Impact of individual resilience and safety climate on safety performance and psychological stress of construction workers: A case study of the Ontario construction industry

IntroductionThe construction industry has hit a plateau in terms of safety performance. Safety climate is regarded as a leading indicator of safety performance; however, relatively little safety climate research has been done in the Canadian construction industry. Safety climate may be geographically sensitive, thus it is necessary to examine how the construct of safety climate is defined and used to improve safety performance in different regions. On the other hand, more and more attention has been paid to job related stress in the construction industry. Previous research proposed that individual resilience may be associated with a better safety performance and may help employees manage stress. Unfortunately, few empirical research studies have examined this hypothesis. This paper aims to examine the role of safety climate and individual resilience in safety performance and job stress in the Canadian construction industry.MethodThe research was based on 837 surveys collected in Ontario between June 2015 and June 2016. Structural equation modeling (SEM) techniques were used to explore the impact of individual resilience and safety climate on physical safety outcomes and on psychological stress among construction workers.ResultsThe results show that safety climate not only affected construction workers' safety performance but also indirectly affected their psychological stress. In addition, it was found that individual resilience had a direct negative impact on psychological stress but had no impact on physical safety outcomes.ConclusionsThese findings highlight the roles of both organizational and individual factors in individual safety performance and in psychological well-being.Practical applicationsConstruction organizations need to not only monitor employees' safety performance, but also to assess their employees' psychological well-being. Promoting a positive safety climate together with developing training programs focusing on improving employees' psychological health — especially post-trauma psychological health — can improve the safety performance of an organization.     

Impact of psychological capital on construction worker safety behavior: Communication competence as a mediator

IntroductionConstruction workers face a work environment of high risk and mental stress. Psychological capital (PsyCap) could influence employee's mental health and work performance. It would be helpful to determine whether PsyCap affects worker safety behavior. However, few studies empirically examined the impacts of the sub-dimensions of PsyCap on the safety behavior in construction settings, reducing the potential practicability of PsyCap to improve workplace safety performance. Thus, this study tested the relationship between sub-dimensions of PsyCap (self-efficacy, hope, resilience, optimism) and safety behaviors (safety compliance, safety participation), while the mediating role of communication competence was also explored. Method: Data were collected from 655 construction workers in China using a psychological capital questionnaire (PCQ). The theoretical model were tested with confirmatory factor analyses (CFA) and structural equation modeling (SEM) techniques. Results: Results show that: (a) the self-efficacy dimension of PsyCap positively affected safety compliance and safety participation, while the resilience dimension positively impacted safety participation; (b) the hope dimension was not directly related to safety behaviors, while the optimism dimension negatively associated with safety participation; and (c) communication competence mediated the relationships between the hope and optimism dimensions of PsyCap and safety participation. Conclusions: A multidimensional perspective on PsyCap should be taken while examining its effects on safety behavior and the individual communication competence helps to enhance construction safety. Findings of this study shed lights on safety behavior promotion practices based on the multidimensional model. Initiating flexible psychological capital training and intervention, and strengthening communication skills of construction employees are suggested to improve safety performance in the construction industry.     

Intersection AEB implementation strategies for left turn across path crashes

Abstract

Objective: Left turn across path with traffic from the opposite direction (LTAP/OD) is the second most frequent car-to-car intersection crash type after straight crossing path (SCP) in Germany and the United States. Intersection automated emergency braking (AEB) for passenger cars can address these crashes.

This study investigates 2 implementation strategies of intersection AEB addressing LTAP/OD crashes: (1) only the turning car is equipped with an intersection AEB and (2) turning and straight-heading cars are equipped with an intersection AEB. For each strategy, the influence of a safety zone around the vehicles that should not be entered is evaluated in terms of accident avoidance, injury mitigation, and change in velocity (delta-V) of remaining accidents. Results are given as a function of market penetration.

Methods: A total of 372 LTAP/OD crashes from the time series precrash matrix (PCM), a subsample of the German In-Depth Accident Study (GIDAS), were resimulated in the PRediction of Accident Evolution by Diversification of Influence factors in COmputer simulation (PRAEDICO) simulation framework. A Kudlich-Slibar rigid-body impact model and an injury risk curve derived from GIDAS were used to predict remaining moderate to fatal (Maximum Abbreviated Injury Scale [MAIS] 2?+?F) injuries among car occupants.

Results: With a safety zone of 0.2 m, when the turning vehicle only was equipped with an intersection AEB, 59% of the crashes were avoided at a 100% market penetration. With both vehicles equipped the percentage increased to 77%. MAIS 2?+?F injured occupants were reduced by 60 and 76%, respectively. Considering both the turning and the straight-heading vehicles, the delta-V decreased strongly with market penetration in remaining left-side impacts but only slightly in remaining frontal and right-side impacts. Eliminating the safety zone substantially decreases effectiveness in all conditions.

Conclusions: Implementation strategy and safety zone definition strongly influence the real-life performance of intersection AEB. AEB should be applied not only for the turning vehicle but also for the straight-going vehicle to benefit from the full potential. Situationally appropriate safety zone definitions, in line with human hazard perception, need more attention and are a key to balance true positive and false positive performance. Remaining delta-V does not decrease broadly; hence, there is no evidence that future LTAP/OD crashes will be generally of lower severity. This highlights the need for continuous development of in-crash protection.     

Integrating safety,health and environmental management systems: A conceptual framework for achieving lean enterprise outcomes

IntroductionExpectations from external stakeholders for eco-safe products and production processes and internal stakeholders for transparent, stable, and robust environment, safety, and health operations have driven high technology organizations to adopt multipart management systems. Organizations can protect workers and the environment and simultaneously contribute to lean management principles by implementing integrated management systems. This research adds to the existing discourse and theory pertaining to the integration of environment, safety, and health management systems. Methods: The research was exploratory and inductive in nature and used mixed methods. Specifically, qualitative methods included use of an iterated Delphi method to elicit information from a panel of experts and detailed case studies conducted at four high technology performance manufacturing firms, while quantitative analysis of variance of correlated data investigated the within-firm and between-firm variability in motivating factors for adopting integrated systems and methods used for implementing integrated systems. Results: The results offer an integrated-lean management system framework and the strategies available and used by a sample of high technology performance organizations to simultaneously protect workers, the environment, and support lean enterprise outcomes. Practical applications: Organizations can protect workers, the environment, and simultaneously contribute to lean management principles by implementing integrated management systems requiring joint management that allow for the shared design, evaluation, and continuous improvement of environmental, safety, and health practices that are compatible with the lean enterprise movement in today’s high-performance driven organizations.     

Actual safety performance of the Malaysian offshore oil platforms: Correlations between the leading and lagging indicators

IntroductionThis study establishes the correlations between performance of a set of key safety factors and the actual lagging performance of oil platforms in Malaysia, hence the relevance of the key safety factors in evaluating and predicting the safety performance of oil and gas platforms. The key factors are crucial components of a safety performance evaluation framework and each key safety factor corresponds to a list of underlying safety indicators.MethodIn this study, participating industrial practitioners rated the compliance status of each indicator using a numbering system adapted from the traffic light system, based on the actual performance of 10 oil platforms in Malaysia. Safety scores of the platforms were calculated based on the ratings and compared with the actual lagging performance of the platforms. Safety scores of two platforms were compared with the facility status reports' findings of the respective platforms.ResultsThe platforms studied generally had good performance. Total recordable incident rates of the platforms were found to show significant negative correlations with management and work engagement on safety, compliance score for number of incident and near misses, personal safety, and management of change. Lost time injury rates, however, correlated negatively with hazard identification and risk assessment. The safety scores generally agreed with findings of the facility status reports with substandard process containment found as a contributor of hydrocarbon leaks.ConclusionsThis study proves the criterion validity of the safety performance evaluation framework and demonstrates its usability for benchmarking and continuous improvement of safety practices on the Malaysian offshore oil and gas platforms.Practical applicationsThis study reveals the applicability of the framework and the potential of extending safety reporting beyond the few conventional lagging safety performance indicators used. The study also highlights the synergy between correlating safety factors to streamline safety management on offshore platforms.     

Assessment and improvement of integrated HSE and macro-ergonomics factors by fuzzy cognitive maps: The case of a large gas refinery

This study analyzes and assesses the integrated health, safety, environment (HSE) and ergonomics (HSEE) factors by fuzzy cognitive maps (FCM) approach. This is achieved through integrating ergonomic and macro-ergonomic as well as occupational health and safety arrangements in an integrated modeling for assessment of their multi-faceted impact on workers' productivity, injury rate and satisfaction. This paper uses FCM to assess the direct and indirect effects of HSEE factors on system performance indicators. The results of FCM are used to develop leading indicators useful for proactive management of productivity, injury rate, and job satisfaction. The result of a comprehensive survey of 37 experts in control rooms and maintenance activities in a large gas refinery is used to show the applicability and usefulness of FCM approach. Moreover, FCM results are used to determine the causal structure of HSEE factors and system performance indicators. It is concluded that macro-ergonomics factors such as instructions and education, familiarity with organization's rules, and proper communications most contribute to improve workers' safety, satisfaction, and productivity.     

Unintended consequences of management strategies for improving labor productivity in construction industry

Introduction: Labor productivity and safety are important topics in the construction industry. Even so, the literature provides little information for project managers trying to determine how management strategies designed to improve labor productivity impact safety. Method: This research addresses the gap by measuring the impact of two groups of management strategies that involve human resource related management strategies and construction related management strategies related to safety performance in construction projects. Data were collected from 111 general construction projects through the survey. Results: The results show that the relationship between the implemented management strategies and safety performance is nuanced with ‘Communication’ harming safety performance while implementation of ‘Labor Management,’ ‘Supervision and Leadership,’ ‘Planning’ and ‘Management of Construction’ strategies improve the level of safety performance. This study took a further step by measuring the impact of the interactions between the two groups of management strategies on safety performance. The results show that the interactions of construction and human related management strategies are not always in the favor of safety. Practical Applications: This paper adds to the literature on the relationship between productivity and safety in the construction industry. The research findings can assist project managers to improve labor productivity without harming the safety of laborers unintentionally.     

Implementing risk management to reduce injuries in the U.S. Fire Service

IntroductionRisk management, a proactive process to identify and mitigate potential injury risks and implement control strategies, was used to reduce the risk of occupational injury in a fire department. The objective of this research was to study the implementation of the risk management process for future replication. A second objective was to document changes in fire personnel's knowledge, attitudes, and behaviors related to the selected control strategies that were implemented as part of the risk management process.MethodA number of control strategies identified through the risk management process were implemented over a 2-year period beginning in January 2011. Approximately 450 fire personnel completed each of the three cross-sectional surveys that were administered throughout the implementation periods. Fire personnel were asked about their awareness, knowledge, and use of the control strategies.ResultsFire personnel were generally aware of the control strategies that were implemented. Visual reminders (e.g., signage) were noted as effective by fire personnel who noticed them. Barriers to use of specific control strategies such as new procedures on the fireground or new lifting equipment for patient transfer included lack of knowledge of the new protocols, lack of awareness/access to/availability of the new equipment, and limited training on its use. Implementation challenges were noted, which limited self-reported adherence to the control strategies.ConclusionsFire personnel generally recognized the potential for various control strategies to manage risk and improve their health and safety; however, implementation challenges limited the effectiveness of certain control strategies. The study findings support the importance of effective implementation to achieve the desired impacts of control strategies for improving health and safety.Practical applicationsEmployees must be aware of, have knowledge about, and receive training in safety and health interventions in order to adopt desired behaviors.     

Investigating the different characteristics of weekday and weekend crashes

IntroductionThis study provides a systematic approach to investigate the different characteristics of weekday and weekend crashes.MethodWeekend crashes were defined as crashes occurring between Friday 9 p.m. and Sunday 9 p.m., while the other crashes were labeled as weekday crashes. In order to reveal the various features for weekday and weekend crashes, multi-level traffic safety analyses have been conducted. For the aggregate analysis, crash frequency models have been developed through Bayesian inference technique; correlation effects of weekday and weekend crash frequencies have been accounted. A multivariate Poisson model and correlated random effects Poisson model were estimated; model goodness-of-fits have been compared through DIC values. In addition to the safety performance functions, a disaggregate crash time propensity model was calibrated with Bayesian logistic regression model. Moreover, in order to account for the cross-section unobserved heterogeneity, random effects Bayesian logistic regression model was employed.ResultsIt was concluded that weekday crashes are more probable to happen during congested sections, while the weekend crashes mostly occur under free flow conditions. Finally, for the purpose of confirming the aforementioned conclusions, real-time crash prediction models have been developed. Random effects Bayesian logistic regression models incorporating the microscopic traffic data were developed. Results of the real-time crash prediction models are consistent with the crash time propensity analysis. Furthermore, results from these models would shed some lights on future geometric improvements and traffic management strategies to improve traffic safety.Impact on IndustryUtilizing safety performance to identify potential geometric improvements to reduce crash occurrence and monitoring real-time crash risks to pro-actively improve traffic safety.     

Managing active cultural differences in U.S. construction workplaces: Perspectives from non-Hispanic workers

IntroductionCurrent census reports indicate a growing shift toward workforce diversity in the U.S. construction industry, which is largely the result of increasing participation from the Hispanic community. The data also suggest that the Hispanic workforce suffers a higher rate of fatal injuries compared to their non-Hispanic counterparts. Therefore, there is a dire need to develop and utilize new management tools and strategies to accommodate the differences in language and culture of this incoming labor force.MethodThe absence of these tools and strategies poses several challenges including cost overrun, schedule delay, and more importantly, higher workplace injury rates. This study aims to provide a better understanding of the contribution of cultural diversity as a factor that may influence the overall site safety.ResultsAs a result, this study provides further evidence that indicate that the current findings regarding the influence of active cultural differences are reliable, valid, and needs attention. Furthermore, the study provides sub-analysis results of cultural values among Hispanic workers, which suggest that workers from Mexico are less likely to speak up on safety issues when compared to other Hispanic workers. Therefore, this study has both practical and theoretical implications for managing workforce diversity and related safety performance in the U.S. construction industry. The results of the study can be used by employers and managers to adopt responsive strategies and tools to reduce the likelihood of fatal and nonfatal injuries among Hispanic workers.     

Predicting commercial fishing vessel disasters through a novel application of the theory of man-made disasters

Introduction: Vessel disasters (e.g., sinkings, capsizings) are a leading contributor to fatalities in the U.S. commercial fishing industry. Primary prevention strategies are needed to reduce the occurrence of vessel disasters, which can only be done by developing an understanding of their causes and risk factors. If less serious vessel casualties (e.g., loss of propulsion, fire, flooding) are predictors of future disasters, then reducing vessel casualties should in turn reduce vessel disasters and the accompanying loss of life. Method: This case-control study examined the association between vessel casualties and disasters using fishing vessels in Alaska during 2010–2015. Results: The findings show that vessels that experienced casualties within a preceding 10-year period were at increased odds of disaster. Other significant predictors included safety decal status and hull material. Practical Applications: The results of this analysis emphasize the importance of implementing vessel-specific preventive maintenance plans. At an industry level, specific prevention policies should be developed focusing on high-risk fleets to identify and correct a wide range of safety deficits before they have catastrophic and fatal consequences.     

Determinants of safety outcomes and performance: A systematic literature review of research in four high-risk industries

IntroductionIn spite of increasing governmental and organizational efforts, organizations still struggle to improve the safety of their employees as evidenced by the yearly 2.3 million work-related deaths worldwide. Occupational safety research is scattered and inaccessible, especially for practitioners. Through systematically reviewing the safety literature, this study aims to provide a comprehensive overview of behavioral and circumstantial factors that endanger or support employee safety.MethodA broad search on occupational safety literature using four online bibliographical databases yielded 27.527 articles. Through a systematic reviewing process 176 online articles were identified that met the inclusion criteria (e.g., original peer-reviewed research; conducted in selected high-risk industries; published between 1980-2016). Variables and the nature of their interrelationships (i.e., positive, negative, or nonsignificant) were extracted, and then grouped and classified through a process of bottom-up coding.ResultsThe results indicate that safety outcomes and performance prevail as dependent research areas, dependent on variables related to management & colleagues, work(place) characteristics & circumstances, employee demographics, climate & culture, and external factors. Consensus was found for five variables related to safety outcomes and seven variables related to performance, while there is debate about 31 other relationships. Last, 21 variables related to safety outcomes and performance appear understudied.ConclusionsThe majority of safety research has focused on addressing negative safety outcomes and performance through variables related to others within the organization, the work(place) itself, employee demographics, and—to a lesser extent—climate & culture and external factors.Practical applicationsThis systematic literature review provides both scientists and safety practitioners an overview of the (under)studied behavioral and circumstantial factors related to occupational safety behavior. Scientists could use this overview to study gaps, and validate or falsify relationships. Safety practitioners could use the insights to evaluate organizational safety policies, and to further development of safety interventions.     

Commentary: Status of road safety in Asia

Objectives: The objective of this article is to assess the status of road safety in Asia and present accident and injury prevention strategies based on global road safety improvement experiences and discuss the way forward by indicating opportunities and countermeasures that could be implemented to achieve a new level of safety in Asia.

Methods: This study provides a review and analyses of data in the literature, including from the World Health Organization (WHO) and World Bank, and a review of lessons learned from best practices in high-income countries. In addition, an estimation of costs due to road transport injuries in Asia and review of future trends in road transport is provided.

Results: Data on the global and Asian road safety problem and status of prevention strategies in Asia as well as recommendations for future actions are discussed. The total number of deaths due to road accidents in the 24 Asian countries, encompassing 56% of the total world population, is 750,000 per year (statistics 2010). The total number of injuries is more than 50 million, of which 12% are hospital admissions. The loss to the economy in the 24 Asian countries is estimated to around US$800 billion or 3.6% of the gross domestic product (GDP).

Conclusions: This article clearly shows that road safety is causing large problems and high costs in Asia, with an enormous impact on the well-being of people, economy, and productivity. In many Asian low- and middle-income countries, the yearly number of fatalities and injuries is increasing. Vulnerable road users (pedestrians, cyclists, and motorcyclists combined) are particularly at risk. Road safety in Asia should be given rightful attention, including taking powerful, effective actions. This review stresses the need for reliable accident data, because there is considerable underreporting in the official statistics. Reliable accident data are imperative to determine evidence-based intervention strategies and monitor the success of these interventions and analyses. On the other hand, lack of good high-quality accident data should not be an excuse to postpone interventions. There are many opportunities for evidence-based transport safety improvements, including measures concerning the 5 key risk factors: speed, drunk driving, not wearing motorcycle helmets, not wearing seat belts, and not using child restraints in cars, as specified in the Decade of Action for Road Safety 2011–2020. In this commentary, a number of additional measures are proposed that are not covered in the Decade of Action Plan. These new measures include separate roads or lanes for pedestrians and cyclists; helmet wearing for e-bike riders; special attention to elderly persons in public transportation; introduction of emerging collision avoidance technologies, in particular automatic emergency braking (AEB) and alcohol locks; improved truck safety focusing on the other road user (including blind spot detection technology; underride protection at the front, rear, and side; and energy-absorbing fronts); and improvements in motorcycle safety concerning protective clothing, requirements for advanced braking systems, improved visibility of motorcycles by using daytime running lights, and better guardrails.     

Developing a competency model for safety professionals: Correlations between competency and safety functions

IntroductionPersonal competency is an important factor influencing individual performance. The objective of this study was to develop a competency model of safety professionals and investigate the factors contributing to their competency to achieve greater safety performance.MethodIn this study, 299 participants (153 safety professionals and 146 safety educators) completed self-administered questionnaires. The response rate was 75%.ResultsThe results of exploratory factor analysis and cluster analysis revealed that the competency scale for safety professionals comprised five factors. Additionally, the factor “safety and health training and management” explained most of the variance in the competency. The multivariate analysis of variance (MANOVA) results showed that the respondents’ perception of professional competency was significantly influenced by the following factors: occupation, age, job tenure, level of education, and work status. Additionally, the Pearson product–moment correlation coefficient analysis indicated that a safety professional's perceived competencies and safety functions were positively correlated.Impact on industryThis study discusses possible reasons for the influence of the factors previously mentioned and explains how the results can contribute to the development of safety competencies and curricula.     

A Fuzzy Model for Assessing Risk of Occupational Safety in the Processing Industry

Abstract

Managing occupational safety in any kind of industry, especially in processing, is very important and complex. This paper develops a new method for occupational risk assessment in the presence of uncertainties. Uncertain values of hazardous factors and consequence frequencies are described with linguistic expressions defined by a safety management team. They are modeled with fuzzy sets. Consequence severities depend on current hazardous factors, and their values are calculated with the proposed procedure. The proposed model is tested with real-life data from fruit processing firms in Central Serbia.     

Investigating ethnic minorities' perceptions of safety climate in the construction industry

IntroductionAn increasing number of ethnic minorities (EMs) have been employed in the construction industry to alleviate severe labor shortages in many countries. Unfortunately, statistics show that EMs have higher fatal and non-fatal occupational injury rates than their local counterparts. However, EMs are often underrepresented in safety climate (SC) research as they are difficult to reach and gauge their perception. A positive relationship has been widely found between SC and safety performance. Understanding the safety perceptions of EMs helps to reduce injuries and improve their safety performance.MethodBased on a sample of 320 EMs from 20 companies in the construction industry, exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were used to identify the SC factors of EMs, and validate the extracted factors, respectively. Multivariate analysis of variance was undertaken to examine mean differences in perceptions of SC by personal characteristics.ResultsThree SC factors for EMs encapsulating 16 variables were identified through EFA. The hypothesized CFA model for a three-factor structure derived from EFA showed a satisfactory goodness-of-fit, composite reliability, and construct validity.ConclusionsThree SC factors were identified, namely: (a) safety management commitment, safety resources, and safety communication; (b) employee's involvement and workmate's influence; and (c) perception of safety rules, procedures and risks. The perceptions of SC differed significantly by nationality, marital status, the number of family members supported, and drinking habit.Practical applicationsThis study reveals the perception of EMs toward SC. The findings highlight the areas for safety improvement and provide leading indicators for safety performance of EMs. The findings are also enlightening for countries with a number of EMs, such as the United Sates, the United Kingdom, Australia, Singapore, and the Middle East.     

The association between subcontractor safety management programs and worker perceived safety climate in commercial construction projects

Problem: Safety management programs (SMPs) are designed to mitigate risk of workplace injuries and create a safe working climate. The purpose of this project was to evaluate the relationship between contractors’ SMPs and workers’ perceived safety climate and safety behaviors among small and medium-sized construction subcontractors. Methods: Subcontractor SMP scores on 18 organizational and project-level safety items were coded from subcontractors’ written safety programs and interviews. Workers completed surveys to report perceptions of their contractor’s safety climate and the safety behaviors of coworkers, crews, and themselves. The associations between SMP scores and safety climate and behavior scales were examined using Spearman correlation and hierarchical linear regression models (HLM). Results: Among 78 subcontractors working on large commercial construction projects, we found striking differences in SMP scores between small, medium, and large subcontractors (p < 0.001), related to a number of specific safety management practices. We observed only weak relationships between SMP scales and safety climate scores reported by 746 workers of these subcontractors (β = 0.09, p = 0.04 by HLM). We saw no differences in worker reported safety climate and safety behaviors by contractor size. Discussion: SMP only weakly predicted safety climate scales of subcontractors, yet there were large differences in the quality and content of SMPs by size of employers. Summary: Future work should determine the best way to measure safety performance of construction companies and determine the factors that can lead to improved safety performance of construction firms. Practical applications: Our simple assessment of common elements of safety management programs used document review and interviews with knowledgeable representatives. These methods identified specific safety management practices that differed between large and small employers. In order to improve construction safety, it is important to understand how best to measure safety performance in construction companies to gain knowledge for creating safer work environments.     

Workers' compensation loss prevention representative contact and risk of lost-time injury in construction policyholders

IntroductionInsurance loss prevention (LP) representatives have access and contact with businesses and employees to provide targeted safety and health resources. Construction firms, especially those smaller in size, are a high-risk population. This research evaluated the association between LP rep contact and risk for lost-time injuries in construction policyholders.MethodsWorkers' compensation data were utilized to track LP rep contact with policyholders and incidence of lost-time injury over time. Survival analysis with repeated events modeling calculated hazard ratios (HR) and 95% confidence intervals (CI).ResultsCompared no LP contact, one contact was associated with a 27% reduction of risk (HR = 0.73, CI = 0.65–0.82), two with a 41% (HR = 0.59, CI = 0.51–0.68), and three or more contacts with a 28% reduction of risk (HR = 0.72, CI = 0.65–0.81).ConclusionsLP reps appear to be a valuable partner in efforts to reduce injury burden. Their presence or contact with policyholders is consistent with reduction in overall incidence of lost-time injuries.Practical applicationsReduction in lost-time injuries, resulting in reduced workers' compensation costs for policyholders and insurance companies, builds a business-case for safety and injury prevention. LP reps are often a low or no-cost benefit for insurance policyholders and may be an important injury prevention resource for small firms and/or those with lack of safety resources and staff.     

Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Abstract

Objective: With the overall goal to harmonize prospective effectiveness assessment of active safety systems, the specific objective of this study is to identify and evaluate sources of variation in virtual precrash simulations and to suggest topics for harmonization resulting in increased comparability and thus trustworthiness of virtual simulation-based prospective effectiveness assessment.

Methods: A round-robin assessment of the effectiveness of advanced driver assistance systems was performed using an array of state-of-the-art virtual simulation tools on a set of standard test cases. The results were analyzed to examine reasons for deviations in order to identify and assess aspects that need to be harmonized and standardized. Deviations between results calculated by independent engineering teams using their own tools should be minimized if the research question is precisely formulated regarding input data, models, and postprocessing steps.

Results: Two groups of sources of variations were identified; one group (mostly related to the implementation of the system under test) can be eliminated by using a more accurately formulated research question, whereas the other group highlights further harmonization needs because it addresses specific differences in simulation tool setups. Time-to-collision calculations, vehicle dynamics, especially braking behavior, and hit-point position specification were found to be the main sources of variation.

Conclusions: The study identified variations that can arise from the use of different simulation setups in assessment of the effectiveness of active safety systems. The research presented is a first of its kind and provides significant input to the overall goal of harmonization by identifying specific items for standardization. Future activities aim at further specification of methods for prospective assessments of the effectiveness of active safety, which will enhance comparability and trustworthiness in this kind of studies and thus contribute to increased traffic safety.