothermal adsorption. As the affinity ligand of Ca²⁺, BPR with sulfonic groups may be adsorbed into the temporary electric double layer during the growing of CaC₂O₄ particles. Immediately, C₂O₄ ^2– captured the Ca²⁺ to form the CaC₂O₄ outer enclosed sphere. Thus, BPR may be released and embedded as a sandwich between CaC₂O₄ layers. The adsorption of EV on the sorbent obeyed the Langmuir isothermal equation and adsorption is mainly due to the ion-pair attraction between EV and BPR. Different from the inclusion sorbent, the activated carbon depended on the specific surface area to adsorb organic substances. Therefore, the adsorption capacity, equilibrium, and sedimentation time of the sorbent are much better than activated carbon. The interaction of heavy metals with the inclusion sorbent responded to their coordination. Conclusions  By characterizing the C₂O₄ ^2––BPR–Ca²⁺ inclusion material using various modern instruments, the ternary in situ embedment particle, [(CaC₂O₄)₉₅(BPR)] _n ^2n–, an electronegative, micron-sized adsorbent was synthesized. It is selective, rapid, and highly effective for adsorbing cationic dyes and heavy metals. Moreover, the adsorption is hardly subject to the impact of electrolytes. Recommendations and perspectives  The present work provides a simple and valuable method for preparing the highly effective adsorbent. If a concentrated BPR wastewater was reused as the inclusion reactant, the sorbent will be low cost. By selecting the inclusion ligand with a special structure, we may prepare some particular functional materials to recover the valuable substances from seriously polluted wastewaters. The recommended method will play a significant role in development of advanced adsorption materials. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Hexavalent chromium reduction and plant growth promotion by Staphylococcusarlettae strain Cr11

Cr(VI), a mutagenic and carcinogenic pollutant in industrial effluents, was effectively reduced by an indigenous tannery effluent isolate Staphylococcus arlettae strain Cr11 under aerobic conditions. The isolate could tolerate Cr(VI) up to 2000 and 5000 mg L⁻¹ in liquid and solid media respectively. S. arlettae Cr11 effectively reduced 98% of 100 mg L⁻¹ Cr(VI) in 24 h. Reduction for initial Cr(VI) concentrations of 500 and 1000 mg L⁻¹ was 98% and 75%, respectively in 120 h. The isolate was also positive for siderophore, indole acetic acid, ammonia and catalase production, phosphate solubilization and biofilm formation in the presence and absence of Cr(VI). The isolate showed halotolerance (10% NaCl) and cross tolerance to other toxic heavy metals such as Hg²⁺, Ni²⁺, Cd²⁺ and Pb²⁺. Bacterial inoculation of Triticum aestivum in controlled petri dish and soil environment showed significant increase in percent germination, root and shoot length as well as dry and wet weight in Cr(VI) treated and untreated samples. This is the first report of simultaneous Cr(VI) reduction and plant growth promotion for a S. arlettae strain.     

Enhanced 1,2-dichloroethane degradation in heavy metal co-contaminated wastewater undergoing biostimulation and bioaugmentation

Biostimulation, bioaugmentation and dual-bioaugmentation strategies were investigated in this study for efficient bioremediation of water co-contaminated with 1,2-dichloroethane (1,2-DCA) and heavy metals, in a microcosm set-up. 1,2-DCA concentration was periodically measured in the microcosms by gas chromatographic analysis of the headspace samples, while bacterial population and diversity were determined by standard plate count technique and Polymerase chain reaction and denaturing gradient gel electrophoresis (PCR–DGGE) analysis, respectively. Dual-bioaugmentation, proved to be most effective exhibiting 22.43%, 26.54%, 19.58% and 30.49% increase in 1,2-DCA degradation in microcosms co-contaminated with As³⁺, Cd²⁺, Hg²⁺ and Pb²⁺, respectively, followed by bioaugmentation and biostimulation. Dual-bioaugmented microcosms also exhibited the highest increase in the biodegradation rate constant (k₁) resulting in 1.76-, 2-, 1.7- and 2.1-fold increase in As³⁺, Cd²⁺, Hg²⁺ and Pb²⁺ co-contaminated microcosms respectively, compared to the untreated microcosms. Dominant bacterial strains obtained from the co-contaminated microcosms were found to belong to the genera Burkholderia, Pseudomonas, Bacillus, Enterobacter and Bradyrhizobium, previously reported for 1,2-DCA and other chlorinated compounds degradation. PCR–DGGE analysis revealed variation in microbial diversity over time in the different co-contaminated microcosms. Results obtained in this study have significant implications for developing innovative bioremediation strategies for treating water co-contaminated with chlorinated organics and heavy metals.     

三乙二醇二甲基丙烯酸酯为交联剂制备的高吸水树脂对重金属的吸附

以前期工作中合成的树脂PAANa-TE为吸附剂进行重金属吸附测试,考察吸附剂用量、丙烯酸中和度、吸附时间、溶液pH、初始浓度和吸附温度对树脂吸附重金属离子Cu2+、Pb2+、Cr3+和Co2+性能的影响,用原子吸收分光光度计测定了树脂吸附Cu2+、Pb2+、Cr3+和Co2+后的残留浓度,树脂对4种金属离子的吸附容量分别为21.59、2.39、5.66和4.98 mmol/g,吸附容量大小为Cu2+Cr3+Co2+Pb2+,吸附速率顺序为Cr3+Pb2+Cu2+Co2+。结果表明,该树脂对高浓度重金属离子有较快速,高效率的吸附,吸附过程在100 min左右吸附容量达到最大,并用不同浓度的酸对吸附重金属离子的树脂进行脱附处理,脱附量很小,据此可考虑进一步对金属离子进行回收处理。且脱附率较低,因此,可对工业化和城市化进程所产生的各种化学形态的重金属水体污染物造成的生态环境和质量问题起到重要的改善作用。     

Characterization of bacterial communities at heavy-metal-contaminated sites

The microbial community in soil samples from two long-term contaminated sites was characterized by using culture-dependent and culture-independent methods. The two sites investigated contained high amounts of heavy metals and were located in the upper Silesia Industrial Region in southern Poland. The evaluation of the aerobic soil microbial population clearly demonstrated the presence of considerable numbers of viable, culturable bacteria at both sites. A high fraction of the bacterial population was able to grow in the presence of high amounts of metals, i.e. up to 10 mM Zn²⁺, 3 mM Pb²⁺ or 1 mM Cu²⁺. Site 1 contained significantly (P < 0.05) lower bacterial numbers growing in the presence of 10 mM Zn²⁺ than site 2, while the opposite was observed for bacteria tolerating 1 mM Cu²⁺. This coincided with the contents of these two metals at the two sites. Ecophysiological (EP) indices for copiotrophs (r-strategists) and oligotrophs (K-strategists) pointed to high bacterial diversity at both sites. Fluorescence in situ hybridization (FISH) analysis indicated that Actinobacteria and Proteobacteria represent the physiologically active fraction of bacteria at the two sites. Shannon diversity (H′) indices for FISH-detected bacterial phylogenetic groups were not significantly different at the two sites.     

复合纳米材料对土壤重金属离子吸持固化的模拟研究

土壤中过量重金属离子可通过食物链和地表水系统危害人群健康。通过土柱淋溶模拟实验,研究了SiO2-Al2O3-Fe2O3等复合纳米材料对土壤溶液中Cu2+、Cd2+、Pb2+、Zn2+和Ni2+的吸持与固化特征。分别向重金属含量4倍于土壤二级标准(GB15618-1995)的土壤中添加0%、4%、6%和10%的复合纳米材料,分析不同深度土壤渗滤液以及土柱上栽培植物不同部位中重金属的含量。结果表明,碱性壤质土壤中重金属向下的迁移量很少;在含4%复合纳米材料土柱中,其吸持固化土壤溶液中63%的Cu、79%的Cd、68%的Pb、89%的Zn和76%的Ni;在含6%复合纳米材料土柱中,其吸持固化土壤溶液中82%的Cu、92%的Cd、76%的Pb、91%的Zn和88%的Ni;再增加土柱中复合纳米材料的含量,其吸持固化效果并不再显著增加。     

胺基树脂的合成及对水中重金属离子的吸附特征

研究了使用氯甲基化聚苯乙烯交联微球为前驱体与二乙烯三胺经回流反应合成胺基树脂及其对水中Cd2+和Ni2+的吸附特征。结果表明,胺基官能团成功地嫁接到树脂表面,胺基含量为5.6 mmol/g。胺基树脂对Cd2+和Ni2+的吸附等温线表明,温度的升高有利于吸附,且吸附等温线都符合Langmuir模型。pH值对吸附的影响较大,最佳吸附pH值范围为4~6。2种金属离子在胺基树脂上的吸附都符合准二级动力学方程。     

Cadmium (Cd2+) removal by nano zerovalent iron: surface analysis, effects of solution chemistry and surface complexation modeling

Nano zerovalent iron (nZVI) is an effective remediant for removing various organic and inorganic pollutants from contaminated water sources. Batch experiments were conducted to characterize the nZVI surface and to investigate the effects of various solution properties such as pH, initial cadmium concentration, sorbent dosage, ionic strength, and competitive ions on cadmium removal by nZVI. Energy-dispersive X-ray and X-ray photoelectron spectroscopy results confirmed removal of Cd²⁺ ions by nZVI through adsorption. Cd²⁺ adsorption decreased in the presence of competitive cations in the order: Zn²⁺?>?Co²⁺?>?Mg²⁺?>?Mn²⁺?=?Cu²⁺?>?Ca²⁺?>?Na²⁺?=?K⁺. Higher concentrations of Cl^? significantly decreased the adsorption. Cadmium removal increased with solution pH and reached a maximum at pH 8.0. The effects of various solution properties indicated Cd²⁺ adsorption on nZVI to be a chemisorption (inner-sphere complexation) process. The three surface complexation models (diffuse layer model, constant capacitance model, and triple layer model) fitted well to the adsorption edge experimental data indicating the formation of nZVI–Cd bidentate inner-sphere surface complexes. Our results suggest that nZVI can be effectively used for the removal of cadmium from contaminated water sources with varying chemical conditions.     

Effect of Ca2+-ions on the absorption of Pb2+, Cu2+, Cd2+ and Zn2+ by humic substances

Distribution coefficients for the sorption of Pb²⁺, Cu²⁺, Cd²⁺ and Zn²⁺ by peat were determined as a function of the Ca²⁺-content of peat as well as of the Ca²⁺-concentration in the solution. The amount of heavy metal ions taken up was measured for Cu²⁺, Cd²⁺ and Zn²⁺ by atomic absorption spectrometry and for Pb²⁺ by using Pb-212 as a radioactive tracer.The results show that the distribution coefficients of the heavy metal ions increase, if one increases the initial ratio of the $\text{Ca}{}^{\mathrm{2+}}\text{H}{}^{\mathrm{+}}\text{-}\text{ions}$ in the peat phase. The distribution coefficients for the heavy metal ions decrease, however, if - at constant initial Ca²⁺-content of the peat - the Ca²⁺-concentration of the solution is increased.