The roles of garment design and scene complexity in the daytime conspicuity of high-visibility safety apparel

INTRODUCTION: This study examines the effects of high-visibility garment design on daytime pedestrian conspicuity in work zones. Factors assessed were garment color, amount of background material, pedestrian arm motion, scene complexity, and driver age. METHOD: The study was conducted in naturalistic conditions on public roads in real traffic. Drivers drove two passes on a 31-km route and indicated when they detected pedestrians outfitted in the fluorescent garments. The locations of the vehicle and the pedestrian were recorded. RESULTS: Detection distances between fluorescent yellow-green and fluorescent red-orange garments were not significantly different, nor were there any significant two-way interactions involving garment color. Pedestrians were detected at longer distances in lower complexity scenes. Arm motion significantly increased detection distances for pedestrians wearing a Class 2 vest, but had little added benefit on detection distances for pedestrians wearing a Class 2 jacket. DISCUSSION: Daytime detection distances for pedestrians wearing Class 2 or Class 3 garments are longest when the complexity of the surround is low. The more background information a driver has to search through, the longer it is likely to take the driver to locate a pedestrian--even when wearing a high-visibility garment. IMPACT ON INDUSTRY: These findings will provide information to safety garment manufacturers about characteristics of high-visibility safety garments which make them effective for daytime use.     

Drivers' judgments of the effect of headlight glare on their ability to see pedestrians at night

IntroductionSeveral studies have concluded that pedestrians typically overestimate their own conspicuity to approaching drivers at night. The present experiments extended this research by exploring the accuracy of drivers' judgments of pedestrian conspicuity while facing varying degrees of headlight glare.MethodIn Experiment 1, participants on an open road estimated their ability to see a roadside pedestrian in each of two clothing configurations and with each of three different glare intensities present. In Experiment 2, participants responded to a roadside pedestrian under the same open road conditions; the participants were naïve with regard to both the position of the pedestrian and to the clothing and glare manipulations.ResultsConsistent with earlier research, estimates of response distance were, on the average, over three times greater than actual recognition distance. The extent to which participants overestimated conspicuity was greater when the pedestrian wore a retroreflective vest, and participants incorrectly judged that headlight glare would not degrade drivers' ability to see a pedestrian wearing a retroreflective vest.Conclusions and Practical ApplicationsThese results confirm that road users' understanding of issues involving drivers' night vision is limited. These misunderstandings may result in road users behaving in ways that increase the risk of nighttime collisions with pedestrians.     

High visibility safety apparel and nighttime conspicuity of pedestrians in work zones

PROBLEM: Every year numerous occupational fatalities result from pedestrians being struck by motor vehicles intruding into work zones. METHOD: Attributes of retroreflective personal safety garments on pedestrian conspicuity at night were assessed in a field study. Using instrumented vehicles on a closed track, participants drove through simulated work zones attempting to detect pedestrians located in the work zones. RESULTS: Configuration of the retroreflective trim, trim color, placement in the work zone, and driver age significantly affected pedestrian conspicuity. Intensity and the amount of retroreflective trim did not. DISCUSSION: Personal safety garments incorporating retroreflective trim significantly improve pedestrian conspicuity in work zones. SUMMARY: The results emphasize the importance of retroreflective trim on personal safety garments, particularly if the trim is located on garment sleeves. IMPACT ON INDUSTRY: We examine the design attributes that contribute to making a personal safety garment conspicuous. The results have implications regarding preferred garment designs, industry standards, and service life of personal safety garments.     

Using retro-reflective cloth to enhance drivers’ judgment of pedestrian walking direction at night-time

Purpose: Fatal pedestrian collisions are over-represented at night and poor conspicuity is believed to be a leading causative factor. Retro-reflective clothing enhances pedestrian conspicuity, particularly when placed in a biological motion or “biomotion” configuration. In this study, we explored how various retro-reflective clothing configurations affected the ability to judge the direction of a pedestrian walking across the road, which has important implications for collision avoidance. Methods: Participants included 21 young drivers (mean age 21.6 ± 2.0 years) with normal vision. A closed-road circuit was used to assess the accuracy of drivers’ judgement of the direction of walking of a pedestrian at night-time wearing one of five different clothing configurations: four with retro-reflective materials placed in different locations (Biomotion, Legs + Torso, Torso Only, Legs Only), and a control wearing only black clothing (Street). Participants were seated in a stationary vehicle with low beam headlamps, 135 m from a pedestrian, who walked across the road from both sides, in different directions (towards the car, straight across the road, or away from the car). Outcome measures included drivers’ response accuracy and confidence ratings for judging pedestrian walking direction. Results: Accuracy in judging pedestrian walking direction differed significantly across the clothing configurations (p < 0.001). Response accuracy was significantly higher for the Biomotion configuration (80% correct), compared to the other retro-reflective (Legs + Torso 64%; Torso Only 53%; Legs Only 50%) and Street configurations (33%). Similar trends were noted for confidence ratings across the clothing conditions, yet the relationship between confidence ratings and response accuracy within each clothing configurations was poor. Conclusions: The use of retro-reflective clothing in a biomotion configuration facilitated the highest accuracy and confidence in drivers’ judgment of pedestrian walking direction, compared to other configurations. These findings highlight the importance of using biomotion clothing for pedestrians at night, to not only facilitate drivers’ earlier recognition of pedestrians, but also increase their accuracy in determining the walking direction of pedestrians as they cross the road. Practical applications: The use of clothing incorporating retro-reflective material in a biomotion configuration for pedestrians crossing roads at night provides enhanced cues for drivers regarding the presence and walking direction of pedestrians.     

Sight obstruction at at-grade pedestrian crossings: A review of the understanding of the meaning of zigzag lines

Parked and stopped vehicles in the vicinity of an at-grade pedestrian crossing obstruct visibility between pedestrians crossing the roadway and approaching vehicles, leading into vehicle–pedestrian crashes. Pavement zigzag line markings at at-grade pedestrian crossings, mostly at mid-block locations are used to restrict parking, stopping, and overtaking within the crossing, to enhance driver–pedestrian visibility. Yet, in some countries zigzag lines are used as advance markings to the crossing. Like any other traffic control device, zigzag lines’ effectiveness hinges on road user’s understanding of their meanings.This paper reviews the literature on the applications and understanding of these lines at pedestrian crossings. The meaning of zigzag line pavement markings at pedestrian crossings has not been well understood to some road users and road safety stakeholders worldwide. This dilemma may suggest that educating road users, especially drivers, may be necessary in order to improve pedestrian safety. Documented literature such as this one may also improve the understanding of these lines to road safety stakeholders. Despite of the importance of unobstructed sight between the pedestrian and the driver, treatments in the forms of signs and pavement markings require continuous education and enforcement. Practicing traffic engineers may want to place more emphasis on engineering treatments that are more effective in improving pedestrian safety, such as those that manages vehicle speeds, than relying heavily on traffic control devices that are often misunderstood and lesser effective such as zigzag lines.     

Evaluation of driver performance with a prototype cyber physical mid-block crossing advanced warning system

Introduction: Using connected vehicle technologies, pedestrian to vehicle (P2V) communication applications can be installed on smart devices allowing pedestrians to communicate with drivers by broadcasting discrete safety messages, received by drivers in-vehicle, as an alternative to expensive fixed-location physical safety infrastructure. Method: This study consists of designing, developing, and deploying an entirely cyber-physical P2V communication system within the cellular vehicle to everything (C-V2X) environment at a mid-block crosswalk to analyze drivers’ reactions to in-vehicle advanced warning messages, the impacts of the advanced warning messages on driver awareness, and drivers’ acceptance of this technology. Results: In testing human subjects with, and without, advanced warning messages upon approaching a mid-block crosswalk, driver reaction, acceptance, speed, eye tracking data, and demographic data were collected. Through an odds ratio comparison, it was found that drivers were at least 2.44 times more likely to stop for the pedestrian with the warning than without during the day, and at least 1.79 times more likely during the night. Furthermore, through binary logistic regression analysis, it was found that driver age, time of the day, and the presence of the advanced warning message all had strong, significant impacts with a confidence value of at least 98% (p < 0.02) on the rate at which drivers stopped for the pedestrian. Conclusions: The results from this study indicate that the advanced warning message sent within the C-V2X had a strong, positive impact on driver behavior and understanding of pedestrian intent. Practical Applications: Pedestrian crashes and fatality rates at mid-block crossings continue to increase over the years. Connected vehicle technology utilizing smart devices can be used as a means for communications between pedestrians and drivers to deliver safety messages. State and local city planners should consider geofencing designated mid-block crossings at which this technology operates to increase pedestrian safety and driver awareness.     

Investigating the risk factors associated with pedestrian injury severity in Illinois

IntroductionPedestrians are known as the most vulnerable road users, which means their needs and safety require specific attention in strategic plans. Given the fact that pedestrians are more prone to higher injury severity levels compared to other road users, this study aims to investigate the risk factors associated with various levels of injury severity that pedestrians experience in Illinois.MethodOrdered-response models are used to analyze single-vehicle, single-pedestrian crash data from 2010 to 2013 in Illinois. As a measure of net change in the effect of significant variables, average direct pseudo-elasticities are calculated that can be further used to prioritize safety countermeasures. A model comparison using AIC and BIC is also provided to compare the performance of the studied ordered-response models.ResultsThe results recognized many variables associated with severe injuries: older pedestrians (more than 65 years old), pedestrians not wearing contrasting clothing, adult drivers (16–24), drunk drivers, time of day (20:00 to 05:00), divided highways, multilane highways, darkness, and heavy vehicles. On the other hand, crossing the street at crosswalks, older drivers (more than 65 years old), urban areas, and presence of traffic control devices (signal and sign) are associated with decreased probability of severe injuries.Conclusions and practical applicationsThe comparison between three proposed ordered-response models shows that the partial proportional odds (PPO) model outperforms the conventional ordered (proportional odds—PO) model and generalized ordered logit model (GOLM). Based on the findings, stricter rules to address DUI driving is suggested. Educational programs need to focus on older pedestrians given the increasing number of older people in Illinois in the upcoming years. Pedestrians should be educated to use pedestrian crosswalks and contrasting clothing at night. In terms of engineering countermeasures, installation of crosswalks where pedestrian activity is high seems a promising practice.     

Creating Pedestrian Crash Scenarios in a Driving Simulator Environment

Objective: In 2012 in the United States, pedestrian injuries accounted for 3.3% of all traffic injuries but, disproportionately, pedestrian fatalities accounted for roughly 14% of traffic-related deaths (NHTSA 2014 NHTSA. Traffic Safety Facts 2012 Pedestrians. Washington, DC: Author; 2014. DOT HS 811 888. [Google Scholar]). In many other countries, pedestrians make up more than 50% of those injured and killed in crashes. This research project examined driver response to crash-imminent situations involving pedestrians in a high-fidelity, full-motion driving simulator. This article presents a scenario development method and discusses experimental design and control issues in conducting pedestrian crash research in a simulation environment. Driving simulators offer a safe environment in which to test driver response and offer the advantage of having virtual pedestrian models that move realistically, unlike test track studies, which by nature must use pedestrian dummies on some moving track.

Methods: An analysis of pedestrian crash trajectories, speeds, roadside features, and pedestrian behavior was used to create 18 unique crash scenarios representative of the most frequent and most costly crash types. For the study reported here, we only considered scenarios where the car is traveling straight because these represent the majority of fatalities. We manipulated driver expectation of a pedestrian both by presenting intersection and mid-block crossing as well as by using features in the scene to direct the driver's visual attention toward or away from the crossing pedestrian. Three visual environments for the scenarios were used to provide a variety of roadside environments and speed: a 20–30 mph residential area, a 55 mph rural undivided highway, and a 40 mph urban area.

Results: Many variables of crash situations were considered in selecting and developing the scenarios, including vehicle and pedestrian movements; roadway and roadside features; environmental conditions; and characteristics of the pedestrian, driver, and vehicle. The driving simulator scenarios were subjected to iterative testing to adjust time to arrival triggers for the pedestrian actions. This article discusses the rationale behind creating the simulator scenarios and some of the procedural considerations for conducting this type of research.

Conclusions: Crash analyses can be used to construct test scenarios for driver behavior evaluations using driving simulators. By considering trajectories, roadway, and environmental conditions of real-world crashes, representative virtual scenarios can serve as safe test beds for advanced driver assistance systems. The results of such research can be used to inform pedestrian crash avoidance/mitigation systems by identifying driver error, driver response time, and driver response choice (i.e., steering vs. braking).     

Personal exposure risk factors in pedestrian accidents in Bahrain

Pedestrians are involved in traffic accidents due to many reasons. It is generally thought that personal background of pedestrians has an effect on their involvement rate in the road traffic accidents. Identifying these characteristics would lead to a better understanding of pedestrian accident pattern so that the resources in the field of education, engineering, and enforcement could be used in better ways. This study attempts to test the hypothesis mentioned earlier. The investigated personal background includes the following characteristics: gender, type, age, nationality, and educational background. The data was reduced from vast number of pedestrian injury accident reports in the Kingdom of Bahrain. The actual accident records were categorized according to these characteristics and compared to their exposure risk. It was assumed that the exposure risk, which is the expected number of accidents for each category of the pedestrians, was in proportion to their presence in the pedestrian population. Another study was carried out in parallel to observe the pedestrian characteristics in Bahrain. The results of the two studies were analyzed statistically using Chi-square method to compare the actual to the expected accident frequencies. The whole Kingdom of Bahrain population statistics were used wherever the information on the pedestrian population was not available. The findings revealed that personal characteristics considered in this study have significant influence on pedestrian’s involvement in traffic accidents. The results also showed that pedestrians with the following characteristics were probably showing risk to exposure to accidents more than other categories: male, young (0–12 years) and old (50 years and over), non-local, and those with low educational background.     

Nighttime effectiveness of the pedestrian hybrid beacon,rectangular rapid flashing beacon,and LED-embedded crossing sign

Introduction: A large majority of pedestrian fatal crashes occurred during the nighttime. The focus of this research was to identify if the following pedestrian crossing treatments were more or less effective at night: pedestrian hybrid beacon (PHB), rectangular rapid flashing beacon (RRFB), or LED-embedded crossing warning sign (LED-Em). Method: For each treatment, two statistical evaluations were used on the staged pedestrian data: ANCOVA models that considered per site mean yield rates and logistic regression that considered the individual driver response to the crossing pedestrian. Results: For the PHB, essentially no difference was found between the very high daytime and nighttime driver yielding values. The research found RRFBs to be more effective at night, and the LED-Em to be more effective during the day. Using the results from the logistic regression evaluation, higher driver yielding was observed at LED-Em sites in the lower speed limit group (30 or 35 mph (48.3 or 56.3 kph), with 2 lanes (rather than 4 lanes), with narrow lanes of 10.5 or 11 ft (3.2 or 3.4 m) widths (rather than 11.5 or 12 ft (3.5 or 3.7 m) widths), and lower hourly volumes. The results from the ANCOVA model for LED-Ems also showed a statistically significant difference for yield lines (higher yielding when present). Conclusions: This analysis represents the only known study to date on the effectiveness of pedestrian crossing treatments at night. Practical Applications: This study provides additional support for the PHB as a treatment because the PHB was found to be highly effective during the nighttime as well as the daytime. The value of using advance yield lines was also demonstrated. The findings offer a caution regarding the use of the LED-Em treatment on higher speed, higher volume, or wider roads.     

Fatal pedestrian crashes on interstates and other freeways in the United States

Introduction: More than 800 pedestrians die annually in crashes on interstates and other freeways in the United States, but few studies have examined their characteristics. Method: Data from the Fatality Analysis Reporting System on pedestrians fatally injured during 2015–2017 were analyzed. Chi-square tests compared characteristics of pedestrians killed on interstates and other freeways with those that died on other roads, and across crash types among freeway deaths. Land use characteristics of locations where pedestrians were killed while crossing freeways in a large state (California) were identified using Google Earth. Results: A larger proportion of pedestrians killed on freeways died on dark and unlit roads (48% vs. 32%), were male (78% vs. 68%), or were ages 20–44 (55% vs. 32%) compared with pedestrians killed on other roads. Crossing (42%) was the most common crash type among pedestrian deaths on freeways, followed by disabled-vehicle-related crashes (18%). Pedestrians who died while crossing more often had blood alcohol concentrations ≥ 0.08 g/dL (40%) than those in disabled-vehicle-related (22%) or other crashes (34%). Deaths in crossing crashes were more likely than other freeway deaths to occur on urban roads (81%), at speed limits ≤50 mph (13%), or between 18:00 and 23:59 (49%), and 58% of crossing crashes analyzed for land use were located between residential and other (e.g., commercial, recreational) uses. Over a third (37%) of deaths in disabled-vehicle-related crashes occurred at speed limits ≥70 mph. Conclusions: A surprising proportion of pedestrian deaths occur on controlled-access roads not designed for walking. Countermeasures for these crashes need to be implemented to see meaningful reductions in pedestrian fatalities overall. Practical applications: Improving roadway and vehicle lighting, requiring reflective warning devices for marking disabled vehicles, constructing pedestrian overpasses and underpasses in areas frequently crossed, and promoting alternative means of traveling between residential and commercial areas could help.     

Pedestrians' estimates of their own visibility: a simple and effective computer-based technique

INTRODUCTION: Research has shown that both pedestrians and drivers drastically overestimate pedestrians' nighttime visibility (NHSTSA, 2008a, 2008b; Owens & Sivak, 1996) and fail to appreciate the safety benefits of proven conspicuity aids. One solution is educational intervention (Tyrrell, Patton, & Brooks, 2004); however, the on-road assessment of its effectiveness is expensive and time consuming. METHOD: Experiment One introduces a computer-based alternative to the field-based approach, successfully replicating the previous study's trends among 94 students who either receive or do not receive an educational lecture. Experiment Two utilizes the simulation's portability to determine if professional roadway workers have a more accurate understanding of pedestrian conspicuity than students. Results: Results among 88 workers show they do not significantly appreciate the advantages of effective retroflective material configurations or vehicle headlamp settings, for example, any better than non-lectured students in Experiment One. Impact: The study's results demonstrate the need for education among all pedestrians and the benefits of efficient testing methods.     

Pedestrians under influence (PUI) crashes: Patterns from correspondence regression analysis

Introduction: Alcohol-related impairment is a key contributing factor in traffic crashes. However, only a few studies have focused on pedestrian impairment as a crash characteristic. In Louisiana, pedestrian fatalities have been increasing. From 2010 to 2016, the number of pedestrian fatalities increased by 62%. A total of 128 pedestrians were killed in traffic crashes in 2016, and 34.4% of those fatalities involved pedestrians under the influence (PUI) of drugs or alcohol. Furthermore, alcohol-PUI fatalities have increased by 120% from 2010 to 2016. There is a vital need to examine the key contributing attributes that are associated with a high number of PUI crashes. Method: In this study, the research team analyzed Louisiana’s traffic crash data from 2010 to 2016 by applying correspondence regression analysis to identify the key contributing attributes and association patterns based on PUI involved injury levels. Results: The findings identified five risk clusters: intersection crashes at business/industrial locations, mid-block crashes on undivided roadways at residential and business/residential locations, segment related crashes associated with a pedestrian standing in the road, open country crashes with no lighting at night, and pedestrian violation related crashes on divided roadways. The association maps identified several critical attributes that are more associated with fatal and severe PUI crashes. These attributes are dark to no lighting, open country roadways, and non-intersection locations. Practical Applications: The findings of this study may be used to help design effective mitigation strategies to reduce PUI crashes.     

Modeling pedestrian gap crossing index under mixed traffic condition

IntroductionThere are a variety of challenges faced by pedestrians when they walk along and attempt to cross a road, as the most recorded accidents occur during this time. Pedestrians of all types, including both sexes with numerous aging groups, are always subjected to risk and are characterized as the most exposed road users. The increased demand for better traffic management strategies to reduce the risks at intersections, improve quality traffic management, traffic volume, and longer cycle time has further increased concerns over the past decade.MethodThis paper aims to develop a sustainable pedestrian gap crossing index model based on traffic flow density. It focusses on the gaps accepted by pedestrians and their decision for street crossing, where (Log-Gap) logarithm of accepted gaps was used to optimize the result of a model for gap crossing behavior. Through a review of extant literature, 15 influential variables were extracted for further empirical analysis. Subsequently, data from the observation at an uncontrolled mid-block in Jalan Ampang in Kuala Lumpur, Malaysia was gathered and Multiple Linear Regression (MLR) and Binary Logit Model (BLM) techniques were employed to analyze the results.Results and conclusionsFrom the results, different pedestrian behavioral characteristics were considered for a minimum gap size model, out of which only a few (four) variables could explain the pedestrian road crossing behavior while the remaining variables have an insignificant effect. Among the different variables, age, rolling gap, vehicle type, and crossing were the most influential variables. The study concludes that pedestrians’ decision to cross the street depends on the pedestrian age, rolling gap, vehicle type, and size of traffic gap before crossing.Practical applicationsThe inferences from these models will be useful to increase pedestrian safety and performance evaluation of uncontrolled midblock road crossings in developing countries.     

Spillover effects of yield-to-pedestrian channelizing devices

A great number of pedestrians are killed or injured in traffic crashes every year in the US. Vehicle crashes involving pedestrians are often more severe than other crashes because pedestrians are unprotected and are hence more likely to suffer injuries or death if struck by a motor vehicle. To improve pedestrian safety, a variety of treatments such as overhead flashing beacons, in-street crossing signs, in-roadway warning lights, and traffic calming measures have been used. One treatment, in-street yield-to-pedestrian channelizing devices (YTPCD), has been used in many states, including Pennsylvania, where approximately 10% of traffic crash fatalities are pedestrians each year.In an effort to improve pedestrian safety, the Pennsylvania Department of Transportation (PennDOT) has widely deployed YTPCD. This study examines the spillover (indirect) effects of such devices on motorist and pedestrian behavior. With data collected from eight sites that did not have but were in the vicinity of YTPCD implementations, analysis results show that such devices have significantly positive spillover effects on pedestrian safety at intersections, but they tend to have negative spillover effects at mid-block locations. Overall, the YTPCD appear to have a positive impact on changing motorist and pedestrian behavior, and merit consideration for future usage of this type of device.     

Prediction of drivers and pedestrians' behaviors at signalized mid-block Danish offset crosswalks using Bayesian networks

Introduction: This study presents the prediction of driver yielding compliance and pedestrian tendencies to press pushbuttons at signalized mid-block Danish offset crosswalks. Method: It applies Bayesian Networks (BNs) analysis, which is basically a graphical non-functional form model, on observational survey data collected from five signalized crosswalks in Las Vegas, Nevada. The BNs structures were learnt from the data by the application of several score functions. By considering prediction accuracy and the Area under the Receiver Operating Characteristic (ROC) curves, the BN learnt using the Bayesian Information Criterion (BIC) score resulted as the best network structure, compared to the ones learnt using K2 and the Akaike Information Criterion (AIC). The BIC score-based structure was then used for parameter learning and probabilistic inference. Results: Results show that, when considering an individual scenario, the highest predicted yielding compliance (81%) is attained when pedestrians arrive at the crosswalk while the flashes are active, whereas the lowest predicted yielding compliance (23.4%) is observed when the pedestrians cross between the yield line and advanced pedestrian crosswalk sign. On the other hand, crossing within marked stripes, approaching the crosswalk from the near side of the pushbutton pole, inactive flashing lights, and being the first to arrive at the crosswalk result in relatively high-predicted probabilities of pedestrians pressing pushbutton. Furthermore, with a combination of scenarios, the maximum achievable predicted yielding probability is 87.5%, while that of pressing the button was 96.3%. Practical applications: Traffic engineers and planners may use these findings to improve the safety of crosswalk users.     

A study of fatal pedestrian crashes at rural low-volume road intersections in southwest China

Objective: Although intersections correspond to a small proportion of the entire roadway system, they account for a disproportionally high number of fatal pedestrian crashes, especially on rural roads situated in low- and middle-income countries. This article examines pedestrian safety at rural intersections and suggests applicable accident prevention treatments by providing an in-depth analysis of 28 fatal pedestrian crashes from 8 low-volume roads in southwest China.

Methods: The driving reliability and error analysis method (DREAM) is a method to support a systematic classification of accident causation information and to facilitate aggregation of that information into patterns of contributing factors. This is the first time that DREAM was used to analyze pedestrian–vehicle crashes and provide suggestions for road improvements in China.

Results: The key issues adversely affecting pedestrian safety can be organized in 4 distinctive thematic categories, namely, deficient intersection safety infrastructure, lack of pedestrian safety education, inadequate driver training, and insufficient traffic law enforcement. Given that resources for traffic safety investments in rural areas are limited, it is determined that the potential countermeasures should focus on low-cost, easily implementable, and long-lasting measures increasing the visibility and predictability of pedestrian movement and reducing speeding and irresponsible driving among drivers and risk-taking behaviors among pedestrians.

Conclusions: Accident prevention treatments are suggested based on their suitability for rural areas in southwest China. These countermeasures include introducing better access management and traffic calming treatments, providing more opportunities for pedestrian education, and enhancing the quality of driver training and traffic law enforcement.     

Head injuries in child pedestrian accidents--in-depth case analysis and reconstructions

OBJECTIVE: The aim of this study was to investigate head injuries, injury risks, and corresponding tolerance levels of children in car-to--child pedestrian collisions. METHODS: An in-depth accident analysis was carried out based on 23 accident cases involving child pedestrians. These cases were collected with detailed information about pedestrians, cars, and road environments. All 23 accidents were reconstructed using the MADYMO program with mathematical models of passenger cars and child pedestrians developed at Chalmers University of Technology. The contact properties of the car models were derived from the European New Car Assessment Program (EuroNCAP) subsystem tests. RESULTS: The accident analysis demonstrated that the head was the most frequently and severely injured body part of child pedestrians. Most accidents occurred at impact speeds lower than 40 km/h and 98% of the child pedestrians were impacted from the lateral direction. The initial postures of children at the moment of impact were identified. Nearly half (47%) of the children were running, which was remarkable compared with the situation of adult pedestrians. From accident reconstructions it was found that head impact conditions and injury severities were dependent on the shape and stiffness of the car front, impact velocity, and stature of the child pedestrian. Head injury criteria and corresponding tolerance levels were analyzed and discussed by correlating the calculated injury parameters with the injury outcomes in the accidents. CONCLUSIONS: Reducing head injuries should be set as a priority in the protection of child pedestrians. HIC is an important injury criterion for predicting the risks of head injuries in child pedestrian accidents. The tolerance level of head injuries can have a considerable variation due to individual differences of the child pedestrians. By setting a suitable speed limit and improving the design of car front, the head injury severities of child pedestrians can be reduced.     

The conspicuity of first-responder safety garments

Introduction

This study compared the conspicuity of three types of first-responder safety garments (NFPA 1971-2007 turnout gear coats, and ANSI/ISEA 107 and 207 safety vests).

Method

Participants drove instrumented vehicles on a closed track during both daytime and nighttime, indicating when they could first detect pedestrians in a simulated emergency response scene. Pedestrians wore one of the safety garments and stood on either side of the emergency scene, facing or perpendicular to oncoming traffic, and either stationary or walking in place.

Results

All three garment standards provided equal levels of conspicuity, in that the distances at which the pedestrians were detected were equivalent. Time of day was a significant factor, with longer mean detection distances being observed in daytime. Pedestrian orientation was significant, with mean detection distances being longest when facing traffic. Pedestrian motion did not result in significant differences in detection distance.

Discussion

The results suggest that all three garment types studied are equivalent in making first responders conspicuous as pedestrians when working an emergency response scene in close proximity to traffic.

Impact on Industry

Whether an NFPA or ANSI/ISEA compliant is worn, first responders are equally likely to be detected by passing motorists, and as such these garments should be considered to be equivalent.     

Reliability analysis of pedestrian safety crossing in urban traffic environment

This paper describes the pedestrian safety crossing behaviour at signalized crosswalks in an urban traffic environment based on human reliability analysis. In our research, pedestrians’ waiting durations are modelled by a non-parametric and two parametric reliability models that recognize the effects of covariates. The covariates include pedestrian personal characteristics and urban traffic conditions in order to reflect the effects of human factors and internal environment comprehensively. The results indicate that most pedestrians show distinct time-dependent reliability but a few pedestrians are too impatient to wait for the lights changes.