Molecularly imprinted polymers for the detection of benomyl residues in water and soil samples

Benomyl is a benzimidazol fungicide used against various crop pathogens. Although banned in many countries, it is still widely used worldwide and is listed in different monitoring programs among the substances to be monitored to assess human exposure to pesticide residues. The assessment of benomyl is mainly based on the analysis of the residues of its most important metabolite, carbendazim. Existing methods often lack of selectivity and display a limited performance because of the presence of co-extracted compounds. Molecularly imprinted polymers (MIPs) offer an alternative methodology, adsorbing preferentially those target molecules for which the polymers are specifically prepared. In this study, we optimized the synthesis of a polymer imprinted with benomyl. Tests of specificity recognition showed a good performance for carbendazim compared with other similar pesticides. The mean recovery of benomyl (measured as carbendazim) from water samples was estimated to be 90% for MIPs while with real soil samples collected in Morocco the recovery efficiency was 62%. Preliminary tests also suggest that this MIP can implement traditional SPE techniques for assessing benomyl residual concentrations in environmental samples.     

Formulation factors that can reduce the formation of the phytotoxic impurity, N,N'-dibutylurea, from benomyl

Fungicide benomyl is easily decomposed to carbendazim (MBC) and butyl isocyanate (BIC) in formulation, BIC is further hydrolyzed to butylamine. The BIC also reacts with butylamine to form N,N'-dibutylurea (DBU), a phytotoxic compound. The purpose of this study was to investigate the effects of selected additives and the manufacturing method of benomyl water dispersible granules (WG) on reducing DBU content in benomyl formulations. The manufacturing methods studied were granulation by extrusion, fluid bed spray, and spray dry. For the extrusion method, each benomyl powder formulation was homogenized by kneading with 20% v/w of 95% ethanol instead of water. After granulation, the percentages of the active ingredient benomyl and its degradation product carbendazim in each formulation were determined. For the fluid bed spray method, two formulations of wettable powders were formed. The first sample was granulated using 5% Na(2)SO(4) as the binder solution; the second sample used 2% urea. Changes in the active ingredient content after granulation were determined for each sample. For the spray dry method, four basic formulations of 70% benomyl, 5% sodium dodecyl sulfate (SDS) and 10% or 20% sodium sulfate were prepared, to study the effects of HMTA, urea and dispersant on reducing DBU formation in formulation. The DBU content of each formulation was measured for the fresh samples and after 1 year of storage. The results showed that urea had a stabilizing effect on benomyl, and reduced DBU formation. BIC increased benomyl yield during manufacturing, which reduced DBU content in fresh samples but allowed a greater potential for future DBU formation since it did not stabilize the extra benomyl. HMTA was found to reduce DBU in both aqueous BIC and prepared formulations. The study discusses how each of the selected constituents affected DBU formation and how commercial formulations can be improved to reduce DBU formation. From this study, it is clear that a safer benomyl formulation can be developed.     

In vitro toxicity of selected fungicides from the groups of benzimidazoles and demethylation inhibitors to Cladobotryum dendroides and Agaricus bisporus

Twenty microfungal isolates were collected from diseased fruiting bodies of Agaricus bisporus sampled from Serbian mushroom farms during 2003–2007. Based on morphological characteristics and pathogenicity tests, the isolates were identified as Cladobotryum dendroides. The isolates of C. dendroides and A. bisporusF56 and U3 were tested for sensitivity to several selected fungicides in vitro. C. dendroides isolates were found to be more sensitive to prochloraz manganese and flusilazole + carbendazim than to the other fungicides tested (EC₅₀ values were 0.09 and 0.11 mg L^{? 1}, respectively) and weakly resistant to thiophanate-methyl (EC₅₀ values ranged between 6.53 and 12.09 mg L^{? 1}). Selectivity indexes of the tested fungicides on both C. dendroidesand A. bisporusindicated that thiophanate-methyl, cyproconazole + carbendazim and flusilazole + carbendazim had much less selective fungitoxicity than benomyl, carbendazim and prochloraz manganese.     

Photochemical behaviour of carbendazim in aqueous solution

To elucidate the photochemical behaviour of carbendazim (or MBC) in superficial waters, photolysis studies have been carried out in aqueous solutions at several pH using a UV light source (high pressure mercury arc lamp) or a solar light simulator (xenon arc lamp). The kinetics of photodecomposition of carbendazim was determined using HPLC-DAD and the identification of photoproducts was carried out with HPLC-MS (ESI negative and positive mode). According to the experimental results carbendazim is a rather stable molecule in the dark or in environmental conditions. The pH influence of the environmental medium on the photodegradation rate has been confirmed. The photochemical process can be considerably accelerated in alkaline solutions using HPK-quartz irradiation (quantum efficiency at pH 9 phi = 3.1 x 10(-3) degraded molecule per absorbed photon) while the photodegradation is not as efficient under a simulated sun irradiation (quantum efficiency in the suntest phi = 10(-4) at pH 7). Three photoproducts have been tentatively identified in pure water: 2-aminobenzimidazole, benzimidazole isocyanate and monocarbomethoxy-guanidine (issued from the cleavage of the benzimidazole ring). The last one seems very stable and could be accumulated in the environment.     

Degradation of benomyl, picloram, and dicamba in a conical apparatus by zero-valent iron powder

Reduction of some pesticides (benomyl, picloram, and dicamba) was studied in an aerobic batch conical pilot system to investigate the disappearance of these pesticides on contact with iron powder (20 g/l, 325-mesh). Aqueous buffered solutions of the compounds were added to the system followed by zero-valent iron powder (ZVIP), and the decline in the pesticide concentrations was monitored over time. HPLC analyses show a complete disappearance of picloram (1.20 mg/l) after 20 min of reaction. Benomyl (1.00 mg/l) and dicamba (1.25 mg/l) disappear after 25 and 40 min, respectively. The t₅₀ values ranged from 3 to 5.5 min, and were about slightly less than the t_1/2 values reported when the log of the relative HPLC peak area was plotted versus time, where the relative peak area was calculated by dividing the measured peak area by the initial peak area. Pathways for the degradation of the studied pesticides by ZVIP are proposed.     

Supervised neural computing solutions for fluorescence identification of benzimidazole fungicides. Data and decision fusion strategies

Benzimidazole fungicides (BFs) are a type of pesticide of high environmental interest characterized by a heavy fluorescence spectral overlap which complicates its detection in mixtures. In this paper, we present a computational study based on supervised neural networks for a multi-label classification problem. Specifically, backpropagation networks (BPNs) with data fusion and ensemble schemes are used for the simultaneous resolution of difficult multi-fungicide mixtures. We designed, optimized and compared simple BPNs, BPNs with data fusion and BPNs ensembles. The information environment used is made up of synchronous and conventional BF fluorescence spectra. The mixture spectra are not used in the training nor the validation stage. This study allows us to determine the convenience of fusioning the labels of carbendazim and benomyl for the identification of BFs in complex multi-fungicide mixtures.     

Cyhalofop‐p‐butyl mobility and distribution of residues in soil at various depths

This study was conducted to evaluate cyhalofop‐p‐butyl mobility in a sandy loam soil and subsequent distribution of residues at various depths under field conditions. Soil samples were taken from 0 to 150 cm depths at 3–90 d after rains in lysemeter of 1 and 2 m depths. Cyhalofop‐p‐butyl application at two rates and subsequent precipitation had a significant impact on soil, physico‐chemical properties and herbicide mobility. Precipitation caused substantial mobility of cyhalofop‐p‐butyl in the soil and 1.1–7.6 μg L^?1 of cyhalofop‐p‐butyl was found in leachates. Cyhalofop‐p‐butyl residues in the leachates were probably due to preferential flow through the soil. Cyhalofop‐p‐butyl residues were detected in significant amounts from the soil up to 10 d, later, residues were found below the detection limit but its three transformation products viz., cyhalofop acid, diacid, and phenol were detected.     

Effects of three pesticides on the avoidance behavior of earthworms in laboratory tests performed under temperate and tropical conditions

Little research has been performed on the impact of pesticides on earthworms under tropical conditions. Taking into consideration the often-limited resources in tropical countries, simple screening tests are needed. Therefore, it was investigated whether three pesticides relevant for the Brazilian Amazon (benomyl, carbendazim, lambda-cyhalothrin) affect the avoidance behavior of the earthworm Eisenia fetida. The tests were performed for two days according to ISO guideline 17512 but were adapted to tropical conditions (i.e. test substrate, test organism and temperature). The results indicate that this test gives reproducible and reliable results. Toxicity values (NOEC, EC50) are lower than those determined in 14 day-acute mortality tests and are approximately in the same range such as those found in 56 day-chronic reproduction tests with the same earthworm species, which were performed in parallel. Therefore, the use of the earthworm avoidance tests is recommended as a screening tool for the risk assessment of pesticides.     

Terrestrial avoidance behaviour tests as screening tool to assess soil contamination

To assess soil quality and risk assessment, bioassays can be useful tools to gauge the potential toxicity of contaminants focusing on their bioavailable fraction. A rapid and sublethal avoidance behaviour test was used as a screening tool with the earthworm Eisenia andrei and the isopod Porcellionides pruinosus, where organisms were exposed during 48 h to several chemicals (lindane, dimethoate and copper sulphate, for isopods and carbendazim, benomyl, dimethoate and copper sulphate for earthworms). Both species were also exposed to soils from an abandoned mine. For all bioassays a statistical approach was used to derive EC50 values. Isopods and earthworms were able to perceive the presence of toxic compounds and escaping from contaminated to clean soil. Furthermore the behaviour parameter was equally or more sensitive then other sublethal parameters (e.g. reproduction or growth), expressing the advantages of Avoidance Behaviour Tests as screening tools in ERA.     

Influence of environmental factors on degradation of carbendazim by Bacillus pumilus strain NY97-1

The influence of environmental factors on the performance of carbendazim degradation by Bacillus pumilus strain NY97-1 was investigated under aerobic conditions. The carbendazim degradation in culture medium was characterised by High-Performance Liquid Chromatography (HPLC) with UV detector. When the initial concentration of carbendazim was 10, 30, 50, 100, 300 mg/L, the degradation rate was 42.44, 48.97, 77.19, 78.66 and 90.07%, respectively after 24 h at 30°C. Addition of small amount of organic nitrogenous source had a significant influence on carbendazim degradation, while the inorganic nitrogenous source had negative effect. Carbendazim degradation rate varied from 61.55% to 87.76% when pH value within the range of 4–10 after addition of organic nitrogen, the lowest carbendazim degradation percentage of 61.55% was obtained at pH 4.     

Human exposure to 2,4-D following controlled activities on recently sprayed turf.

Total body dose of 2,4-D was determined in 10 volunteers following exposure to sprayed turf 1 hour following application and in 10 volunteers exposed 24 hours following application. Each group of 10 volunteers was divided in half and five wore long pants, a short-sleeved shirt, socks and closed footwear. The other five wore shorts and a short-sleeved shirt and were barefoot. All volunteers were exposed to a 2 by 15 m area of turf for 1 hour during which they alternated between walking and sitting or lying on the turf surface for intervals of 5 minutes. Dislodgeable residues of 2,4-D taken during the exposure sessions showed a rapid decline from 1 hour following application (8%) to 24 hours following application (1%). No detectable residues were found in 4-day urine samples supplied by volunteers except for 3 people who were barefoot and wearing shorts and contacted the turf 1 hour following 2,4-D application. The highest dose was measured in a volunteer who removed his shirt for 30 minutes of the exposure session (426 micrograms). Exposure levels of the other two volunteers who wore the prescribed clothing were lower (153 and 103 micrograms). No detectable residues were found in urine samples supplied by volunteers exposed to sprayed turf 24 hours following application. These results indicate that at the doses measured, exposure to sprayed turf should present little risk in humans. However, people can reduce exposure to non-detectable levels by remaining off treated turf for a period of 24 hours or until after rainfall or irrigation so that dislodgeable residues and therefore potential exposure are essentially zero.     

Dissipation of carbendazim and chloramphenicol alone and in combination and their effects on soil fungal:bacterial ratios and soil enzyme activities

The dissipation of carbendazim and chloramphenicol alone and in combination and their effects on soil fungal:bacterial ratios and soil enzyme activities were investigated. The results revealed that carbendazim dissipation was little affected by chloramphenicol, whereas chloramphenicol dissipation was found to be retarded significantly by the presence of carbendazim. The inhibitory effect of carbendazim on the fungal:bacterial ratios was increased by the presence of chloramphenicol, and the inhibitory effect of chloramphenicol on neutral phosphatase was increased by the presence of carbendazim. Carbendazim increased soil catalase and urease activities, but this increase was partially diminished by the presence of chloramphenicol. Little interaction was observed between carbendazim and chloramphenicol with regard to their influence on soil invertase. The results obtained in this study suggest that combinations of fungicides and antibiotics may alter the compounds’ individual behaviors in soil and their effects on soil enzymes.     

Degradation characteristics of methyl ethyl ketone by Pseudomonas sp. KT-3 in liquid culture and biofilter

With ketone pollution forming an ever-growing problem, it is important to identify a ketone-degrading microorganism and establish its effect. Here, a methyl ethyl ketone (MEK)-degrading bacterium, Pseudomonas sp. KT-3, was isolated and its MEK degradation characteristics were examined in liquid cultures and a polyurethane-packed biofilter. In liquid cultures, strain KT-3 could degrade other ketone solvents, including diethyl ketone (DK), methyl propyl ketone (MPK), methyl isopropyl ketone (MIPK), methyl isobutyl ketone (MIBK), methyl butyl ketone (MBK) and methyl isoamyl ketone (MIAK). The maximum specific growth rate (mumax) of the isolate was 0.136 h(-1) in MEK medium supplemented with MEK as a sole carbon source, and kinetically, the maximum removal rate (Vm) and saturation constant (Km) for MEK were 12.28 mM g(-1)DCW h(-1) (DCW: dry cell weight) and 1.64 mM, respectively. MEK biodegradation by KT-3 was suppressed by the addition of MIBK or acetone, but not by toluene. In the tested biofilter, KT-3 exhibited a>90% removal efficiency for MEK inlet concentrations of around 500 ppmv at a space velocity (SV) of 150 h(-1). The elimination capacity of MEK was more influenced by SV than by the inlet concentration. Kinetic analysis showed that the maximum MEK removal rate (Vm) was 690 g m(-3) h(-1) and the saturation constant (Km) was 490 ppmv. Collectively, these results indicate the polyurethane sequencing batch biofilter with Pseudomonas sp. KT-3 will provide an excellent performance in the removal of gaseous MEK.     

Ultrasensitive determination of carbendazim in water and orange juice using a carbon paste electrode

A carbon paste electrode was used for the electrochemical quantification of carbendazim in water and orange juice samples. Carbendazim oxidation on the electrode surface was found to be controlled by adsorption. The novel electrochemical procedure for carbendazim quantification employed differential pulse voltammetry using a carbon paste electrode under optimal conditions. Carbendazim oxidation currents were linear at concentrations of 2.84 to 45.44 µg L^?1, with a limit of detection of 0.96 µg L^?1. The proposed method was applied to carbendazim quantification in ultrapurified water, river water, and orange juice. Recovery rates in water and orange juice samples were in the 97%–101% range, indicating that the method can be employed to determine carbendazim in these matrices, with advantages including shorter analysis time and lower cost than routine methods such as chromatography or spectroscopy. The electrode showed good reproducibility, remarkable stability, and especially good surface renewability by simple mechanical polishing. The recovery rates observed were highly concordant with those obtained for high-performance liquid chromatography, having a relative standard deviation of less than 1.3%.     

Development of controlled release nanoformulations of carbendazim employing amphiphilic polymers and their bioefficacy evaluation against Rhizoctonia solani

Controlled release nanoformulations of carbendazim (Methyl 1H-benzimidazol-2-ylcarbamate), a systemic fungicide, have been prepared using laboratory synthesized poly(ethylene glycols) (PEGs)-based functionalized amphiphilic copolymers. The release kinetics of carbendazim from developed controlled release (CR) formulations was studied and compared with that of the commercially available 50% Wettable Powder (WP). Further, the bioefficacy evaluation of developed formulations was done against plant pathogenic fungi Rhizoctonia solani by the poison food technique method. The release of maximum amount of carbendazim from developed formulations was dependent on the molecular weight of PEGs and was found to increase with increasing molecular weights. The range of carbendazim release was found to be between 10th to 35th day as compared to commercial formulation which was up to 7th day. The diffusion exponent (n value) of carbendazim in water ranged from 0.37 to 0.52 in the tested formulations. The half-release (t_1/2) values ranged between 9.47 and 24.20 days, and the period of optimum availability (POA) of carbendazim ranged from 9.15 to 26.63 days. Also, ED₅₀ values of the developed formulations vary from 0.40 to 0.74 mg L^?1. These formulations can be used to optimize the release of carbendazim to achieve disease control for the desired period depending on the matrix of the polymer used.     

Chlorophyll a fluorescence, antioxidant enzymes and lipid peroxidation in tomato in response to ozone and benomyl.

Ozone is a widely distributed phytotoxic air pollutant and is known to reduce the yield of several important agricultural crops in Spain. However, benomyl has been found to lessen the adverse impact of ozone on plants. We studied the effects of ozone and benomyl on chlorophyll a fluorescence, antioxidant enzymes, and lipid peroxidation in tomato (Lycopersicon esculentum Mill. cv. Tiny Tim) grown in open-top chambers in the field. Our results indicate that benomyl prevented the peroxidation of membrane lipids and increased protection of PSII from ozone. There was also a significant reduction in the activity of the antioxidant enzyme superoxide dismutase in ozone-exposed plants that had not been treated with benomyl. Comparing plants treated with benomyl to untreated plants we found that, on exposure to ozone, a greater fraction of light absorption energy was cycled through the photosynthetic system in benomyl-treated plants, as shown by the higher PSII-mediated electron flow and the higher fraction of open PSII reaction centers. The values analyzed in the fluorescence parameters and lipid peroxidation were similar for plants without benomyl grown in a charcoal-filtered environment and benomyl-treated plants exposed to ozone.     

Grab and passive sampling applied to pesticide analysis in the São Lourenço river headwater in Campo Verde – MT,Brazil

In this study, the quality of surface water in the headwaters of São Lourenço River in Mato Grosso, Brazil, was evaluated in relation to contamination by pesticides. For this purpose, samples were collected between December 2015 and June 2016 by grab sampling and by passive sampling using an integrative polar organic compound sampler installed in the field during four 14-day cycles between March and June 2016. The analyses were performed by gas chromatography (CG/MS) and by liquid chromatography (UPLC-MS/MS). The results showed the detection of two pesticides (atrazine and pyraclostrobin) of the five analyzed by passive sampling and eight active principles among the 20 analyzed (malathion, diuron, carbofuran, carbendazim, trifluralin, imidacloprid, metolachlor, and acetamiprid) by grab sampling. The detection of 10 pesticides, even almost a decade after the beginning of a recovery process of the ciliary forest, confirms the headwaters' vulnerability to these contaminants and passive sampling proved to be an important tool in capturing small concentrations of pesticides constituting an interesting complement to grab sampling.     

Prioritizing research for trace pollutants and emerging contaminants in the freshwater environment

Organic chemicals have been detected at trace concentrations in the freshwater environment for decades. Though the term trace pollutant indicates low concentrations normally in the nanogram or microgram per liter range, many of these pollutants can exceed an acceptable daily intake (ADI) for humans. Trace pollutants referred to as emerging contaminants (ECs) have recently been detected in the freshwater environment and may have adverse human health effects. Analytical techniques continue to improve; therefore, the number and frequency of detections of ECs are increasing. It is difficult for regulators to restrict use of pollutants that are a human health hazard; scientists to improve treatment techniques for higher priority pollutants; and the public to modify consumption patterns due to the vast number of ECs and the breadth of literature on the occurrence, use, and toxicity. Hence, this paper examines literature containing occurrence and toxicity data for three broad classes of trace pollutants and ECs (industrials, pesticides, and pharmaceuticals and personal care products (PPCPs)), and assesses the relevance of 71 individual compounds. The evaluation indicates that widely used industrials (BPF) and PPCPs (AHTN, HHCB, ibuprofen, and estriol) occur frequently in samples from the freshwater environment but toxicity data were not available; thus, it is important to establish their ADI. Other widely used industrials (BDE-47, BDE-99) and pesticides (benomyl, carbendazim, aldrin, endrin, ethion, malathion, biphenthrin, and cypermethrin) have established ADI values but occurrence in the freshwater environment was not well documented. The highest priority pollutants for regulation and treatment should include industrials (PFOA, PFOS and DEHP), pesticides (diazinon, methoxychlor, and dieldrin), and PPCPs (EE2, carbamazepine, βE2, DEET, triclosan, acetaminophen, and E1) because they occur frequently in the freshwater environment and pose a human health hazard at environmental concentrations.     

Adsorption, transformation, and bioavailability of the fungicides carbendazim and iprodione in soil, alone and in combination

When studying the effect of mixtures of toxic substances on soil organisms, attention must be paid to peculiarities in exposure to mixtures as opposed to that of single toxicants. The fungicides carbendazim and iprodione compete in the adsorption to soil. The presence of iprodione reduced the adsorption of carbendazim by 30%, while carbendazim reduced the adsorption of iprodione by 70%. Iprodione had little effect on the transformation rate of carbendazim in soil. However, carbendazim retarded the transformation of iprodione in soil by 26%. The concentration of the fungicides in pore water was found to be substantially higher for mixtures than when a fungicide alone was present in the soil. The effect of the additional fungicide on the concentration is especially apparent in the period following the first 1 to 2 weeks of the incubation. The inclusion of copper in the mixture has little additional effect on the concentration of the fungicides in pore water.     

Bioremediation of Cd and carbendazim co-contaminated soil by Cd-hyperaccumulator Sedum alfredii associated with carbendazim-degrading bacterial strains

The objective of this study was to develop a bioremediation strategy for cadmium (Cd) and carbendazim co-contaminated soil using a hyperaccumulator plant (Sedum alfredii) combined with carbendazim-degrading bacterial strains (Bacillus subtilis, Paracoccus sp., Flavobacterium and Pseudomonas sp.). A pot experiment was conducted under greenhouse conditions for 180 days with S. alfredii and/or carbendazim-degrading strains grown in soil artificially polluted with two levels of contaminants (low level, 1 mg kg^?1 Cd and 21 mg kg^?1 carbendazim; high level, 6 mg kg^?1 Cd and 117 mg kg^?1 carbendazim). Cd removal efficiencies were 32.3–35.1 % and 7.8–8.2 % for the low and high contaminant level, respectively. Inoculation with carbendazim-degrading bacterial strains significantly (P?<?0.05) increased Cd removal efficiencies at the low level. The carbendazim removal efficiencies increased by 32.1–42.5 % by the association of S. alfredii with carbendazim-degrading bacterial strains, as compared to control, regardless of contaminant level. Cultivation with S. alfredii and inoculation of carbendazim-degrading bacterial strains increased soil microbial biomass, dehydrogenase activities and microbial diversities by 46.2–121.3 %, 64.2–143.4 %, and 2.4–24.7 %, respectively. Polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) analysis revealed that S. alfredii stimulated the activities of Flavobacteria and Bradyrhizobiaceae. The association of S. alfredii with carbendazim-degrading bacterial strains enhanced the degradation of carbendazim by changing microbial activity and community structure in the soil. The results demonstrated that association of S. alfredii with carbendazim-degrading bacterial strains is promising for remediation of Cd and carbendazim co-contaminated soil.